0FIGL_C10 and its remote cube

Hi all,
I installed cube 0FIGL_C10 and it came with a remote cube. I would like to execute a query from the remote cube but i cannot seem to execute a query. how do i execute a query from the remote cube, and how does data come in a remote cube?
Thanks
Edited by: DANIEL GREEN on Apr 30, 2008 5:48 AM

Hi,
Refer for Queries and how to execute them
General Ledger (New): Balance Display
http://help.sap.com/saphelp_nw70/helpdata/EN/49/026940c3c7bf49e10000000a1550b0/frameset.htm
General Ledger (New): Balances Cumulated, Comparison with Previous Year
http://help.sap.com/saphelp_nw70/helpdata/EN/4a/ed6840b151181ce10000000a1550b0/frameset.htm
General Ledger (New): Balances Cumulated, Comparison with Previous Year, REMOTE
http://help.sap.com/saphelp_nw70/helpdata/EN/d8/ef6840b151181ce10000000a1550b0/frameset.htm
General Ledger (New): Balance Display, Remote
http://help.sap.com/saphelp_nw70/helpdata/EN/fd/ed6840b151181ce10000000a1550b0/frameset.htm
For General Ledger (New): Balances Cumulated, Comparison with Previous Year it says that When you call up the query, you must enter the posting period until which the cumulated account balances are to be displayed for the specified posting period and the previous posting periods of the selected fiscal year.
Hope this helps.
Thanks,
JituK

Similar Messages

Non cumulative remote cube in Multiprovider

Hi all,
I have a situation. We created a multiprovider containing 1 infocube and 1 remote cube. The remote cube contains non cumulative key figure. When we create a query on the multiprovider and check the query, the system gives us a system error message saying "System error in program CL_RSR and form GET_CHANMID-01-". I have tried to find an OSS note, but could find any related notes.
The problem doesn't occur if the query built on the remote cube or on the multiprovider but without the remote cube. So I think the problem lies on using non cumulative remote cube in a multiprovider.
Has anyone encounter such a situation? Appreciate any opinion or comments.
Thank you.
Regards,
Anzar

Anyone?
I really need your advice on this issue.
Best regards,
David

Data flow not visible while creating remote cube.

Hi SDN,
I am working on a remote cube. I need to link the infosource to remote cube. I have selected the source system and assigned.
I have done, like--Remote cube --> Context Menu --> Show Data flow , and I wanted to see the source system , Info source and the remote cube, but could not find them .
Guide me what I've missed /went wrong.
Thanks in Advance
Ankit

Hi,
Remote cube is technology where you report on data which is stored in the source system. While creating the Infocube you have to select Remote Infocube Radiobutton and in the next screen it will ask you for the infosource.
In that infosource you can assign the datasource in the infosource menu.
Now you see the data flow.
Hope it works,
Regards,
Sasi

I lost my iphone4 yesterday..i have find my iphone apps in there and its updated to IOS 5. i wonder if they would be able to still access my accounts in there after i remote locked it.? its offline whenever i checked till now..

i lost my iphone4 yesterday..i have find my iphone apps in there and its updated to IOS 5. i wonder if they would be able to still access my accounts in there after i remote locked it.? its offline whenever i checked till now.. im wonderin if ist safe coz all my emails are there and all personal info..i hope someone could answer me..i reported to the police the ist step..coz when it happened ..policemen are there..then i went to the nearest MAC center and tried to track it..but its offline..so they asked me if i want to remote lock it..then i did...which i think the mcreason why i cant track my phone beacause its locked?? or not until they connect to wifi or 3g but its unabling them because i locked it..?

but when i do remote wipe ..it will erase everything in there and i cant track down the phone anyomore?

Deleting DTP based on Open Hub and Remote Cube

Hi All,
i have created a DTP delta for my Open Hub to load a flat file from a remote cube.
i have done some load test request but it doesn't work (no data in my file .csv), i have created another full DTP with others parameters and it works successfully.
now i want to delete my Delta DTP but the system return me a message like this:
DTP_4IDT4BXV29E1N0MWINKCWO60B cannot be deleted at the moment (see long text)
and in the long text i have:
Message no. RSBK037
Diagnosis
You want to delete a delta DTP that has been successfully used to load requests from the source into the target. If you delete the DTP, you will also delete the information on the source data that was successfully transferred. As a result the source data would be transferred again, if you create a new delta DTP that links the same source with the same target.
System Response
The system terminated the delete operation.
Procedure
You have two options:
1. Delete all the requests loaded with this DTP from the target and then delete the DTP.
2. Do not delete the DTP and continue to load deltas using this DTP.
i tried to see the requests loaded with the delta dtp and i have deleted one but there are another requests that i can't deleted.
i have deleted the delta dtp from my transport request.
how should i do to delete definitivily my delta dtp?
thanks for your help
Bilal

Do not delete entries out of table RSBKREQUEST.
To delete your DTP, you may use program RSBKDTPDELETE. Give the technical id of the DTP as the input parameter.

I want to buy an Apple TV device but I need to be sure of its benefits. I have contracted a Satellite TV. Is it true that if I connect Apple TV to system, I can watch TV through IPad wherever by using wireless and App Remote

I want to buy an Apple TV device but I need to be sure of its benefits. I have contracted a Satellite TV. Is it true that if I connect Apple TV to system, I can watch TV in my IPad wherever by using wireless and App Remote??

If you have an iPad 2 you can wirelessly mirror it to your TV via the ATV device. If you have an iPad 1 then you can use airplay but not all apps are enabled to push video, as the developer needs to do this.
You can also view all local content from iTunes or your iPad, pushed via airplay/home-sharing.
The other services available are iTunes movie rentals, TV shows (past purchases viewable from the cloud), Photo Stream, Netflix, Vimeo, Podcasts, Youtube, Sports etc.
More info
http://www.apple.com/appletv/

First generation apple tv has lost its main menu bar on top of screen. Also I am currently in language choice and my remote seems to be locked, is that possible and if so how do you unlock it?

first generation apple tv has lost its main menu bar on top of screen. Also I am currently in language choice and my remote seems to be locked, is that possible and if so how do you unlock it?

You would need to go to an Apple Store (make an appointment) and take the phone, her father's original invoice when the phone was purchased, and a copy of his death certificate. Only with these will Apple unlock it. If you can't get these, the phone is permanently unusable.

Difference between General remote cube and virtual infoprovide with service

Hi guys,
I could not understand the difference between general remote cube and virtual infoprovider technically. And I could not find the document about how to set general remote cube.
I only find the following sources.
http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c0234239f75733e10000000a155106/frameset.htm
"In comparison to other VirtualProviders, this VirtualProvider is more generic. It offers more flexibility, but also requires a higher implementation effort.".
I am welcome your lecture. Especially I would like to know how to set general remote cube..
Kind regards,
Masaaki

Hi,
You better take a look on the link:
http://help.sap.com/saphelp_nw04/helpdata/en/8d/2b4e3cb7f4d83ee10000000a114084/frameset.htm
Remote cube uses BAPI
SAP remote cube uses the BW Service API functions of SAP system
In Virtual cube with services, The data source is a user-defined function module.
with rgds,
Anil Kumar Sharma .P

Remote Cubes and Inversion Routine

Hi,
I have a RemoteCube and in one of the transfer rules of it's infosource i need to code an Inversion Routine. I have a few questions:
1) Do inversion routines get executed when a query is run against a remote cube?
2) How do i debug an inversion routine? I want to debug it durign a query run. I tried going to the generated extraction program, placed a break point in my inversion routine and tried executing my query in RSRT and clicked execute+debug. However, it doesn't seem to stop at my breakpoint. Am i missing something?

Hi,
When you Execute+Debug in RSRT, you should be thrown with another screen for "Debug Options", did you choose/select "RRI Transformations". Try this option, it might stop at the set breakpoint in your inversion routine.
Another way would be, before you Press "ExecuteDebug" type "/h" to activate Debug on your current Screen, then press "ExecuteDebug". Then you can use the Menu in your Debug Screen...
Breakpoints -> Breakpoints at ->
then choose one of the following ->
statement
routine
function module
method
exception
system exception
This should help, also refer to the following link
http://help.sap.com/saphelp_erp2004/helpdata/en/e6/f404475a758547b05bf8f86894b150/frameset.htm
Regards,
Praveen.

Error while assigning source system to SAP Remote cube

I need to do a query using remote cube and the source sys is flat file.
it wont let me assign the source system to the remote cube.
the r/3 system icon is seen next to the remote cube technical name...
I can't see my flatfile source system
can somebody help me.

Hello Kiran,
I don't think its possible to use Remote cubes for PC_FILE or FLAT FILE as Source system.
You can use Virtual Providers in these different scenarios
Virtual Providers based on DTP => used for SAP source systems
Virtual Providers based on BAPI => used for non-SAP or external systems
Virtual Providers bsaed on Function modules => You use this VirtualProvider if you want to display data from non-BI data sources in BI without having to copy the dataset into the BI structures. The data can be local or remote. You can also use your own calculations to change the data before it is passed to the OLAP processor. This function is used primarily in the SAP Strategic Enterprise Management (SEM) application.
Use InfoObects as Virtual Providers
Your case is none of these.
More details can be found under this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/84/497e4ec079584ca36b8edba0ea9495/frameset.htm

CUCM 10 Barge/CBarge with shared line between phone and a remote device

Is it possible to configure CBARGE/BARGE feature if shared line is between a cisco phone and a remote device.
When remote device picks up the phone, red light comes up on the phone, if we press the line button to Cbarge, dial tone comes up and the call does not go into a conference.
Has anyone used that feature? Can it be configured?

We are using Lync for tesing purposes.
we tried scenario with Remote device as a mobile phone. Where calls are being sent through SIP trunk to CUBE and then to our provider. Maybe I should add some commands on CUBE router?
Is that feature (CBARGE) designed to work in that scenario when shared line is answered via remote device on CUCM 10.5.1.10000-7. I am suspecting that its not designed to work that way (If its designed to work that way, we will continue on with collecting traces, etc).

Using Remote cubes with IP

Dear Experts,
Is it possible to integrate a remote cube in a multiprovider a long with a realtime cube?, where the remote cube is used to read reference data during a planning function execution and the results are written into the realtime cube.
Regards,
Eitan.
Edited by: Eitan Ohayon on Nov 2, 2008 12:46 PM

Hi,
The performance of the planning mainly depends on the selection conditions specified in the filters. Try to keep it as restricted as possible to fetch minimum records. The lesser the number of records, the better the performance would be. Try to work not on multiproviders if possible. Try to use simple infoproviders with single cube as much as possible to improve the performance. If its non-avoidable situation, then you need to go for multiproviders.
Please award points if helpful.

Steps for creating a SAP Remote cube.

Hello Experts,
Can you anyone list the steps for creating a SAP Remote cube please?
Any step by step guide will be of really great help.
Thanks in advance.
Regards,
Kumar.

Creating VirtualProviders Based on Data Transfer Processes Locate the document in its SAP Library structure
Prerequisites
If you are using a DataSource as the source for a VirtualProvider, you have to allow direct access to this DataSource.
Procedure:
       1.      In the Data Warehousing Workbench under Modeling, choose the InfoProvider tree.
       2.      In the context menu, choose Create VirtualProvider.
       3.      As the type, select VirtualProvider based on data transfer process for direct access.
In terms of compatibility, a VirtualProvider that is based on a data transfer process with direct access can also be connected to an SAP source system using a 3.x InfoSource.
The Unique Source System Assignment indicator controls whether this source system assignment needs to be unique. If the indicator is set, you can select a maximum of one source system in the assignment dialog. If the indicator is not set, you can select multiple source systems. In this case, the VirtualProvider acts like a MultiProvider.
If the indicator is not set, characteristic 0LOGSYS is automatically added to the VirtualProvider when it is created. In the query, this characteristic allows you to select the source system dynamically: In each navigation step, the system only requests data from the assigned source systems whose logical system name fulfills the selection condition for characteristic 0LOGSYS.
       4.      Define the VirtualProvider by transferring the required InfoObjects. Activate the VirtualProvider.
       5.      In the context menu of the VirtualProvider, select Create Transformation. Define the transformation rules and activate them.
       6.      In the context menu of the VirtualProvider, select Create Data Transfer Process. DTP for Direct Access is the default value for the DTP type. Select the source for the VirtualProvider. Activate the data transfer process. See Structure linkCreating Data Transfer Process for Direct Accesss.
       7.      Activate direct access. In the context menu of the VirtualProvider, select Activate Direct Access. In the dialog box that appears, choose one or more data transfer processes and select This graphic is explained in the accompanying text Save Assignments.
Check this for little extra info:
/thread/142088 [original link is broken]

Report is not getting data from Remote cube thru Multi Provider

Hi SAPians
I ve strucked up with a Problem in The Reconciliation Report in BW3.5
The Report was built on a Multi Provider, which was created on Basic and Remote Cubes .
Both cubes have same Data Source and all the Objects were in Active version and found good.
When I m executing the Report ,I m only getting the data from the Basic cube and no data is coming from Remote Cube.
I ve checked the char " 0Infoprov " in Multi Provider and It was assigned with the both the cubes.
What might be the problem
Please help me in this regard
Thanks in advance
Regards
Arjun

Hi
In the Reconciliation multiprovider, include 0INFOPROVIDER = Remote cube.
If data still not coming, you can be sure connectivity with Source system of the Remote cube is the issue
Check with basis to solve the connectivity issue.
Ensure Remote cube is consistent
Bye

Effects of R3 DS enhancement on remote cube

Hi All,
Is there a direct effect while running queries against a remote cube when its underlying R3 DS has been enhanced?
An example is, I'm running queries on a remote cube copied from OL_PCA_1. Now I enhanced R3 DS 0EC_PCA_1_9 (which feeds IS 0EC_PCA_1, which in turn in the basis of my remote cube). I did not include the new characteristics in the remote cube itself, but rather included it in the enhanced standard OL_PCA_1 where more granular reporting will be performed.
Will there be query performance effects on the remote cube using this approach? How can I measure the performance impact (if any) on the remote cube's queries?
Thanks.

Hi All,
Is there a direct effect while running queries against a remote cube when its underlying R3 DS has been enhanced?
An example is, I'm running queries on a remote cube copied from OL_PCA_1. Now I enhanced R3 DS 0EC_PCA_1_9 (which feeds IS 0EC_PCA_1, which in turn in the basis of my remote cube). I did not include the new characteristics in the remote cube itself, but rather included it in the enhanced standard OL_PCA_1 where more granular reporting will be performed.
Will there be query performance effects on the remote cube using this approach? How can I measure the performance impact (if any) on the remote cube's queries?
Thanks.

0FIGL_C10 and its remote cube

Similar Messages

Maybe you are looking for