0fi_gl_6 - available local and group currency

Hi,
I have a problem with DataSource  0fi_gl_6. I need to consult accumulated balance in local
and group currency. I know in GLT0  this information is available.
In spite of this I could not see them when I load it in BW.
Can you help me?
Thanks.

Dear Ana, Dear Catherine
Maybe I come a bit late now, but I faced the same issue this afternoon.
Datasource 0FI_GL_6 is still in version 3.x. So it seems that you need to create two different Infopackages for the initialization of the delta, one selecting Currency Type 10 and one for Currency Type 30. The Delta-update infopackage will update the selection automatically once the system is initialized.
Maybe 1st check in RSA3 in the sourcesystem if the extractor gives any data for your selection. 2nd create the 2 Initialization Infopackages. Then 3rd open the infopackage, go to 'Scheduler' --> 'Initialization options for source systems' and delete the old entry for 0FI_GL_6. 4th go to RSA7 in the source system and verify if the entries are really gone; if they're not gone, delete them manually. Then run both infopackages. From now on, the delta update will update for both, Local and Group currency.
I hope this helps
Josef

Similar Messages

  • Hard currency is not valuated in FAGL_FC_VAL along with local and group currency

    Hi All,
    I have the below system settings for FOREX revaluation. The revaluation is not happening for Hard currency along with local and group currency. The test data and other settings seams to be fine as the below mentioned workaround works perfectly for hard currency revaluation.
    I would like to take your expert feedback on this issue to confirm whether this is how SAP works or its an issue with FAGL_FC_VAL program.
    System Settings:
    Currencies in company code
    local currency      group currency      hard currency
    10                             30                         40
    USD                          USD                    UYU
    FOREX settings:
    Work around found:
    Define two Valuation area, say
    1. Valuation Area: A1 which will have currency type 10 and 30.
    2. Valuation Area: A2 which will have only the currency type 40.
    3. Run FAGL_FC_VAL twice for these area.
    Issue with this work around:
    1. The valuation area is assigned to one accounting principle (which is in turn assigned to a specific ledger).
    2. Thus, if I have different accounting FOREX process to be followed in different ledgers (say IFRS ledger, Local Ledger, Tax ledger) then I need to create 2 valuation area (as per above workaround) for each ledgers and run FAGL_FC_VAL for each of these valuation areas.
    Thanks & Regards
    Nikhil Kothari

    Hi Experts,
    Any views on the above issue?
    Thanks & Regards
    Nikhil Kothari

  • Realized exchange rate difference in local and group currency

    Hi Friends,
    For a company code with local currency as Euro and group currency as USD, the setting in TR code OB22 for group currency is: Translation taking first local currency as a basis. When the open items are cleared, SAP posts difference in local currency and group currency. Sometimes, document currency is also group currency i.e. USD. The realized exchange difference is posted in Euro but it is not converted from Euro to group currency. Instead, system just calculates difference in group currency by comparing the value in group currency at the time of original transaction and when the transaction is cleared. Does anyone have dealt with such requirement and is there a way to be able to translate realized exchange differences from local to group currency?
    Thanks and regards,
    Pinky

    >Sometimes, document currency is also group currency i.e. USD.
    Can you explain, it's because of your settings or because of SAP?

  • Unable to clear GL due to Val difference between Local and group currency.

    hi,
    We have an open item managed Revaluation G/L account in our company code which has a local currency USD.There are some documents posted to this account in both USD and CAD. But when we analyze the docs posted in CAD we found a valuation difference in the local currency(USD) and the Group currency(again USD). I am not sure of the reason for this. But due to this difference we are unable to clear this account. Please let me know if anyone can think of how to clear this particular GL account.
    Rgds,
    Raj/
    Edited by: raj3875 on Oct 8, 2009 11:37 PM

    We have an issue even with document currency in USD. there is a valuation difference between Local currency (USD) and Group currency (USD).
    For example:
    Doc currency = 0 USD
    Local Currrency = 171,000 USD
    Group currency  = 0 USD
    Because of this I am not able to clear the account. Not sure why there is a difference inspite of the same currency. I try to clear it in F-04 but I get the below error:
    Posting is only possible with a zero balance; correct document
    Message no. F5060
    Regards,
    Raj

  • Currency Translation from local to group currency in AP /AR

    Hi Gurus,
             I have reporting requiremtents where in i need to show KF;s in local and group currency. I am using standard extractor AP_4 and AR_4. These extractors does not bring KF's in Group currency but only in local and document currency.
    Can anyone tell me what is the best way to go about carrying out the currency translation from local to glocal currency for AP and AR.
    Thanks in advance and yeah points guranteed for helpful answers...
    Cheers..
    Sam

    I take it you mean the extra currency in the company code config (ie group reporting)
    Just unhide the fields DMBE2 and HWAE2 from the extract structure and allocate a new infoobject to them - then add to eith your transformation or transfer rules/update rules and add to the cube

  • Vendor and Customer Hard and Group Currency balances

    Please let me know the table names of Vendor, Customer and GL balances for Hard and Group currencies (Ex KNC1 for Customer balance in Company Code Currency)
    Ramesh

    I don't think they are available.
    But if you have any requirement in the customization report, you can convert the values of KNC1 with TCURR table rates based on the posting date.
    Rgds
    Murali. N

  • Urgent : OBIA - Handling multiple Global, Local and Document Currencies

    All,
    I need input on how to configure multiple currency codes in DAC for OBIA 7.9.6.x
    My client's business goes around the the world and with multiple local currencies.They also need reporting currency to be multiple like in Euro, USD etc.
    I went through a couple of threads in this forum,like -
    Re: Configuring Global Currencies in BI Apps 7.9.6 for EBS 11.5.10 Source
    Re: How we are using Global, Local and Document Currencies  in DAC.
    But I have some confusion regarding the configuration of DAC's 3 Global currency codes.
    In order to fulfill my requirement - should I add additional codes in DAC?
    Basically How am I supposed to handle multiple Local,Document and Global currencies? And then possible changes in rpd/reports required also?
    Regards,
    Krish

    Currencies are discussed in the Setup and Configuration Guide here:
    7.1.1.2 How to Configure Global Currencies
    To configure the global currencies you want to report in your warehouse:
    In the DAC Client, display the Design view.
    For more information about logging into the DAC, see Section A.1, "How to Log Into the DAC Client".
    Select a container from the drop down list to the right of the Execute button.
    Display the 'Source System Parameters' tab.
    Locate the following parameters and set the currency code values for them in the 'Value' box:
    $$GLOBAL1_CURR_CODE (for the document currency).
    $$GLOBAL2_CURR_CODE (for the local currency).
    $$GLOBAL3_CURR_CODE (for the global currency).
    Make sure that you spell the currencies as they are spelled in your source OLTP system.
    Save your changes.
    As far as for PLP items, those are Post Load Processing elements that perform cleanup tasks after the Base Warehouse tables have been loaded. They should never be modified and frankly run without any issues provided the rest of the plan executes properly. Do you have a specific quesiton about a PLP?

  • How to report with local and global currency in Deliveries?

    Dear all,
    i am working on a delivery scenario where i have in the datasource NETWR(Net value
    ), WAERK (Document currency).
    I would like to be able to report with local currency and global currency.
    Could you please help by explaining how to proceed?
    Thank you.
    Cheers

    Hi Gilo,
    You have to check with the business on the following.
    1) What would be the key date of currency conversion? Is this any document date from the transaction ( Delivery Date ) or report execution date?
    2) What would be the target currency ? ( for local and Global currency ). Whether this can be determined at the time of loading or should it be based on user selection criteria?
    3) What is the exchange rate type that has to be used? ( for example 'M' ).
    Once you have the answers to these questions, you can decide whether to do the currency conversion in the backend or front end in the report during runtime.
    For example, if the user wants to input the target currency on selection variable and wants to use the exchage rate as of the report execution date, then this currency onversion has to be done at runtime.
    For more details,Please check help.sap.com or SDN
    Thanks,
    Krishnan

  • Where to enter Due Date and group currency amount in BAPI_ACC_DOCUMENT_POST

    Hi,
    I have some fields in a flat file . I need to post a document by F-04. Can anyone let me know where to enter the fields 'Due Date' and 'Group Currency Amount' for the line items?
    Thanks in advance..
    GC.

    Hi,
    I have some fields in a flat file . I need to post a document by F-04. Can anyone let me know where to enter the fields 'Due Date' and 'Group Currency Amount' for the line items?
    Thanks in advance..
    GC.

  • Fixed assets depreciation wherein local and system currency is differeent

    Hi,
    We just have a question regarding the Fixed Asset Depreciation if Local and System Currency is different.
    Setup of Currency:
    Local Currency = USD
    System Currency = Peso
    During monthly amortization the depreciation is in Local Currency (USD) converted amount at the time of acquisiton if other currency is used. The corresponding system amount which is in Peso will use the FOREX rate based on the posting date of the depreciation run.
    What we want is to maintain a correct lapsing schedule of Fixed Assets in both PHP & USD, and both following the accounting standard.   Therefore, to be in line w/ the standard, we have to use the historical rates.
    Is it possible that when the depreciation was posted in system currency the historical or the acquisition rates will be used not the conversion rate when the depreciation was done?
    Thanks,
    Janice

    Hi Janice,
    I don't think that is possible to maintain system consistency.  if you could assign FOREX arbitrarily, what is your accounting principle?
    Thanks,
    Gordon

  • Difference in Local currency and Group currency Balance

    Hi,
    I have a query where ...
    Company code has 2 currencies ;Group currency is USD and Document Currency is GBP
    This GL account is zero balance account . It has alredy set up in Document spitting customization setting
    Through FB03 normal view we can see the zero balance  but while displaying the document general ledger view with option of group currency  ; it is showing zero balance for the local currency and  balance amount  for group currency USDu2026
    Can I get any suggesion where should I need to check for this?
    Thanks in Advance

    Hiten,
    We are on ECC6.0. For us the problem is ongoing production orders.
    Based on SAP notes about excluding zero balance orders from settlement process, I tried to close such orders but system does not allow it as it sees the parallel currecy balance.
    Thanks,
    Sanjay Wagh

  • Depreciation posting Local currency 100 SGD and Group currency MYR 20000

    hi,
    i am posting depreciation for SG01(Singapore CC).System posts 100 SGD local currency and 20000 MYR  in Group currency. I maintain currecncy rates and I checked the rates are correct.Inspite of maintaining the rates correctly.sap posting 20000k as group currency.
    Sap should post 100 SGD and 300 Group currency.why system is posting the group currency as 20000.whether any config i am missing or anything i have to maintain.
    Any help is greatly appreciated.
    Thks
    cra

    Check translation ratios between SGD and MYR in TCURF table

  • Enhance 2LIS_03_UM to include Material Ledger and Group Currency

    Hi all,
      I have searching for a solution for this issue for almost a week now both in SDN and Service Marketplace but seems that there is very less informaton about it.
    Background:
       We are in the process of implementing the standard content for Inventory in BI and have followed all the steps necessary to initialize and load data.  Out data matches perfectly with reports such as MC.1 and MB5L however in the Revaluation datasource there is no provision to pickup other currency type for material price maintained in material ledger.
    I have been trying to find some User Exit/BADI either in the V1/V2 posting or during V3 collection run to pick the delta in standard price and Moving Average Price (MAP) for these difference currency types but without any success.
    We have total three valuations maintained in the ML (Material Ledger)
    10 - Local Currency (this is the only one provided in the standard content extractor)
    30 - Group Currency With Group Valuation
    31 - Group Currency with Legal valuation
    Even if I change the Group currency in MR21 the change is picked up by 2LIS_03_BF and with the field BWGEO blank. This is not surprising since this field is for Local currency only.
    I am sure that someone must have faced this issue before where material ledger is active, any help is appreciated.
    Thanks
    Raj

    Hi,
    Delta load extracts data from Delta Queue based on your update mode selected in LBWE.
    Full Load or Init load extracts data from Setup tables, here if you are extracting data from setup tables ? did you fill the setup tables now or not after deleting the existing data of the setup tables?
    are you getting same values when compare to R/3 and BW data for some document numbers?

  • How we are using Global, Local and Document Currencies  in DAC.

    Hi All,
    How we can configure Local,Global and Document currencies for GL Load.
    and where we can use these parameters in informatica.
    What does stand for PLP and what is logic behind PLP.
    Thanks in advance
    Thanks,
    Bhavik

    Currencies are discussed in the Setup and Configuration Guide here:
    7.1.1.2 How to Configure Global Currencies
    To configure the global currencies you want to report in your warehouse:
    In the DAC Client, display the Design view.
    For more information about logging into the DAC, see Section A.1, "How to Log Into the DAC Client".
    Select a container from the drop down list to the right of the Execute button.
    Display the 'Source System Parameters' tab.
    Locate the following parameters and set the currency code values for them in the 'Value' box:
    $$GLOBAL1_CURR_CODE (for the document currency).
    $$GLOBAL2_CURR_CODE (for the local currency).
    $$GLOBAL3_CURR_CODE (for the global currency).
    Make sure that you spell the currencies as they are spelled in your source OLTP system.
    Save your changes.
    As far as for PLP items, those are Post Load Processing elements that perform cleanup tasks after the Base Warehouse tables have been loaded. They should never be modified and frankly run without any issues provided the rest of the plan executes properly. Do you have a specific quesiton about a PLP?

  • What will happen if a maitain both standard available capacity and grouping key ( shift definition and shift sequence) in the capacity header of a work center?

    Hi all,
    Im little confused with the capacity header in work center. In the capacity header there is one place to give start time, end time, length of break and number of individual capacity. And in grouping key i can define the shift and shift sequence. So if im maintaining both of these ( standard avilable capacity and grouping key), which will be considered to calaculate avilable capacity?

    Hi
    If you are running three shifts ,please maintain the data as given belwo
    start :00:00:00
    End:23:59:59
    Break :03:00:00 ( 1 Hour per shift so 3 hrs for 3 shifts)
    No.of individual capacity :1
    System will understand that it is round the clock operation with total three hour brak and you will get 21 hour per capacity
    Hope this helps
    regards
    Prakash

Maybe you are looking for