0FISCPER  wrong in business content virtual infocube 0FIGL_VC01

Dear all
I would be greatful to get some help on the following: 
We use the standard SAP Business Content for SAP FI, which includes Infocube 0FIGL_C01 and Virtual Infocube 0FIGL_VC1. The data is stored physically in infocube 0FIGL_C01. The virtual infocube 0FIGL_VC1 however gets its data from a function module (RS_BCT_FIGL_DATA_GET_VC1 I believe, but I'm not sure), which reads the data from the mentioned physical infocube and appends some content.
In the source system, we recently changed from Fiscal Year Variant K2 to K4. In order to avoid issues in BW, I deleted all data and did a complete reload from the source system. All the historical data in all cubes, DSOs and PSAs is now on K4.
My issue is now the following: If I do a variable for 0FISCPER on a report on 0FIGL_C01, it shows me the masterdata as expected. If I do the same variable for 0FISCPER on a report on 0FIGL_VC1 (the virtual cube), it shows me 3 times period 000.2005, 2 times period 001.2005 etc. In fact, each period is shown two or three times.
I believe the function module from the business content is still reading some FiscYearPeriods for K2 as well. Does anyone know how I could fix this?
any help is appreciated
Josef

Hi,
After changing from K2 to K4 in Source System, you should have done Transfer Global Settings from RSA1 in BI system.
Check the Fiscal Year Variant Settings in SPRO in BI System. Only K4 should be checked here.
Regards,
Suman

Similar Messages

  • List of business content infocubes for SD

    Hello all,
    I need some help with analyzing enquiries from SD module. Can anybody send me the links to some resources where I can find list of business content SD Infocubes? Is there any infocube for the said purpose? Or are there any infoobjects that can be added to a standard infocube to get this functionality? Please guide.
    Thanks and regards,
    Sumit

    Hi,
    http://help.sap.com/saphelp_nw04/helpdata/en/ea/581e3b33561f2ee10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/6f/3de73f2dc6f106e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ea/581e3b33561f2ee10000000a11402f/frameset.htm
    Thanks
    Reddy

  • Error in Business Content Installation

    Hi Guru's,
    I am trying to install the Business Content object InfoCube    0FIAA_C04 where the steps i followed are:
    goto RSORBCT >Infoprovider by infoarea >find 0FIAA_C04 >grouping >In dataflow before & After >Collection Mode >Start Manual Collection > drag and drop 0FIAA_C04.
    After this i am getting list of error message at the bottom in RED as follows:
    Object 0ASSET_ATTR_TEXT (3.x InfoSource,ISTD) could not be collected for object FI-AA-IO (Application,APCO)
    Object '0ASSET_ATTR_TEXT' (ISTD) of type '3.x InfoSource' is not available in version 'D'
    and so on for other objects also related to 3.x
    please throw some light as to how we need to install 0FIAA_C04 without any errors and collect the objects related to 3.x infosource also.
    if you have any document on this pls forward it to skd1982 gmail
    Thanks,
    Sujeet

    Hai i assume your in BI 7 try to collect the cube independently i mean only necessary objects for cube and then try to install also see to that all infoobjects in cube are installed if missing collect those independently and move.
    Then install datasource with dataflow before .when collecting see those objects which are necessary and then tick it installation ..
    Goodluck.

  • Treasury Business content

    Hi SDN,
    I have to create BI reports based on Treasury module - Cash management, Liquidity planning
    I have installed business content DS, Infocubes and loaded data from R/3. But I am not seeing any relevant data required for reporting. And also I don't see data coming into Liquidity planning cube at all.
    Do we have to create generic DS to get required results? If that is the case, why do we have these Business content anyway?
    Did anyone work on Treasury module; can someone please guide me on this?
    Thanks,
    Dev

    Hi Kumar,
    when you say, "I am not seeing any relevant data required for reporting" do you mean no data is loading to cube or you are not seeing data in reports?
    If there is records loaded to cube, please check the data in Listcube transaction and run the reports for the time period or any other filters you may have on the report, matching the data in Listcube.
    For Liquidity planning data, please check the RSA3 transaction in ECC to make sure you have data in ECC.
    Good luck,
    vijay
    Edited by: Vijay krishnan on Jul 16, 2010 4:48 PM

  • How to activate datasource from business content

    Hi all
    please let me know the procedure to activate the datasources(r/3) for objects delivered from the business content(ex infocube, update rules, infosources,....) all delevered from the businss content...
    suppose if we create our own infocube we define
    1.maintain datasource in r/3
    2.replicate that in bw system
    3.and further process
    let me know how we do this when we transfer objects from d version to a version in business content
    thanx and regards
    Balaraj.B

    chk this:
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
    Thanks,
    raj

  • Error in Activating the Business Content Infocube 0CRM_C08

    Hi Experts,
    when iam trying to activating the business content infocube 0CRM_C08
    iam getting few errors
    Error-1:- Characteristic 0COUNTY_CDE is still being used as target of transfer rule ZCOUNTY_TEXT
    Error-2:- Char. 0CRM_OBTYP3 is exclusively an attribute (cannot be a navigation attribute)
    Error-3:- Authorization field CRM_SALORG still being used in authorization objects
    Error-4:- Cannot delete authorization field of InfoObject 0CRM_SALORG
    Error-5:- InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BB) of characteristic 0MATERIA
    Can anyone please clarify regarding these kind of errors.
    What i have to do for make a successfull activation
    Thanks in Advance
    ARUN

    Hi Raj,
    I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
    In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
    While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
    ASSIGN_LENGTH_0 " "
    SAPLSNR3 or "LSNR3F01"
    LOCAL_BUFFER
    please treat this as urgent.
    Thanks
    Prabhakar.

  • Unable to Activate Infocube from Business Content BI 7.0

    Hi,
    While activating an infocube from the business content I am getting the error "OBJECTS_OBJREF_NOT_ASSIGNED"."The current ABAP program "CL_RSD_IOBJ_VERS==============CP" had to be
    terminated because it has come across a statement that unfortunately cannot be executed."
    This is applicable to all the cubes .I am working in BI 7.0.Could you please let me know incase you have come across a similar error.
    Thanks in advance.
    Best Regards,
    Dushaynt.

    Thanks a lot,
    As i have tried that same before i check your reply and i got solved problem as you have mentioned here.
    Now i can active any cubes,
    thanks.
    I still see some error related to OPAK jobs,related to infopackage while activating the cube.Have u ever encountered the same ?
    Best Regards,
    dushyant.

  • Objects don't exits in business content  (Infocube 0SD_C03)

    Hello,
    I have a problem. I tried to activate the business content in the RSA1 for the infocube 0SD_c03, and it says that there isn't some objects in the metdata repository.
    What can I do???
    I have a NetWeaver 7.0
    SP:
    SAP_BASIS 13
    SAP_ABAP 13
    SAP_BW  14
    SEM_BW 602  0
    BI_CONT 703  8
    FINBASIS 602  0
    Do I forget something????
    Best Regards...
    Pablo Mortera.

    hi
    can u list out the object.does it start with 0DB_* ,then just ignore it and install.Check the source sytem u have checked while collectig the infocube.
    Regards
    Dina

  • Standard Business Content infocubes, dso for QM-Module

    hi
    Can anyone give me the "What Are the Standard Business Content InfoCubes and DSO" for QM -module.
    My client wants some standard business content objects for QM-Module.
    So please help me
    kumar

    hi,
    check out the following link. hope this help you. all infocubes in QM
    http://help.sap.com/saphelp_nw70/helpdata/en/b1/91823b6a86975fe10000000a11402f/frameset.htm
    regards
    harikrishna N

  • FI Business Content Infocubes

    Hi,
    I want to know which Infocubes in Business content are used for FI, CO, MM and SD typically in companies. I cannot get this realtime info from documentation..Please help.
    Thanks,
    Lalita
    Message was edited by: Lalita S

    these are the important cubes available in business content for sd and mm. depends on the requirement of the company they will use the cubes
    http://help.sap.com/bp_biv335/BI_EN/html/bw.htm
    SD
    http://help.sap.com/bp_biv335/BI_EN/html/BW/SalesAnalysis.htm
    InfoCubes
    Quotations / Orders (technical name OSD_C05)
    Service Level - Order Quantities (technical name: 0SD_C11)
    Service Level: Order Items (technical name: 0SD_C12)
    Service Level: Orders (technical name: 0SD_C13)
    Backorders (technical name: 0SD_C14)
    Sales Overview (technical name: 0SD_C03)
    MM-Purchasing
    http://help.sap.com/bp_biv335/BI_EN/html/BW/PurchAnal.htm
    InfoCubes
    Purchasing Data (technical name: 0PUR _C01)
    Vendor Evaluation (technical name: 0PUR_C02)
    Purchasing Groups (technical name: 0PUR_C04)

  • Modification of business content infocube

    Hi,
    Suppose the requirement needs one more field in the business content infocube 0PA_C01. Do I need to change the infocube or copy this infocube to another and make the appropriate changes in the new one. If I modify 0PA_C01 what will be the upgrade implications.
    Please let me know.
    Bill

    Hi,
    Yes, i did
    Refer
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCHR/CAARCHR.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFADM-PA/CAGTFADM-PA.pdf
    Also refer
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/174b9990-0201-0010-2abe-86a515869fbe
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4930fe9e-0501-0010-4998-e5de1456183c
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7e3f9990-0201-0010-9a97-e971112aa2b2
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b27b019f-0501-0010-97b3-9a86dcab255a
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e1cba990-0201-0010-43ae-af579aee7a73
    Thanks

  • Problem in Installing/ Activating 0SD_C03 Infocube from Business Content

    Hello Friends,
    I am installing an InfoCube 0SD_C03 from Business Content in our BW Development environmant. I first installed "Only the Necessary Components". This took 3 hrs. AFterwards I picked "Before Option" and it kept running for 14 hrs, without completeing. In the last I stopped it to minimize the performance impact to anybody.
    My question is, do you also face any such problem of installation running for hours and hours? How have you handled its resolution.
    Finally, I broken my task into various component and I am installing component by component (e.g. Transfer Rule, Update Riles etc. etc.). But while doing so, human errors are possible and I may miss something. Also we would not like the same activation runs for hours in Production.. So there
    Could you share some of your rich experience and possible resolution. Thanks for your help.
    Gabeesh Mishra
    [email protected]

    Friends,
    Necessary components took 2-3 hrs. I am running "before option" this weekend and will find out Monday. Running on weekend will not impact anybody.
    I am communicating with Basis Team and they are aware of this problem.
    In my previous organization, even Before Option will complete in 2 hrs (maximum). I guess there are multiple factors for jobs running so slow. Of course, I am following all rules of the Game!!
    Thanks,

  • Infocube 0PS_C01 not available in BW Business Content& query 0PS_C02_Q0005

    Hi
    In Project systems module, the Infocube 0PS_C01 not available in BW Business Content& also queries relevant to the infocube are alos not available.
    how to get the relevant infocube. Please let me know.

    Hi,
    Check the relevant Datasource for your Infocube in help.sap.com. Install from RSA5 and RSA6 in ECC side.
    Replicate in BW and Install your Cube from BI content.
    Actually you can check your cube in Meta data repository.
    Regards,
    Suman

  • Load data from R3 to BI for a business content infocube

    Hello
    How can I create infopackages and DTP to load the data from R3 to BI(PSA) and PSA to Info Cube?
    and what are the neccesary infopackages for infocube 0PT_C01?
    Thank ypu

    Hi
    While installing business content for info cube, select grouping as indataflow before.
    http://help.sap.com/saphelp_em70/helpdata/en/c2/a5cfa183be443b8184aec085cf9a85/frameset.htm
    In the above link you will get all the business content related personal time management.
    Please refer the below link for Cube business content instalation.
    http://www.google.co.in/url?sa=t&rct=j&q=0pt_c01%20info%20cube%20in%20sap%20bi&source=web&cd=4&ved=0CEUQFjAD&url=http%3A%2F%2Fhelp.sap.com%2Fbp_bw370%2FBBLibrary%2Fdocumentation%2FD13_BB_ConfigGuide_EN_DE.doc&ei=veM0T-yHL8zIrQeIrqG6Dw&usg=AFQjCNHenO_2pi4VeEMXztFpLZUqwRGbpA&sig2=ZMKgnoHQnloljqermoF_GA
    Regards,
    Venkatesh

  • Editing Business content infocubes and transfer structure

    Please till me how to edit the installed business content cube , update rules and transfer structure.Once installed means where we can see the installed cube.

    HI
    bala
    if you are activating a sd cube it will be visible in sd info area.
    but if you want to see it in your own created info area
    you have to drag and drop in your info area.
    then you will be able to see it there.
    hope this helps

Maybe you are looking for

  • Ipod not recognised by computer or i-tunes,

    My Ipod ran out of battery and now it won't reset or turn on. It's not recognised by my computer or i-tunes. I think its died can someone please help me try and bring it back to life. Any suggestions will be welcome thanks.

  • SRM "one-client" installation on ECC 6.0 EhP: Own client needed for SRM?

    Hello experts, i've a question concerning the SRM "one-client" installation on ECC 6.0 EhP4 as Add-On. Is it possible to use SRM and ERP funtionality in a single client e.g. 001? Or do we have to use different clients on the system like for SUS? I ha

  • Exception Handling - sendEmail

    Hi, i'm trying to find out how the sendEmail service works. it has an exception handling included which I've tried to test, but in case of a malformed emailaddress the process stops, I don't want to stop, I want to set an other action in case of this

  • VA03 -  VBAP- CHARG - Text change from Batch to Charge

    HI SD Experts, I got one issue as the text for this field VBAP-CHARG change from Batch to Charge , i think there is no such request from user or my team to change this text, but some how its was change. Is there any way i can revert to change this te

  • Issue in Material Master custom tab

    Hi Experts, I have developed a tab in material master using SPRO -> IMG-> Logistics General -> Material Master -> Configuring Material Master -> Define Structure of Data Screens for Each Screen Sequence . Its called Costing3. While executing mm03 and