0EQUIPMENT_ATTR; DATE FROM & DATE TO objects are not available

Hi,
In the equipment masters iam getting the FROM DATE & TO DATE, even when iam scheduling the info package, master data is getting loaded based on these dates. once after loading iam able to see the FROM DATE & TO DATE data at object level.
But when i want to use the same date fileds at report level to check the equipment usage period based on the functional location means these objects are not even available as attributes at report level.
Can any body suggest me the approach how i can get these fields at report level and make use of them.
Regards,
Prabhakar.

Similar Messages

Some performance counter objects are not available for a 32-bit process on 64-bit versions of Windows Server 2012 standard

When we try to gather performance counter information for a 32-bit process on a 64-bit computer that is running Microsoft Windows Server 2012, all our performance counter objects are not available with 32 bit perfmon application (C:\Windows\SysWOW64\perfmon.exe)
I didn't notified any errors while registering our counter objects or while running Perfmon.exe
Note: Same counter objects are available and working fine with Windows Server 2008 R2.
for diagnostic our counters on WIN2012, ran command as follows:
cd c:\windows\sysWOW64
lodctr /Q
I am able to see all our counter objects on response and infact all were shown as enabled, as shown below
Appreciate quiclk response with solution or clues to diagnose it more details.
Thanks & Regards,
Sudhakar Rudra

Hi,
Thanks for your reply.
I hope you understood our problem.
same our system counter objects (ver x), we able to browse from Perfmon 32 bit app on Windows 7, Windows 2008 R2 (64bit) OS but not on Windows 2012.
I am able to see all counter objects registered as follows (same at HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\HMI Alarm Class\Performance,
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Services\HMI Alarm Class\Performance
and
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HMI Alarm Class\Performance)
Only difference I observed that "Disable Performance Counters" were set to 4 in Windows 2012 OS unlike other windows 7 64bit OS and there is no differnece for remaining all entires.
I tried setting that "Disable Performance Counters" value to "0", but some how they get reset to "4", no luck..
I think "Disable Performance Counters" value either "0", or "4", should not matter for browsing our counters with 32bit bit perfmon applicaiton.
Do you see any issues of registry entries. ?
On what basis perfomance monitor list few enabled counters?
How can we add our counters manually to perfomance monitor?

Error - Some objects are not available to your user profile...

Hello,
It is for BI 4.1 on Windows. We have a connection called CON1 pointing to DB1. It uses UNIV1 All reports were working fine and we were able to refresh it as well.
Now the CON1 is changed to point to DB2 and we are now getting following error - "Some objects are not available to your user profile. You cannot refresh this Query. See your Business Objects administrator to request rights".
If I create a new report using CON1 and the it works fine. Only the old reports are still causing issue on refresh. I tried with Admin account as well and same issue.
The CON1 is still CON1 and universe UNIV1 is still using CON1. Just the content was edited from DB1 to DB2 in CON1. If we create a new report then no issue.
Can anybody advice if something needs to compiled. Your help will be greatly appreciated.
Regards,
SS

Your old reports are still pointing to same connection. Remember the DSN has been pointed to use another Database. The records and entries will be different. In addition as the records or object mapping have changed for these reports. Hence this would be a very normal behaviour.
Create a new connection named CON2 or something like that to point DB1 as per your requirement. This way your original reports would work.

HT4009 I have purchased items from CityVille and they are not available in the App although my card has been charged for the purchases.

I have purchased items from CityVille and they are not available in the App although my card has been charged for the purchases. I also have an email receipt with the purchase. Can you please tell me how to resolve this issue?

iTunes Store: Hiding and unhiding purchases
http://support.apple.com/kb/HT4919

I just purchased a mac mini and wondered if it's safe to download the Kobo reader app. can I download things from the internet that are not available in the apple store?

I just purchased a mac mini and wondered if it's safe to download from the internet (such as Kobo) that are not available on the app store. It asked me if I was sure it was safe, so it's got me worried.

If you know the sites are OK, then download away.

0db* iobj are not available while installing 0sd_c03 update rules

Hi all,
i am facing this problem while installing the update rules of 0sd_c03.
the following objects are could not be collected and they are not avialable in version d.
all the objects are the nav attributes of 0sold_to
they are 0sold_to_0dbareacod
0sold_to_0dbctrycod
0sold_to_0dbctrynam
0sold_to_dbcustat
0sold_to_0dbdistrcod
0sold_to_0dbempbnd
0sold_to_0dbhqduns
0sold_to_0dblglgstat
0sold_to_0dblocacod
0sold_to_0dbregcod
0sold_to_0dbsalnd
0sold_to_0dbsectcod
0sold_to_0dbmaktcod
0sold_to_0db_mktcds
How can i fix this issue?
can anyone please throw a light on this one?
Thanks & regards,
V. Vijay

hi,
these objects are not available as a nav attr of 0sold_to ., while i am seeing in that iobj.
it is showing only the 0dbduns_num only obj as a nav attr of sold_to. the remaining iobj are not showing..
i have tried to install 0sold_to as a seperate also, but invain..
these objects are not showing...
any ideas..
Regards,
V. Vijay.

Objects are not referenced in cube data source view. Large model.

Looking at large model. 100+ measure groups, 200+ dimensions, one cube. Deployed to multiple customers in production as a part of custom developed software.
in data tools 2010 I'm looking at the cube on sql 2008, sql 2008 R2 (EE, DE).
In the cube data source diagram we observe 50+ objects that do not have any links to them or from them.
1)
Some of these I was unable to find in DMV's of the cube at all, it turns out they are present in the Data source that is in Data Source Views section.
How did these end/could end up in the cube data source model? they are not available in dimension usage window at all.
2) Others do not have any links from them or to them in cube’s data source diagram, however the dimension usage clearly shows these objects are part of relationships
both regular and many to many depending on the object in question.
We are trying to identify what objects we can ‘trim’ from the model. I’m not sure what am I looking at in this case: data tools have a trouble interpreting diagram for 200+ dimensions and
100+ measure groups (it is a large existing model) and this artifact should not be used to decide what in dimensions is obsolete and can be decommissioned.
We are looking at cube that has over 40 NxM just to one fact not counting regular relationships.
Am I looking at a feature or maybe an issue with the model itself that somehow has developed in the particular cube.
It is not something I came across before.
thanks

Hi，
According to your description, you are designing a large SQL Server Analysis Services cube, the problem is that you are unable view the relationship in the data source
view diagram, right?
In your description, you said that you can see the relationships in Dimension Usage window. In your scenario, can you see the relationship under the Tables pane when expanding
a table's Relationships folder?
General, the relationships will be defined automatic if the relationships were defined in your data source of the cube. And the dimension relationships between cube dimensions
and measure groups in the cube are defined manually in Dimension Usage. In your scenario, you can define relationship manually in the data source view, please refer to the link below to see the details.
http://technet.microsoft.com/en-us/library/ms178448.aspx
Regards,
Charlie Liao
TechNet Community Support

Crystal report for visual studio 2010 data source object is not valid error

Hello,
I receive an "data source object is not valid" error when I want to print one CR document after setting an ADODB.Recordset on SetDataSource method of my report.
On my developer station, this operation works without problem but on client station, I get this error.
The redistributable package for client is installed on client side (CRRuntime_32bit_13_0_1.msi).
Can someone help me?
Thank you.

Thank's for your answers
Dim rsPkLst As ADODB.Recordset = Nothing
Dim report As New crPickingList
' Fill ADODB.Recordset with SQL Statment
If rsPkLst.RecordCount > 0 Then
report.SetDataSource(rsPkLst) ' Error : The data source object is invalid
EndIf
This error appears during "report.SetDataSource(rsPkLst)" instruction.
ADODB drivers are already installed and my ADODB.Recordset is filled with good records.
This project is an updated project from Visual Studio 2003 to Visual studio 2010 and the old version was running fine.
Developer and client station runs under Windows XP SP3.
On developer side I install CRforVS_13_0_1 (BuildVersion=13.0.1.220.Cortez_CR4VS).
On client side I install CRRuntime_32bit_13_0_1.msi.
Both stations use Microsoft .Net Framework 4.
Move to ADO.NET is a solution but, for the moment, I do not have the time to change all applications from my company.
(I get this error from all application updated from VS 2003 to VS 2010 developed since 2005)
David.

New DSO data fields are not available for transformations in the upwardflow

Hello,
There are data flow from
many source DSOs -> Target DSO -> Final DSO.
Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
now new fields are added to the target DSO, final DSO and one of the source DSO.
When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
Have anyone faced such a problem?
any solutions to this?
- I cannot delete all the other transformations as this is too much work to do and there is no time for it.
Regards
Kannan

We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

I purchased an unlocked iPhone4 last month. Everything was fine till yesterday. Today morning when I tried to check mail, i suddenly got an error message saying " Could not activate cellular data network: you are not subscribed to a cellular data service"

I purchased an unlocked iPhone4 last month. Everything was fine till yesterday. Today morning when I tried to check mail, i suddenly got an error message saying " Could not activate cellular data network: you are not subscribed to a cellular data service", when I checked on my network settings i was not able to find the cellular data network tab ( where we use to input APN manually). i even tried to restore my iPhone to its factory settings, Still it remains the same. i cant able to connect to Internet using cellular data. help me...Plz..

Where did you purchase it from? There are lots of iPhones sold as "unlocked" which are carrier locked phones that were hacked and are not officially unlocked. These phones are subject to re-locking to the original carrier, particularly when updated.

Cannot activate cellular data network you are not subscribed to

Cannot activate cellular data network you are not subscribed to a cellular data service. Never happened until I have switched to boost. I have spoken with them for hours and they say it's fine from their end and I've reset network settings, replaced my nano sim for my iPhone 5, restored my phone played with wifi on and off airplane mode on and off I don't know what else I can do. Please help me experts!

Under "settings / general / network" is your "Cellular Data" button set to "ON"?

Datas are not available to the query when upload a Infopackage

Hello People,
I Would like to know what can be the reason ..why the datas are not available when we execute an upload from FlatFile to the Cube (this one is the last target one).
Considering tere aren´t any poroblem in may target (Cube)
The system shows us the upload was ok, but the status about the "available datas to the query" was not activated.
Thanks,
Rosana.

Hi ,
Please go to T code SE16--> Table RSDDAGGR
Here AggrUID(STARTUID) give not equal to blank, you will get list of all the cubes which has aggregates.
If your cybe is in this list , you need to rollup the data to mae this available in reporting.You can rollupp the data by going into Manage of the cube.
-Vikram

HT4623 Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s

Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s

Contact your carrier to ensure data access via their network is provisioned properly for your account and iPhone with the new iOS 6 update installed.

Applications show as up to date, but they are not current versions

I am trying to make deployable image of OSX 10.8.5.
CC desktop is telling us that applications are up to date, but they are not.
I have tried uninstalling and reinstalling the applications, only to have it go to an evem earlier version (the original CC release) and the CC desktop still says it is up to date.
I have also tried using CC Cleaner and reinstalling with the same results.
I also noticed that CC Cleaner didn't seem to completely remove all adobe files. In fact, EDGE applications and a few others still remained in the applications folder.
Can you give me any advice?

Hi bretts,
Please refer the steps mentioned in the article: http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.
Regards,
Romit Sinha

Flex SDK 3.2 : Unmarshalling issue : SOAP objects are not deserialized completely

Hi everybody !
I have a strange problem with SOAP deserialization in flex 3.2, and I thought this forum will be the best place to get answers ...
When I try to fetch some objects (like the ones shown below), the XMLDecoder does not deserialize all the properties.
In this case, it stops at the property named "rating". After it, all other data are lost.
I've used the flex builder debugger to locate the problem, and this lead me to the following method in the XMLDecoder class :
getApplicableValues(parent:*, valueElements:XMLList, name:QName,context:DecodingContext, maxOccurs:uint):XMLList:
State of the variables, before the "bug" :
The strange behavior appears after the five first properties had been deserialized correctly.
At this step : startIndex = 5, and the next property to unmarshall is "user" (according to the MExpertNotes object mapping)
the valueElement's list contains the following elements :
to simplify the notation, I will write only the position in the list and the xml tag name (see the complete soap response for more details at the end of this post)
(position, fieldName)
(0, ID) -> inherited from MotocycletteObjectImpl
(1,comment)
(2, noteValidation) (a Bean, never returned by our service -> set to null)
(3,noteValidationID)
(4,rating)
(5,timeOfCreation) -> inherited from MotocycletteObjectImpl
(6,user) (a Bean, never returned by our service -> set to null)
(7,userExpert) (a Bean, never returned by our service -> set to null)
(8,userExpertID)
(9,userID)
(10,version) -> inherited from MotocycletteObjectImpl
when it enters the for loop, at the first iteration the valueElements[i].name is equals to "timeOfCreation" and the name parameter is equal to "user".
so this test : if (name == null || valueElements[i].name() == name
|| ((name.uri == "" || name.uri == null)
&& name.localName == valueElements[i].name().localName))
returns false. The skipAhead variable is set to false (and i don't understand why). It stops iterating over the valueElementList, and so, skips all other properties.
Is this a bug ? Does a workaround exists ?
This affects many of our objects.
Any help would be greatly appreciated.
Best regards,
Jules Pajot
R&D engineer for Mikros Image
www.mikrosimage.fr
[EDIT] : My Message was too long, so I put the complete message here :
http://docs.google.com/View?docid=dd6j35ft_38grb9c7cr
PS : I apologize for my english wich is far from perfect :)
As a reminder , the XMLDecoder class method ( line 2204 ):

<div class=Section1> color:#1F497D'>The holidays are starting here. The experts in the area may already be away. Please file a bug. It might help if you can simplify your test case to use an XML file that is local so we don’t need your server connection.<o:p></o:p> color:#1F497D'><o:p> </o:p> <div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'> From:<span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> Jules Pajot [mailto:[email protected]] Sent: Tuesday, December 23, 2008 9:05 AM To: [email protected] Subject: Re: Flex SDK 3.2 : Unmarshalling issue : SOAP objects are not deserialized completely<o:p></o:p> </div> <o:p> </o:p> A new message was posted by Jules Pajot in Developers -- Flex SDK 3.2 : Unmarshalling issue : SOAP objects are not deserialized completely Nobody has an idea about my problem ? <o:p></o:p> <div class=MsoNormal> <hr size=2 width=200 style='width:150.0pt' align=left> </div> View/reply at <a href="http://www.adobeforums.com/webx?13@@.59b74f93/0">Flex SDK 3.2 : Unmarshalling issue : SOAP objects are not deserialized completely</a> Replies by email are OK. Use the <a href="http://www.adobeforums.com/webx?280@@.59b74f93!folder=.3c060fa3">unsubscribe</a> form to cancel your email subscription.<o:p></o:p> </div>

0EQUIPMENT_ATTR; DATE FROM & DATE TO objects are not available

Similar Messages

Maybe you are looking for