0Event

Hi,
I have strange issue with the data load. When i am loading text data into 0Event Infoobject the load gets loaded successfully. If i see at the PSA  table i could see the request. But if i check the same request in the manage of the 0Event i am not able to see the request. Please help me out to solve this problem.
Regards
Mansi.

Hi,
Activation or attribute change run will not make the request visible.
Are you using DTP?
If you are using the infopackage route for updation.  I will again repeat; do you use flexible update, i.e. do you have an update rule active or do you have direct update?
Only when you have flexible update, you can see the request in manage.
Are you able to see the data from the request updated in the infoobject; you can check this by lisitng data from master data maintenance.
cheers...

Similar Messages

  • Training and Event Management booking date

    Hi,
    I am working on Training and Event Management cube 0PE_C01. One of the requirements of a query is to show the booking date of the course.
    I have looked in business content for other cubes i have checked info object and 0event, i have also checked datasource 0HR_PE_1 but I can not find anywhere this information is being extracted into BW.
    Does anyone know how if this info is available or would i have to ammend the datasource to bring this info in.
    Thanks
    Forhad

    any ideas anyone.. or am i left with appending the datasource for booking date

  • Update on windows 10 preview version 10130 blue screens with f-secure as cause supplied by talktalk

    As soon as 10130 starts up blue screen critical process died the f-secure is supplied by talktalk version  Super Safe Boost 2.21 build 285CCF CUIF 10.03 build 258
    CCF DAAS2 1.10 build 369
    CCF Guts2 2.01 build 418
    CCF Upstream 2.01 build 980
    CCF Diagnostics 8.01 build 924
    CCF Scanning 1.51 build 112.309
    CCF Network 1.03 build 102
    CCF Reputation 2.0 build 1337 as soon as install is about to complete Blue Screen critical-process-died But as windows 10 no longer has F8 to enter safe mode and unable to do msconfig either it would leave a novice user with useless Computer. PS i had re-enabled F8 option so was able to do restore back having taken a checkpoint before adding the anti-virus also it left the pc in a mess and i had to do a chkdsk /F to recover the pc correctly as windows 10 was just like safe mode with no apps apart fromt event viewer and Run so able to do CMD.EXE and recover the situation i even re-installed the latest 10130 iso to guarantee a clean situation and again as soon as f-secure is installed it blue screens and can not be uninstalled as instalaion shows installed but as had nor completed will only remove icon  all previous releases worked as i was testing office 2003, photoshop etc as wanted to ensure migration from windows 7 to 10 would be uneventfull running in dual boot mode ------------------------------- how can i debug this problem . event viewer shows 3 errors------------------------------------------------------------------------Fault bucket , type 0Event Name: WindowsUpdateFailure3Response: Not availableCab Id: 0Problem signature:P1: 10.0.10074.0P2: 800b0101P3: F4932C69-501D-49CA-B507-0DF0531CB356P4: DownloadP5: 202P6: 0P7: 0P8: Dynamic UpdateP9: {7971F918-A847-4430-9279-4A52D1EFE18D}P10: 0Attached files:These files may be available here:　Analysis symbol:Rechecking for solution: 0Report ID: 3a290198-0a02-11e5-ab6f-0016448c363fReport Status: 262144Hashed bucket:------------------------------------------------------------------------------  Fault bucket , type 0Event Name: WindowsUpdateFailure3Response: Not availableCab Id: 0Problem signature:P1: 10.0.10074.0P2: 800b0101P3: F4932C69-501D-49CA-B507-0DF0531CB356P4: DownloadP5: 202P6: 0P7: 0P8: Dynamic UpdateP9: {7971F918-A847-4430-9279-4A52D1EFE18D}P10: 0Attached files:C:\WINDOWS\Temp\WER15AB.tmp.WERInternalMetadata.xmlThese files may be available here:C:\ProgramData\Microsoft\Windows\WER\ReportQueue\NonCritical_10.0.10074.0_514ab7a9a8ce992752eb54e1dd1412dafd33beb5_00000000_cab_110415cbAnalysis symbol:Rechecking for solution: 0Report ID: 3a290198-0a02-11e5-ab6f-0016448c363fReport Status: 4Hashed bucket:------------------------------------------------------------------------------------- Fault bucket 91736524612, type 5Event Name: WindowsUpdateFailure3Response: Not availableCab Id: 0Problem signature:P1: 10.0.10074.0P2: 800b0101P3: F4932C69-501D-49CA-B507-0DF0531CB356P4: DownloadP5: 202P6: 0P7: 0P8: Dynamic UpdateP9: {7971F918-A847-4430-9279-4A52D1EFE18D}P10: 0Attached files:C:\WINDOWS\Temp\WER15AB.tmp.WERInternalMetadata.xmlThese files may be available here:C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_10.0.10074.0_514ab7a9a8ce992752eb54e1dd1412dafd33beb5_00000000_111c1bb6Analysis symbol:Rechecking for solution: 0Report ID: 3a290198-0a02-11e5-ab6f-0016448c363fReport Status: 0Hashed bucket: e0ac3ecdf8185ff6d24e9c67904da683   maybe the version supplied to talktalk has a flaw which you have fixed and talktalk need a new version 

    Hi 
    Currently all versions of F-Secure Internet Security / SAFE will bluescreen with Windows 10 starting from Windows 10 build 10130. Only the beta version of F-Secure SAFE ("fs protection") is compatible.
    We know what is causing the problem and are working on maintenance releases. The products will be updated before Windows 10 launches.
    Ville
    (F-Secure R&D)
     

  • Function module expression for dynamic value for Cost center in BRF

    Hello Experts,
    We are in SRM 7.0 and our business object is shopping cart using BRF.
    Right now we have Cost Center Approver and its evaluation id ()zev_sc_**_*) has expression zc_sc_*_** that checks whether overallvalue >= 5000. It initiates cost center approver only if value is greater than or equal to 5000. But this is static expression. We want it in a dynamic way so that we don't have to modify this value frequently. Therefore we have set approach to use an expression of Function Module BAdI as expression. We have a new z table which contains value field zval. Now I want to know how or what should be the process so that this FM knows the corresponding value from a z table that user might select in the SC.How it should be linked to this. I am using /SAPSRM/WF_BRF_0EXP000 function module. Please advise where should the code be written ? Any method ? And what should be the exporting and importing parameters for this ?
    Right now I can see EV_VALUE, EV_TYPE, EV_CURRENCY etc as exporting paramters. Looking for your suggestions experts.
    Thank you.
    Best regards.

    Dear abhijeet,
    just follow the steps.
    i) I believe you have created the event as Zev_***  with implememt Class     0EVENT.
    ii) copy the std fm /SAPSRM/WF_BRF_0EXP000 to z custom fm
    iii)  since you want to have an  expression as function module procurement type create expression  with                                                                               
    expression type  0CF001
                                                                                    result type B ( boolean)
                                                                                    Buffering as event-controlled buffering
    and very important procurement type as function module.
    iv) immediatly you may find written as AccessFM where pass your custom z function module.
    v) finally link this expression to your event.
    In the custom function module  the exporting parameter EV_VALUE is solely responsible for identifieng the approval based upon the approval criteria. If the field EV_VALUE = 'X' this notify that the approval is required  for current process level, otherwise if it is initial then it will skip the current level and continue with the next level.
    whatever your coding should be written in FM.
    just look into below code
      DATA LO_WF_BRF_EVENT       TYPE REF TO /SAPSRM/CL_WF_BRF_EVENT.
      DATA LO_CONTEXT_PROVIDER   TYPE REF TO /SAPSRM/IF_WF_CONTEXT_PROVIDER.
      DATA: LV_HEADER LIKE BBP_PDS_SC_HEADER_D.
      DATA: LT_ITEM TYPE STANDARD TABLE OF BBP_PDS_SC_ITEM_D.
      LO_WF_BRF_EVENT ?= IO_EVENT.
      LO_CONTEXT_PROVIDER = LO_WF_BRF_EVENT->GET_CONTEXT_PROVIDER( ).
      CALL METHOD LO_CONTEXT_PROVIDER->GET_DOCUMENT
        IMPORTING
          EV_DOCUMENT_GUID = LV_DOCUMENT_GUID
          EV_DOCUMENT_TYPE = LV_DOCUMENT_TYPE.
    pass this guid in the below function module in order to get the SC details.
    GET SC DETAILS
      CALL FUNCTION 'BBP_PD_SC_GETDETAIL'
        EXPORTING
          I_GUID    = LV_DOCUMENT_GUID
        IMPORTING
          E_HEADER  = LV_HEADER
        TABLES
          E_ITEM    = LT_ITEM
    After that loop the internal  table LT__ITEM   and you decide based upon your approval criteria for each line item level wheather the gross price of  line item is exceed 5000k or not.
    you should decide the value for field EV_VALUE within the loop so that each line item will be verified for approval.
    Pls contribute if this helpfull.
    regards
    sahil purushan

  • BW 0HR_PA_2 - 3 Update rules assignment for 0PA_DS02 - 3

    Hello experts
    I am just another one tryng to figure out how to assign the update rulesfor DSO's  0PA_DS02 and 3. The business content activation of the update rules yields a no update type of rule. So I guess we need to assign the fields manually. I read the <How-to> document on the BW/HR authorization but I am still trying to pass <GO> and load the initial data as the document does not mention the update rules assignment. In that regards I searched SDN on how to modify the update rules but I can't seem to pin point the exact complete information.
    Please help.
    Thanks.
    YB.

    =========================
    Update Rules for 0PA_DS03 (Part 2)
    =========================
    0TCTNDEF  -  BW Reporting Authorizations: Node Variables Defaul
    Initial value
    0TCTNIOBJNM - InfoObject of Node
    Routine:
    PROGRAM UPDATE_ROUTINE.
    $$ begin of global - insert your declaration only below this line  -
    TABLES: ...
    DATA:   ...
    $$ end of global - insert your declaration only before this line   -
    FORM compute_key_field
      TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
      USING    COMM_STRUCTURE LIKE /BIC/CS0HR_PA_3
               RECORD_NO LIKE SY-TABIX
               RECORD_ALL LIKE SY-TABIX
               SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
      CHANGING RESULT LIKE /BI0/APA_DS0300-TCTNIOBJNM
               RETURNCODE LIKE SY-SUBRC
               ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
    $$ begin of routine - insert your code only below this line        -
    fill the internal table "MONITOR", to make monitor entries
      RETURNCODE = 0.
    result value of the routine
      IF COMM_STRUCTURE-hr_otyobj IS INITIAL.
        RESULT = '1NODENAME'.
      ELSE.
        CASE COMM_STRUCTURE-hr_objtype.
          WHEN 'O'.   RESULT = '0ORGUNIT'.
          WHEN 'C'.   RESULT = '0JOB'.
          WHEN 'S'.   RESULT = '0HRPOSITION'.
          WHEN 'P'.   RESULT = '0EMPLOYEE'.
          WHEN 'Q'.   RESULT = '0QUALIFICTN'.
          WHEN 'QK'.  RESULT = '0QUALIGROUP'.
          WHEN 'BA'.  RESULT = '0APPRAISAL'.
          WHEN 'A'.   RESULT = '0HRWORKCNTR'.
          WHEN 'BK'.  RESULT = '0AP_CRIT'.
          WHEN 'BS'.  RESULT = '0AP_SCHEME'.
          WHEN 'E'.   RESULT = '0EVENT'.
          WHEN 'D'.   RESULT = '0EVENTTYPE'.
          WHEN 'L'.   RESULT = '0EVENTGROUP'.
          WHEN 'F'.   RESULT = '0EVLOCATION'.
          WHEN 'G'.   RESULT = '0RESOU'.
          WHEN 'R'.   RESULT = '0RESTYPE'.
          WHEN 'H'.   RESULT = '0EXTPERS'.
          WHEN 'U'.   RESULT = '0EXTORG'.
          WHEN OTHERS.RETURNCODE = 4.
        ENDCASE.
      ENDIF.
    if the returncode is not equal zero, the result will not be updated
    if abort is not equal zero, the update process will be canceled
      ABORT = 0.
    $$ end of routine - insert your code only before this line         -
    ENDFORM.
    0TCTNODE    - Nodes of a Hierarchy
    Routine:
    PROGRAM UPDATE_ROUTINE.
    $$ begin of global - insert your declaration only below this line  -
    TABLES: ...
    DATA:   ...
    $$ end of global - insert your declaration only before this line   -
    FORM compute_key_field
      TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
      USING    COMM_STRUCTURE LIKE /BIC/CS0HR_PA_3
               RECORD_NO LIKE SY-TABIX
               RECORD_ALL LIKE SY-TABIX
               SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
      CHANGING RESULT LIKE /BI0/APA_DS0300-TCTNODE
               RETURNCODE LIKE SY-SUBRC
               ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
    $$ begin of routine - insert your code only below this line        -
    fill the internal table "MONITOR", to make monitor entries
    result value of the routine
      IF COMM_STRUCTURE-hr_otyobj IS INITIAL.
        RESULT = 'ROOT_H'.
      ELSE.
        RESULT = COMM_STRUCTURE-hr_otyobj.
      ENDIF.
    if the returncode is not equal zero, the result will not be updated
      RETURNCODE = 0.
    if abort is not equal zero, the update process will be canceled
      ABORT = 0.
    $$ end of routine - insert your code only before this line         -
    ENDFORM.
    0TCTOBJVERS- Object Version
    Constant: A
    0TCTSYSID  - BW System
    Routine:
    PROGRAM UPDATE_ROUTINE.
    $$ begin of global - insert your declaration only below this line  -
    TABLES: ...
    DATA:   ...
    $$ end of global - insert your declaration only before this line   -
    FORM compute_key_field
      TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
      USING    COMM_STRUCTURE LIKE /BIC/CS0HR_PA_3
               RECORD_NO LIKE SY-TABIX
               RECORD_ALL LIKE SY-TABIX
               SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
      CHANGING RESULT LIKE /BI0/APA_DS0300-TCTSYSID
               RETURNCODE LIKE SY-SUBRC
               ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
    $$ begin of routine - insert your code only below this line        -
    fill the internal table "MONITOR", to make monitor entries
    result value of the routine
      CALL METHOD cl_rso_repository=>get_logical_system_self
        RECEIVING
          r_logsys = RESULT.
    if the returncode is not equal zero, the result will not be updated
      RETURNCODE = 0.
    if abort is not equal zero, the update process will be canceled
      ABORT = 0.
    $$ end of routine - insert your code only before this line         -
    ENDFORM.

  • HR course schedule

    Hi,
    I have a report that displays LSO course info. Part of it shows the Course Type Schedule text. I get this from the HRP1042-AMUST field. This is fine.
    The problem I have is that sometimes when they create a course based on the Course Type, they change the schedule type. This then creates a schedule based on the newly selected schedule. I can find the schedule information in HRV1035A but not the schedule type used.
    e.g.
    Course Type: CP1 has a default of a 1 day scehdule (Schedule Type name 'ONEDAY')
    Course created, based on CP1, but a 5-day schedule is selected (Schedule Type name 'FIVEDAY')
    The table HRV1035A has five entries, but there is no mention of the schedule type used ('FIVEDAY').
    Can anyone tell me where this field is stored (if at all)?
    Thanks.

    0EVENT_HR02_HIER
    0EVENT_ATTR
    Check table roosource for  0EVENT*
    0EVENT_TEXT
    0EVENT_HR02_HIER
    0EVENTEXT_TEXT
    0EVENT_ATTR
    0EVENTTYPE_TEXT
    0EVENTGROUP_HR02_HIER
    0EVENTTYPE_HR02_HIER
    0EVENTSTAT_TEXT
    0EVENTGROUP_TEXT
    regards,
    Colin

  • Need some more EEM help

    Here's what I'm trying to accomplish:
    When both g0/1/0 AND g0/1/1 go down, shut down p0/0/0.
    When either g0/1/0 OR g0/1/1 comes back up, wait 5 mins and if either is still up, bring up p0/0/0.
    While waiting, if the link that is up goes down, reset the countdown timer.
    Previously Joe Marcus Clarke helped solve a similar scenario (see attached) but this takes it a little further. I want to modify that script to accomodate this new scenario.
    Would appreciate any assistance.

    This one Tcl policy replaces your two existing applet policies.  Before you can register it, though, you need to set a few EEM environment variables:
    # pc_intf      : Name of the port channel interface to control.
    # pc_member_1  : Name of first interface to watch.
    # pc_member_2  : Name of second interface to watch.
    # pc_up_timer  : Value in seconds to wait before the port channel is brought
    #                back up when a member interface comes back up.
    For example:
    event manager environment pc_intf P0/0/0event manager environment pc_member_1 GigabitEthernet0/1/0event manager environment pc_member_2 GigabitEthernet0/1/1event manager environment pc_up_timer 300
    Then you can register the EEM Tcl policy.

  • Bing Bar 7.0 (KB2626804) Keeps trying to install itself on my HP and Fails.

    Hello, I have upgraded my system to Windows 10 Pro, and ever since it has been trying to install the Bing Bar 7.0 and failing. I dont need it. Dont have it. Didnt have it on my Windows 7 Pro. So I have no idea why it is trying to install it on my system. I have looked everywhere on my computer, and it is not in the programs to be installed. I have even looked in all of my browsers, to make sure that it wasn't hidden in any of those. It isnt. So I did a DxDiag on my system to see what it had to say, and when it uploads and fails, the Diagnosis says: +++ WER2 +++:
    Fault bucket , type 0Event Name: WindowsUpdateFailure3Response: Not availableCab Id: 0 Problem signature:P1: 10.0.10240.16397P2: 80246013P3: F7C086A0-F7E8-486A-9167-9A09707BF1ECP4: InstallP5: 101P6: 0P7: 80246013P8: UpdateOrchestratorP9: {7971F918-A847-4430-9279-4A52D1EFE18D}P10: 0 So I have no idea what to do. This Bing Bar will keep trying to install itself over and over and over, and fail; and I wont be able to stop it. Does anyone have any idea what I can do? Tim  

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how a recent Windows update keeps trying to install itself on your desktop computer and fails, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on How to block automatic reinstall of a driver or update from Windows Update. This should help prevent the updating of KB2626804 on your system. Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards

Maybe you are looking for