0FIGL_V40 reporting financials not switched on

Hi Gurus,
I have installed the cube 0figl_v40 virtual cube and when i am tring to load the data or generate a report ,i am facing a error saying reorting finacials not switched on.can someone provide me the necessary setting for this info provider and advantages or disadvantages using this cube.
Thanks
Sridhar

Hi,
Check in
0FIGL_V40
http://help.sap.com/saphelp_nw70/helpdata/EN/ba/12122a0a024aef890f14d7ee875d76/frameset.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6044496a-e2a8-2b10-4192-ecd229cbe682
help.sap.com/bp_biv370/documentation/BW/I80_Scen_InstallGuide_EN_DE.doc
Thanks
Reddy

Similar Messages

Business Function "Reporting Financials" is not switched on

in rsa3 i am extracting data for 0co_pc_10 getting below error
Business Function "Reporting Financials" is not switched on
Message no. SREP_FIN001
Diagnosis
You tried to access functionality, which is provided by Business Function "Reporting Financials". However, the Business Function "Reporting Financials" is not switched on.
System Response
Error message
Procedure
Check if the Business Function "Reporting Financials" shall be used. In this case activate the Business Function.

Check below thread
Business Function "Reporting Financials" is not switched on

Help on Business Function "Reporting Financials 2" and its impact

Hi All,
I am looking at 'SAP Help' for Reporting Financials 2 (EhP4).
http://help.sap.com/erp2005_ehp_04/helpdata/EN/6a/cd7dbd74694af3ac13b3c24a10def4/frameset.htm
basically I want to use the standard extractor 0FI_AA_20 FI-AA: Transactions and Depreciation . when i try to run the extractor i get an error saying: Business Function "Reporting Financials 2" is not switched on
In order to use the new data sources the pre requisites are:
1. SAP Enhancement Package 4 for SAP ERP 6.0
2. Activated the Reporting Financials 2 business function.
The EnP4 is already implemented what i have do next is to activate the business function.
Can any one help me with more details on what all gets activated with this business function 'Reporting Financials 2' and its impact.
With Best Regards
Shilpa.

Hi,
in SFW5 you can get an overview over the business functions. There you could activate the appropriate Business Function.
But I would recommend you strongly before to read some information and documentation about business functions and the enhancement package concept.
Regards,
Markus

Questions regarding new functionalities in EhP 4 - Reporting Financials 2

Dear Forum,
in a project we would like to use some new functionalities from Reporting Financials 2 - ie. Datasource 0FI_AA_20 for Depreciation and Amortization loading to BI for following years as this can not be done by old extractor.
We are know looking for reliable information about impact and changes that are made in ERP if we switch on the functionality Reporting Financials 2 via SFW5? Will old extracors work nevertheless? Will all reports in ERP work without problems? Is there any impact on business processes? Or is this just additional functionality which will not affect current implementation?
Can anybody give information about this?
Thanks, regards
Lars
Edited by: Lars Hermanns on Jun 2, 2010 10:29 AM
Edited by: Lars Hermanns on Jun 2, 2010 10:29 AM

Marc,
Some additional questions regarding locking.
I encounter that the dataset that is locked depends on the restrictions made in the 'Characteristic Restrictions'-part of the query.
Restrictions in the 'Default Values'-part are not taken into account. In that case all data records of the characteristic are locked.
Q1: Is that correct?
To give an example: Assume you restrict customer on hierarchy node in Default Values. If you want people to plan concurrently this is not possible since all customers are locked then. When customer restriction is moved to Char Restr the system only locks the specific cutomer hier node and people can plan concurrently.
Q2: What about variables use in restricted keyfigures like variable for fy/period? Is only this fy/period locked then?
Q3: We'd like to lock on a navigational attribute. The nav attr is put as a variable in the filter of the Characteristic Restrictions. Does the system then only lock this selection for the nav.attr? Or do I have to change my locking settings in RSPLSE?
Then question regarding locking of data for functions:
Assume you use the BEx Analyzer and use the query as data_provider_filter for your planning function. You use restricted keyfigures with char Version. First column contains amount for version 1 and second column contains amount for version 2.
In the Char Restrictions you've restricted version to values '1' and '2'.
When executing the inputready query version 1 and 2 are locked. (due to the selection in Char Restr)
But when executing the planning function all versions are locked (*)
Q4: True?
Kind regards, Harjan

REPORT DOES NOT RUN CORRECTLY , URGENT PLEASE HELP

Hi,
I am trying to run a report from visul basic screen, but it does not run correctly. Here is how I am running the report. There is a screen developed in VB This screen prompts the user for user id and password. Once it gets that, it connects to the oracle database and pulls out a column from a table. And passes that value as a parameter to the report. Now I am calling the the report for each individual value . There are 21 value being pulled out of the database and it invokes the report 21 times. So there are 21 report engines gets started. Is there a better way to do that ? Secondly when I pass the parameter , some parameters does not pass correctly I guess , because its not generating any out put . Like out of 21 may be 10 or 11 reports gets generated correctly but rest of the reports are blank. I debug the screen i saw that the parameter value is correct, everything seems good. But still the reports are comming blank. Any Idea why it is so ? The command line that i am using in VB screen is
Shell "C:\progra~1\ora95_2\bin\rwrun60.exe P:\Business_Analysis_&_Reporting_Tool\Test_REPORT_Templates\STORE_TYPES\Baby_Distribution_Report.Rdf USERID=" & UID & "/" & PWD & "@cposp201 DESFORMAT=PDF DESTYPE=FILE DESNAME=" & txtPath.Text & Replace(strName, " ", "_") & ".PDF BRND='" & adoRecBrand!Brand & "' PRINTJOB=NO PARAMFORM=NO"
In the above command " adoRecBrand!Brand " is the parameter thats being passed. This is actually a recordset and brand is the column in it. When I debug the screen , I see the value also there. But the report comes out blank. Please help. This is urgent.
Thanks
Feroz

The way you call reports is not scalable. If you have 100 records come back from database, you would end up launch 100 engines at the same times, which probably will blow up your machine. You should use oracle reports server to do that. You can either use rwcli60 to submit the job to reports server, or invoke rwcgi60 from URL.
I am afraid some of reports engine failed to start and you get nothing back in your case.
After switch to use reports server achitecture, if you still see some report is blank in your application, then you can run that report with that special set of parameters manually and see if any problem with the report itself.
Hope this helps.
Thanks,
-Shaun

Reporting Financials - Pre requisites

Hi Experts!
I was looking at 'SAP Help' for Reporting Financials (EhP3).
http://help.sap.com/saphelp_nw04s/helpdata/EN/30/44593167d447198995bed770d70ddf/frameset.htm
It says that for using these (0FI_GL_40....) new data sources the pre requisites are:
1. SAP Enhancement Package 3 for SAP ERP 6.0 in all source systems
2. Activated the Reporting Financials business function
I am clear about point number 1. But I am not sure about point 2 (what it refers to).. Any Ideas?
With Best Regards
S Murugan

Hi Oscar,
Thanks for the update. I want to see whether this feature has been activated in a particular client before talking to their FI team. I am looking for step by step information to see whether this has been actiavted in the client environment.
Pls see if u can provide more information.
With Best Regards
S Murugan

Report node - not posted

Hi,
Reports are not getting posted and found the below message on the message log. Any help on this is highly appreciated.
Error getting report repository file statistics for process instance: 1812 (63,104)
PSUNX failed to post files to the report repository. Server scheduled to try again on 2013-09-25-13.47.49.112355. See log /facs/proj/peoplesoft/PT8.52/appserv/prcs/HRCS/log_output/_PSDSTSRVLOG/transfer_1630.log
===========
pshcmadm@fcas111:/facs/proj/peoplesoft/PT8.52/appserv/prcs/HRSND1/log_output/_PSDSTSRVLOG $ view transfer_1630.log
about to submit ftp -vin /facs/proj/peoplesoft/PT8.52/appserv/prcs/HRCS/log_output/_PSDSTSRVLOG/ftp_1630.txt
Connected to fcws110.fcs.facs.com.
220 "WARNING! THIS IS A PRIVATE COMPUTER SYSTEM. USAGE MAY BE MONITORED AND UNAUTHORIZED ACCESS OR USE MAY RESULT IN CRIMINAL OR CIVIL PROSECUTION. Except for some privacy rights granted by applicable law, by signing on to the system you acknowledge: You do not have any expectation of privacy in your use of the system. You are familiar with, understand, accept, and will comply with the provisions of Company Directive."
331 Please specify the password.
230 Login successful.
Remote system type is UNIX.
Using binary mode to transfer files.
250 Directory successfully changed.
550 Create directory operation failed.
250 Directory successfully changed.
550 Create directory operation failed.
250 Directory successfully changed.
550 Create directory operation failed.
250 Directory successfully changed.
550 Create directory operation failed.
250 Directory successfully changed.
550 Create directory operation failed.
250 Directory successfully changed.
550 Create directory operation failed.
250 Directory successfully changed.
550 Create directory operation failed.
250 Directory successfully changed.
257 "/facs/.p_peoplesoft/peoplesoft/PT8.52/psreports/HRCS/20130925/1616" created
250 Directory successfully changed.
200 Switching to ASCII mode.
local: /facs/proj/peoplesoft/PT8.52/appserv/prcs/HRCS/log_output/AE_AEMINITEST_1812/AE_AEMINITEST_1812.stdout remote: AE_AEMINITEST_1812.stdout
229 Entering Extended Passive Mode (|||43865|)
150 Ok to send data.
226 File receive OK.
303 bytes sent in 00:00 (415.00 KB/s)
221 Goodbye.
File Transfer Successful
============

We are getting the not posted issue, only when we enable the custom sign on peoplecode.
Thanks
Soundappan

ACS Report - User_Usage_Logon - not returing any data and the report never finishes

Hi,
i'm trying to run the User Usage report, but not getting any data output.
i tried to open the report in the report builder to check the query,, but the query is in XML format and i'm not able to figure out the actual query that pulls out the data.
i need help on the below :
1. way to check , if the ACS database , does actually have any data.
2. to pull out the actual query from the XML data.
thanks,
Sameer

Hi,
As we only have one report experienced this timeout issue. Given this situation, we can try the following steps to narrow down the issue:
1.Run the report directly through SSRS report manager URL to test if we still get this issue.
2.If yes, increase the timeout limitation for this single report.
3.As for further investigation, we can enable SSRS verbose logging by referring to the following steps:
Enabling verbose log in Reporting Services Instance :
To enable the verbose logging for the Reporting Services instance you have to follow below steps.
Go to location
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\bin
Find the ReportingServicesService.exe.config
file, make a copy first, and then open it in editor and change the below configuration.
<system.diagnostics>
    <switches>
      <add name="DefaultTraceSwitch" value="4" />
    </switches>
  </system.diagnostics>
  <RStrace>
    <add name="FileName" value="ReportServerService_" />
    <add name="FileSizeLimitMb" value="32" />
    <add name="KeepFilesForDays" value="14" />
    <add name="Prefix" value="appdomain, tid, time" />
    <add name="TraceListeners" value="file" />
    <add name="TraceFileMode" value="unique" />
    <add name="HttpTraceFileName" value="ReportServerService_HTTP_" />
    <add name="HttpTraceSwitches" value="date,time, clientip,username,serverip,serverport,host,method,uristem,uriquery,protocolstatus,bytesreceived,timetaken,protocolversion,useragent,cookiereceived,cookiesent,referrer"
/>
    <add name="Components" value="all:4,reportrendering:4,http:4" />
  </RStrace>
You have to restart the Reporting Services from Reporting Services configuration manager.
4.After enable the verbose logging, reproduce this issue again by running the report, record the timestamp when we start the report, when the error popped up.
5.Then check SSRS log files at the following path, in the file which contain the issue time, check if there is any error message.
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected].

Report is not getting displayed in ESS (ITS version)

Hi ,
I often create reports in ABAP HR and display them in ESS (ITS) .
But this time , report is not displaying the contents of internal table .I have first time used BAPIs to pass the values to internal table .
Is it the reason ??
Please help me in ths regard how can I make my report displayed in ESS.

Please make your transaction code as easy web transaction form SE93 and then try.

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

Report is not getting filtered

i created a date between prompt , and filters and selected as filter is prompted but while i selecting the date range in dashboard its report is not geting filtered.

Hi Saket,
check whether the particular column is prompted in the report....
Refer : http://obieeone.com/2010/03/04/lessons-in-filters-and-the-is-prompted-operator/
Thanks
Aravind

SharePoint 2013: A web analytics report is not available for this site.

Hello,
I have SharePoint Server 2013 and the enable usage data collection is enabled. There is usage logs and data being generated, but SharePoint says there is not data available.
A web analytics report is not available for this site. Usage processing may be disabled on this server or the usage data forthis site has
not been processed yet.
What can I do?
Thanks,
Paul
Paul

hi,
Web Analytics is now part of the 2013 Search.
You can refer the below links, :
http://blogs.msdn.com/b/chandru/archive/2013/08/31/sharepoint-2013-web-analytics-report-where-is-it.aspx
http://www.collabshow.com/2013/05/23/sharepoint-2013-analytics-a-big-step-backward/
http://usamawahabkhan.blogspot.com/2013/06/sharepoint-2013-analytics-features-how.html
if you wanna use API, there is a blog,which talk about the same:
retrieve Search Analytics Reports
using SharePoint 2013 API:
http://radutut.wordpress.com/2013/01/27/how-to-get-search-analytics-reports-programmatically-in-sharepoint-2013/

Web Analytics reports and not showing data

Recently we are not seeing Web Analytics data on our sites in our SharePoint 2010 farm. Before we used to see the data. This is what we are seeing now "There is no data available for this report. Here are some possible
reasons: (1) Web Analytics has not been enabled long enough to generate data;
(2) There is insufficient data to generate this report; (3) Data logging
required for this report might not be enabled; (4) Data aggregation might not be
enabled at the level required for this report."
I checked the Web Analytics Service Application and it is started. Web Analytics Data Processing service is started on all servers.
Microsoft SharePoint Foundation Usage Data Import Timer job is running every 30 minutes, while Microsoft SharePoint Foundation Usage Data Processing job is disabled. Does this job has to be
enabled for the web analytics data to be reported? Are there any other places to check to debug the problem? Appreciate any help.
rani

Hi Rani,
The timer job Microsoft SharePoint Foundation Usage Data Processing needs to be enabled, as it will aggregates and writes the data to the Web Analytics Reporting database.
Please enable this timer job and run the timer job to see how it works.
More reference about this error:
https://timreemtsma.wordpress.com/2011/10/25/sharepoint-2010-web-analytics-no-data-available/
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How can i open a link in new window (shift + Mouse Click) while not switching to the new window

I want to open a new window (shift + Mouse Click) while not switching to the newly opened window. The focus should remain on the window from where i have opened the link.

You can do that with tabs, but not with windows AFAIK.

New X1 Carbon Adaptive Keyboard strip not switching

I have a X1 Carbon Touch (Machine Type 20A7).
It came with Windows 8.1 Pro but I flahsed my company image (Windows 7 x64 Enterprise) onto it.
Everything works fine and I installed all drivers but the adaptive keyboard strip stays at F1 F2 .. keys and does not change no matter what. Pressing the Fn key does not switch it. I installed the On screen display and have the Adaptive Keyboard show in Control Panel and Dynamic Mode is also on.
The camera icon only flashes the screen once and does nothing. The Wifi icon does nothing and the Gear icon does nothing as well. Only the keyboard light icon and the regular F1 F2 keys work fine.. Any help is appreciated.
EDIT:
I noticed something funny.. While starting up or before logging into Windows (at Windows lock screen) I'm able to switch the adaptive keyboard strip... But once I'm logged into Windows it suddenly stops working. if I lock the screen again I'm able to switch the adaptive keyboard strips again... What's going on?
Solved!
Go to Solution.

When I have seen this in the past it is caused by not having the proper Power Management driver in the OS image.
20A7 uses a new version of Power Management driver and if your IT guys didn't update the company Win7 image to include the new driver, then it's not going to work.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS032258

0FIGL_V40 reporting financials not switched on

Similar Messages

Maybe you are looking for