0fi_ar_4 netduedate(netdt) value coming in RSA3 but not coming in BI PSA
Hi all,
i am using 0fi_ar_4,
netduedate(netdt) value coming in RSA3 but not coming in BI PSA, in BI PSA there is 10-12 do cument there where netduedate is null while for same document we are getting the netduedate running from transaction RSA3, how?
Thanks.
Hi,
I found the problem, i have write a user exit in data sourc e in ecc, i am getting value in rsa3 but not getting in BI PSA becaue ise there is 20000 KB limits for per info package load request i.e. idoc size, as its fixed, i did change little in my user exit at ECC.
thaks
Similar Messages
-
IO assigned with Asset,but not coming at the time of PO creation
Hello
IO assigned with Asset,but not coming at the time of PO creation.
I have made following settings:
1 Depreciation - IFRS (INR) 1 0L
15 Income Tax Act 0
20 Depreciation - Indian GAAP (INR) 3 1L
30 Depreciation - IFRS (USD) 0
31 Depreciation - Indian GAAP (USD) 0
In ACSET-Account assignment:
for dep area-20
CAUFN Internal Order * Generic Trans. Type 02 Depreciation Run
KOSTL Cost Center * Generic Trans. Type 02 Depreciation Run
so currently i am using only dep area-20 only(Indian GAAP)
CAPEX budgeting is through IO. AUC is not doing through IO,its directly from AIAB/AIBU
AS01
KO01
AS02
KO22
KO30
so what is the problem,why i am not getting IO (which is in display mode in PO) when assigned the Asset with category of "A" (asset) in PO.......when i assigned Asset- the GL account come automatically but IO didn't come.
kind regardsHey Ajay
thanks for your reply.....
now i'm getting new error:
Parallel depreciation area 31 is not posted
Message no. AA565
Diagnosis
The asset to be posted does not manage parallel depreciation area 31, or
transaction type that you are using is limited to certain depreciation
areas, and does not contain depreciation area 31. This is incorrect.
System Response
Posting is rejected.
Procedure
Check the asset and the transaction type.
I have checked some configuration but not able to debug it.
regards -
Stack the values in a series but not stack by series
Anyone have the idea on this:
stack the values in a series but not stack by series.
There is only 1 series in the chart and I want to stack all the values returned. No way to do this in apex?hi all,
can apex support this chart? thanks.
http://www.anychart.com/products/anychart/gallery/sample_97.html -
I downloaded a movie from itunes and it finished but not coming up in movie folder what do i do??
it should be under (using Finder):
[user folder] > Music > iTunes > iTunes Music > Movies -
Works in RSA3 but not when pulling from BI
Hi,
I created a generic dataSource(Function Module) for Bill Of Material. When testing in RSA3 it is working fine. But when pulling data from BI with particular material in the Data Selection, it is saying "No data available". If I am pulling the same with no data selection then it is giving an error message "Job terminated in source system --> Request set to red".
When checked in SM37 I see the following error messages.
No active nametab exists for /SAPAPO/MATKEY DA 300
Job cancelled after system exception ERROR_MESSAGE
Can any body help me on this
Thanks for your help
SubraEvery thing is fine in all these transactions SM58, BD87, & WE05. There is no problem with the connections at all. I replicated many times and the error is always the same.
The error message below is the reason.
No active nametab exists for /SAPAPO/MATKEY
This messsage is not coming when testing in RSA3. Only when pulling the data from BI, this error is happening.
We are not using SAPAPO but still this message is coming up.
thanks
Subra -
Accounting Doc is created and it is in RSA3, but not loaded into BW side ?
Hi all,
One Accounting Document (of Credit Memo type) has been created with Tcode VF01 and this document exists in Extractor Checker (RSA3) and BSEG & BKPF tables and it has the corresponding Billing Document (VBELN) details in those tables. The Document with VA03 the Status for Sales Doc & Billing Doc is Cleared, but for the Accounting Doc is 'Not Cleared'. We have loaded the delta with 0FI_GL_4 Extractor in to an ODS, but this record is not coming into BW. Why it is missing ? Is it sitting somewhere and waiting for some other process, PLEASE ???
Thanks in advance.
Regards,
Venkat.Hi Sam,
There are no Selections in the InfoPackage.
As you said, as default this extractor pulls records a day old. This record was created yesterday and it should be available today in RSA7, isn't it? But, it is NOT in RSA7. I thought that if it is in RSA7 then I could load the Delta again to get the records that were created yesterday. Does it require any other process to move them into RSA7, PLEASE?
Thanks,
Venkat. -
Value of codition type is not coming
Dear All,
In sales order creation if i am putting discount condition type manually it is not coming.actually base value showing is zero so because of this value is showing zero.i checked in pricing procedure in FROM column for this discount condition type steps number is there.Some other controls are there in ECC 6.0.
Regards
Ajitactually i am creating credit notes for customer with reference to invoice no. In copying control i did not maintain pricing type D so that system could not copy same pricing. I maintaining manually in sales order & applying ZCR1 condition type(discount).its calculating on base value but in condition base value value coming zero.so i am putting this condition 23% discount its calculating on base value that is zero.
hopefully you will understand.
Regards
Ajit -
CHAR's value in the query but not in the report??
Hi all,
I loaded master data and crm transaction data from ODS to Cube. The data is in the cube but there is no value in my report when running it. EX: there are some CHARs in my report, I checked those CHARs have value in the query but it shows 'not assign' in my report when I run it. What happen?
Thanks.
J.Please see below text and also the sent link..
If a navigation attribute is used in an aggregate, this aggregate has to be adjusted using a change run as soon as new values are loaded for the navigation attribute (when master data for the characteristic belonging to the navigation attribute is loaded.) This change run is usually one of the processes that are critical to the system performance of a production BW system. This is why, by avoiding using navigation attributes or not using navigation attributes in aggregates, you can improve the performance of this process. On the other hand, not using navigation attributes in aggregates can lead to poor query response times. The data modeler needs to find the right balance.
http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
cheers,
Vishvesh -
Hello,
I inserted a new DVD in my mac book pro, its working and the drive is reading the dvd but unfortunately is not coming out. I have tried several ways mentioned on all over the net and apple community websites but nothing has worked so far.
I need a easier and manual way to eject the DVD. Where is apple's help?
Please help me. This is one of the weaknesses Apple should work on because it is causing us pain and loss of efficiency which is not apple's quality.
ThanksThanks for asking, actually I just found a trick on a website.
It siad that restart MBP while holding eject button, I did it and DVD came out right away.
I hope that this works out for everyone.
But still there is a need for a manual eject system so that people don't worry about stucking the DVD or CD in th drive.
Thanks anyway dear. -
IDOC in 03 staus but not coming to PI system..
Hi Experts,
I am working on IDOC to IDOC scenario.All of the IDOCs are in 03 status in R/3 system but some of the IDOCs are not coming to PI system.I checked SM58 also but its fine.
Should it be in 12 staus?
Is it possible that IDOC in status 03 can reach to the target system?
Please reply it asap.Its urgent.
Regards,
VikramHi Vikram,
First of all, bd75 is only for status conversion. This means, that only IDoc statuses are changed, based on the status of the RFC call. IDocs are not despatched again by this transaction.
Secondly, you might want to check the EDI Port that is assigned in the partner profile, if it is pointing to the correct target system.
Finally, if target system is OK and you don't find anything in sm58 in sender system, then you should go to smq2 in PI and you should find your IDocs there, waiting in a blocked queue.
Hope this helps,
Greg -
Graph is coming when running thru desktop but not coming thru PIA
HI all,
I have an issue. I have created a XMLP template which generates a Chart.
When i run the report in desktop, chart is coming .
but when i run through peoplesoft PIA chart is not coming.
Kindly please suggest me how can i see the chart.
Many thanks in advance.
Regards,
Dhaya.Go to www.blackberry.com/blackberrylink for the latest version.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
Data available in RRP3 view but not coming in SNP planning book
Hi All,
I am facing an issue in SNP book. I can see forecasts in RRP3 view. But when I load the same data in SNP planning book, the forecasts are not coming there (forecast KF)
I ran LC Cons check, PA cons check, OM17, but still the same result.
Any pointer would be highly valuable.
Regards,
Manotosh BhattacharyaHi
If you look at the standard Forecast KF 9ADFCST in your planning area, it is usually assigned the Category Group of DF1. This category group only contains the category FA for forecast. If you create Forecast in /SAPAPO/RRP3, this will create Additional Forecast or category group FC. Therefore any forecast generated this way will not appear against the standard planning book KF.
So you have two choices, if your forecast is only FC category then use the KF 9AAFCST Forecast (Addittional) in your data view or create a new Category Group with both FA and FC assigned to it and then assign this Categotry Group to 9ADFCST in your planning area.
Regards
Ian -
For quite a while now I have missed some important emails that have come through to my iphone but not downloaded to my iMac, its happening more and more recently. It is really fustrating, I have looked at my iMac and can't find anywhere to adjust the settings to let through the missing emails, the emails that are not coming to my home pc are normaly from large companies, some from my credit card company and comformation for hotel bookings etc, etc.
Can anyone help me please?Problem might me with how your e.mail is set up if you're using POP3.
If you're using POP3 then you need to add "recent:" (without the quotation marks) before your username on both your iMac and your iPhone.
I use POP3 with Virgin Media and they have well documented help on this aspect.
This now works fine for me and I no longer miss any e.mails. -
HT201209 reedemed code on iphone but not coming through on ipad
I have reedeemed itunes card on my iphone but it is not coming through on my ipad, which is same apple id it usually does.
Apple has a pretty comprehensive trouble shooting guide in Mail Setup, Troubleshooting etc..
-
I am receiving texts from my son's iPhone on my iPad but not on my iPhone. Can I receive the same message on both my iPad and iPhone?
Found a fix on another thread that seemed to work.
Go into Messages preferences and uncheck "enable this account." Wait a few seconds, then recheck it.
Also disabled and re-enabled imessages on my 4S just for good measure.
Hope this helps
Maybe you are looking for
-
I have dowloaded both 3.6 and 4.1 exe, however, I still get the urgent mesg from firefox. My download file shows that the downloads took place, but I guess they never were completely installed. How can I check to make sure the downloads are installed
-
Sadly, after 7 years loyal service my powerbook fell on the floor and the right hand hinge snapped. Now all I get on start up is a quick flicker and black screen but an external screen fires up fine - except it doesn't show the login screen but an em
-
EXIF, UserComment and UNICODE. Format???
I am trying to write the image description into the EXIF UserComment tag as UNICODE. Unfortunately, in the TIFF6 and EXIF file format description, there is no specification for the format to use for the UNICODE characters. Is it 2-byte LE, 2-byte BE,
-
Documents on Enterprise Search
Hi, I wish to know about SAP Netweaver Enterprise Search. So if anybody have documents (pdfs, text files,ppts etc.) , SAP Notes and links regarding that please provide here. Send the documents to the following mail id. [email protected] /* respo
-
Can a calendar from iphoto be printed anywhere?
Can a calendar from iphoto be printed in another region than where the account is set up? I am in Switzerland and would like to get my calendar to the States for Christmas. There must be a way to print it in the States and have it delivered directly.