0FI_GL_50 FLEX planning data

We have installed this extractor, but it fails to pass some account assignments to the PSA table in BW. For example, profit centre values in ECC are not being passed to BW as expected.
Is there any documentation, or particular guidelines on how this extractor should be implemented?
So far, I have simply installed the extractor in RSA5, replicated meta data in BW, and created an info package to load data to the PSA table.
The result is that all records are passed to the PSA table, except for profit centre and some other account assignments. What could be wrong ?
Regards,
Frederick

Thanks for your reply.
I can confirm that table FMGLFLEXP in ECC6 contains values for profit centre.
It can also be confirmed that RSA3 in ECC6 does not capture these values for profit centre (ie, the profit centre column is empty). For this reason, BW is unable to report profit centre for FI planning data.
How is it possible to audit the link between a table and RSA3?
Many thanks,
Frederick

Similar Messages

Syntax error when running GLPLUP - Flex Plan Upload

HI,
We want use transaction GLPLUP to perform a Flex Plan Upload, but encounter a syntax error in program RK50003 stating:
The following syntax error occurred in program "RK500003 " in include
"PP_FISL_GINC " in
line 652:
"The data object "ITDAT1" does not have a component called "XBILK"."
This program is a local object, and appears to be generated by SAP. Checking the program attributes the owner and the last person to change this program is a consultant who has rolled off the project, and is not available for help.
I suspect that there must be some steps to regenerate this code, but I am not certain where to look for this information.
I have tried running GLPLDEL and GLPLINSTALL, but this did not change RK500003.
Any insight you can provide on this is greatky appreciated.
Thanks,
Roy

HI,
I reported this issue with SAP and the following is what they had me do to resolve the issue:
1. Run transaction GLPLDEL:
Deletes all generated reports of the planning processor for
FI-GL/SL planning (application class GLU1). After a new call of
the planning, these reports will be generated once again.
2. Run transaction GLPLINSTALL:
It regenerates necessary database table entries for FI-G/SL Planning
(tables t8pl*). Make sure that you will perform this step when no
posting of FI-SL data is running.
This resolved the issue for us.
Good luck,
Roy

Backup scenarios for plan data : DTP to be used ?

Hi,
I have a planning cube to which i have a back up cube, which is a standard cube, and have a one to one transformation between both of them. My scenario is that i want to take a back up of the plan data into this standard cube. Initially i want to take 3 years of plan data and then i would take a weekly backup of the data.My requirement is that once i take a back up of the data, that particular data has to be deleted from the planning cube.

Hi,
you can do the following.
1. backup the data using a transformation
2. write a planning function/sequence which sets all keyfigures of the backup-ed data to zero (in your planning cube).
3. Compress the planning cube.
If you use the variables in the filter in step 1 and 2 this should be safe. If you want this can even be executed in one process chain.
Hope this helps
Regard Matthias Nutt

0vtype =20 (plan data) not populating to cube but present in psa

Hello Experts,
I have a requirement in BW 3.5 where in I need to create a report on multiprovider which should give the actual data,plan data and the difference between actual and plan data for some key figures.
The data flow is like this
There are two cubes one for actual and the other for plan ,I am able to get the actual data (10) for actual cube from R/3 .
But the problem is with plan cube,I am not able to get the plan data (20) to the plan cube (to the field 0vtype) ,but the data is coming till psa from R/3,there is no routine present in update rule also,but still data is not showing up for this 0vtype in plan cube...
I have tried loading selectively (020) by giving 020 as constant in the update rule..but still no luck
The datasource that is fetching plan data is 1_CO_PA_PLN1000.
Could you please suggest how to proceed further
Thanks,

HI Sashi,
Checking the mapping between the 0vtype and the source fiedls.
Check in transfer rules first if it is mapped or not.
Transfer rules are not mapped to source fields then correct it .
Hope this helps.
Regards,
Reddy

Regarding planning data not available in reports

HI SdN,
In my reports I'm populating actual data and planning data.But as of now we have only actual data display's in our report.what we are doing is we are populating data in BW and analysing on the base of the product cutomer (compounded) combination which is coming from r/3.(groups and sub-groups which we are entering at r/3 )
So our report shows us on the base of groups and sub groups which we are entering at r/3 level.That all is working fine but our customer wants that planning data is also displays in the reports as of now it is showing not assigned values in report.
so my question is ,To display planning data for group and sub groups provided by r/3 on the basis of product and customer (though other reports are showing planning data) , I know that I need to include this compounded infoobject in bps cubes but shall I also need to consider this in the BPS functions?I'm confused here and not sure about this.
And is that mandatory to have that componded infoobject mapped from underlying ods for customer.Because as of now planning cube is only updated with BPS functions?
Could you pls advice?
R

Hi Rubane
If the actuals and planning data are in seperate cubes then you will need to create a multi over both cubes to report on them together. However your BPS planning must be done against the same infoobject for you to be able to report on them together. If you are planning against the same IO the groupings from R3 will apply.
Also include the infoobject 0REQUID as a characteristic restriction and restrict it to variable 0S_RQMRC (Most Current Data)
Josh

After closing request plan data are not longer displayed

Hello all,
guess it's a standard problem but can't find a solution in the forum.
Scenario:
I created a planning cube and an aggregation level with two key figures, a workbook
based on the planning cube and a cube with actual data. The workbook showed the
the actual data and the so far entered plan data, so everything worked fine, but after closing the request
in the plan cube manually by switching to loading and back, the workbook doesn't show the plan data anymore.
Planning is not finished, so its necessary to see the already planned values.
Thanks
jg

Hi,
I think this is an inconsistency of the OLAP cache used in the plan buffer. Clear the cache of the plan buffer query via RSRT or RSR_CACHE. The plan buffer query has the following technical name
- IC/!!1IC if the input ready query is defined on an aggregation level on the InfoCube or on a multiprovder that contains an aggregation level as partprovider that is defined on InfoCube IC
- MPRO/!!1MPRO if the input ready query is defined on an aggregation level on the multiprovider MPRO
For a final solution earch for notes in the area of OLAP and OLAP cache in connection with planning.
Regards
Gregor

Problem with Exception Worksheet using Data from Supply Plan Data Table

I added a series for a flag that indicates whether product is sourced from multiple manufacturing sites for a given customer and item. The flag is on the supply plan data table because it depends on the scenario. I created an exception worksheet for when the flag is set but all combinations are being displayed. If the flag is not set for a given combo then "Selected Page Item has No Data" is displayed in place of the table. I want only the combinations that meet the exception to be shown. I tried setting up an exception worksheet for customer shipments which is also on the supply plan data table but saw the same issue with all combinations being displayed whether or not the condition is met. Does anyone know of any issues with using exception worksheets with the supply plan data table? I searched the documentation and saw that exceptions behave differently with promotion series but this isn't a promotion.
I'm using Demantra version 7.2. Thanks for any help!
Edited by: user9253208 on Mar 30, 2010 6:40 AM

Thanks. We have come up with a workaround. While the combinations on the left are not affected by the exception, the data in the main table is so we moved as many levels as possible into the table. The performance is slow but the data is more useful, especially when exported into Excel. I was hoping for a better solution but I guess we'll just have to stick with what we've come up with.

After 10gto11g upgd, 'Planning Data Pull Worker' perf is very slow

Hi all,
We upgraded database from 10g to 11gR2. We have 3 prod instances , they work together. They are ebiz, planning, and configurator. Some of you might be familiar with this kind of setup.
We are running 'Planning Data Pull Worker' in APS instance (planning) instance. This program "SELECTs" (and gets data) from EBIZ instance and "INSERTS" into planning instance.
But after upgrade, this works fine in one instance (PERF6) (half hr), and takes very long like 6+ hrs in another instacen ARCH6.
We figured where the problem is. A select statement.
"select count(1) from apps.MRP_AP3_SALES_ORDERS_V ;"
Eventhough this is not exactly the select been used. We simplified by just trying "count(1)" of the main view which as the culprit.
I am pasting trace of both instance where working fine (PERF6) and where it is taking too long (ARCH6).
Please have a look and help. We opened a sev-1 tar as well , still problem persists.
Thanks,
Gopal

=======================================
___PERF6 instance trace; Where it works fine._
=======================================
SQL> SELECT * FROM table(DBMS_XPLAN.DISPLAY_AWR(('87dtkqstb5adq'),'961766442',null,'ADVANCED'));
PLAN_TABLE_OUTPUT
SQL_ID 87dtkqstb5adq
select count(1) from apps.MRP_AP3_SALES_ORDERS_V
Plan hash value: 961766442
| Id | Operation | Name | Row
s | Bytes | Cost (%CPU)| Time |
PLAN_TABLE_OUTPUT
| 0 | SELECT STATEMENT | |
| | 29253 (100)| |
| 1 | SORT AGGREGATE | |
1 | 189 | | |
| 2 | NESTED LOOPS | |
PLAN_TABLE_OUTPUT
1 | 189 | 29253 (1)| 00:05:52 |
| 3 | HASH JOIN | |
1 | 185 | 29253 (1)| 00:05:52 |
| 4 | NESTED LOOPS OUTER | |
1 | 176 | 29246 (1)| 00:05:51 |
| 5 | NESTED LOOPS OUTER | |
1 | 170 | 29245 (1)| 00:05:51 |
PLAN_TABLE_OUTPUT
| 6 | NESTED LOOPS | |
1 | 161 | 29245 (1)| 00:05:51 |
| 7 | HASH JOIN | | 60
90 | 654K| 19090 (1)| 00:03:50 |
| 8 | TABLE ACCESS BY INDEX ROWID | FND_LANGUAGES |
20 | 100 | 2 (0)| 00:00:01 |
| 9 | INDEX RANGE SCAN | FND_LANGUAGES_N1 |
20 | | 1 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
| 10 | HASH JOIN | | 62
46 | 640K| 19088 (1)| 00:03:50 |
| 11 | TABLE ACCESS FULL | OE_TRANSACTION_TYPES_TL | 12
97 | 37613 | 10 (0)| 00:00:01 |
| 12 | NESTED LOOPS | |
| | | |
| 13 | NESTED LOOPS | | 41
PLAN_TABLE_OUTPUT
03 | 304K| 19077 (1)| 00:03:49 |
| 14 | NESTED LOOPS | | 41
03 | 220K| 14517 (1)| 00:02:55 |
| 15 | HASH JOIN | | 41
00 | 104K| 9959 (1)| 00:02:00 |
| 16 | TABLE ACCESS FULL | MRP_DERIVED_SO_DEMANDS | 41
00 | 65600 | 17 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
| 17 | INDEX FAST FULL SCAN | MTL_SYS_ITEMS_SN_N2 | 15
59K| 14M| 1184 (1)| 00:00:15 |
| 18 | TABLE ACCESS BY INDEX ROWID| OE_ORDER_LINES_ALL |
1 | 29 | 2 (0)| 00:00:01 |
| 19 | INDEX UNIQUE SCAN | OE_ORDER_LINES_U1 |
1 | | 1 (0)| 00:00:01 |
| 20 | INDEX UNIQUE SCAN | OE_ORDER_HEADERS_U1 |
1 | | 1 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
| 21 | TABLE ACCESS BY INDEX ROWID | OE_ORDER_HEADERS_ALL |
1 | 21 | 2 (0)| 00:00:01 |
| 22 | TABLE ACCESS BY INDEX ROWID | MTL_SALES_ORDERS |
1 | 51 | 3 (0)| 00:00:01 |
| 23 | INDEX RANGE SCAN | MTL_SALES_ORDERS_N1 |
1 | | 2 (0)| 00:00:01 |
| 24 | INDEX UNIQUE SCAN | PJM_PROJECT_PARAMETERS_U1 |
PLAN_TABLE_OUTPUT
1 | 9 | 0 (0)| |
| 25 | INDEX RANGE SCAN | OE_ODR_LINES_SN_N2 |
1 | 6 | 2 (0)| 00:00:01 |
| 26 | TABLE ACCESS FULL | AR_SYSTEM_PARAMETERS_ALL |
43 | 387 | 6 (0)| 00:00:01 |
| 27 | INDEX UNIQUE SCAN | GL_SETS_OF_BOOKS_U2 |
1 | 4 | 0 (0)| |
PLAN_TABLE_OUTPUT
Query Block Name / Object Alias (identified by operation id):
1 - SEL$15993197
8 - SEL$15993197 / FNL@SEL$2
9 - SEL$15993197 / FNL@SEL$2
11 - SEL$15993197 / OTTL@SEL$2
PLAN_TABLE_OUTPUT
16 - SEL$15993197 / MDSD@SEL$2
17 - SEL$15993197 / MSIK@SEL$2
18 - SEL$15993197 / OOL@SEL$2
19 - SEL$15993197 / OOL@SEL$2
20 - SEL$15993197 / OOHA@SEL$2
21 - SEL$15993197 / OOHA@SEL$2
22 - SEL$15993197 / MSO@SEL$2
23 - SEL$15993197 / MSO@SEL$2
24 - SEL$15993197 / MPP@SEL$2
25 - SEL$15993197 / OOL1@SEL$2
26 - SEL$15993197 / ASPA@SEL$2
PLAN_TABLE_OUTPUT
27 - SEL$15993197 / GSB@SEL$2
Outline Data
/*+
BEGIN_OUTLINE_DATA
IGNORE_OPTIM_EMBEDDED_HINTS
OPTIMIZER_FEATURES_ENABLE('11.2.0.2')
DB_VERSION('11.2.0.2')
OPT_PARAM('optimizer_dynamic_sampling' 6)
PLAN_TABLE_OUTPUT
ALL_ROWS
OUTLINE_LEAF(@"SEL$15993197")
ELIMINATE_JOIN(@"SEL$5C160134" "MTL_SALES_ORDERS"@"SEL$3")
OUTLINE(@"SEL$5C160134")
MERGE(@"SEL$335DD26A")
OUTLINE(@"SEL$1")
OUTLINE(@"SEL$335DD26A")
MERGE(@"SEL$3")
OUTLINE(@"SEL$2")
OUTLINE(@"SEL$3")
INDEX_FFS(@"SEL$15993197" "MSIK"@"SEL$2" ("MRP_SN_SYS_ITEMS"."INVENTORY_IT
PLAN_TABLE_OUTPUT
EM_ID"
"MRP_SN_SYS_ITEMS"."ORGANIZATION_ID"))
FULL(@"SEL$15993197" "MDSD"@"SEL$2")
INDEX_RS_ASC(@"SEL$15993197" "OOL"@"SEL$2" ("OE_ORDER_LINES_ALL"."LINE_ID"
INDEX(@"SEL$15993197" "OOHA"@"SEL$2" ("OE_ORDER_HEADERS_ALL"."HEADER_ID"))
FULL(@"SEL$15993197" "OTTL"@"SEL$2")
INDEX_RS_ASC(@"SEL$15993197" "FNL"@"SEL$2" ("FND_LANGUAGES"."INSTALLED_FLA
G"))
PLAN_TABLE_OUTPUT
INDEX_RS_ASC(@"SEL$15993197" "MSO"@"SEL$2" ("MTL_SALES_ORDERS"."SEGMENT1")
INDEX(@"SEL$15993197" "MPP"@"SEL$2" ("PJM_PROJECT_PARAMETERS"."PROJECT_ID"
"PJM_PROJECT_PARAMETERS"."ORGANIZATION_ID"))
INDEX(@"SEL$15993197" "OOL1"@"SEL$2" ("MRP_SN_ODR_LINES"."LINE_ID"))
FULL(@"SEL$15993197" "ASPA"@"SEL$2")
INDEX(@"SEL$15993197" "GSB"@"SEL$2" ("GL_SETS_OF_BOOKS"."SET_OF_BOOKS_ID")
PLAN_TABLE_OUTPUT
LEADING(@"SEL$15993197" "MSIK"@"SEL$2" "MDSD"@"SEL$2" "OOL"@"SEL$2" "OOHA"
@"SEL$2" "OTTL"@"SEL$2"
"FNL"@"SEL$2" "MSO"@"SEL$2" "MPP"@"SEL$2" "OOL1"@"SEL$2" "ASPA"@"S
EL$2" "GSB"@"SEL$2")
USE_HASH(@"SEL$15993197" "MDSD"@"SEL$2")
USE_NL(@"SEL$15993197" "OOL"@"SEL$2")
USE_NL(@"SEL$15993197" "OOHA"@"SEL$2")
PLAN_TABLE_OUTPUT
NLJ_BATCHING(@"SEL$15993197" "OOHA"@"SEL$2")
USE_HASH(@"SEL$15993197" "OTTL"@"SEL$2")
USE_HASH(@"SEL$15993197" "FNL"@"SEL$2")
USE_NL(@"SEL$15993197" "MSO"@"SEL$2")
USE_NL(@"SEL$15993197" "MPP"@"SEL$2")
USE_NL(@"SEL$15993197" "OOL1"@"SEL$2")
USE_HASH(@"SEL$15993197" "ASPA"@"SEL$2")
USE_NL(@"SEL$15993197" "GSB"@"SEL$2")
SWAP_JOIN_INPUTS(@"SEL$15993197" "MDSD"@"SEL$2")
SWAP_JOIN_INPUTS(@"SEL$15993197" "OTTL"@"SEL$2")
SWAP_JOIN_INPUTS(@"SEL$15993197" "FNL"@"SEL$2")
PLAN_TABLE_OUTPUT
END_OUTLINE_DATA
110 rows selected.
SQL> spool off

How Distinguish planning data and Actual data in a Planning cube

Hi,
I want to dispaly planning data & actaul data in a query how can i do it?
in my query it is showing all the requests it is not distinguishing.

Well use infoobject 0VTYPE for actual and plan differentiation
and 0VERSION to categorise which version of Plan data it is,typically you might have different planning versions .
Example
0VTYPE = 10 actual
0VTYPE = 20 plan
0VERSION = 001
0VERSION = 002
0VERSION = 003
Business decides which 0version value to be taken as final planning version once freezed.0VTYPE = 10 for actuals is always one ,it do not have 0VERSION to be taken in to account.
Hope it Helps
Chetan
@CP..

Data Source to upload plan data for CO_OM_CCA_: CC: Costs and Allocations

Hi Guru's,
We have Data source that which upload Actual data for CCA (0CO_OM_CCA_1 - Cost Centers:cost and allocations). Every time it is full upload before loading the data deletion of previous load request will be done.
One more information required that i have checked in the BW cube for plan data it is available in the info cube for one cost center and rest of the costcenter i don't have the data now the users are requesting to upload the plan data for rest of cost centers.
Now as per the business requirement the users are requesting to upload the plan data in to the same i am not sure whether it will pull the plan data with actuals in to BW cube. Is there any alternate with the same data source or else is there any specific data source for uploading Costs and Allocations plan data
Please suggest me how can i go a head with this requirement.
Thanks in Advance.
Ganni

You can use the same datasource to load plan/budget data to the cube for all the costcenters. And regarding the actuals, you can use 0CO_OM_CCA_9 datasource to load to actuals cube and create a multi on top of both plan and actuals cube for reporting purposes.

Data Collection -- Planning Data Pull process failed

Hello Experts,
I am having a problem with data collection, the result of Planning Data Pull was completed error. It seems the problem is on the Planning Data Pull Worker.
I am using 2 worker to run Planning Data Pull, and both result was errors. Below are some of the errors log:
16-MAY 19:11:34 : Procedure MSC_CL_SETUP_PULL.LOAD_CALENDAR_DATE started.
Into populate_rsrc_cal
16-MAY-2011 19:11:40
APS string is Invalid, check for Error condition
16-MAY 19:11:40 : Error in Routine GMP_CALENDAR_PKG.POPULATE_RSRC_CAL.
16-MAY 19:11:40 : User-Defined Exception
16-MAY 19:11:40 : User-Defined Exception
16-MAY 19:11:40 : Error_Stack...
16-MAY 19:11:40 : ORA-06510: PL/SQL: unhandled user-defined exception
16-MAY 19:11:40 : Error_Backtrace...
16-MAY 19:11:40 : ORA-06512: at "APPS.MSC_CL_PULL", line 6218
ORA-06512: at "APPS.MSC_CL_PULL", line 1583
Help me please.
Thanks & Regards,
Andi

This error shows up when it cannot find any organizations.
Use the sqls below to identify this
1. select MSC_CL_PULL.get_org_str(&instance_id) from dual ;
2. select instance_code, instance_id from msc.msc_apps_instances where instance_code='&instance_code'
3. select * from apps.msc_instance_orgs where sr_instance_id= &instanc_id
sql 1 should in principle return the orgs available. If this returns null or -9999, then it's an orgs problem
sql 3 will show the available orgs.
If the organizations are enabled for planning in the ASCP instances form, then run a targeted refresh for trading partners (suppliers/customers/orgs). If this works with no errors, then look at the table msc_trading_partners. It should contain records for the orgs with partner_type = 3

How to add a mm-dd-yyyy date field type in a Planning Data Form

Hi John,
pls, I have one question regarding the possibility of adding a date field type for example 03-03-2009 in a cell of Planning Data Form application.
for example, I created:
- 2 members in Period dimension: StartProject and EndProject and I need to enter and track date for these fields;
- one Account member called Project;
- and a simple form with these collumns and row;
Trying different settings for my members - seems that I cannot input date in the cell and rcvd errror: "you have entered invalid value".
Pls, can you confirm me if it's possible to enter date type in a form?
If yes, what is the specific setup for the Account and Period properties: Data storage, Time Balance, Data type, Account type etc
many thanks,
Robert

Many thanks John!!! that's it!!!
I had to change it in Data Type evaluation Order because I'm using EPMA and it's working now!!
Thanks again!!!
Rgds,
Robert

How to update flex field data on a human task?

After entering a human task and assigning the data how do you then update flex field data whilst the task is still assigned. I'm using the task services to communicate with the task and applying filters based on the flex field data.
I want to update the data when actions take place on the task e.g. suspend, aquire, release.
Any ideas?

You can fetch the task , change the flex attribute value and update the task. Find below the steps we do for updating one of the TextAttribute
Task completeTask = // get the task using task query service
completeTask.getSystemMessageAttributes().setTextAttribute2(updatedfolderName);
completeTask = // update the task using "updateTask" method

Creation of Billing Plan data

Hi all,
I am using [BAPI_SALESORDER_CREATEFROMDAT2] for creating Sales order
and i also have billing plans data to be updated in the sales order. But i dont find any structures for populating the Billing plan data into the BAPI.
But i found the SD_SALES_BILLINGPLAN_CHANGE function module for updating the Billing plan schedule data. But this function module needs [Billing plan number / invoicing plan number] assigned to the sales order from the table VBKD.
When i create the Sales order through BAPI, the [Billing plan number / invoicing plan number] is not getting updated and i dont know how to update the billing plan for the sales order created using BAPI.
Can anyone help out how to create the Billing plan data for a Sales order?
Regards
Dhanapal S

hi Dhanapal
i ahve the same problem which u posted..
My scenarion is to create billing plan while creation of order using the BAPI_SALESORDER_CREATEFROMDAT2 but could not find any structure to pass billing plan details
pls can u let me know if u found any solution for this if so can u send me detailed mail..
i want to populate in both way header level and item level (by removing check header plan in the billing plan tab)
Pls let me know ASAP..
Thanks
anil

Want to move the planning data to HFM

Any recommendations to move the Planning data to HFM.
Thanks in Advance....
Prasanna..

Turn on keyboard navigation in the Keyboard shortcuts of Keyboard and Mouse prefs and you can use the keyboard to navigate through the menus, folders, etc. However, there is no way to drag.
Set full keyboard access to "All Controls" and you can tab through all the buttons in the dialog boxes. Use spacebar to "click" the selected button.
In the Finder, Cmd+down arrow opens a file/folder. Cmd+Up arrow goes up in the hierarchy.
Combine this with the previous tip and you can have it all, mostly.
Also, without any of that, esc or cmd+. cancels, and cmd+first letter of button usually selects the button. That last one is application specific.

0FI_GL_50 FLEX planning data

Similar Messages

Maybe you are looking for