0fi_Gl_4 see data in R/3 side

Hi ,
I want to check the data 0fi_Gl_4 in R/3 side. Because some documents are missing... So need to check it out that is available in 0fi_Gl_4 or not

Hi Naman,
Use the extract checker txn code -RSA3 to check the data on the R/3 side.
Hope this helps.
Regards,
Hima

Similar Messages

Delete Master Data - with or without sids

Hi
i am working on 0customer_attr
now when i right click and see master data it has 100 records
the same in r3 has 85 records.
so i thought i will try to delete master data and then load again.
so i right cick on 0customer and choose Delete master data.
now if i go back and see data for 0customer it still exists.
q1. what is the approach to delete and reload master data so between r3 and bw synchronization exists ???
q2. should i select with SIDS or without SIDS ???
how to rectify this error.
thank

Hi,
Q1..how can i find which transaction data is using those records ?
Doubleclick on the Master data IO. In the right pane you will find "Where-Used List" option. Click on that. It will give you the entire list of BW objects(DSO, Cube etc) in which your Master data IO is used.
q2. How can i delete transaction data
Right click on the Data targets(DSO, Cube etc) in which your master data IO is used, select the option Delete Data.
(or) Right click on the Data targets(DSO, Cube)>Manage>Select the Request-->Delete
q3. i dont see anything in psa,, it is master data so is that why there is no psa ??
Though it is a Master data, you should have loaded the data via DS so PSA will be there. It is possible that you might have deleted the PSA data.
Do one thing, delete all the Transactional Data(follow Q2 ans), then delete Master Data contents. Then do the loading again.
Hope it helps!
Regards,
Pavan

I can not see data in data viewer

Hi,
I use OWB 10g Relase 2. I have one table and I imported table metadata to OWB. I load data to table with pl/sql script, Now I do not see data in this table in data viewer. I see data in SQL*PLUS
I tried deploy table and run script to load again. Same problem.
I run mapping from this table. But target object is empty as well.
Thanks for advice
Jerry

my fail, I forgot commit transaction

Can't see data in Preview View

Note that I have posted this in the following thread:
Forum post in Suggestions and Comments: Where is the Tech Support for Crystal Reports Where is the Tech Support for Crystal Reports
Where is the technical support for Crystal Reports? I have just been through one of the worst technical supports circles in my entire career - this phone# to that phone# and only to be told you cannot talk to a Tech Support person. My dilema for anyone that can help - I am using Crystal Report 2008. I have mapped to a database in MS Access 2002. I copied the database to my desktop and created a test report. I can see the fields in the Field Explorer. I have dragged the fields onto the report and they are visible in Design View. I can see the data in the fields when I browse the fields. In the Preview View I do not see any data what-so-ever. I have not changed any defaults and have not suppressed or hidden information. The $1M question: Why can't I see the data on my report? I never had the problem when I used Crystal Reports v8.

The supported platforms document for CR2008 (R3) states that Access 2003 and above are supported but you should still be able to see data.
What happens if you go to the last page of your report (or scroll through the pages)? Do you still see no data? (I'm thinking maybe some null values in your data may be the reason for nothing showing on the first page.)
Connecting natively or ODBC?
Still have your sample data (xtreme.mdb) from CR8? See if you can hit that successfully.

Can't see data in data tab when there is a "." in table name

Hi,
I have a problem with SQL Developer 2.1 (this works with 1.5).
When there is a dot (".") in table name, we can't see data in data tab (we have no synonyms so it's not same bug).
If I try to export data on same table, in "WHERE" tab, I can see sample !
Any idea ?
Thanks

logged
Bug 9393866 - datatb shows no columns for table name containg [dot]
-Raghu

Can't see data in data tab - sql server 2005

hello,
i am connected to a sql server 2005 database (with jtds driver), the connection is ok, i see the tables but i can't see data in data tab.
i have an error : incorrect syntax
somebody can help me ?
thank's in advance
alex

definitely. I was going to say, make sure you have the privileges to read data.
From Microsoft SQL Server 2000 on, it is recommended that you are a member of the db_datareader - so that data in the database can be read
Barry

Not able to see data in Hyperion Planning data forms.

Hi ,
I created Hyperion planning EPMA application and loaded data in to it. But I am unable to see data in my data forms? Please give me solution for this?

Hi,
Here there are 2 things, once your epma heirarchy is ready did you deploy it against your planning App ? and incase if you haven't deployed your planning application, then old outline would be existing in Essbase and if you load data for old outline it will still take into but when you deploy the database gets restructured and older data gets restructured/removed.
Before going onto that level first check if your load data to essbase completed successfully. and did you load data for the combinations on dataform ? ? Try manually inputting a number through data form and submit and do a refresh to see if value comes up. ? Check your data form settings , if you have enables suppress missing rows/blocks.
Thanks
Amith

Not able to see data in Pivot table

Hi,
I have a issue with pivot table i have a column which displays values 0 and 1 and another column called month when i am placing this month column as a section and values column as a measure i am not seeing any values means i can see the month as header but instead showing 0 or 1 its showing blank columns. previously i created similar kind of table it worked but at that time values column data type is number this time its char. can anybody help me out how i can see the data in the pivot table. i already tried converting this column to number but still i am not able to see data in that values column.
Thanks

Hi copter,
Place the month column in rows and value column in measure section and check if results are coming.If still it doesnt come i suppose you dint apply aggregation rules to value column.In pivot view click values column and aggregate by /select min or max or either server complex and check your results.
(I suppose your aggregation rules is default)....Correct this one and you can place it in sections as per your requirement.
Cheers,
KK

Not able to see data in 0FIGL_V30 & 0FIGL_V31

Hi,
I've activated / installed standard business content for EpH3 i.e Mutltiprovider 0FIGL_M30 and entire data flow which includes reports and virtual providers 0FIGL_V30 & 0FIGL_V31.
I'm able to see data in cubes where above virtual providers read data from. here is the link from help.sap.com
http://help.sap.com/erp2005_ehp_03/helpdata/EN/6b/fdc62d9e0b444cb14b7f424d9f9cb7/frameset.htm
Issue is i'm not able to see data in Virtual providers 0FIGL_V30 & 0FIGL_V31 and hence in reports.
Can anyone advice please. thanks
SD

Hi All,
Yes I've checked data in underlying cubes.
Mulitprovider is fine.
I've added Master Data for both 0GL_ACCTP and 0ACCESSTP
RFC connection is fine.
No DTP & Transformation since this is Virtual Provider based on Functional Module.
However when I debug FM for 0FIGL_V30 & 0FIGL_V31 - I see no data and thought there might be master data issue b/w 0GL_ACCOUNT & 0GLACCEXT but MD is fine.
It just not pulling data.
Is there some setting I'm missing?
FM's used for Virtual Providers are
0FIGL_V30 - RS_BCT_FIGL_SREP_DATA_GET_V30
0FIGL_V31 - RS_BCT_FIGL_SREP_DATA_GET_V31
SD

Not able to see Data in Xcelsius 2008

Hi everyone,
My question is I am not able to see data in Xcelsius spreadsheet although I am able to connect to SAP BW and also able to see and select query but when I select Cross Tab Data in output Values it is not displaying in Xcelsius spreadsheet
System Info
Xcelsius 2008 Enterprise Trial Version SP 3.0
SAP BW 7.1 SP 6 ABAP and JAVA
Any help would be appreciated

Hi Rashid,
When you are using the BW conenction in Xcelsius you will not see any data in the spreadsheet at design time or at preview time.
To see the data you need to go SAP > Publish, then SAP > Launch to test the dashboard in the NetWeaver Portal as that is the only place where the data can be viewed.
Regards
Matt

How to see data in R/3

Hi
i am unable to see data in R/3. i don't have authorization of RSA3,RSO2,RSA5,RSA6.In my case data is coming through R/3 in BW and there is some problem with data in R/3 so i want to see data in R/3 to findout the problem. I have name of the datasource '2LIS_02_SCL' so is there anyway by which i can see data in R/3.

Amit,
If you dont have authorization for RSA3, then contact your administrator to get the authorizations or else if you have authorizations for either SE11 or SE16 then just check out the tables of that datasource and then you can find whether the data is available or not.
Hope it helps...
*****Assign Points*
Gattu

Restrict data in R/3 side

HI,
We have 6 years of historical data in R/3 side, from that we have to take 2 years of data. How to take the historical data for 2 years(
Thanks
Sudha

Hi Sudha,
You can go for a generic data source based on a function module, where you can write code for extracting data depending on the requirement. By doing this, you have two advantages...
1. In future if you need to do extraction for differen time periods you can use this.
2. You dont have to disturb the existing process.
***Assign Points if helpful ****
Rgds
Kalyan

OBIEE 10g - Unable to see data in the report view with grand total applied

Hi,
We're facing with a strange issue.
We're working on a report view.
We're able to see data when Grand total is not applied on the report. The moment Grand Total is applied, it's showing either an empty table with NULL values or "No Results" page.
Please help.
Thanks in advance.
-Rama

Hi Dpk,
Thanks for your reply.
I included it in the instanceconfig.xml, but the issue still exists.
Couple of Observations
#1 - We noticed this issue when we drill down to the level which has really sparse data.
It works fine when we look at the enterprise wide report.
#2 - Works fine with few dimensional attributes and facts on the report
When we add a fact that doesn't have any value at that level, the issue starts to appear.
Thanks in advance.
-Rama

Unable to see data in ST06.

Hi Gurus,
    I am facing an issue in my ECC system where in , i can't see data in ST06N -> Filesystems. All i can see is ZEROS.
    My SAPOSCOL is running.
   Can you guide how this can be resolved.
Thanks,
Sachin.

Hi,
Stop and restart the service again.Check the log files as per the below link and check if there is any error or any other useful information:
[http://help.sap.com/saphelp_nw04/helpdata/EN/c4/3a6c67505211d189550000e829fbbd/content.htm]
Regards,
Muralidhar

Unable to see data in the report or workbook

Hello All,
We are struggling to display data in the report level or workbook, however the data is available in Multiprovider.
Error Message: "No Applicable Data Found"
Steps Carried Out:
1. Dropped the BIA Indexes for relevant cubes and Reactivated the Multiprovider, still did not work.
2. When we checked for previous years like 2013, we are able to see data in the report. To elaborate an issue, we loaded budget data for year 2015 as requested by user. Restricted the same filters from the Query in the Multiprovider and able to see the data in the backend, however not data can be seen in the Report.
3. Three Hierarchies are restricted in the Filters of the Query.
It would be great, if any of you can help us to fix the issue.
Best Regards,
Sudhakar

Hi,
Have you used any exists?
in exists is there any system date kind?
Can you try to run your report thru RSRT and use debug option there.
before reporting please check your all connected targets have data for reporting.
mean at targets-->request tab, reporting symbol was there or not.
Any master data objects included in multi provider?
if yes then please check those, if any ACR was running then it may cause you.
if possible try to develop simple query with as per needs(mean to see 2015 data only).
As my guess selections/filters migth be hidden, please check those.
Thanks

0fi_Gl_4 see data in R/3 side

Similar Messages

Maybe you are looking for