0FISCPER Attribute Display Properties for F4 Help

Dear All
I am trying to disable the display of the Attributes of 0FISCPER in the F4 Help by making the sequence 0 for all in object maintenance as I have done for many other objects. This however is not possible for 0FISCPER as it is "greyed out". does anyone know why this is so and if possible a workaround for this.
Regards
Grant.

Hi Grant,
I am facing the same issue, right now. Did you already found a solution for this?
Thanks,
Steven Groot

Similar Messages

How to set up display properties for a crosstab is CSS?

I am woundring how to setup css class and code like in this tutorial.
myalerting.css ?
Set up display properties for a crosstab: Design Studio 1.2 - YouTube.
Design Studio 1.2: Set up display properties for a crosstab
if you have sample file please share I am sure other can be befits from as well.
I would like to use color display on numbers or icons in seperate column if the value in certain range or a value is below or avove business needs.
Thanks.

Kevin,
I could not get this to work on my installation; perhaps you can review and "run with it" or someone better with CSS can assist.
The gist of it is there is a class .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background to define the status symbol for the alerts
Based on your Exceptions in the BEx query, Good 1 is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background
Good 2 is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert3Background
etc... Bad 3 (red symbol) is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert9Background
I tried the following custom CSS on the crosstab, note using IE (which now we can no longer use until Microsoft patches)
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlternating{
background-color:#F9F9F9 !important;
myAlerting.sapzencrosstab-DataCellDefault{
background-color:#FFFFFF !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background
color:rgba(0,0,0,0.0);
background-image: url('/aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_1.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert2Background
color:rgba(0,0,0,0.0);
background-image: url('/aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_2.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert3Background
color:rgba(0,0,0,0.0);
background-image:url('green.png');
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert9StatusSymbol
color:rgba(0,0,0,0.0);
background-image: url('aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_9.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
I didn't want to hold you up and for sure I hope there is someone in the community who could help. I'll try again when we can use IE

How to set Displayed Properties?

I want to set different Displayed Properties for folder and documents in my layout.How can I archieve that?
Best Regards!

Hello,
Depending on your requirement, you will have to change your Collection Renderer and Resource Renderer.
http://help.sap.com/saphelp_nw04/helpdata/en/79/a1d23e6b2c3d67e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/87/41389793deac4f92696f38378e56fb/frameset.htm
It seems we have posted at the same time, for your requirement, Resource Renderer should do this.
But if you want to hide some properties which are exisiting on folders! then even Resource Renderer cannot solve this.
As you have one Resource Renderer per <b>flavor</b>, you will set same Visible Properties for both Folder and File. If the property does not exist on Folder/File, it just shows empty property. But you cannot hide exisiting properties depending on if the resource is File/Folder.
Here only a custom implemented Resource Renderer can solve your problem.
Hope this helps...
Greertings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers
Message was edited by:
Praveen Gudapati

Sintaxis for Displayed Properties

HI
Im doiing a New "Collection Renderer Settings" and i would like to know the sintaxxis for Displayed Properties field
thanks

Here you go:
http://help.sap.com/saphelp_nw04/helpdata/en/79/a1d23e6b2c3d67e10000000a114084/content.htm
Hope this helps!
-StephenS

I have a problem that I try to turn on the iPad 2, but he was just lighting up, but nothing is displayed. I do not know what happened, but yesterday did not do this. Thank you for your help.

I have a problem that I try to turn on the iPad 2, but he was just lighting up, but nothing is displayed. I do not know what happened, but yesterday did not do this. Thank you for your help.

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

I have a macbook connected to LED cinema display. The display started to flicker. The display turns black for a second or two. Sometimes I restart macbook and display. Sometimes it helps.

I have a macbook connected to LED cinema display. The display started to flicker. The display turns black for a second or two. Sometimes I restart macbook and display. Sometimes it helps.

same issue, either your wiring or display itself is going bad. for me, it was the display but luckily still under warranty

Customer-specific attributes (properties) for processes?

Hello community,
I already know how to define customer-specific attributes (properties) for documents stored in Solution Manager using the Document Modelling Workbench. For documents, everything works fine, so far.
But: I also want to define customer-specific properties for processes. Is this possible? If yes, how do I do that? I cannot find any related configuration options -- neither in SPRO nor in Solution Manager's own project configuration area.
Thanks in advance,
Thomas

Hi,
In SPRO, naviagete to SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Scenario-Specific Settings -> Implementation/Upgrade -> Blueprint and Configuration -> Object Attributes -> Definition of Customer Attributes for Object Types
Best regards,
Jacques.

Setting preferences for hyperlink display properties

I want all new hyperlinks created by InDesign and InCopy users at my site to have a certain set of properties. I want them to be sort of orange, with a thin dotted line around them. This is not so that they can be exported to pdf with buttons, but just so that we can preserve links in text for a print paper which is later going to be exported to the web, and I have a script that expands them into html at that point.
But I can't seem to find any preference that I can set that will allow me to set default display options for all hyperlinks newly created by users. Hyperlinks used to show up automatically as black rectangles for us, and now they show up invisible. So because I have personally witnessed some change in the default behavior, I feel sure there must be a preference I can set somewhere. But it's possible that was just the switchover from standard behavior in CS4 to standard behavior in CS5.
Any ideas?

Sorry but no. There are no viewing preferences for the iTunes Store.

VO Attribute displaying lookup meaning for code

Hi experts,
How to make a VO attribute display lookup meaning for the code stored in DB into the query results table?
Regards
Ari

Hi,
Your lookup code is stored in DB table. So. it should be there in your VO query.
Now you want to have its meaning as well in that VO query.. right ?
For this, add another column in VO query like:
(select meaning from fnd_lookup_values where lookup_code = XxEO.code) code_meaning
--Sushant

HT5361 MacMail has stopped noting when I have read an email. For example, I had 17 unread messages, so I read them. Despite me having read them AND deleted them, the inbox still has 17 new messages displayed. Can anyone help resolve the incorrect displ

MacMail has stopped noting when I have read an email. For example, I had 17 unread messages, so I read them. Despite me having read them AND deleted them, the inbox still has 17 new messages displayed. Can anyone help resolve the incorrect display?

Lord K. Thank you. Yes I am within the 90 time period, however I travel Intertionally and I can not receive not make a call to Apple. I was just at the Genius Bar in Chicago and they said, don't worry about it. It just floats out there, however, I can not recover my messages on a flash drive. I need to go back to my old computer which I don't have with me. My messages were in folders for a lawsuit. It is going to take an incredible amount of work for me to, you have no Idea. We are talking thousands of pages! I the defendent will have them during discovery so I am not so worried. However, I can not bring them to him on a Flashdrive when I meet with him without an extraordinary amount of presssure on my part. THis is not just some little email issue. This is suing EXPEDIA and Tripadviosr.com

Sometimes, my iPhone displays a "E" instead of "3G". Can someone explain me why and what it means ? Thx for ur help !

Sometimes, my iPhone displays a "E" instead of "3G". Can someone explain me why and what it means ? Thx for ur help !

You are connected to an EDGE network. See page 17 in the "Basics" section of the User Guide.
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

Can't change displayed properties in resource renderer

Hello everybody!
I'm trying to do display a very simple list of filenames in a KM navigation iView. I've assigned a layout set, which references a collection renderer and a resource renderer. In the resource renderer, "Visible Properties" is set to rnd:displayname(contentlink).
But still I get a list with filename, file size and timestamp. No matter what I put in the "Visible Properties" field, the same thing is displayed.
I've verified that the layout set references the correct resource renderer by changing other attributes ("Command Display", for instance), and these changes do have an effect.
Any ideas what might be the problem here?
One more thing. This iView is a dynamic navigation iView. How can I make the documents open in the content area of the portal instead of in a new window?
Any help is very much appreciated.
-martin

Hi Martin,
seems like you have selected a collection renderer for "structured output", like the grid or tree collection renderer. In this case the collection renderer is the one who is responsible of the properties displayed.
So what you have to do is edit the parameter "Displayed Properties" of your collection renderer with the properties you want to display.
Check this <a href="https://forums.sdn.sap.com/thread.jspa?threadID=28751">link</a> for more info about "unstructured vs. structure coll. renderers".
Hope this helps,
Robert
PS: The iView Property "Launch in New Window" should be set to "Display in Portal Content Area", in order have the iView displayed as you wish.

Apply display properties to all prompt pages

Hi,
I am using obiee 11.1.1.6. I have 1 dashboard and 2 pages in the dashboard . Page 1 of the dashboard consists of 1 Dasboard prompt and 1 analysis. Page 2 consists of the Same prompt as Page 1 and different analysis based on the prompt . When I take use a prompted link of the dashboard and use the same link to the differnt IE( interent ink tab) prompt of Page 2 doesnt not work . The selection is not working for Page 2 but works for Page 1 . I have defined the scope of the Prompt to be a Dashboard level. And the icon of apply display properties to all prompt pages is gryed not and doesnt allow me to select anything. What might be the issue

Hi again JaredA
I'm not trying to be a PITA here, but if you edit a Text
Caption and click the Help button, you should see a topic titled:
Text Caption properties dialog box - Text Caption tab
Inside this topic, there is a line that reads:
Apply properties to all captions in the movie: Select this
option to apply the changes you made on this tab to all captions in
the movie. (List of properties that are applied, and are not
applied, to all caption items)
And note that the word "List" is a hyperlink. When clicked,
it reads:
The following properties are applied to all caption items if
this option is selected:
* Caption style
* Font type
* Font size
* Font color
* Transition
* Show caption before mouse movement
The following properties are not applied to all caption items
if this option is selected:
* Text and text properties (bold, center, and so on)
* Time
Granted, it does not explicitly say that the callout pointer
direction will not be changed, but as it is not listed among the
attributes that ARE changed, I believe that's a pretty decent hint.
Personally, I believe the issue is one of simply becoming
familiar with the way an application behaves. My guess is that it's
not all that common that someone would want to change all the
caption directions, hence the design. But it's just a guess on my
part.
Cheers... Rick

Unable to view "Properties" for Spartan launch icon.

Build 10049 ... minor nit ... glitch
When I right-click on the pinned Spartan Quick Launch icon, I seen the normal three choices:
Project Spartan
Unpin this program
Close this window.
However, when I right-click on the top choice (Project Spartan), the expected "Properties" doesn't appear, but only the "Unpin" and "Open". That is different from pretty much every other shortcut I have experience with. On my
10049 Build, 21 of 22 Quick Launch icons can display "Properties" .... Spartan being the lone exception.
As Expected?
I was able to create Desktop icons for Spartan.exe with the "New Shortcut" mechanism, and also the "Drag from File Explorer to the Desktop". For those shortcuts, Properties was easily available.
More oddness: None of the files Spartan.exe or Spartan*.exe would actually start Spartan. When I did try to launch Spartan_broker.exe, I got an error message about "Cannot verify digital signature".
And more oddness ... when I clicked the "Submit" button for the above edit, Spartan crashed, with a new entry in the "Event Viewer". Fortunately, the contents weren't lost. Whew.
Rather than add to this post, I started a new Post:
https://social.technet.microsoft.com/Forums/en-US/c7e566ec-2620-4a9c-afdf-9d8f2f702a72/spartan-crashed-when-attempting-to-submit-edit-to-technet-post?forum=WinPreview2014General

Build 10049 ... minor nit ... glitch
When I right-click on the pinned Spartan Quick Launch icon, I seen the normal three choices:
Project Spartan
Unpin this program
Close this window.
However, when I right-click on the top choice (Project Spartan), the expected "Properties" doesn't appear, but only the "Unpin" and "Open". That is different from pretty much every other shortcut I have experience with. On my
10049 Build, 21 of 22 Quick Launch icons can display "Properties" .... Spartan being the lone exception.
As Expected?
More oddness: None of the files Spartan.exe or Spartan*.exe would actually start Spartan. When I did try to launch Spartan_broker.exe, I got an error message about "Cannot verify digital signature".
Hi,
I have the same result as your in my Windows 10 Technical preview, this is the default design for Spartan, and seems this design remains in the latest 10061, please submit a feedback in Spartan about this.
Thanks for your report.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to set Display Only for some records in CAT2 Worklist

Hi,
I have a requirement to modify an attributes for some records in the Worklist of CAT2.
We have an external system where we book our time. Weekly we import data from that external system into CATSDB using BAPI for every single employee.
We would like when the user wants to modify his time sheet to be able to add/modify all records except those which were imported from the external system. Which means that those records should be in Display only mode / grayed out / before release.
Is there any user exit or BADI that could help to modify that attribute and that will be triggered before displaying the Worklist ?
Please advise !
Thanks,
Stefan

I've solved the problem.
First I've added customer field in CI_CATSDB structure and when I am importing the data I am populating that field with 'X', which means that this is record from the external application.
I've created enhancement implementation in Function group->CATS, screen->2003 MODULE->D2000_MODIFY_LOOP, subroutine->modify_d2000_loop where I am checking the field mentioned above if it is 'X' I am modifying the screnn-output = off.
It works, thak you for your help.
Regards,
Stefan

0FISCPER Attribute Display Properties for F4 Help

Similar Messages

Maybe you are looking for