0FISCPER Restriction in Query Designer

Hi All,
We are on BI 7.0 -- SP 17 .
Issue: When 0FISCPER is restricted in Query Designer it shows only one value (Period 00 0000 ) as opposed to values in Master data values. We went to SP 10 to 17 recently and since then this issue croped up. Any thoughts will be appreciated.
Tasks taken care:
1.Transfered global settings from Source system T009 table is consistent.
thanks
Mr.BI

Mr. BI,
Did you resolve the issue?
The problem exists with filter value selection based on " Values in Master data table" .
When the setting is changd in Info object mantenance to "Only values in Info provider" you can see values for Fiscal year/peiod.
Jaya
Edited by: Jaya Mogali on Jul 11, 2008 9:00 PM

Similar Messages

Restricting the Query Design Mode Toolbar in BEx

Hello,
Query Design Mode toolbar is available to Citrix users when using the BEx Analyser. THe client would like this switched off in the workbooks so users cannot see the make-up of the query. Does anyone one know who to carry this out?
Thanks,
Hema
Edited by: Hema Bharti on Jul 30, 2008 2:36 PM

Hi Hema,
To answer your question:
From query design toolbar, I do not see how you can see the make up of a query.
The design toolbar has been introduced to be able to make changes to the query as users need and save them for personal in Favorites or if they have authorization into roles.
As lomg as they do not have access to query designer, they cannot see make up of query.
There is no authorization to disable design toolbar.

Grouping of Char Restrictions in Query Designer

Hi
Can you please update me on how can i achieve this at report level (Quesry Designer)
Lets assume i had a Char Product which had 26 different values as Master data.
Key: A,B,C.....Z
In the report i need to group those values,Line
North should display A,B,C,D
South should display EFGH
WEST Should display IJKL
other should display the remaining all other products
Can i achieve this in Query Designer
Thanks

Hi,
As per your requirement i can suggest you a way:
1. Create as the structure as per your requirement: NORTH, SOUTH, EAST, WEST, OTHERS
2. Then select the key figures and in the display properties; select the "hide (can be shown)"
3, there you won't get the column heading. then you can describe your own column heading.
PS: But you can do this only in BEx analyzer (in the workbooks). You cannot do this in the Web reports.
Regards,
Ravi Kanth

Text value is not getting displayed in Query designer !!

Dear experts..,
i have created a new query in query designer using my info provider and then selected one field in default value and then trying to restrict that particular field while selecting the restriction in query designer am getting the exact text value but after generating the report instead of text value , key value is getting displayed....so how can i get text instead of key value??
please help me friends....
i have posted in OSS mesage also...i got a reply like...even i didnt understand his reply too...what he is trying to say?
whether can i get text display or not???
can any one help me in this regard???
SAP Reply----
Hello kumar,
After another analysis I have to inform you about general concept of
"compounded characteristics".
A compounded characteristic bounds two characteristics. The technical
name is generated by both technical names of the two characteristics
combined by two underlines "__".
An individual text is only available for one single combination of both
characteristics.
Example:
=======
Compounded characteristic "Famous family name" is a combination of
characteristic "COUNTRY" & "ETHNIC". Technical name: COUNTRY__ETHNIC
Values for Country: USA, Australia
Values for Ethnic: Asian, Latino
Possible value combinations with individual text:
USA & Asian; text: "Ling"
USA & Latino; text: "Sanchez"
Australia & Asian; text: "Chu"
Australia & Latino; text: "Garcia"
(Keep in mind the individual text only valid for the specific
combination.)
In analogy to the issue that you reported, you want to restrict this
compounded characteristic. In the window where you select the restrictedvalue (called Selector) you'll see on the left hand side all available
combinations of the characters with an individual text.
You select family name "Chu" and drag'n'drop it to the right side.
Actually you can only restrict the right compounded characteristic. In
our example you would restrict on characteristic "ETHNIC" with value
"Asian". (When you switch on technical names this comes more clear). Thetext "Chu" is displayed in the context of Selector because you selected
value combination Australia & Asian. But in the end it's just a
placeholder(!) for any combination of characteristic "ETHNIC" and value
#Asian#; in our example it could be USA & Asian "Ling" or Australia &
Asian "Chu").
By leaving the Selector the individual text is gone because now the
context is lost between the two characteristics. You have just a
restriction on characteristic "ETHNIC" with value "Asian". An individualtext can't be displayed because the compounded characteristic is not
specified for this restriction.
You're right, it is confusing when "loosing" the text of a restriction.
But accoring to the concepts of the compounded characteristics it
is a correct behavior.

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

Formula Evaluation in Query Designer

Hi
In query designer I have Complex formula which is having lot of variables.
My users are saying some values are incorrect in report output
Can any one help how can we find the value is calculated in report output for this formula.
Thanks
Sudhakar.

Hi Sudhakar,
One more way which you can try to find out how the particular Key Figure is been calculated in query designer is as given below:
1) Go to RSRT
2) execute your query with option for Query Display As "List"
3) You will get the query output
4) In this screen, you will get the button "Key Figure Definition" on the top
5) Click on this button and there will be a pop up screen to select "Structure Element 1" and "Structure Element 2"
6) Here for "Structure Element 1" please select the KeyFigure name for which you want to see the calcuation
7) and click on the "Continue" (Here its blue colored icon)
8) After this you will get a screen showing KF value that is calculated by query
9) Drill down the key figure to see "Fixed Fliter" which will show the data selection used to calculate this value. These are nothing but the global filters defined in query
10) Drill down the KF to see the dynamic filter values i.e. selections with which this KF is restricted in query designer
With above analysis you can easily trace out how the particular KF is calculated in query designer.
Regards,
Geetanjali

Creating Restrictions in BEx query designer for (1-a), where a is variable.

Dear All,
>> Suppose for the variable in the BEx query designer, I've created restriction for 0FISCPER to the variable 0P_PER (as 0P_PER-1) by right clicking 0P_PER3, from that a dialog box appears. In that I've selected 0P_PER3 and then clicked on offset variable and when I set the offset variable, it works for (0P_PER-1.etc, 0P_PER+1,etc..)
But if I want to have (1-0P_PER), then plz tell me how to define this restriction?
Plz explain me the steps to perform (1-0P_PER) restriction in BEx query designer in BW1.
I'm using SAP BI 7.2 gui.
Expecting your reply soon,
with Regards,
Jerald

My requirement is that I want to have " 1-fiscal year"., But this I could not define using offset variables, since using offset we can define "fiscal year +1" or "fiscal year -1".
So there would be some other way to define "1-fiscalyear". So Please help me to define "1-fiscalyear" by giving me the steps.
Thank you,
with Regards,
Jerald

Exception in BEX Query Designer 7.10 when restricting dataprovider in filte

Hello,
when I build a query in the Query Designer 7.10 and try to restrict the infoprovider in the filter
to access a mulitprovider I get the exception:
"Unhandled exception has occurred in your application.....
Index was out of range........"
Our System:
Windows XP Servicepack 2
.Net 2.0 Serivcepack 1
Office 2003
SAP GUI 7.10 Patchlevel 9
BI Addon + Serivcepack 7
BW 3.5 Addon + Servicepack 4
Netweaver 7.00 packagelevel 11
Has anybody seen the same erro or a oss note which fixes this problem?
Thanks.
Regards, Lars.

Hi,
I have not encountered this problem in the last days. We have made an upgrade
in the support package level from 11 to 16 for Netweaver Basis and 12 to 18 for
Netweaver BI. Sometimes there can arise problems when the support package level
of the Application Server is to low in comparision to the SAP GUI.
Maybe this was the problem. I am not sure.
I would advise you to install the latest upgrades of your SAP GUI and keep the application
server on a high support package level.
Sorry, I can't give any other hint.
Regards, Lars.

Char restriction in Bex Query Designer

Hi Gurus,
Can anyone explain what is the use of the Characteristic Restriction Area in in the BEx Query designer
If i set 0CALYEAR =2008 in the Char Restriction and in the column definition i set the one of the column to display data from year 2009. Will it work ?
Please advice
Thank you
BR

There are two type of characterstic restrcitions in the query. Global and local.
If you are createing a restrcited key figure or selection and restricting calday then it will be restricted to that particular key figure (and show 2008 data) and in the columns it will show you other years data (i.e. 2009 data).
But if you are using a global fiter in the filter tab of query designer, then it will be applicable to the whole query.

Query Designer restricted key figures using a prompt value

Hallo Experts,
I would like to restrict key figures after user has beeen prompted to enter a date. I have 2 key figures:
a) KF1, Date1
b) KF2, Date2
User should be prompted to select a specific date: e.g. 01/2011. After selecting/entering the prompted date value, it should be given to date objects for intance Date1=01/2011 and Date2=01/2011.
How could I achieve it in Query Designer without using customer_exit function? Reason is that non-experienced users will use this report and they should not be confronted with complex query. Do you have any idea?
Many thanks
Mamadu

Hi,
I assume that you need to restrict the value of keyfigures by date based on user input data on variable selection screen.
First create one user input variable on your date field say for eg calday.
Now restrict your KF1 with calday and choose that vairable which you created.
For second KF2 which seems to me need to be restricted with offset of +1 based on the date entered by the user.
So restrict this KF2 with calday and use the same variable with offset of +1
I just misunderstood you ned calmonth or day because in requirement you have given month but you are calling it as date.
If its month then replace calday with calmonth..
Hope it helps.
Regards,
AL:
Edited by: AL1112 on Dec 21, 2011 9:42 AM

How to restrict the attribute values for the user in query designer

Hi All,
I have a requirment where certain user would see certain vailes in the query desiner of the attribute.
The requirment is we have planing material which is attribute of material
When X user want to restrict the values for planning material ,where he is able to see all the planning material.But who is not authorized for all the value.
Ex: X user has authorization for see planning material 100,101,102. of material But when he try to restrict the planning material in query designer where is getting all values of planing material.
Or
is there way to blank the restriction help.so that he can't able to see values while restricting
Please some one can advise me on it..

Hi,
Let me sum up:
you have an object ZPLNMAT for the planning material
you have the object 0MATERIAL for material and this object has ZPLNMAT as attribute.
If you can restrict in the query designer, I suppose this attribute is then as navigationnal and also added in the multi-provider.
The object ZPLNMAT is checked as relevant for authorization, and you set up a role with the attached values of ZPLNMAT this user should have access to.
Are you sure the users are restricting on the ZPLNMAT object and not 0MATERIAL, because you should have everything now
PY

How to copy restricted key figures in query designer ?

hi,
i have created a query in query designer (BI 7.0).
How can i copy existing restricted key figures ? i can't find anything. i always have to create a new one, and then i have to do all the things like 'details of selection' etc.... manually. that CANNOT be, there MUST be a way to copy those key figures.
any ideas ?
best regards, Martin

Hi Martin,
Restricted key figures can be stored on the infoprovider basis . For which right click on the key figure (left hand side pane ), Select the necessary key figure and assign the restriction through characteristics combination, and give it a restriction and save it . Next tiem when you create query on the same info provider it should appear in the left hand side as readymade reusable piece .
Hope that helps.
Regards
Mr Kapadia

Query Designer 3.5 does not respond when trying to restrict a charact

Hello experts!
I'm trying to restrict characteristic 0BPARTNER in query designer 3.5 but when I try to open the restrict context menu it tries to bring all the business partners to display them from master data and it freezes. We have over 2 millon business partner data in our MD.
I've already tried performing statistics over the MD tables but it's still not working. Any suggestions that might help me are kindly wanted.
Thanks,
Regards,
Salvador.

Hello Salvador,
I don't know if this is what you really need, but you can check and get a better performance in BEx queries by using t-code RSRT in section Properties there you can set ...
Read Mode
Req. Status
Cache Mode
Optimization Mode
Statistic Det.
among others. I hope this helps.
Regards!
Bernardo

Restrict the values in the Query Designer

Hi Gurus,
I want to Restrict PLANT or SALES ORG values in the Query Designer, in the Query, PLANT has selected in the rows and having variable and SALES ORG is display attribute of the PLANT. In this scenario How can we Restrict the values?
Thanks in Advance,
Ravi.

Hi Ravi,
You cannot restrict values on the display attributes. Better change it to navigational attribute and check the box as navigational in the cube.
Regards
Ram

Query designer: copy restricted kf

Hello gurus.
I have created a restricted kf on query designer, and now i wanted to copy this kf, modify it and save as a new one. I try to do this, but query designer does not have save as option.
Could anyone help me on this?
Thanks in advance,
Vitor

try transaction RSZC
in that it will let u copy restricted keyfigure, calculated keyfigure etc.
log in to bw system
enter RSZC
enter source and target
choose option restricted key figure
hit okey
make ur selection on ur way ahead...
assign points if this helps even a little bit
Edited by: kartikey on Jan 10, 2008 11:22 AM

Restricting infoobject in query designer with authorization object

Hi,
We have to restrict CUSTOMER infoobject with a authorization object in query designer.
How to do this task ? Request kindly suggest.

thr RSSECADMIN tcode. Search with this key word you will get good docs & Wikis in SDN
bhaskar

0FISCPER Restriction in Query Designer

Similar Messages

Maybe you are looking for