0FI_GL_4 failing due to enhancement for 0FI_AR_4

Hi Gurus,
I have enhanced the 0FI_AR_4 datasource with additional fields.  Create my function module and assigned it to 00005021 in table TPS31.  This works great for the AR extraction.  But now the GL extraction is failing on this function module.   This is the error message during the execution of extractor for 0FI_GL_4 ==>  'The data object "C_STRUCTURE" has no structure and therefore no component called "VBELN"..    Why would the 0FI_GL_4 extractor call the function module exit for the 0FI_AR_4?   Any help you can provide will be greatly appreciated. 
Thank you in advance!!
Andy

hi
0FI_GL_4 & 0FI_AR_4 are linked to gather.. hence when u enhance, u need to take care of this..
read below SAP Note:
410799

Similar Messages

  • Fdpstp failed due to ora-12899 value too large for column

    Hi All,
    User facing this problem while running the concurrent program.
    the program is complted but with rhis error.
    fdpstp failed due to ora-12899 value too large for column
    Can any one tell me the excat solution for this?
    RDBMS : 10.2.0.3.0
    Oracle Applications : 11.5.10.2

    User facing this problem while running the concurrent program.
    the program is complted but with rhis error.Is this a seeded or custom concurrent program?
    fdpstp failed due to ora-12899 value too large for column
    Can any one tell me the excat solution for this?Was this working before? If yes, any changes been done recently?
    Can other users run the same concurrent program with no issues?
    Please post the contents of the concurrent request log file here.
    Please ask your developer to open the file using Reports Builder and compile the report and run it (if possible) with the same parameters.
    OERR: ORA-12899 value too large for column %s (actual: %s, maximum: %s) [ID 287754.1]
    Thanks,
    Hussein

  • AD 11g Trusted Recon is failing due to invalid Date format for Start Date

    We are using OIM 11g with AD 11g connector.
    we have mapped "whenCreated" attribute of AD to "Start Date" in OIM. We ran Trusted Recon, the recon failed due to invalid date format.
    we got the following error :
    Caused By: oracle.iam.reconciliation.exception.InvalidDataFormatException: Invalid data - 10/19/2012 10:33:30 AM against Date format yyyy/MM/dd HH:mm:ss z for key Start Date
    at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.convertReconFieldsToOIMFields(ReconOperationsServiceImpl.java:1610)
    at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.ignoreEvent(ReconOperationsServiceImpl.java:548)
    at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.ignoreEvent(ReconOperationsServiceImpl.java:535)
    at sun.reflect.GeneratedMethodAccessor9326.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    Thanks.

    Caused By: oracle.iam.reconciliation.exception.InvalidDataFormatException: Invalid data - *10/19/2012 10:33:30 AM* against Date format yyyy/MM/dd HH:mm:ss z for key Start Date
    Error is because of invalid date format.
    You need to bring data in required format. As I remember you can configured it in one of the AD configuration lookup.

  • FDPSTP failed due to ORA-20100: File o0035807.tmp creation for FND_FILE fai

    Cause: FDPSTP failed due to ORA-20100: File o0035807.tmp creation for FND_FILE failed.
    You will find more information on the cause of the error in request log.
    ORA-06512: at "APPS.FND_FILE", line 410
    ORA-06512: at
    $ echo $APPLPTMP
    /usr/tmp/DEV
    $ echo $APPLTMP
    /prod2/devcomn/temp
    SQL> show parameter utl_file_dir;
    NAME TYPE VALUE
    utl_file_dir string /usr/tmp, /usr/tmp/DEV, /prod2
    /devcomn/temp, /prod2/devcomn/
    temp/DEV, /homeoa/interf/DEV,
    /homeoa/interf/PROD, /homeoa/i
    nterf/DEV/OP, /homeoa/proaut2/
    DEV/OP, /homeoa/proaut2/DEV, /
    homeoa/proaut2/DEV/CO, /homeoa
    /proaut2/DEV/PT
    I applied some notesm, about the utl, and APPLPTMP. But the error persist, Can you help me?
    Regards,
    Guido

    Cause: FDPSTP failed due to ORA-20100: File o0035807.tmp creation for FND_FILE failed.
    You will find more information on the cause of the error in request log.
    ORA-06512: at "APPS.FND_FILE", line 410
    ORA-06512: at
    $ echo $APPLPTMP
    /usr/tmp/DEV
    $ echo $APPLTMP
    /prod2/devcomn/temp
    SQL> show parameter utl_file_dir;
    NAME TYPE VALUE
    utl_file_dir string /usr/tmp, /usr/tmp/DEV, /prod2
    /devcomn/temp, /prod2/devcomn/
    temp/DEV, /homeoa/interf/DEV,
    /homeoa/interf/PROD, /homeoa/i
    nterf/DEV/OP, /homeoa/proaut2/
    DEV/OP, /homeoa/proaut2/DEV, /
    homeoa/proaut2/DEV/CO, /homeoa
    /proaut2/DEV/PT
    I applied some notesm, about the utl, and APPLPTMP. But the error persist, Can you help me?https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-20100+AND+FND_FILE+&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-20100+AND+ORA-06512&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • FDPSTP failed due to ORA-20100: File 1111.tmp creation for FND_FILE failed.

    Dear,
    Cause: FDPSTP failed due to ORA-20100: File l0187052.tmp creation for FND_FILE failed.
    You will find more information on the cause of the error in request log.
    ORA-06512: at "APPS.FND_FILE", line 543
    ORA-06512: at "APPS.HRI_
    We are facing the problem while running standard request. Could you pls advice,
    Thansk.

    user-Keen wrote:
    Dear,
    Cause: FDPSTP failed due to ORA-20100: File l0187052.tmp creation for FND_FILE failed.
    You will find more information on the cause of the error in request log.
    ORA-06512: at "APPS.FND_FILE", line 543
    ORA-06512: at "APPS.HRI_
    We are facing the problem while running standard request. Could you pls advice,
    Thansk.
    You may also see previous threads which discuss the same topic -- https://forums.oracle.com/search.jspa?peopleEnabled=true&userID=&containerType=&container=&q=ORA-20100+APPS.FND_FILE
    Thanks,
    Hussein

  • My daughter has not used her ipod touch for 16 months and has forgotten her passcode.  restore factory settings keeps failing due to a software update failure!

    my daughter has not used her ipod touch for 16 months and has forgotten her passcode.  restore factory settings keeps failing due to a software update failure!
    how can i get this ipod reset.  She now has an iphone so this is going to be used by someone else in the family and should be simple to do but itunes just keeps booting it out even though it recognises that it was previously connected to our itunes account as all of the children were on my account

    That has nothing to do with an update server. Do the following:
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
      If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes

  • App failed due to java.sql.SQLException: [Microsoft][ODBC driver for Oracl

    Hello I developed a small applicaion for insert data into database.but i am getting exception in the server like this.
    app failed due to java.sql.SQLException: [Microsoft][ODBC driver for Oracle][Oracle]ORA-01401: inserted value too large for column
    And the code is given below..
    import java.io.*;
    import java.sql.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    public class Jdbc1 extends HttpServlet
    public void service(HttpServletRequest request,HttpServletResponse response)throws ServletException,IOException
    PrintWriter out=response.getWriter();
    String no=request.getParameter("no");
    String name=request.getParameter("name");
    String age=request.getParameter("age");
    try
    System.out.println("1");
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    System.out.println("2");
    Connection con=DriverManager.getConnection("jdbc:odbc:rakesh","scott","tiger");
    System.out.println("3");
    Statement st=con.createStatement();
    System.out.println("4");
    st.executeUpdate("INSERT INTO ind VALUES('+no+','+name+','+age+')" );
    con.commit();
    con.close();
    catch(Exception e)
    System.out.println(" app failed due to "+e);
    }Please give solution for this....

    Hello sir..
    thanks for ur reply...
    for oracle 10g -----> we use XE as datasourse
    name..What?
    now i am using oracle 8i...Not so from the code you posted. Didn't I see "jdbc:odbc:..." in your first post?
    so what should i
    write...in the datasourse name...that means.......
    Connection
    con=DriverManager.getConnection("jdbc:oracle:thin:@loc
    alhost:1521:????????","scott","tiger");Do you really use the default username and password?
    What should i write in place of ?????????..The name of the database you wish to connect to, of course.
    Do you have your tnsnames.ora set up properly? Did you install this database?
    None of this has ANYTHING to do with the error you posted, of course. Fix that first and then worry about the thin driver. At least it appears that the code you posted managed to connect to the database.
    %

  • SCOM not generating alerts & The request to synchronize state for OpsMgr Health Service identified by "bdb1712b-0a9a-bbe3-9630-41f2da9f64a1" failed due to the following exception "System.Data.SqlClient.SqlException: Cannot open database "OperationsManager

    Hi Anyone can assisting on this. The SCOM 2007r2 i managed suddenly do not pump out alerts.
    I have perform full scom service restart(data access, agent, config). it no load up related datawarehouse like(stored, write)
    I also restarted my sql db services. It show me the error like this. Anyhow i can fix it
    The request to synchronize state for OpsMgr Health Service identified by "bdb1712b-0a9a-bbe3-9630-41f2da9f64a1" failed due to the following exception "System.Data.SqlClient.SqlException: Cannot open database "OperationsManager" requested
    by the login. The login failed.
    Login failed for user 'HK\svc-scomsdk'.
       at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
       at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
       at System.Data.SqlClient.SqlConnection.Open()
       at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
       at System.Data.SqlClient.SqlConnection.Open()
       at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
       at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
       at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
       at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
       at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
       at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
       at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
       at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
       at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
       at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
       at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
       at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
       at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
       at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
       at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
       at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)
       at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)".

    Hi,
    I would like to suggest you reset the SDK account password (in this case, it seems like that the account is 'scomsdk'). And change the password for the account in service configuration.
    Please go through the below article for details:
    How to change the credentials for the SDK Service and for the Config Service in Microsoft System Center Operations Manager
    http://support.microsoft.com/kb/936220/en-us
    Regards,
    Yan Li
    Regards, Yan Li

  • Retrieving the COM class factory for component with CLSID {01732742-D1A2-11D7-99EB-505054503030} failed due to the following error: 80040154.

    An unhandled exception occurred and the process was terminated.
    Application ID: /LM/W3SVC/1/ROOT/OPA
    Process ID: 10296
    Exception: System.TypeInitializationException
    Message: The type initializer for 'Microsoft.MSCOM.MemberServices.Passport.Interop.RPSCoreSingleton' threw an exception.
    StackTrace:    at Microsoft.MSCOM.MemberServices.Passport.Interop.RPSCoreSingleton.Finalize()
    InnerException: System.Runtime.InteropServices.COMException
    Message: Retrieving the COM class factory for component with CLSID {01732742-D1A2-11D7-99EB-505054503030} failed due to the following error: 80040154.
    StackTrace:    at Microsoft.MSCOM.MemberServices.Passport.Interop.RPSCore..ctor()
       at Microsoft.MSCOM.MemberServices.Passport.Interop.RPSCoreSingleton..ctor(String reserved)
       at Microsoft.MSCOM.MemberServices.Passport.Interop.RPSCoreSingleton..ctor()
       at Microsoft.MSCOM.MemberServices.Passport.Interop.RPSCoreSingleton..cctor()
    can any one help me with this?

    Try running the SharePoint Product Configuration Wizard and see if that clears up this issue.
    Cheers
    Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
    Website http://www.WhartonComputer.com
    Blog http://MyProjectExpert.com contains my field notes and SQL queries

  • Retrieving the COM class factory for component with CLSID {479A1AAC-C148-40BB-9868-A9773DA66AF9} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).

    Hi,
    I tried to use the
    SWFToImageObject Objswfobj = new SWFToImageObject(); for Capturing the Chart as Image using SWFToImage.dll
    But whenever creating the object as above firsrt line of the code i am getting the below error. 
    Retrieving the COM class factory for component with CLSID {479A1AAC-C148-40BB-9868-A9773DA66AF9} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).
    if required any components or any solutions.
    Thaks in advance.
    Regards
    Ravikumar

    Hi,
    I am not able to find sharepoint word in your post so can you please confirm that your question is related to sharepoint?
    > Class not registered
    For you issue, this error usually comes if you don't have DLL in proper place so add SWFToImage.dll in GAC and then add this assembly reference in your project from GAC. 
    Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
    Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
    you see a reply being an answer to the question of the thread, click "Mark As Answer

  • Retrieving the COM class factory for component with CLSID {0006F03A-0000-0000-C000-000000000046} failed due to the following error: 80010001 Call was rejected by callee. (Exception from HRESULT: 0x80010001 (RPC_E_CALL_REJECTED)).Retrieving the COM class f

    Hi,
    I have created an windows service for sending the mails automatically through outlook. whenever i run the service i get the following error:
    Retrieving the COM class factory for component with CLSID {0006F03A-0000-0000-C000-000000000046} failed due to the following error: 80010001 Call was rejected by callee. (Exception from HRESULT: 0x80010001 (RPC_E_CALL_REJECTED)).Retrieving the COM class
    factory for component with CLSID {0006F03A-0000-0000-C000-000000000046} failed due to the following error: 80010001 Call was rejected by callee. (Exception from HRESULT: 0x80010001 (RPC_E_CALL_REJECTED)).
    Do you have any suggestion and solution for the above mentioned problem. Thanks.

    Hello,
    Thank you for your post.
    I am afraid that the issue is out of support range of VS General Question forum which mainly discusses the usage issue of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    I am moving your question to the moderator forum ("Where is the forum for..?"). The owner of the forum will direct you to a right forum.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Retrieving the COM class factory for component with CLSID {5BDDE329-543B-411B-A14C-5EB01519338B} failed due to the following error: 80040154.

    I am trying to run OLE Automation but I got an error during run time:
    Retrieving the COM class factory for component with CLSID {5BDDE329-543B-411B-A14C-5EB01519338B} failed due to the following error: 80040154.
    Code:
    PhotoshopTypeLibrary.PhotoshopElementsApplicationClass app = new ps.PhotoshopElementsApplicationClass();
    PhotoshopTypeLibrary.IAutoPSDoc NewDoc = app.Open(@"C:\psd1\test.psd");
    I downloaded free SDK for Photoshop SDK CS 4 and I have Photoshop element installed on my machine.
    Is this a known issue? Any help appreciated.

    Try running the SharePoint Product Configuration Wizard and see if that clears up this issue.
    Cheers
    Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
    Website http://www.WhartonComputer.com
    Blog http://MyProjectExpert.com contains my field notes and SQL queries

  • Error: the QueryInterface call on the COM component for the interface with IID '{00063033-0000-0000-C000-000000000046}' failed due to the following error: Library not registered.

    I have a outlook 2007 plugin created in VS 2008 that reads calendar meetings. This plugin also works with outlook 2010. I used to debug this application from VS 2010 as well.
    Last month, I installed Office 365 to test something. Later I uninstalled this version but after that my plugin application is crashing, every time a new appointment/meeting is created in calendar.
    I get the below error:
    Unable to cast COM object of type 'System.__ComObject' to interface type 'Microsoft.Office.Interop.Outlook._AppointmentItem'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{00063033-0000-0000-C000-000000000046}'
    failed due to the following error: Library not registered. (Exception from HRESULT: 0x8002801D (TYPE_E_LIBNOTREGISTERED)).
    Tekriti Software

    Thanks for your sharing and have a nice day.
    Yoyo Jiang[MSFT]
    MSDN Community Support | Feedback to us
    Develop and promote your apps in Windows Store
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Failed to wake NIC for hcmd

    Hi,
       Very recently my wifi has been "vanishing" all of a sudden, with no good determined scenario. Rebooting fixes the problem temporarily (so I was hoping it's software related).
       The following error messages are shown by dmesg:
    [ 2058.691869] iwlwifi 0000:01:00.0: Failed to wake NIC for hcmd
    [ 2058.691907] iwlwifi 0000:01:00.0: Error sending SCAN_REQUEST_CMD: enqueue_hcmd failed: -5
    [ 2058.691913] iwlwifi 0000:01:00.0: Scan failed! status 0x1 ret -5
    [ 2178.789055] iwlwifi 0000:01:00.0: Failed to wake NIC for hcmd
    [ 2178.789075] iwlwifi 0000:01:00.0: Error sending SCAN_REQUEST_CMD: enqueue_hcmd failed: -5
    [ 2178.789079] iwlwifi 0000:01:00.0: Scan failed! status 0x1 ret -5
    [ 2298.885158] iwlwifi 0000:01:00.0: Failed to wake NIC for hcmd
    [ 2298.885180] iwlwifi 0000:01:00.0: Error sending SCAN_REQUEST_CMD: enqueue_hcmd failed: -5
    [ 2298.885183] iwlwifi 0000:01:00.0: Scan failed! status 0x1 ret -5
       Has anyone seen that error?
    Edit: Removed stupid commentary written due to lack os good sleep.
    Regards,
    Last edited by fernando_costa (2014-10-29 04:14:11)

    I'm trying a different board and yet I got the same error:
    [Seg Dez 8 13:04:24 2014] Initializing cgroup subsys cpuset
    [Seg Dez 8 13:04:24 2014] Initializing cgroup subsys cpu
    [Seg Dez 8 13:04:24 2014] Initializing cgroup subsys cpuacct
    [Seg Dez 8 13:04:24 2014] Linux version 3.17.6-1-ARCH (builduser@foutrelis) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014
    [Seg Dez 8 13:04:24 2014] Command line: \vmlinuz-linux ro root=UUID=98e2ab9a-1b0f-4b88-8fe7-9abf238cfa3f iwlwifi.fw_monitor=1 initrd=\initramfs-linux.img
    [Seg Dez 8 13:04:24 2014] e820: BIOS-provided physical RAM map:
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x0000000000100000-0x000000009301ffff] usable
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x0000000093020000-0x000000009441ffff] reserved
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x0000000094420000-0x000000009c6befff] usable
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x000000009c6bf000-0x000000009cebefff] reserved
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
    [Seg Dez 8 13:04:24 2014] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
    [Seg Dez 8 13:04:24 2014] NX (Execute Disable) protection: active
    [Seg Dez 8 13:04:24 2014] e820: update [mem 0x91f5d018-0x91f6d057] usable ==> usable
    [Seg Dez 8 13:04:24 2014] extended physical RAM map:
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x0000000000100000-0x0000000091f5d017] usable
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x0000000091f5d018-0x0000000091f6d057] usable
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x0000000091f6d058-0x000000009301ffff] usable
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x0000000093020000-0x000000009441ffff] reserved
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x0000000094420000-0x000000009c6befff] usable
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x000000009c6bf000-0x000000009cebefff] reserved
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x000000009cfff000-0x000000009cffffff] usable
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x000000009d000000-0x000000009f9fffff] reserved
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
    [Seg Dez 8 13:04:24 2014] reserve setup_data: [mem 0x0000000100000000-0x000000025f5fffff] usable
    [Seg Dez 8 13:04:24 2014] efi: EFI v2.31 by INSYDE Corp.
    [Seg Dez 8 13:04:24 2014] efi: ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9cebef98
    [Seg Dez 8 13:04:24 2014] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000006f000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem03: type=0, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem05: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x000000000009f000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem06: type=0, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem07: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
    [Seg Dez 8 13:04:24 2014] efi: mem08: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f4f000) (15MB)
    [Seg Dez 8 13:04:24 2014] efi: mem09: type=7, attr=0xf, range=[0x0000000001f4f000-0x000000007fbfa000) (2012MB)
    [Seg Dez 8 13:04:24 2014] efi: mem10: type=2, attr=0xf, range=[0x000000007fbfa000-0x0000000080000000) (4MB)
    [Seg Dez 8 13:04:24 2014] efi: mem11: type=7, attr=0xf, range=[0x0000000080000000-0x000000008923a000) (146MB)
    [Seg Dez 8 13:04:24 2014] efi: mem12: type=1, attr=0xf, range=[0x000000008923a000-0x000000008b189000) (31MB)
    [Seg Dez 8 13:04:24 2014] efi: mem13: type=2, attr=0xf, range=[0x000000008b189000-0x000000008ed1e000) (59MB)
    [Seg Dez 8 13:04:24 2014] efi: mem14: type=7, attr=0xf, range=[0x000000008ed1e000-0x000000008fcbf000) (15MB)
    [Seg Dez 8 13:04:24 2014] efi: mem15: type=2, attr=0xf, range=[0x000000008fcbf000-0x0000000091430000) (23MB)
    [Seg Dez 8 13:04:24 2014] efi: mem16: type=4, attr=0xf, range=[0x0000000091430000-0x0000000091450000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem17: type=7, attr=0xf, range=[0x0000000091450000-0x0000000091f2a000) (10MB)
    [Seg Dez 8 13:04:24 2014] efi: mem18: type=2, attr=0xf, range=[0x0000000091f2a000-0x0000000091f35000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem19: type=7, attr=0xf, range=[0x0000000091f35000-0x0000000091f5d000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem20: type=2, attr=0xf, range=[0x0000000091f5d000-0x0000000091fbd000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem21: type=7, attr=0xf, range=[0x0000000091fbd000-0x0000000091fc3000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem22: type=2, attr=0xf, range=[0x0000000091fc3000-0x0000000091fdd000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem23: type=7, attr=0xf, range=[0x0000000091fdd000-0x0000000091fe2000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem24: type=2, attr=0xf, range=[0x0000000091fe2000-0x0000000092198000) (1MB)
    [Seg Dez 8 13:04:24 2014] efi: mem25: type=4, attr=0xf, range=[0x0000000092198000-0x0000000093020000) (14MB)
    [Seg Dez 8 13:04:24 2014] efi: mem26: type=0, attr=0xf, range=[0x0000000093020000-0x0000000094420000) (20MB)
    [Seg Dez 8 13:04:24 2014] efi: mem27: type=2, attr=0xf, range=[0x0000000094420000-0x000000009442f000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem28: type=7, attr=0xf, range=[0x000000009442f000-0x00000000945f3000) (1MB)
    [Seg Dez 8 13:04:24 2014] efi: mem29: type=1, attr=0xf, range=[0x00000000945f3000-0x000000009462f000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem30: type=7, attr=0xf, range=[0x000000009462f000-0x0000000097c91000) (54MB)
    [Seg Dez 8 13:04:24 2014] efi: mem31: type=4, attr=0xf, range=[0x0000000097c91000-0x0000000097d74000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem32: type=7, attr=0xf, range=[0x0000000097d74000-0x0000000097d93000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem33: type=4, attr=0xf, range=[0x0000000097d93000-0x000000009c0bf000) (67MB)
    [Seg Dez 8 13:04:24 2014] efi: mem34: type=7, attr=0xf, range=[0x000000009c0bf000-0x000000009c29d000) (1MB)
    [Seg Dez 8 13:04:24 2014] efi: mem35: type=3, attr=0xf, range=[0x000000009c29d000-0x000000009c6bf000) (4MB)
    [Seg Dez 8 13:04:24 2014] efi: mem36: type=5, attr=0x800000000000000f, range=[0x000000009c6bf000-0x000000009c8bf000) (2MB)
    [Seg Dez 8 13:04:24 2014] efi: mem37: type=6, attr=0x800000000000000f, range=[0x000000009c8bf000-0x000000009cabf000) (2MB)
    [Seg Dez 8 13:04:24 2014] efi: mem38: type=0, attr=0xf, range=[0x000000009cabf000-0x000000009cebf000) (4MB)
    [Seg Dez 8 13:04:24 2014] efi: mem39: type=10, attr=0xf, range=[0x000000009cebf000-0x000000009cfbf000) (1MB)
    [Seg Dez 8 13:04:24 2014] efi: mem40: type=9, attr=0xf, range=[0x000000009cfbf000-0x000000009cfff000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem41: type=4, attr=0xf, range=[0x000000009cfff000-0x000000009d000000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem42: type=7, attr=0xf, range=[0x0000000100000000-0x000000025f600000) (5622MB)
    [Seg Dez 8 13:04:24 2014] efi: mem43: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem44: type=0, attr=0x0, range=[0x000000009d000000-0x000000009fa00000) (42MB)
    [Seg Dez 8 13:04:24 2014] efi: mem45: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
    [Seg Dez 8 13:04:24 2014] efi: mem46: type=0, attr=0x0, range=[0x00000000fe101000-0x00000000fe113000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem47: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb10000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem48: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem49: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem50: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem51: type=11, attr=0x8000000000000001, range=[0x00000000fed20000-0x00000000fee01000) (0MB)
    [Seg Dez 8 13:04:24 2014] efi: mem52: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB)
    [Seg Dez 8 13:04:24 2014] SMBIOS 2.7 present.
    [Seg Dez 8 13:04:24 2014] DMI: LENOVO 20266/Yoga2, BIOS 76CN38WW 06/27/2014
    [Seg Dez 8 13:04:24 2014] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [Seg Dez 8 13:04:24 2014] e820: remove [mem 0x000a0000-0x000fffff] usable
    [Seg Dez 8 13:04:24 2014] AGP: No AGP bridge found
    [Seg Dez 8 13:04:24 2014] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
    [Seg Dez 8 13:04:24 2014] MTRR default type: uncachable
    [Seg Dez 8 13:04:24 2014] MTRR fixed ranges enabled:
    [Seg Dez 8 13:04:24 2014] 00000-9FFFF write-back
    [Seg Dez 8 13:04:24 2014] A0000-BFFFF uncachable
    [Seg Dez 8 13:04:24 2014] C0000-E7FFF write-protect
    [Seg Dez 8 13:04:24 2014] E8000-EFFFF write-combining
    [Seg Dez 8 13:04:24 2014] F0000-FFFFF write-protect
    [Seg Dez 8 13:04:24 2014] MTRR variable ranges enabled:
    [Seg Dez 8 13:04:24 2014] 0 base 0000000000 mask 7F80000000 write-back
    [Seg Dez 8 13:04:24 2014] 1 base 0080000000 mask 7FE0000000 write-back
    [Seg Dez 8 13:04:24 2014] 2 base 009D000000 mask 7FFF000000 uncachable
    [Seg Dez 8 13:04:24 2014] 3 base 009E000000 mask 7FFE000000 uncachable
    [Seg Dez 8 13:04:24 2014] 4 base 00FFC00000 mask 7FFFC00000 write-protect
    [Seg Dez 8 13:04:24 2014] 5 base 0100000000 mask 7F00000000 write-back
    [Seg Dez 8 13:04:24 2014] 6 base 0200000000 mask 7F80000000 write-back
    [Seg Dez 8 13:04:24 2014] 7 base 025F600000 mask 7FFFE00000 uncachable
    [Seg Dez 8 13:04:24 2014] 8 base 025F800000 mask 7FFF800000 uncachable
    [Seg Dez 8 13:04:24 2014] 9 base 0260000000 mask 7FE0000000 uncachable
    [Seg Dez 8 13:04:24 2014] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [Seg Dez 8 13:04:24 2014] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
    [Seg Dez 8 13:04:24 2014] Scanning 1 areas for low memory corruption
    [Seg Dez 8 13:04:24 2014] Base memory trampoline at [ffff880000082000] 82000 size 24576
    [Seg Dez 8 13:04:24 2014] Using GB pages for direct mapping
    [Seg Dez 8 13:04:24 2014] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [Seg Dez 8 13:04:24 2014] [mem 0x00000000-0x000fffff] page 4k
    [Seg Dez 8 13:04:24 2014] BRK [0x01b2b000, 0x01b2bfff] PGTABLE
    [Seg Dez 8 13:04:24 2014] BRK [0x01b2c000, 0x01b2cfff] PGTABLE
    [Seg Dez 8 13:04:24 2014] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
    [Seg Dez 8 13:04:24 2014] init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
    [Seg Dez 8 13:04:24 2014] [mem 0x25f400000-0x25f5fffff] page 2M
    [Seg Dez 8 13:04:24 2014] BRK [0x01b2e000, 0x01b2efff] PGTABLE
    [Seg Dez 8 13:04:24 2014] init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
    [Seg Dez 8 13:04:24 2014] [mem 0x25c000000-0x25f3fffff] page 2M
    [Seg Dez 8 13:04:24 2014] init_memory_mapping: [mem 0x200000000-0x25bffffff]
    [Seg Dez 8 13:04:24 2014] [mem 0x200000000-0x23fffffff] page 1G
    [Seg Dez 8 13:04:24 2014] [mem 0x240000000-0x25bffffff] page 2M
    [Seg Dez 8 13:04:24 2014] init_memory_mapping: [mem 0x00100000-0x9301ffff]
    [Seg Dez 8 13:04:24 2014] [mem 0x00100000-0x001fffff] page 4k
    [Seg Dez 8 13:04:24 2014] [mem 0x00200000-0x3fffffff] page 2M
    [Seg Dez 8 13:04:24 2014] [mem 0x40000000-0x7fffffff] page 1G
    [Seg Dez 8 13:04:24 2014] [mem 0x80000000-0x92ffffff] page 2M
    [Seg Dez 8 13:04:24 2014] [mem 0x93000000-0x9301ffff] page 4k
    [Seg Dez 8 13:04:24 2014] init_memory_mapping: [mem 0x94420000-0x9c6befff]
    [Seg Dez 8 13:04:24 2014] [mem 0x94420000-0x945fffff] page 4k
    [Seg Dez 8 13:04:24 2014] [mem 0x94600000-0x9c5fffff] page 2M
    [Seg Dez 8 13:04:24 2014] [mem 0x9c600000-0x9c6befff] page 4k
    [Seg Dez 8 13:04:24 2014] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
    [Seg Dez 8 13:04:24 2014] BRK [0x01b30000, 0x01b30fff] PGTABLE
    [Seg Dez 8 13:04:24 2014] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
    [Seg Dez 8 13:04:24 2014] [mem 0x9cfff000-0x9cffffff] page 4k
    [Seg Dez 8 13:04:24 2014] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [Seg Dez 8 13:04:24 2014] [mem 0x100000000-0x1ffffffff] page 1G
    [Seg Dez 8 13:04:24 2014] RAMDISK: [mem 0x7fbfa000-0x7fffffff]
    [Seg Dez 8 13:04:24 2014] ACPI: Early table checksum verification disabled
    [Seg Dez 8 13:04:24 2014] ACPI: RSDP 0x000000009CFFE014 000024 (v02 LENOVO)
    [Seg Dez 8 13:04:24 2014] ACPI: XSDT 0x000000009CFFE210 0000C4 (v01 LENOVO CB-01 00000001 01000013)
    [Seg Dez 8 13:04:24 2014] ACPI: FACP 0x000000009CFEB000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: DSDT 0x000000009CFDA000 00D141 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: FACS 0x000000009CFBA000 000040
    [Seg Dez 8 13:04:24 2014] ACPI: SLIC 0x000000009CFFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: UEFI 0x000000009CFFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: SSDT 0x000000009CFF0000 00B124 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: FPDT 0x000000009CFEE000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: MSDM 0x000000009CFED000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: ASF! 0x000000009CFEC000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: HPET 0x000000009CFEA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: APIC 0x000000009CFE9000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: MCFG 0x000000009CFE8000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: SSDT 0x000000009CFD7000 002028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: BOOT 0x000000009CFD5000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: LPIT 0x000000009CFD4000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: ASPT 0x000000009CFD2000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: DBGP 0x000000009CFD1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: SSDT 0x000000009CFCE000 000539 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: SSDT 0x000000009CFCD000 000AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: SSDT 0x000000009CFC9000 003496 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: SSDT 0x000000009CFC8000 0007C7 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: BGRT 0x000000009CFC7000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [Seg Dez 8 13:04:24 2014] ACPI: Local APIC address 0xfee00000
    [Seg Dez 8 13:04:24 2014] No NUMA configuration found
    [Seg Dez 8 13:04:24 2014] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
    [Seg Dez 8 13:04:24 2014] Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
    [Seg Dez 8 13:04:24 2014] NODE_DATA [mem 0x25f5f9000-0x25f5fcfff]
    [Seg Dez 8 13:04:24 2014] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256c00000-ffff88025ebfffff] on node 0
    [Seg Dez 8 13:04:24 2014] Zone ranges:
    [Seg Dez 8 13:04:24 2014] DMA [mem 0x00001000-0x00ffffff]
    [Seg Dez 8 13:04:24 2014] DMA32 [mem 0x01000000-0xffffffff]
    [Seg Dez 8 13:04:24 2014] Normal [mem 0x100000000-0x25f5fffff]
    [Seg Dez 8 13:04:24 2014] Movable zone start for each node
    [Seg Dez 8 13:04:24 2014] Early memory node ranges
    [Seg Dez 8 13:04:24 2014] node 0: [mem 0x00001000-0x0006efff]
    [Seg Dez 8 13:04:24 2014] node 0: [mem 0x00070000-0x00087fff]
    [Seg Dez 8 13:04:24 2014] node 0: [mem 0x00100000-0x9301ffff]
    [Seg Dez 8 13:04:24 2014] node 0: [mem 0x94420000-0x9c6befff]
    [Seg Dez 8 13:04:24 2014] node 0: [mem 0x9cfff000-0x9cffffff]
    [Seg Dez 8 13:04:24 2014] node 0: [mem 0x100000000-0x25f5fffff]
    [Seg Dez 8 13:04:24 2014] On node 0 totalpages: 2074694
    [Seg Dez 8 13:04:24 2014] DMA zone: 64 pages used for memmap
    [Seg Dez 8 13:04:24 2014] DMA zone: 21 pages reserved
    [Seg Dez 8 13:04:24 2014] DMA zone: 3974 pages, LIFO batch:0
    [Seg Dez 8 13:04:24 2014] DMA32 zone: 9867 pages used for memmap
    [Seg Dez 8 13:04:24 2014] DMA32 zone: 631488 pages, LIFO batch:31
    [Seg Dez 8 13:04:24 2014] Normal zone: 22488 pages used for memmap
    [Seg Dez 8 13:04:24 2014] Normal zone: 1439232 pages, LIFO batch:31
    [Seg Dez 8 13:04:24 2014] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
    [Seg Dez 8 13:04:24 2014] ACPI: PM-Timer IO Port: 0x1808
    [Seg Dez 8 13:04:24 2014] ACPI: Local APIC address 0xfee00000
    [Seg Dez 8 13:04:24 2014] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [Seg Dez 8 13:04:24 2014] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [Seg Dez 8 13:04:24 2014] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [Seg Dez 8 13:04:24 2014] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [Seg Dez 8 13:04:24 2014] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [Seg Dez 8 13:04:24 2014] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [Seg Dez 8 13:04:24 2014] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [Seg Dez 8 13:04:24 2014] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [Seg Dez 8 13:04:24 2014] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [Seg Dez 8 13:04:24 2014] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
    [Seg Dez 8 13:04:24 2014] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [Seg Dez 8 13:04:24 2014] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [Seg Dez 8 13:04:24 2014] ACPI: IRQ0 used by override.
    [Seg Dez 8 13:04:24 2014] ACPI: IRQ9 used by override.
    [Seg Dez 8 13:04:24 2014] Using ACPI (MADT) for SMP configuration information
    [Seg Dez 8 13:04:24 2014] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [Seg Dez 8 13:04:24 2014] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0x91f5d000-0x91f5dfff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0x91f6d000-0x91f6dfff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0x93020000-0x9441ffff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0x9c6bf000-0x9cebefff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
    [Seg Dez 8 13:04:24 2014] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
    [Seg Dez 8 13:04:24 2014] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [Seg Dez 8 13:04:24 2014] Booting paravirtualized kernel on bare hardware
    [Seg Dez 8 13:04:24 2014] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [Seg Dez 8 13:04:24 2014] PERCPU: Embedded 28 pages/cpu @ffff88025f200000 s82752 r8192 d23744 u262144
    [Seg Dez 8 13:04:24 2014] pcpu-alloc: s82752 r8192 d23744 u262144 alloc=1*2097152
    [Seg Dez 8 13:04:24 2014] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [Seg Dez 8 13:04:24 2014] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2042254
    [Seg Dez 8 13:04:24 2014] Policy zone: Normal
    [Seg Dez 8 13:04:24 2014] Kernel command line: \vmlinuz-linux ro root=UUID=98e2ab9a-1b0f-4b88-8fe7-9abf238cfa3f iwlwifi.fw_monitor=1 initrd=\initramfs-linux.img
    [Seg Dez 8 13:04:24 2014] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [Seg Dez 8 13:04:24 2014] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [Seg Dez 8 13:04:24 2014] AGP: Checking aperture...
    [Seg Dez 8 13:04:24 2014] AGP: No AGP bridge found
    [Seg Dez 8 13:04:24 2014] Calgary: detecting Calgary via BIOS EBDA area
    [Seg Dez 8 13:04:24 2014] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [Seg Dez 8 13:04:24 2014] Memory: 7995804K/8298776K available (5386K kernel code, 897K rwdata, 1712K rodata, 1136K init, 1176K bss, 302972K reserved)
    [Seg Dez 8 13:04:24 2014] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [Seg Dez 8 13:04:24 2014] Preemptible hierarchical RCU implementation.
    [Seg Dez 8 13:04:24 2014] RCU dyntick-idle grace-period acceleration is enabled.
    [Seg Dez 8 13:04:24 2014] Dump stacks of tasks blocking RCU-preempt GP.
    [Seg Dez 8 13:04:24 2014] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [Seg Dez 8 13:04:24 2014] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [Seg Dez 8 13:04:24 2014] NR_IRQS:8448 nr_irqs:760 0
    [Seg Dez 8 13:04:24 2014] Console: colour dummy device 80x25
    [Seg Dez 8 13:04:24 2014] console [tty0] enabled
    [Seg Dez 8 13:04:24 2014] allocated 33554432 bytes of page_cgroup
    [Seg Dez 8 13:04:24 2014] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [Seg Dez 8 13:04:24 2014] hpet clockevent registered
    [Seg Dez 8 13:04:24 2014] tsc: Fast TSC calibration failed
    [Seg Dez 8 13:04:24 2014] tsc: PIT calibration matches HPET. 1 loops
    [Seg Dez 8 13:04:24 2014] tsc: Detected 2394.449 MHz processor
    [Seg Dez 8 13:04:24 2014] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.43 BogoMIPS (lpj=7981496)
    [Seg Dez 8 13:04:24 2014] pid_max: default: 32768 minimum: 301
    [Seg Dez 8 13:04:24 2014] ACPI: Core revision 20140724
    [Seg Dez 8 13:04:24 2014] ACPI: All ACPI Tables successfully acquired
    [Seg Dez 8 13:04:24 2014] Security Framework initialized
    [Seg Dez 8 13:04:24 2014] Yama: becoming mindful.
    [Seg Dez 8 13:04:24 2014] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [Seg Dez 8 13:04:24 2014] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [Seg Dez 8 13:04:24 2014] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [Seg Dez 8 13:04:24 2014] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [Seg Dez 8 13:04:24 2014] Initializing cgroup subsys memory
    [Seg Dez 8 13:04:24 2014] Initializing cgroup subsys devices
    [Seg Dez 8 13:04:24 2014] Initializing cgroup subsys freezer
    [Seg Dez 8 13:04:24 2014] Initializing cgroup subsys net_cls
    [Seg Dez 8 13:04:24 2014] Initializing cgroup subsys blkio
    [Seg Dez 8 13:04:24 2014] CPU: Physical Processor ID: 0
    [Seg Dez 8 13:04:24 2014] CPU: Processor Core ID: 0
    [Seg Dez 8 13:04:24 2014] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [Seg Dez 8 13:04:24 2014] mce: CPU supports 7 MCE banks
    [Seg Dez 8 13:04:24 2014] CPU0: Thermal monitoring enabled (TM1)
    [Seg Dez 8 13:04:24 2014] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    [Seg Dez 8 13:04:24 2014] Freeing SMP alternatives memory: 20K (ffffffff819fe000 - ffffffff81a03000)
    [Seg Dez 8 13:04:24 2014] ftrace: allocating 20687 entries in 81 pages
    [Seg Dez 8 13:04:24 2014] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [Seg Dez 8 13:04:24 2014] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (fam: 06, model: 45, stepping: 01)
    [Seg Dez 8 13:04:24 2014] TSC deadline timer enabled
    [Seg Dez 8 13:04:24 2014] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [Seg Dez 8 13:04:24 2014] ... version: 3
    [Seg Dez 8 13:04:24 2014] ... bit width: 48
    [Seg Dez 8 13:04:24 2014] ... generic registers: 4
    [Seg Dez 8 13:04:24 2014] ... value mask: 0000ffffffffffff
    [Seg Dez 8 13:04:24 2014] ... max period: 0000ffffffffffff
    [Seg Dez 8 13:04:24 2014] ... fixed-purpose events: 3
    [Seg Dez 8 13:04:24 2014] ... event mask: 000000070000000f
    [Seg Dez 8 13:04:24 2014] x86: Booting SMP configuration:
    [Seg Dez 8 13:04:24 2014] .... node #0, CPUs: #1
    [Seg Dez 8 13:04:24 2014] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [Seg Dez 8 13:04:24 2014] #2 #3
    [Seg Dez 8 13:04:24 2014] x86: Booted up 1 node, 4 CPUs
    [Seg Dez 8 13:04:24 2014] smpboot: Total of 4 processors activated (19163.74 BogoMIPS)
    [Seg Dez 8 13:04:24 2014] devtmpfs: initialized
    [Seg Dez 8 13:04:24 2014] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
    [Seg Dez 8 13:04:24 2014] pinctrl core: initialized pinctrl subsystem
    [Seg Dez 8 13:04:24 2014] RTC time: 15:04:24, date: 12/08/14
    [Seg Dez 8 13:04:24 2014] NET: Registered protocol family 16
    [Seg Dez 8 13:04:24 2014] cpuidle: using governor ladder
    [Seg Dez 8 13:04:24 2014] cpuidle: using governor menu
    [Seg Dez 8 13:04:24 2014] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [Seg Dez 8 13:04:24 2014] ACPI: bus type PCI registered
    [Seg Dez 8 13:04:24 2014] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [Seg Dez 8 13:04:24 2014] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [Seg Dez 8 13:04:24 2014] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [Seg Dez 8 13:04:24 2014] PCI: Using configuration type 1 for base access
    [Seg Dez 8 13:04:24 2014] ACPI: Added _OSI(Module Device)
    [Seg Dez 8 13:04:24 2014] ACPI: Added _OSI(Processor Device)
    [Seg Dez 8 13:04:24 2014] ACPI: Added _OSI(3.0 _SCP Extensions)
    [Seg Dez 8 13:04:24 2014] ACPI: Added _OSI(Processor Aggregator Device)
    [Seg Dez 8 13:04:24 2014] ACPI: Executed 1 blocks of module-level executable AML code
    [Seg Dez 8 13:04:24 2014] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [Seg Dez 8 13:04:24 2014] ACPI: Dynamic OEM Table Load:
    [Seg Dez 8 13:04:24 2014] ACPI: SSDT 0xFFFF880253590800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
    [Seg Dez 8 13:04:24 2014] ACPI: Dynamic OEM Table Load:
    [Seg Dez 8 13:04:24 2014] ACPI: SSDT 0xFFFF880253589000 0005AA (v01 PmRef ApIst 00003000 INTL 20121220)
    [Seg Dez 8 13:04:24 2014] ACPI: Dynamic OEM Table Load:
    [Seg Dez 8 13:04:24 2014] ACPI: SSDT 0xFFFF88025355EA00 000119 (v01 PmRef ApCst 00003000 INTL 20121220)
    [Seg Dez 8 13:04:24 2014] ACPI: Interpreter enabled
    [Seg Dez 8 13:04:24 2014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
    [Seg Dez 8 13:04:24 2014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
    [Seg Dez 8 13:04:24 2014] ACPI: (supports S0 S3 S4 S5)
    [Seg Dez 8 13:04:24 2014] ACPI: Using IOAPIC for interrupt routing
    [Seg Dez 8 13:04:24 2014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [Seg Dez 8 13:04:24 2014] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [Seg Dez 8 13:04:24 2014] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [Seg Dez 8 13:04:24 2014] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [Seg Dez 8 13:04:24 2014] PCI host bridge to bus 0000:00
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: root bus resource [bus 00-fe]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [Seg Dez 8 13:04:24 2014] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [Seg Dez 8 13:04:24 2014] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [Seg Dez 8 13:04:24 2014] pci 0000:00:03.0: reg 0x10: [mem 0xb0518000-0xb051bfff 64bit]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
    [Seg Dez 8 13:04:24 2014] pci 0000:00:04.0: reg 0x10: [mem 0xb0510000-0xb0517fff 64bit]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [Seg Dez 8 13:04:24 2014] pci 0000:00:14.0: reg 0x10: [mem 0xb0500000-0xb050ffff 64bit]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [Seg Dez 8 13:04:24 2014] pci 0000:00:14.0: System wakeup disabled by ACPI
    [Seg Dez 8 13:04:24 2014] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [Seg Dez 8 13:04:24 2014] pci 0000:00:16.0: reg 0x10: [mem 0xb0520000-0xb052001f 64bit]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1b.0: reg 0x10: [mem 0xb051c000-0xb051ffff 64bit]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1d.0: reg 0x10: [mem 0xb0524000-0xb05243ff]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1f.2: reg 0x24: [mem 0xb0523000-0xb05237ff]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1f.2: PME# supported from D3hot
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1f.3: reg 0x10: [mem 0xb0521000-0xb05210ff 64bit]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1f.6: reg 0x10: [mem 0xb0522000-0xb0522fff 64bit]
    [Seg Dez 8 13:04:24 2014] pci 0000:01:00.0: [8086:08b2] type 00 class 0x028000
    [Seg Dez 8 13:04:24 2014] pci 0000:01:00.0: reg 0x10: [mem 0xb0400000-0xb0401fff 64bit]
    [Seg Dez 8 13:04:24 2014] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    [Seg Dez 8 13:04:24 2014] pci 0000:01:00.0: System wakeup disabled by ACPI
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff]
    [Seg Dez 8 13:04:24 2014] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [Seg Dez 8 13:04:24 2014] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [Seg Dez 8 13:04:24 2014] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [Seg Dez 8 13:04:24 2014] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [Seg Dez 8 13:04:24 2014] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [Seg Dez 8 13:04:24 2014] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [Seg Dez 8 13:04:24 2014] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [Seg Dez 8 13:04:24 2014] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [Seg Dez 8 13:04:24 2014] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [Seg Dez 8 13:04:24 2014] ACPI: Enabled 5 GPEs in block 00 to 7F
    [Seg Dez 8 13:04:24 2014] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
    [Seg Dez 8 13:04:24 2014] vgaarb: setting as boot device: PCI:0000:00:02.0
    [Seg Dez 8 13:04:24 2014] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [Seg Dez 8 13:04:24 2014] vgaarb: loaded
    [Seg Dez 8 13:04:24 2014] vgaarb: bridge control possible 0000:00:02.0
    [Seg Dez 8 13:04:24 2014] PCI: Using ACPI for IRQ routing
    [Seg Dez 8 13:04:24 2014] PCI: pci_cache_line_size set to 64 bytes
    [Seg Dez 8 13:04:24 2014] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
    [Seg Dez 8 13:04:24 2014] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
    [Seg Dez 8 13:04:24 2014] e820: reserve RAM buffer [mem 0x91f5d018-0x93ffffff]
    [Seg Dez 8 13:04:24 2014] e820: reserve RAM buffer [mem 0x93020000-0x93ffffff]
    [Seg Dez 8 13:04:24 2014] e820: reserve RAM buffer [mem 0x9c6bf000-0x9fffffff]
    [Seg Dez 8 13:04:24 2014] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
    [Seg Dez 8 13:04:24 2014] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
    [Seg Dez 8 13:04:24 2014] NetLabel: Initializing
    [Seg Dez 8 13:04:24 2014] NetLabel: domain hash size = 128
    [Seg Dez 8 13:04:24 2014] NetLabel: protocols = UNLABELED CIPSOv4
    [Seg Dez 8 13:04:24 2014] NetLabel: unlabeled traffic allowed by default
    [Seg Dez 8 13:04:24 2014] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [Seg Dez 8 13:04:24 2014] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [Seg Dez 8 13:04:24 2014] Switched to clocksource hpet
    [Seg Dez 8 13:04:24 2014] pnp: PnP ACPI init
    [Seg Dez 8 13:04:24 2014] system 00:00: [io 0x0680-0x069f] has been reserved
    [Seg Dez 8 13:04:24 2014] system 00:00: [io 0xffff] has been reserved
    [Seg Dez 8 13:04:24 2014] system 00:00: [io 0xffff] has been reserved
    [Seg Dez 8 13:04:24 2014] system 00:00: [io 0xffff] has been reserved
    [Seg Dez 8 13:04:24 2014] system 00:00: [io 0x1800-0x18fe] could not be reserved
    [Seg Dez 8 13:04:24 2014] system 00:00: [io 0x164e-0x164f] has been reserved
    [Seg Dez 8 13:04:24 2014] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [Seg Dez 8 13:04:24 2014] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [Seg Dez 8 13:04:24 2014] system 00:02: [io 0x1854-0x1857] has been reserved
    [Seg Dez 8 13:04:24 2014] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [Seg Dez 8 13:04:24 2014] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    [Seg Dez 8 13:04:24 2014] pnp 00:04: Plug and Play ACPI device, IDs SYN2b2c SYN2b00 SYN0002 PNP0f13 (active)
    [Seg Dez 8 13:04:24 2014] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [Seg Dez 8 13:04:24 2014] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
    [Seg Dez 8 13:04:24 2014] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
    [Seg Dez 8 13:04:24 2014] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
    [Seg Dez 8 13:04:24 2014] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
    [Seg Dez 8 13:04:24 2014] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
    [Seg Dez 8 13:04:24 2014] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
    [Seg Dez 8 13:04:24 2014] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
    [Seg Dez 8 13:04:24 2014] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
    [Seg Dez 8 13:04:24 2014] system 00:05: [mem 0x9fa20000-0x9fa20fff] has been reserved
    [Seg Dez 8 13:04:24 2014] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved
    [Seg Dez 8 13:04:24 2014] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [Seg Dez 8 13:04:24 2014] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [Seg Dez 8 13:04:24 2014] pnp: PnP ACPI: found 7 devices
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [Seg Dez 8 13:04:24 2014] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:00: resource 15 [mem 0x9fa00000-0xfeafffff]
    [Seg Dez 8 13:04:24 2014] pci_bus 0000:01: resource 1 [mem 0xb0400000-0xb04fffff]
    [Seg Dez 8 13:04:24 2014] NET: Registered protocol family 2
    [Seg Dez 8 13:04:24 2014] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [Seg Dez 8 13:04:24 2014] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [Seg Dez 8 13:04:24 2014] TCP: Hash tables configured (established 65536 bind 65536)
    [Seg Dez 8 13:04:24 2014] TCP: reno registered
    [Seg Dez 8 13:04:24 2014] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [Seg Dez 8 13:04:24 2014] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [Seg Dez 8 13:04:24 2014] NET: Registered protocol family 1
    [Seg Dez 8 13:04:24 2014] pci 0000:00:02.0: Video device with shadowed ROM
    [Seg Dez 8 13:04:24 2014] PCI: CLS 64 bytes, default 64
    [Seg Dez 8 13:04:24 2014] Unpacking initramfs...
    [Seg Dez 8 13:04:24 2014] Freeing initrd memory: 4120K (ffff88007fbfa000 - ffff880080000000)
    [Seg Dez 8 13:04:24 2014] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [Seg Dez 8 13:04:24 2014] software IO TLB [mem 0x8d430000-0x91430000] (64MB) mapped at [ffff88008d430000-ffff88009142ffff]
    [Seg Dez 8 13:04:24 2014] Simple Boot Flag at 0x44 set to 0x1
    [Seg Dez 8 13:04:24 2014] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [Seg Dez 8 13:04:24 2014] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
    [Seg Dez 8 13:04:24 2014] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
    [Seg Dez 8 13:04:24 2014] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
    [Seg Dez 8 13:04:24 2014] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
    [Seg Dez 8 13:04:24 2014] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [Seg Dez 8 13:04:24 2014] Scanning for low memory corruption every 60 seconds
    [Seg Dez 8 13:04:24 2014] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [Seg Dez 8 13:04:24 2014] Initialise system trusted keyring
    [Seg Dez 8 13:04:24 2014] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [Seg Dez 8 13:04:24 2014] zpool: loaded
    [Seg Dez 8 13:04:24 2014] zbud: loaded
    [Seg Dez 8 13:04:24 2014] VFS: Disk quotas dquot_6.5.2
    [Seg Dez 8 13:04:24 2014] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [Seg Dez 8 13:04:24 2014] msgmni has been set to 15798
    [Seg Dez 8 13:04:24 2014] Key type big_key registered
    [Seg Dez 8 13:04:24 2014] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [Seg Dez 8 13:04:24 2014] io scheduler noop registered
    [Seg Dez 8 13:04:24 2014] io scheduler deadline registered
    [Seg Dez 8 13:04:24 2014] io scheduler cfq registered (default)
    [Seg Dez 8 13:04:24 2014] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [Seg Dez 8 13:04:24 2014] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [Seg Dez 8 13:04:24 2014] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [Seg Dez 8 13:04:24 2014] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [Seg Dez 8 13:04:24 2014] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [Seg Dez 8 13:04:24 2014] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [Seg Dez 8 13:04:24 2014] efifb: probing for efifb
    [Seg Dez 8 13:04:24 2014] efifb: framebuffer at 0xa0000000, mapped to 0xffffc90010f00000, using 22500k, total 22500k
    [Seg Dez 8 13:04:24 2014] efifb: mode is 3200x1800x32, linelength=12800, pages=1
    [Seg Dez 8 13:04:24 2014] efifb: scrolling: redraw
    [Seg Dez 8 13:04:24 2014] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [Seg Dez 8 13:04:24 2014] Console: switching to colour frame buffer device 400x112
    [Seg Dez 8 13:04:24 2014] fb0: EFI VGA frame buffer device
    [Seg Dez 8 13:04:24 2014] intel_idle: MWAIT substates: 0x11142120
    [Seg Dez 8 13:04:24 2014] intel_idle: v0.4 model 0x45
    [Seg Dez 8 13:04:24 2014] intel_idle: lapic_timer_reliable_states 0xffffffff
    [Seg Dez 8 13:04:24 2014] GHES: HEST is not enabled!
    [Seg Dez 8 13:04:24 2014] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [Seg Dez 8 13:04:24 2014] Linux agpgart interface v0.103
    [Seg Dez 8 13:04:24 2014] rtc_cmos 00:01: RTC can wake from S4
    [Seg Dez 8 13:04:24 2014] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [Seg Dez 8 13:04:24 2014] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
    [Seg Dez 8 13:04:24 2014] Intel P-state driver initializing.
    [Seg Dez 8 13:04:24 2014] ledtrig-cpu: registered to indicate activity on CPUs
    [Seg Dez 8 13:04:24 2014] TCP: cubic registered
    [Seg Dez 8 13:04:24 2014] NET: Registered protocol family 10
    [Seg Dez 8 13:04:24 2014] NET: Registered protocol family 17
    [Seg Dez 8 13:04:24 2014] Loading compiled-in X.509 certificates
    [Seg Dez 8 13:04:24 2014] registered taskstats version 1
    [Seg Dez 8 13:04:24 2014] Magic number: 10:740:82
    [Seg Dez 8 13:04:24 2014] rtc_cmos 00:01: setting system clock to 2014-12-08 15:04:24 UTC (1418051064)
    [Seg Dez 8 13:04:24 2014] PM: Hibernation image not present or could not be loaded.
    [Seg Dez 8 13:04:24 2014] Freeing unused kernel memory: 1136K (ffffffff818e2000 - ffffffff819fe000)
    [Seg Dez 8 13:04:24 2014] Write protecting the kernel read-only data: 8192k
    [Seg Dez 8 13:04:24 2014] Freeing unused kernel memory: 748K (ffff880001545000 - ffff880001600000)
    [Seg Dez 8 13:04:24 2014] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
    [Seg Dez 8 13:04:24 2014] random: systemd-tmpfile urandom read with 4 bits of entropy available
    [Seg Dez 8 13:04:24 2014] [drm] Initialized drm 1.1.0 20060810
    [Seg Dez 8 13:04:24 2014] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
    [Seg Dez 8 13:04:24 2014] ACPI: Lid Switch [LID0]
    [Seg Dez 8 13:04:24 2014] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
    [Seg Dez 8 13:04:24 2014] ACPI: Power Button [PWRB]
    [Seg Dez 8 13:04:24 2014] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [Seg Dez 8 13:04:24 2014] ACPI: Power Button [PWRF]
    [Seg Dez 8 13:04:24 2014] [drm] Memory usable by graphics device = 2048M
    [Seg Dez 8 13:04:24 2014] checking generic (a0000000 15f9000) vs hw (a0000000 10000000)
    [Seg Dez 8 13:04:24 2014] fb: switching to inteldrmfb from EFI VGA
    [Seg Dez 8 13:04:24 2014] Console: switching to colour dummy device 80x25
    [Seg Dez 8 13:04:24 2014] [drm] Replacing VGA console driver
    [Seg Dez 8 13:04:24 2014] i915 0000:00:02.0: irq 41 for MSI/MSI-X
    [Seg Dez 8 13:04:24 2014] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [Seg Dez 8 13:04:24 2014] [drm] Driver supports precise vblank timestamp query.
    [Seg Dez 8 13:04:24 2014] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [Seg Dez 8 13:04:24 2014] [drm] VBT doesn't support DRRS
    [Seg Dez 8 13:04:24 2014] fbcon: inteldrmfb (fb0) is primary device
    [Seg Dez 8 13:04:25 2014] tsc: Refined TSC clocksource calibration: 2394.456 MHz
    [Seg Dez 8 13:04:25 2014] Console: switching to colour frame buffer device 400x112
    [Seg Dez 8 13:04:25 2014] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [Seg Dez 8 13:04:25 2014] i915 0000:00:02.0: registered panic notifier
    [Seg Dez 8 13:04:25 2014] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [Seg Dez 8 13:04:25 2014] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
    [Seg Dez 8 13:04:25 2014] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
    [Seg Dez 8 13:04:25 2014] sdhci: Secure Digital Host Controller Interface driver
    [Seg Dez 8 13:04:25 2014] sdhci: Copyright(c) Pierre Ossman
    [Seg Dez 8 13:04:25 2014] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [Seg Dez 8 13:04:25 2014] ACPI: bus type USB registered
    [Seg Dez 8 13:04:25 2014] usbcore: registered new interface driver usbfs
    [Seg Dez 8 13:04:25 2014] usbcore: registered new interface driver hub
    [Seg Dez 8 13:04:25 2014] SCSI subsystem initialized
    [Seg Dez 8 13:04:25 2014] usbcore: registered new device driver usb
    [Seg Dez 8 13:04:25 2014] serio: i8042 KBD port at 0x60,0x64 irq 1
    [Seg Dez 8 13:04:25 2014] serio: i8042 AUX port at 0x60,0x64 irq 12
    [Seg Dez 8 13:04:25 2014] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [Seg Dez 8 13:04:25 2014] ehci-pci: EHCI PCI platform driver
    [Seg Dez 8 13:04:25 2014] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [Seg Dez 8 13:04:25 2014] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [Seg Dez 8 13:04:25 2014] ehci-pci 0000:00:1d.0: debug port 2
    [Seg Dez 8 13:04:25 2014] libata version 3.00 loaded.
    [Seg Dez 8 13:04:25 2014] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [Seg Dez 8 13:04:25 2014] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb0524000
    [Seg Dez 8 13:04:25 2014] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [Seg Dez 8 13:04:25 2014] hub 1-0:1.0: USB hub found
    [Seg Dez 8 13:04:25 2014] hub 1-0:1.0: 2 ports detected
    [Seg Dez 8 13:04:25 2014] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [Seg Dez 8 13:04:25 2014] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [Seg Dez 8 13:04:25 2014] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [Seg Dez 8 13:04:25 2014] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
    [Seg Dez 8 13:04:25 2014] hub 2-0:1.0: USB hub found
    [Seg Dez 8 13:04:25 2014] hub 2-0:1.0: 9 ports detected
    [Seg Dez 8 13:04:25 2014] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [Seg Dez 8 13:04:25 2014] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [Seg Dez 8 13:04:25 2014] hub 3-0:1.0: USB hub found
    [Seg Dez 8 13:04:25 2014] hub 3-0:1.0: 4 ports detected
    [Seg Dez 8 13:04:25 2014] ahci 0000:00:1f.2: version 3.0
    [Seg Dez 8 13:04:25 2014] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [Seg Dez 8 13:04:25 2014] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
    [Seg Dez 8 13:04:25 2014] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
    [Seg Dez 8 13:04:25 2014] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
    [Seg Dez 8 13:04:25 2014] scsi host0: ahci
    [Seg Dez 8 13:04:25 2014] scsi host1: ahci
    [Seg Dez 8 13:04:25 2014] ata1: DUMMY
    [Seg Dez 8 13:04:25 2014] ata2: SATA max UDMA/133 abar m2048@0xb0523000 port 0xb0523180 irq 43
    [Seg Dez 8 13:04:26 2014] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [Seg Dez 8 13:04:26 2014] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
    [Seg Dez 8 13:04:26 2014] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
    [Seg Dez 8 13:04:26 2014] ata2.00: ATA-9: SAMSUNG MZMTD256HAGM-000L1, DXT43L0Q, max UDMA/133
    [Seg Dez 8 13:04:26 2014] ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [Seg Dez 8 13:04:26 2014] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
    [Seg Dez 8 13:04:26 2014] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
    [Seg Dez 8 13:04:26 2014] ata2.00: configured for UDMA/133
    [Seg Dez 8 13:04:26 2014] scsi 1:0:0:0: Direct-Access ATA SAMSUNG MZMTD256 3L0Q PQ: 0 ANSI: 5
    [Seg Dez 8 13:04:26 2014] sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [Seg Dez 8 13:04:26 2014] sd 1:0:0:0: [sda] Write Protect is off
    [Seg Dez 8 13:04:26 2014] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [Seg Dez 8 13:04:26 2014] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [Seg Dez 8 13:04:26 2014] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
    [Seg Dez 8 13:04:26 2014] sd 1:0:0:0: [sda] Attached SCSI disk
    [Seg Dez 8 13:04:26 2014] usb 2-4: new full-speed USB device number 2 using xhci_hcd
    [Seg Dez 8 13:04:26 2014] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [Seg Dez 8 13:04:26 2014] Switched to clocksource tsc
    [Seg Dez 8 13:04:26 2014] usb 2-6: new full-speed USB device number 3 using xhci_hcd
    [Seg Dez 8 13:04:26 2014] systemd[1]: systemd 217 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN )
    [Seg Dez 8 13:04:26 2014] systemd[1]: Detected architecture 'x86-64'.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Set hostname to <Beteugeuse>.
    [Seg Dez 8 13:04:26 2014] usb 2-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
    [Seg Dez 8 13:04:26 2014] usb 2-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Login Prompts.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Reached target Login Prompts.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Remote File Systems.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Reached target Remote File Systems.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Paths.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Reached target Paths.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Encrypted Volumes.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Reached target Encrypted Volumes.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Expecting device dev-sda8.device...
    [Seg Dez 8 13:04:26 2014] systemd[1]: Expecting device dev-sda4.device...
    [Seg Dez 8 13:04:26 2014] systemd[1]: Expecting device dev-sda6.device...
    [Seg Dez 8 13:04:26 2014] systemd[1]: Expecting device dev-sda7.device...
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Root Slice.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Created slice Root Slice.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting User and Session Slice.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Created slice User and Session Slice.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Delayed Shutdown Socket.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Listening on Delayed Shutdown Socket.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Journal Socket (/dev/log).
    [Seg Dez 8 13:04:26 2014] systemd[1]: Listening on Journal Socket (/dev/log).
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting LVM2 metadata daemon socket.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Listening on LVM2 metadata daemon socket.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting udev Kernel Socket.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Listening on udev Kernel Socket.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting udev Control Socket.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Listening on udev Control Socket.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Journal Socket.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Listening on Journal Socket.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting System Slice.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Created slice System Slice.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting system-getty.slice.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Created slice system-getty.slice.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting File System Check on Root Device...
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Mounting Debug File System...
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Setup Virtual Console...
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [Seg Dez 8 13:04:26 2014] systemd[1]: Started Set Up Additional Binary Formats.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Mounting POSIX Message Queue File System...
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Load Kernel Modules...
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting udev Coldplug all Devices...
    [Seg Dez 8 13:04:26 2014] systemd[1]: Mounting Huge Pages File System...
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Journal Service...
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Slices.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Reached target Slices.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Mounted POSIX Message Queue File System.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Mounted Debug File System.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Mounted Huge Pages File System.
    [Seg Dez 8 13:04:26 2014] usbip_core: USB/IP Core v1.0.0
    [Seg Dez 8 13:04:26 2014] systemd[1]: Started udev Coldplug all Devices.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Started File System Check on Root Device.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Remount Root and Kernel File Systems...
    [Seg Dez 8 13:04:26 2014] EXT4-fs (sda5): re-mounted. Opts: data=ordered,discard
    [Seg Dez 8 13:04:26 2014] systemd[1]: Started Remount Root and Kernel File Systems.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Started First Boot Wizard.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Started Rebuild Dynamic Linker Cache.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Started Create System Users.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Starting Create Static Device Nodes in /dev...
    [Seg Dez 8 13:04:26 2014] systemd[1]: Started Rebuild Hardware Database.
    [Seg Dez 8 13:04:26 2014] systemd[1]: Started Journal Service.
    [Seg Dez 8 13:04:26 2014] usb 2-7: new full-speed USB device number 4 using xhci_hcd
    [Seg Dez 8 13:04:26 2014] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [Seg Dez 8 13:04:26 2014] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
    [Seg Dez 8 13:04:26 2014] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [Seg Dez 8 13:04:26 2014] snd_hda_intel 0000:00:03.0: irq 46 for MSI/MSI-X
    [Seg Dez 8 13:04:26 2014] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [Seg Dez 8 13:04:26 2014] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [Seg Dez 8 13:04:26 2014] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
    [Seg Dez 8 13:04:26 2014] sound hdaudioC1D0: mono: mono_out=0x0
    [Seg Dez 8 13:04:26 2014] sound hdaudioC1D0: inputs:
    [Seg Dez 8 13:04:26 2014] sound hdaudioC1D0: Mic=0x19
    [Seg Dez 8 13:04:26 2014] sound hdaudioC1D0: Internal Mic=0x12
    [Seg Dez 8 13:04:26 2014] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
    [Seg Dez 8 13:04:26 2014] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
    [Seg Dez 8 13:04:26 2014] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
    [Seg Dez 8 13:04:26 2014] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input6
    [Seg Dez 8 13:04:26 2014] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
    [Seg Dez 8 13:04:26 2014] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
    [Seg Dez 8 13:04:26 2014] ACPI: AC Adapter [ADP1] (on-line)
    [Seg Dez 8 13:04:26 2014] hidraw: raw HID events driver (C) Jiri Kosina
    [Seg Dez 8 13:04:26 2014] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input12
    [Seg Dez 8 13:04:26 2014] ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305f conflicts with OpRegion 0x0000000000003040-0x000000000000304f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
    [Seg Dez 8 13:04:26 2014] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [Seg Dez 8 13:04:26 2014] input: PC Speaker as /devices/platform/pcspkr/input/input13
    [Seg Dez 8 13:04:26 2014] cfg80211: Calling CRDA to update world regulatory domain
    [Seg Dez 8 13:04:26 2014] ACPI: Battery Slot [BAT1] (battery present)
    [Seg Dez 8 13:04:26 2014] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [Seg Dez 8 13:04:26 2014] Copyright(c) 2003- 2014 Intel Corporation
    [Seg Dez 8 13:04:26 2014] iwlwifi 0000:01:00.0: irq 47 for MSI/MSI-X
    [Seg Dez 8 13:04:26 2014] thermal LNXTHERM:00: registered as thermal_zone0
    [Seg Dez 8 13:04:26 2014] ACPI: Thermal Zone [TZ01] (56 C)
    [Seg Dez 8 13:04:26 2014] iwlwifi 0000:01:00.0: loaded firmware version 23.10.10.0 op_mode iwlmvm
    [Seg Dez 8 13:04:26 2014] AVX2 version of gcm_enc/dec engaged.
    [Seg Dez 8 13:04:26 2014] random: nonblocking pool is initialized
    [Seg Dez 8 13:04:26 2014] usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
    [Seg Dez 8 13:04:26 2014] iwlwifi 0000:01:00.0: Detected Intel(R) Wireless N 7260, REV=0x144
    [Seg Dez 8 13:04:26 2014] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled
    [Seg Dez 8 13:04:26 2014] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled
    [Seg Dez 8 13:04:26 2014] iwlwifi 0000:01:00.0: Allocated 0x00400000 bytes (order 10) for firmware monitor.
    [Seg Dez 8 13:04:27 2014] EXT4-fs (sda4): mounting ext2 file system using the ext4 subsystem
    [Seg Dez 8 13:04:27 2014] EXT4-fs (sda4): mounted filesystem without journal. Opts: (null)
    [Seg Dez 8 13:04:27 2014] Adding 8500544k swap on /dev/sda8. Priority:-1 extents:1 across:8500544k SSFS
    [Seg Dez 8 13:04:27 2014] iTCO_vendor_support: vendor-support=0
    [Seg Dez 8 13:04:27 2014] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [Seg Dez 8 13:04:27 2014] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
    [Seg Dez 8 13:04:27 2014] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [Seg Dez 8 13:04:27 2014] intel_rapl: Found RAPL domain package
    [Seg Dez 8 13:04:27 2014] intel_rapl: Found RAPL domain core
    [Seg Dez 8 13:04:27 2014] intel_rapl: Found RAPL domain uncore
    [Seg Dez 8 13:04:27 2014] intel_rapl: Found RAPL domain dram
    [Seg Dez 8 13:04:27 2014] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered,discard
    [Seg Dez 8 13:04:27 2014] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: data=ordered,discard
    [Seg Dez 8 13:04:27 2014] usb 2-8: new high-speed USB device number 5 using xhci_hcd
    [Seg Dez 8 13:04:27 2014] systemd-journald[139]: Received request to flush runtime journal from PID 1
    [Seg Dez 8 13:04:27 2014] usbcore: registered new device driver usbip-host
    [Seg Dez 8 13:04:27 2014] usbip_host: USB/IP Host Driver v1.0.0
    [Seg Dez 8 13:04:27 2014] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
    [Seg Dez 8 13:04:27 2014] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
    [Seg Dez 8 13:04:27 2014] vboxdrv: Found 4 processor cores.
    [Seg Dez 8 13:04:27 2014] vboxdrv: fAsync=0 offMin=0xea offMax=0x156f
    [Seg Dez 8 13:04:27 2014] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [Seg Dez 8 13:04:27 2014] vboxdrv: Successfully loaded version 4.3.20_OSE (interface 0x001a0008).
    [Seg Dez 8 13:04:27 2014] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [Seg Dez 8 13:04:27 2014] Bluetooth: Core ver 2.19
    [Seg Dez 8 13:04:27 2014] NET: Registered protocol family 31
    [Seg Dez 8 13:04:27 2014] Bluetooth: HCI device and connection

  • Backup to remote stage failed due to RFC error

    Hello!
    Recently I have problem to execute a successful online Backup to the external source.
    If I start backup from DB13 and analyse the work processes (Tcode SM50) I found the following:
    The responsible BGD-WP:
    status: On hold , reason: RFC, report: SAPLSSXP
    The dev_w8 trace retrieves the following error:
      Source RSCROSS10  Line 112.
      Error Code <b>DBIF_RSQL_SQL_ERROR</b>.
      Module  $Id: //bas/700_REL/src/krn/runt/absapsql.c#6 $ SAP.
      Function HandleRsqlErrors Line 761.
    The DB13-protocol retrieves the following information:
    BR0278E Command output of 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkhbgq.ftp -b -c put E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 /sap/DEVB/bdwkhbgq/SR3.DATA3':
    Connected to 192.168.200.3 Port 21.
    220-FTP server ready. 220 This is a private system - No anonymous login 331 User sapbackup OK. Password required 230-User sapbackup has group access to:  administrator    230-This server supports FXP transfers 230-OK. Current restricted directory is / 230-************************************************ 230-* Use SITE command to change client codepage:  * 230-* ie, site codepage [client codepage]          * 230 ************************************************ 200 TYPE is now 8-bit binary 200 PORT command successful 150 Connecting to port 2734 NiWrite error: -6, bytes to send: 32767 bytes written: 0
    BR0280I BRBACKUP time stamp: 2007-10-20 03.08.23
    BR0279E Return code from 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkhbgq.ftp -b -c put E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 /sap/DEVB/bdwkhbgq/SR3.DATA3': 1
    BR0222E Copying E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 to/from /sap/DEVB/bdwkhbgq/SR3.DATA3 failed due to previous errors.
    Can some one help me with this issue?
    Thank you very much!
    regards
    Thom

    Hello Eric,
    unfortunately it is not possible to do it, because I have only remote access to the SAP system.
    Is it possible to analyse the problem with the log files?
    If yes --> which logs should I post here?
    I went through the monitors in RZ20 and found a lot of errors/warning:
    <b>Database:</b>
    DBIF_SETG_SQL_ERROR
    ORA-03106: fatal two-task communication protocol error
    DB error 24909 in FET
    SQL error 3106: WP in reconnect status
    <b>Background:</b>
    Job SAP_COLLECT_FOR_PERMONITOR terminated
    Utilisation:
    100% > 95% Background work process load exceeds threshold
    BackgroundService: SystemWideFree BPWP: 1 WPs > 2 WPs Current value over threshold value.
    Abap ErrorInUpdate
    <b>Syslog</b> : BasisSystem
    Operating system call recv failed (error no. & >E5)
    The log file dev_cp retrieves the following information after execution of DB Check:
    Trace file of control program (trace level 3)
    < Function: BtcTrcInit> Function: main SAPXPG 700
    2007-10-23--14-42-27 : Before BtcXpgDetach
    > Function: BtcXpgDetach < Function: BtcXpgDetach Accept RFC connection from R/3 system
    2007-10-23--14-42-27 : Before RfcAccept
    2007-10-23--14-42-27 : RfcAccept returned OK
    security check switched OFF
    Install RFC call SAPXPG_START_XPG
    Install RFC call SAPXPG_START_XPG_LONG
    Install RFC call SAPXPG_END_XPG
    Wait for RFC call SAPXPG_START_XPG or SAPXPG_START_XPG_LONG
    2007-10-23--14-42-27 : Before first call of RFCDispatch
    > Function: BtcXpgStartXpgLong
    2007-10-23--14-42-27 : Beginning of BtcXpgStartXpgLong
    > Function: BtcXpgStartXpgImportLong > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam
    Line Text
    <No StdOut/StdErr output reported>
    Target log table is not identical to source
    ItGetLine terminated with NULL
    <Function: BtcXpgItTransfer > Function: BtcTrcReset < Function: BtcTrcReset Call mode: VIA RF
    Input arguments of BtcXpgStartXpg:
    My WP settings are:
    rdsip/wp_no_dia = 6
    rdsip/wp_no_btc = 3
    rdsip/wp_no_vb = 1
    rdsip/wp_no_vb2 = 1
    rdsip/wp_no_spo = 1
    Thank you!
    Thom

Maybe you are looking for

  • PE9 Error Compiling Movie. Out of memory.

    I don't know what is going on when exporting.  I have my export settings set for PC: AVI.  It seems to do fine at first, but about 75%, I received an error message stating that the program had an error while compiling the movie because it was out of

  • New Organizational Unit Code

    Dear Folks, I want to create a new Organizational Unit code for a rollout project. For Example, the current company organization unit say 500000000 - Pepsi Corporation Limited and now I need to create a new company code and for that company code I ne

  • Displaying a Region on Column 2

    Hello All, I have a Jquery tab on one pf my pages. Under one tab, I need to add 2 sub regions, Region1's display point is Column1 & Region2's display point is Column2 How can I achieve this positioning ? I want the regions to be displayed beside each

  • HT4437 where the **** is the airplay icon on my ipad ????????

    where is the airplay icon on the ipad when I'm watching you tube videos ?

  • Long Term Planning

    Hi all, I am working on a Pharma project and they have asked about using LTP. I have looked at it before but not really used it. What is involved - Config, master data etc. My main concern is all the testing and documentation as this is in pharma and