0figl_vc1_q0002 and hierarchy error

I try to call a report 0figl_vc1_q0002 (cash flow) and I get the error: "Hierarchy INT 00000000 is not available for InfoObject Fincl Statement". All objects that are needed by virtual cube 0FIGL_VC1 (including cube 0FIGL_C01) are updated except one. It is hierarchy for 0GLACCEXT. I can't find update rules to refresh/upload that hierarchy. Where can I find it? Do I have to create it myself?
Are there in Business Content other cash flow reports?

check your system and see the Plug-in. datasource: 0GLACCEXT_T011_HIER is available
from Plug-In release 2003.1. You can find this information in the link
below:
http://help.sap.com/saphelp_nw70/helpdata/en/64/032de5ff014c4c86bc
15272216a5e2/frameset.htm
Colin

Similar Messages

  • Error while deleting category and hierarchy

    Hi All,
    I am not able to delete the categories and hierarchy. It is throwing a message products are still assigned to categories. But when I go to maintain products and click on start it is not showing any product. I created another category also. It is showing another error certain set types can be assigned to base categories. I went to se38 and given the program COM_PRODUCT_DELETE_SINGLE also and deleted every product. Still I am not able to delete category.
    Again when I delete some set types from the category it is showing another message that products of subcategory already exists. Set type cannot be deleted.
    Can anybody suggest me what should I do?
    Thanx
    Sarvana

    Hi Saravana,
    If you have tried COM_PRODUCT_DELETE_SINGLE, then I'm guessing that you must be aware of making an entry in the table COMC_PR_TOOL_REG wherein you register the system program that you want to execute for ex: Delete Product, Category etc.
    Ensure that there are no entries in the table COMM_PRODUCT. You can also try program COM_PRODUCT_DELETE_ALL to delete all products in the system.
    In order to delete Product hierarchy you could use program COM_HIERARCHY_DELETE_ALL or COM_HIERARCHY_DELETE_SINGLE which would delete Hierarchies with All Category Data.
    Also, in order to delete Category-Set type relationships, delete entries from the database table COMM_CATFRGR.
    Hope this helps.
    Regards,
    Pavithra
    **PS : Please reward points if this helps

  • Processor Core Cache Hierarchy Error in event viewer and BSOD

    Hello everyone. Lately I have had some problems with random freezing, and I can't figure out what's causing it, hoping to get some help here.
    I have a MSI X79A GD65 (8D) motherboard and 4930K cpu, currently running @ 4.4ghz, 1,33V, disabled all the power saver features.
    The PC have been stable for almost a year without issue, and just recently the PC have started randomly freezing. It can be up and running for a whole week without problems and then suddenty freeze, or sometimes just few hours and then freeze. It seems like it always freezes when surfing the web, and it tend to happen during scrolling a website. It is never happening during gaming with heavy load.
    The error message is following:
    WHEA Logger A fatal hardware error has occurred.
    Reported by component: Processor Core
    Error Source: Machine Check Exception
    Error Type: Cache Hierarchy Error
    Processor APIC ID: 8
    Things I have tried: Reverted back to stock speeds in bios, updated to latest bios, tried a other power supply and formated windows with newest drivers, no difference. Memtest does not show any errors, and the pc passes prime/intel burn test. Cpu temps are fine.
    What more can I do ? Is there a chance that the CPU have taken damage from my "little" overclock ?

    Hi,
    Can you tell what were temps of the CPU while overclocked and under full load (Intel Burn Test)?
    Also, did you try different RAM? And are you currently running RAM at frequency of....? (Reduce to 1600MHz).

  • Configuration Manager 2012 SP1 Prerequisite Checker returns "Migration active source hierarchy" error

    Hello, 
    I am getting "Migration active source hierarchy" error in the SCCM 2012 SP1 prerequisite checker on the CM 2012 primary site. The error says "There is an active hierarchy configuration for the migration. Please stop data gathering for each
    source site in the source hierarchy." However, actually there is no migration source hierarchy configured and there are no migration jobs displayed in CM 2012 console. We used to configure this feature to migrate CM 2007 to current CM 2012 without service
    pack two years ago and we have deleted these configurations. 
    In migmctrl.log, the following record is being generated every 60 minutes. 
    ======================================================
    Connection string = Data Source=xxxxx;Initial Catalog=xxxxx;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Encrypt=True;TrustServerCertificate=False;Application Name="Migration Manager".~~  $$<SMS_MIGRATION_MANAGER><04-07-2014
    01:01:53.710+300><thread=6992 (0x1B50)>
    Created new sqlConnection to xxxxx~~  $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
                                                                    [Worker]: Start two step scheduling
    for MIG_Job~~  $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
                                                                    [Worker]:        
    Step 1. Query the schedule items that was running or requested to start immediately ...~~  $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
                                                                    [Worker]:        
    Step 2. Query the first item in order of DateNextRun ...~~  $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.819+300><thread=6992 (0x1B50)>
                                                                    [Worker]:        
            No item found. Sleep until the next event.~~  $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
                                                                    [Worker]: End two step scheduling
    for MIG_Job~~  $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
    [MigMCtrl]: the workitem queue is full!~  $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
    [MigMCtrl]: WAIT 3 event(s) for 60 minute(s) and 0 second(s).~  $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
    ======================================================
    I am not really sure where to look into in this case. I would appreciate any advice. 

    Hi,
    Could you please upload the full migmctrl.log?
    How about specifying a source hierarchy with the same name and password of the hierarchy before in the console, then click Clean Up Migration Data?
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • STS hierarchy error

    STS hierarchy error
    Hi there
    After we upgraded to BI 7.0 and SEM 6.0 we are facing problem with the STS hierarchy.
    Before the upgrade each user will go to the planning page corresponding to his/her assigned department directly.
    After the upgrade, all users are seeing the whole hierarchy  and have to navigate to there own node.
    Any suggestions / ideas.
    Regards

    Maybe this is elementary and you have checked it already -
      Just ensure that the users do not have authorization for the auth object R_STS_SUP and R_STS_CUST.
    Regards
    Sriram

  • Heading level hierarchy errors when topics are in TOC more than once

    I have discovered that the hierarchy in the Heading levels in
    the Printed Documentation will differ from than in my online help
    table of contents hierarchy, and that the problem is due to topics
    that are intentionally in the TOC more than once.
    For example, in chapter 5 of a particular help system the
    hierarchy should be:
    Heading 1 < Chapter 5 title from top-level book>
    Heading 2 <title of second level book>
    Heading 3 <title of topic that appears under second-level
    book>*
    What I actually get is:
    Heading 1 < Chapter title from top-level book>
    Heading 2 <title of second level book>
    Heading 4 <title of topic that appears under second-level
    book>*
    * This same topic appeared in an earlier chapter. In that
    chapter it was really at a Heading 4 level.
    Due to company styles, etc. we use a numbering system at the
    headings and in the TOC, so instead of
    5
    5.1
    5.1.1
    I erroneously get
    5
    5.1
    5.1.1.1
    This type of hierarchy issue appears multiple times in this
    particular document (which I inherited by the way.)
    Other than restructuring the document to not reuse topics in
    different places in the TOC, is there a solution or a workaround
    for this problem?
    What I am doing so far, is generating the Print Documentation
    one chapter at a time. As long as a topic is not reused with the
    same chapter, my hierarchy of heading levels is maintained;
    otherwise, it is not. Then I can put the chapters back together
    after fixing the few places that still have heading level problems.
    This however, will be quite cumbersome as this document is
    translated into nine other languages.
    I am using RoboHelp X5 for Word / Word 2003 for the source
    and most of the translations; RoboHelp Asian Edition, Simplified
    Chinese / Word 2003 for the Chinese translation. The heading level
    hierarchy error occurs in both versions.

    >> AF: I've commented in sections...
    Without Maintain Heading Levels, RH will apply heading levels
    to the books and then the topic levels will get bumped down. So a
    top level book will be Heading 1 and the Headings in the topic will
    get bumped down to 2, 3 and 4 etc. If then you have another book
    one level down so that it gets Heading 2 applied, the same topic
    but under the level two book would then get 3, 4 and 5 applied.
    That is not the original problem but hopefully we are agreed
    that is how things work on that.
    >> Yes - that is the expected behavior. When it didn't
    happen as expected, that's what led me to the discovery of the
    cause of the problem (topic reuse).
    Your problem was that firstly Heading 3 got bumped to Heading
    4 if the same topic was inserted into the TOC twice. I assume it
    was OK in the first instance, or is it that when you add it twice
    it goes wrong everywhere?
    >> Your assumption is correct. First occurrence is
    correct. Second, third, and fourth (yes - there is one topic that
    is used 4 times! ) are not correct based on TOC hierarchy.
    On the numbering, nothing surprises me. If you look at my
    site you will see that for RH HTML, i gave up on getting it right.
    I have had many queries on this and more than a few people have
    indicated they will work on the problem and get it working. I'm
    still waiting. There are many posts about outline numbering
    problems. Has anyone got it working satisfactorily?
    >> I don't really have numbering problems. The
    numbering is following the RoboHelp-generated hierarchy and the
    .dot template that I apply. It's just that the RH-generated
    hierarchy and its heading levels don't correspond to the "real"
    hierarchy because of the reuse issue.
    I have seen various Word gurus maintain that numbering has
    not worked entirely satisfactorily since Word 2! Also enough posts
    to convince me this is a Word issue, not a RH issue.
    If you want to create a new project and knock something up
    that demonstrates this problem, by all means zip it up and send it.
    I'll assume it will be a small project and zip to less than 5mb. If
    more, contact me first.
    >> Unless you have RoboHelp X3 Asian Edition,
    Simplified Chinese, there is really no need. I plan to either avoid
    the reuse issue in the source, or build the print doc in sections
    which is easy enough in RoboHelp X5 for the non-Chinese languages.
    It is in the older Asian edition where the problems are compounded
    by the omitted reuse topics. If you do have RoboHelp X3 Asian
    Edition, Simplified Chinese and want to experiment, I can send you
    a cut-down version of the project. Don't feel obligated though;
    unless you can read Chinese (I can't) it is very tedious to work
    with.

  • K9N2 SLI Platinum - S3 Resume From Suspend - Cache Hierarchy Error

    With my system I am running into a strange error when returning from S3 suspend. The underlying error seems to be "Cache Hierarchy Error". It occurs (only sometimes) within a minute or so after resuming from S3 suspend.
    I goggled around and did not find out much. I also posted on the AMD user forum. No response. So I RMA'ed it. In the 2 weeks it took to receive a replacement I used my old AMD 5400+ processor. I had no problems with that processor in the entire 2 weeks.
    I received a brand new (boxed and sealed) 9850. Ran for a day OK. Now I am receiving the "Cache Hierarchy Error" again.
    From the forgoing facts I am positive this is NOT a AMD processor problem.
    I am guessing that this error is showing up because the MB is not supplying enough power to the processor during S3 suspend??
    Anyone have any thoughts on this please?
    Note - this is NOT and end of the world problem (it does not occur during S1 suspend for instance so I can always do that).
    Thanks:

    Well, so far I have tried every driver I could find. I Started with the version on the CD, then downloaded from MSI, then tried M$ update, then nvidia. So, I really doubt it is a driver. I found a similar issue here: https://forum-en.msi.com/index.php?topic=120233.0
    same processor and mobo. Thanx BOSSKILLER for the link. Filled out my info, I hope they get back to me soon.
    I filled out a support request earlier and got this as a reply
    Quote from: MSI Tech.
    Please refer to Microsoft for possible fixes on this issue: http://support.microsoft.com/search/default.aspx?mode=r&query=does+not+resume+from+s3&spid=11732&catalog=LCID%3D1033&1033comm=1&res=20
    none of those have anything to do with my problem and of course my first thought was that it was a M$ problem but had to rule that out after installing XP too... way to pass the blame 
    EDIT: After contacting MSI using BOSSKILLER's link, I got the real solution! A new BIOS just as he said  Very quick response too
    Thanx All 

  • Each time I try to synch photos from my Windows 7 PC to my iPad2, iTunes stops working, and the error report says Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     10.3.1.55   Application Timestamp:     4deec35

    Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
    Problem Event Name:                          APPCRASH
      Application Name:                             iTunes.exe
      Application Version:                           10.3.1.55
      Application Timestamp:                    4deec351
      Fault Module Name:                          ntdll.dll
      Fault Module Version:                        6.1.7601.17514
      Fault Module Timestamp:                 4ce7ba58
      Exception Code:                                  c0000005
      Exception Offset:                                0002e3fb
      OS Version:                                          6.1.7601.2.1.0.768.3
      Locale ID:                                             1033
      Additional Information 1:                  0a9e
      Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:                  0a9e
      Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
    I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
    Any suggestions?

    I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
    I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up  again as soon as I click on the "Synch photos from" button.

  • 2TB Ext. Hard Drive is corrupted?, error code -50 and then error code -35 when i try to empty out my trash

    okay so a few days ago i received and email for one of my colleagues to do some final editing to a music video. the folder contained 2 videos a rough chops and the main which was about 2-3GB which i dragged on to my external hard drive . and at the time i was trying to install a trial version of parallel lines and me being a newbie to the software i didn't know i need windows installments for it to run lol but yeah... so i was just getting frustrated with the software i kept installing it uninstalling it and then i was thinking my the problem might be because my MacHD space is low (less then 40GBs on my MacHD), so.. i installed it on my hard drive where all my important files are (I'm a graphic designer and do light video editing) video projects and many photoshop projects form 2007 and logs and just a bunch of important files in my hard drive. so because i was so frustrated with the software i wasn't thinking and i installed it on my external 2TB hard drive. and when i realized parallel wasn't working i gave up, uninstalled the program form the hard drive and for some reason when i did that and i tried opening the video my friend had email to me and for some reason it did load up but a few seconds maybe about 10sec in the video is froze and closed my media app (VLC) and when i tried opening other video files it would freeze every few minutes but those specific files i had drag in last were not playing after at least 5 secs and eventually didn't open at all so i restart my computer login and now i get scared i see that my MacBook Pro isn't reading my external hard drive so i search threw forums... i unplug from the wall plug my external hard drive back in my computer and it loaded up but when i opened my external hard drive all my files had that plank white paper icon on my folders (because i have everything organized but subject when you open then drive folder. so... i go in to my projects and nothing, i open my edited photos and nothing... my hart feels like its about to drop and i keep opening files and there is nothing in them, but in "get info" of my drive it shows that there is filled so i go to "disk utility"... i "verify disk" passes ..."repair disk" doesn't past.... i look it up in forums... so i reboot my computer and go to the safe recovery menu. go threw the same ting "disk utility"... verify, pass... repair, pass... so now i feel relieved. i login files in the ext. hard drive load up i tried again to open the files and same thing happens... so now I'm thinking its the files i drag the files to the trash and try to empty and its gone i reboot the computer and my drive didn't load up so i tried unplugin it and back in... drive comes up i notice theres trash.. i tried emptying it and i get the error code -50. and no files are popping up on my external drive and i try to repair/unmount disk and the verify disk doesn't pass and when i click repair disk it doesn't past and another error code pops up -35.... so i felt my drive alone for a few days and yesterday i go the files deleted from the trash and now I'm not getting any codes but when i try to unmount.verify/repair the disk. keeps letting my tits need to be repaired so i click the repair button another error unable to unmount volume to repair...
    what do i do? my files still don't show up. and I'm very sorry for the long paragraph but i have to be detailed for you to understand my situation

    Read this.

  • Sender mail adapter : no messages and no error log

    Hello,
    I have configured a sender mail adapter to read mails from the inbox. I have used IMAP protocol. URL is specified as imap://EMHBSEXM01/Inbox. User name and password is also specified properly. I have kept poll interval to 1 minute. Messages in the inbox are in unread status. But the mail is not getting processed. I do not see anything after 1 minute. I tried using generate fetch report flag. But even then it does not create any message in SXMB_MONI. I checked runtime workbench for Mail adapter but I do not see any message for the same. Is there something that I am missing?
    Thanks,
    Dev

    Hi All,
    I chekced your responses and tried accordingly. Our basis team has given me new link now and the error message has changed. I am getting following error message.
    exception caught during processing mail message; java.io.IOException: unexpected login response; read 001F BAD Command received in Invalid state.
    Does anyone have any idea what this error is?
    Thanks in advance,
    Devendra

  • Plug-in errors and dependency errors with a CAF app in DS in NW CE 7.1

    I am learining to build CAF apps in Developer Studio in NW CE 7.1.  Here are my steps and the errors I am getting:
    Open Developer Studio
    Switch to the CA perspective
    File->New->Project
    Choose Development Component under Development Infrastructure
    Press Next
    Choose Composite Application under sap.com
    Choose MyComponents[demo.sap.com] under 'Local Development'
    Vendor: demo.sap.com
    Name: carpool
    Caption: Car Pool
    Language: American English
    Domain: SAP-xApps
    Support Component: CAF-APP (typed in, not chosen)
    Press Finish
    The following error appears:
    Status ERROR
    Plugin : com.sap.ide.metamodel.core.services.eclipse
    code=0
    Internal error
       Plugin name: Metamodel Core
       Internal error  : com.sap.ide.metamodel.core.services.eclipse
       Class      : com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker
       Method     : computeIdeJarProperties
       Message    : C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
       Exception  : java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
    java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
    at java.util.zip.ZipFile.open(Native Method)
    at java.util.zip.ZipFile.<init>(ZipFile.java:203)
    at java.util.jar.JarFile.<init>(JarFile.java:132)
    at java.util.jar.JarFile.<init>(JarFile.java:70)
    at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.computeIdeJarProperties(ArchiveVersionChecker.java:296)
    at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.doFullCheck(ArchiveVersionChecker.java:214)
    at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.checkProject(ArchiveVersionChecker.java:125)
    at com.sap.ide.mmservices.core.eclipse.generation.GenerationServiceEclipse.checkArchiveVersions(GenerationServiceEclipse.java:110)
    at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.checkArchiveVersions(GenerationBuilder.java:335)
    at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.build(GenerationBuilder.java:85)
    at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:624)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:166)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:197)
    at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:246)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:249)
    at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:302)
    at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:334)
    at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:137)
    at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:235)
    at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
    I do not think I missed anything installing NW CE 7.1, but this error makes me think that some plug-in was erroneously left out of the install. 
    Incidentally, I can continue onward and build an app (this is obviously a tutorial), but when I try to deploy I get the following error:
    The deployment of the archive failed with an exception!
    ([ERROR CODE DPL.DCAPI.1027]) DependenciesResolvingException.
    Reason:[ERROR CODE DPL.DC.3033] An unresolved dependencies error
    occurred while sorting the deployment batch items regarding the
    dependencies.;nested exception is:
    com.sap.engine.services.dc.cm.deploy.sdu_deps_resolver.UnresolvedDepen
    denciesException:[ERROR CODE DPL.DC.3437]Unresolved dependencies
    found for the following deployment items:
    1. Component: name:'carpool~ear',vendor:'my.company',location:
    'localDevelopment',version:'20080501110329',software type: 'J2EE',
    dependencies:'[name:'cafruntimeear',vendor:'sap.com',name:
    'cafcoreear',vendor:'sap.com']
    Unresolved dependency:
    name:'cafruntimeear',vendor:'sap.com'          (not found in the admitted
    batch items and the repository)
    Unresolved dependency:
    name:'cafcoreear',vendor:'sap.com'          (not found in the admitted
    batch items and the repository)
    Please check the error log for further informations.
    Again, this looks like I am missing some components.
    Any assistance is greatly appreciated.
    TB

    Further developments:  As you may note from the error message, DS is looking for com.sap.ide.metamodel.core.services.eclipse in both the C: and the E: drive at the same time.  In fact, this file exists in the E: drive subdirectory listed, so I obviously have an error with two drive designations being concatenated.  Does anyone know how I can change the lookup directory for this dependency (or any dependency)? 
    Thanks,
    TB

  • Input and CRC errors on ASA 5505 outside interface

    All,
    I see input and crc errors on my ASA 5505  eth0/0(outside) interface and packet drops. There is very slow connection though we have 20mb line. ISP also sees the issue on the Lan interface side. We have the speed and duplex configured same on both ISP and our end.
    I am suspecting if this is Physical cable issue. Please suggest.
      Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
            Full-Duplex(Full-duplex), 100 Mbps(100 Mbps)
            Input flow control is unsupported, output flow control is unsupported
            Available but not configured via nameif
            MAC address 001a.b4c9.f3d9, MTU not set
            IP address unassigned
            158138067 packets input, 141061681082 bytes, 0 no buffer
            Received 183037 broadcasts, 0 runts, 0 giants
            19642 input errors, 19642 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
            0 pause input, 0 resume input
            0 L2 decode drops
            144684 switch ingress policy drops
            124291353 packets output, 38197278051 bytes, 0 underruns
            0 pause output, 0 resume output
            0 output errors, 0 collisions, 0 interface resets
            0 late collisions, 0 deferred
            0 rate limit drops
            0 switch egress policy drops
            0 input reset drops, 0 output reset drops

    Hello Ravi,
    This kind of issues CRCs/ Input Errors are tipically known as L1 issues so make sure you check the cable and if that does not make a difference change the port on each side to see if there is a difference.
    Unfortunetly the ASA does not support the Time-Domain Reflectometer feature so we must do the test of L1 by ourselfs.
    Can you clear the counters of the interface, test the changes provided and provide us some feedback?
    Looking for some Networking Assistance? 
    Contact me directly at [email protected]
    I will fix your problem ASAP.
    Cheers,
    Julio Carvajal Segura
    http://laguiadelnetworking.com

  • Can anyone help me connect my Macbook Air to a SAMSUNG TV.  When I follow the basic instructions (Thunderbolt to HDMI connection) the screen on my computer goes grey and an error message appears inviting me to press any button to restart th

    Can anyone help me connect my Macbook Air to a SAMSUNG TV.  When I follow the basic instructions (Thunderbolt to HDMI connection) the screen on my computer goes grey and an error message appears inviting me to press any button to restart the Macbook.  When I do this nothing happens.  Only when I disconnect the computer from the TV does the Macbook allow me to login. The TV does not receive any signal from the Macbook even though I know the HDI port works fine.  Any ideas what I'm doing wrong?  Do I need to enable something on the Macbook?

    An update...
    I downloaded Apple's (rather large!) list of software updates today, and I was finally able to recognize my iPod again. I did a restore using the iPod updater from 06-2006, and all seemed to work OK. (I'm afraid to try the new one again!)
    Then I tried to re-load my music library from iTunes, and got stuck. It froze up after a while and wouldn't go any further.
    When I disconnected my iPod from my computer, I find 2 podcasts and nothing else, though iTunes told me it had transferred 600+ songs. Those 2 podcasts do play fine, and the basic iPod software all seems to be intact.
    So -- anyone get through this connection problem and have any ideas to share??
    iMac Mac OS X (10.4.7)

  • I have updated my iTunes to the latest edition and now my iTunes wont open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?

    I have updated my iTunes to the latest edition and now my iTunes will not open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?

    Solving MSVCR80 issue and Windows iTunes install issues.

  • Time Machine won't back up. Starts of REALLY SLOW, and the errors out.

    I've been having a hard time getting time machine to back up. To start off I'll give you my specs and what I have done.
    iMac
    OS 10.6.6
    2.4 GHz Intel Core 2 Duo
    4 GB 667 DDR@ SDRAM
    320 GB HD
    All software updates are current. I am trying to back up to an external Western Digital 1 GB drive connected by USB2. I have formatted the external drive, and set a single partition on that drive from the Disc Utility. I have run disk repair on both the external and local hard drive. I have run disk repair permission on the local drive. I have restarted, after every time. I have done everything listed above multiple times, and have done them all in kinda different orders each time.
    My thought is that the issue may not be with the hard drives, but maybe a file its trying to back up. When it starts out for the first time, it tells me that it needs to back up over 100 GB of data. It gets about halfway done, and then errors out. When I try to start it again, it tells me that it needs to backup around 50 GB of data. And this time, its REALLY slow. Like bytes slow, not Mega bytes, or even kilobytes. Bytes. 36 bites backed up, 120 bytes backed up. 2 Kilobytes backed up. SLOW SLOW SLOW.
    Then it picks up, and usually gets up to 120 MB, and then gives me this error message "The Backup was not performed because an error occurred while copying files to the backup disk. - The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk."
    Its a pretty generic message, and gives me no help in trying to figure out what the problem is. I've been trying again for almost 3 days now, and nothing is working. Is there an error log file that I can go find that would help me a little more?

    woody24 wrote:
    "The Backup was not performed because an error occurred while copying files to the backup disk. - The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk."
    See #C3 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
    Its a pretty generic message, and gives me no help in trying to figure out what the problem is. I've been trying again for almost 3 days now, and nothing is working. Is there an error log file that I can go find that would help me a little more?
    Tell Apple about the inadequacy of that message: http://www.apple.com/feedback/timemachine.html

Maybe you are looking for