0FIGL_O02 DSO not activating

Hi,
I'm loading data into the 0FIGL_O02 DSO. I'm using an Initialization infopackage. The QM status in the monitor for the infopackage is green and I can see the data in the PSA.
When I try to activate the DSO the QM status under DSO>Manage goes red but the Request for Reporting flag is set. In the contents tab of the DSO I can only see the New Data and not the Active Data.
I've tried to set the "Activate Datastore Object Data" flag under DSO>Manage> Environment> Automatic Request Processing but that doesn't work either.
Under RSODSO_SETTINGS I've increased the activation time from 600 secs to 3000 secs but still don't get anything.
Can anyone give me some suggestions as to what the problem is?
thanks
Michalis

There is no standar info Cube for the data source FI_GL_4,on that you will get the information on detail Document level in that ODS, if you want any Cube you have to create the Cube based on that ODS using your own Dimensions.
Edited by: prashanthk on Oct 12, 2010 3:10 PM

Similar Messages

DSO request not activating

Hi Experts
I have one request in DSO in my Development system whose request is not activating, not even giving any message. I tried with delete and reload but not working. please suggest some ideas.

Hi,
Please check out the below links.
DataStore built incorrectly; cannot update request REQU_*
"DataStore XXXX built incorrectly; cannot update the request" After changi
Try to diagnose more on same.
Hope it helps.
Regards,
AL

Dso is not activated

hi guys,
iam new to BI7 i try to creat a new dso but it is giving message that not activated
the message is
Message no. R7I028
can u give what it is?
no need to say that good ans get good pts also
thanks
ravi

I have received this error when trying to activate a DSO or InfoCube, when that InfoProvider includes a navigational attribute that has been removed from its parent InfoObject. I'm trying to figure out ways to correct the error, but so far the only way I can find is to add the attribute back into the parent InfoObject, then remove the attribute from the InfoProvider and activate the InfoProvider. You can then remove the attribute from the parent InfoObject again if desired.

Request Status not Activating

Dear All,
I have created Datasource and DSO and flat file and also created DTP. If i request perticular request id , its not activating. request status not activating.
With Regards,
Baskaran.

Hi Baskaran,
Follow these steps.
Do the loading process as you are doing i.e. using Info package load to PSA, then using DTP to DSO.
Then after loading data, you go to manage. Then Select your green request and then click activate.
A new window will open. There your request will be green. Again select it and click on start (do not click on stop).
Then you will find refresh button there. Click on it. Your green request will turn yellow. Now go on clicking refresh until your request disappears from there. After that close the window.
Then again click on manage. Click on refresh. Now select active data. Your data will be displayed.
Hope this helps.
thanks,
rahul

Error "Personalization not activated." when trying to set personal

Hi Everyone,
Was wondering if anyone has encountered this situation.
I have a crystal report reporting off of sap bw using bw mdx driver which I view through an iview in SAP portal. When I select the parameter values for a parameter using the picklist, I try to personalize it and I get "Personalization not activated."
I find that some parameters I am able to personalize, but when I try to view the report again the settings are not kept.
Is there something I'm doing wrong?
Thanks,
Daniel

Hi Ingo,
Thanks for the hint, We enabled personalization, but we encountered another issue. It seems that the value that gets stored is invalid.
i.e.
I select the value for cost centre.
The value of the cost centre is [0COSTCENTER].[BTT10000011003] - Accounting
The value that gets stored for personalization is 0BTT1/11003. I confirmed in the DSO as well that this was the value stored. When I try to run the report using the personalized values I get an database connector error.
Running the query in rsrt we get the following error Value "0BTT1/11003" for variable "Cost Centre" is invalid.
Any ideas?

DSO data Activation Time out-DATABASE ERROR-440

Hello all,
We are getting error in one of our standard DSO during activation -Error-Process 000001 did not confirm within the permitted time period,we repeated process chain ,we got the same error,we activated manually -we got the same error, I need to mention that we only have 3278 records which should not take more than few seconds-minutes to activate. we reset RSODSO_SETTINGS wait time by increasing still did do it , we changed data package 10,000 ,50,000 but it didn't correct the error, we even change DSO SID generation setting during activation to never create SID ,it didn't correct the error, we reactivated DSO,we indexed the table both new and active table but we are getting the same error, in a SM21 we are getting error DATABASE ERROR -440 [IBM][CLI Driver][DB2] NO AUTHORIZED PROCEDURE NAMED > DSO_VERSION HAVING COMPATIBLE ARGUMENTS WAS FOUND... DBA reorg and did some other things but we are still getting the same error and the are not sure what the procedure DSO_VERSION is ,Any body have any idea what that procedure is and why we are getting that in sm21 during one DSO data activation? Has anybody had this kind of experience before? by the way we have researched on google SCN and nothing close to our scenario. By the way we ran the activation with the different settings both in dialog and background.We also got error Background process BCTL_4Z81MSY8311QNTKRYGRDYVFXY terminated due to missing confirmation ...Any suggestions will be of great help and points will be awarded....
Thank you.

Error in Sm21-
04:57:20 BTC 036 810 PRGRAU0                   BY 2 Database error -440 at EXE
04:57:20 BTC 036 810 PRGRAU0                   BY 0 > [IBM][CLI Driver][DB2] NO AUTHORIZED PROCEDURE NAME
04:57:20 BTC 036 810 PRGRAU0                   BY 0 > DSO_VERSION HAVING COMPATIBLE ARGUMENTS WAS FOUND
04:57:20 BTC 036 810 PRGRAU0                   BY 1 Database error -440
Background process BCTL_4Z9BTOI3XPN2XB0VL9IUZ08ZA terminated due to missing
confirmation
Message no. RSODSO_PROCESSING041
Diagnosis
The confirmation from the background process BCTL_4Z9BTOI3XPN2XB0VL9IUZ08ZA
did not occur within the set time. It was thus ended by the system.
System Response
Background process: BCTL_4Z9BTOI3XPN2XB0VL9IUZ08ZA
Number: 1
Procedure
Check the package size for the application to be processed or change the
package size.

Delta extraction for dunning history is not active

Hi all,
I am loading data to the FI Cube (Financial A/c -> Contract a/c receivables ) Dunning header .
This is a Standard infocube. This cube contains two DSOu2019S 0FC_DS08 , 0FC_DS11. When I starting the data loading from the DSO ( 0FC_DS08 ), I create the INIT package . When creating itself it throwing the error u201C Delta extraction for dunning history is not active u201D
When I check on SDN SAP , ( Use Tcode sbiw. Select 'Settings for apllication-specific datasources (PI) ->Contract Aacounts Receivable -> Make Central Settings'. Then tick 'Delta Extraction for Dunning Items Active'.) I got this link. But I could not proceed this link. Can you explain detailed step by step how to proceed to solve this issue.
Regards,
Baskaran.

Hello Baskaran,
Did you ever solve this issue?
We do not have the link in SBIW (ERP 6.0 EHP6).
Thanks,
Andreas

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs?

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs? My apple ID is my Yahoo mail it self, but not able to log in to Icloud, Can any body guide, Why, I can not.

Hi dip_kinu,
I apologize, I'm a bit unclear on exactly what device you are trying to set up and what is happening when you try to do so. If you are having issues remembering your Apple ID, or feel like you may have set up multiple Apple ID's, you may find the following page helpful:
Apple - My Apple ID: Find your Apple ID
https://iforgot.apple.com/appleid
Regards,
- Brenden

In Adobe Bridge when I try to open my camera raws, I get a pop up box stating "Bridges parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature" What do I do? Please advise

In Adobe Bridge, when I try to open my camera raws, I get a pop up stating"Bridges parent application is not active. Bridge requires that a qualifying product has been launced at least once to enable this feature." What the heck? I have a PC and haven't had problems before.. I have adobe cloud and pay my monthly bill...

Have you opened Photoshop or any other Adobe app that Bridge works with? You need to do this if you've upgraded PS or just signed up for CC.

Error: "Component is not active" but component is active

Hi Experts,
I transported a Web Dynpro application from source system to target system. When starting the application via browser I'm getting this error message:
"Component XXX_BDB is not active"
But the component is active in source and in target system. When I try to activate the component in target system there comes this error:
Component XXX_BDB can't be generated because of errors: see long text.
(Message no. SWDP_WB_TOOL100)
According to the long text, there is a heavy error and I should check the component in order to eliminate the errors. Checking the syntax is OK and strangely, the component controller is also active. But when I want to start WebDynpro-Component, the error message "Component is not active" is displayed.
I have checked this thread [Problems when activating ComponentController |Problems when activating ComponentController; without any effect....
Does someone have any ideas?
Thanks in advance,
Tan

Hi Thomas,
where can I check the generation load limit?
I've done an extended syntax check (in source system, is that okay or should I do the check on both systems?), there are some errors regarding strings, field properties and structure extensions and some warnings regarding field properties.
But this errors are on an other wd component as well, but this other component is running, so I'm not sure if these errors are crucial. However I'm going to fix the errors now.
Baskaran, I will check the component controller and component usage as well but how can I identify the errors or should I just check it in general?
And what about the fact that both applications are running on the source system?
Additional info: the source system is ECC 6.0, the target system is Solution Manager 7.0
Thanks
Edited by: Tan Yildiz on May 4, 2011 9:26 AM

Transfer structure not active

Hi ,
in my process chain , it failed due to error: Transfer structure is not active.
How to correc this?
iam using BI 7.0
regards
sidartha

Hi Siddartha,
Try to activate the transfer structure using Pogram RS_TRANSTRU_ACTIVATE_ALL in SE 38. Give the Infosource & Source system name there & then execute.
Hope this will help.
~!Dpak

Transfer structure not active after runing RS_TRANSTRU_ACTIVATE_ALL

Hi BW Experts,
we are having a migration and just after migration we are finding the the transfer structure is not active. Hence in order to activate the same we ran <b>RS_TRANSTRU_ACTIVATE_ALL</b> program but still in the job log finding some problems like <b>0BP_RELTYPES_TEXT</b> is not available in source system. Kindly help in this regard since this is a critical issue and we are not able to run our daily loads because of this.
Can any one also tell me if it is a migration problem?
Thanks and have a nice day.
Warm Regards,
Akilesh

Hi Sriram,
This is the First time ur loading data from that system, If yes u need to do full extraction steps like transfer data source in RSA5 ..etc.
After that u need to replicate those DS from their respective sources systems in BW.
After doing those all actions, then u need to run the program 'RS_TRANSTRU_ACTIVATE_ALL'.
If u have multiple TS to be activated from one source system ---> u can enter Source system name and put * in Info source column after executing the program, it will activate all transfer structures which are linked to that source system at a time.
Hope this will help...if you have any plz reply.
Thanks
Raja Reddy.

Material ledger is not active in valuation area C002

Dear All,
I have a Scheduling Agreement for a material 'A' with Vendor 'V' with diff prices with validity dates, I did the GR & when i am posting the invoice thro' miro, system is throwing error as above Material ledger is not active in valuation area C002 Why should I activate the material ledger here ? Pls suggest how can i solve this ?
regds,
Kallu

Hi
For a Particular material, Material Ledger is active or not? Can be checked in Accountig view of Material Master.
Why we need Material Ledger?
A fundamental task of the material ledger is carrying inventories in multiple currencies and/or
valuations.
Material inventory values are normally carried by the SAP system in one currency. The material
ledger component enables the R/3 System to carry inventory values in two additional
currencies/valuations. Therefore, all goods movements in the material ledger are performed in up
to 3 currencies or valuations. Currency amounts are translated into foreign currencies at
historical exchange rates directly at the time of posting. Businesses such as those in highinflation
countries can therefore carry their inventories in a more stable currency (such as US
dollars). This reveals inflationary effects on inventory values.
If you use transfer prices to represent value flows in your company in different
valuation views, you must use the material ledger. This allows you to carry your
inventories in three different valuations (legal valuation, valuation for reporting
purposes, and profit center valuation).
Before activating the material ledger, make sure you know which currencies and valuations
you want to use, because you cannot go back and change the setting.
Activating the material ledger is a prerequisite for using multiple valuations.
Thanks
Raman

Material ledger is not active in valuation area S001

Dear All,
I have created a Scheduling Agreement & did the GR. When I am doing invoice posting system is throwing error as Material ledger is not active in valuation area S001
What might be wrong here ? For same material if I create PO then everything is working fine. Problem is only with SA.
regds,
CB

Hi,
Please check your Material Ledger Activation setting for the Valuation AreaC002 in T-code OMX1. The Check box for the ML activation against the Valuation Area-S001 may be ticked. After activation/ticking this box, T-code CKMSTART was not executed to complete the ML activation. If you want the activation of Material Ledger, you have to run T-code CKMSTART to complete this ML activation or Otherwise uncheck this box. I hope this step will resolve your issue.
Regards
appalas

NOOK Simple Touch says "Error Dialog: user not activated" whenever I try to open e-books?

I have had my Nook Simple Touch for about a year now, and I have been using Adobe Digital Editions without a problem. Now, all of the sudden, Barnes and Noble updated my software and I can't read any of my ADE books!! It just says "Error Dialog: User not activated" every time I click on them. I have looked at many other websites and I have tried plugging my nook in to my computer and reauthorizing it, reauthorizing my computer, deleting the digital editions file and .adobe-digital-editions file, redownloading my books, turning my nook off and on, crying, and screaming. The weird thing is, in all the instructions, it says a pop-up box will come up when I delete the files, but it never does. Is that normal? I always have to do it manually by clicking on the gear. I even made sure I "unhid" all the hidden files. I HAVE DONE EACH OF THESE AT LEAST 5 TIMES AND THEY NEVER WORK!!! HELP ME, PLEASE.
Also, a lot of the websites say to make sure your Barnes and Noble ADE I.D. is the same as the one on your ADE computer I.D.. Is the B&N ADE I.D. different from just the Barnes and Noble ID? Becasue I have been using my sisters email for my computer ADE and my email for the B&N I.D.. Are they supposed to be the same? If so, how come I was able to use it without a problem before?? I tried reauthorizing ADE with my email, because I also have an ADE account with my email, but then it wouldn't let me redownload my books onto the new account. Does this mean I have to change the ADE computer I.D. and wait until my books are available again to read them? Is that the way to fix it? UGH!
Help is much appreciated.
P.S. I have ADE version 2.0

Just to clarify, there are two levels of Authorization -- one for the ADE software and one for the nook. You have to use your Adobe account to authorize both (and they have to be authorized with the same user name). It sounded like your original problem (Kcoline) was with the Nook authorization, and it was the same problem the rest of us were having.
To get your files back, I suggest carefully reading over the "Activation and Authorization" section of the ADE help. It appears that ADE will automatically find your files but note the "Note" in quoted text below...
http://www.adobe.com/products/digitaleditions/help/
"After activation, any books, magazines, or other documents you previously bought with Adobe Acrobat® or Reader® software are migrated to Adobe Digital Editions. This is usually a relatively quick process. Adobe Digital Editions opens each item and reverifies its license to the user. If you don't have DRM-protected items, you don't need to be online during the migration. If you have a large number of items (for example, more than 100), then this process may take a while, but you will see a progress bar indicating the state of the migration as it proceeds.
Note: Items that you previously borrowed from a public library with Adobe Acrobat® or Reader® software are not migrated to Adobe Digital Editions. You need to return the library item and then borrow the item again with Digital Editions."
If it's not finding your files, it may be because they're located in a folder different from the one that ADE is trying to use to find them.
You may also want to check the "Transferring items between computers" section, as this describes where the files should be located, and how to reimport them into your library.
Good luck!

0FIGL_O02 DSO not activating

Similar Messages

Maybe you are looking for