0GL_ACCOUNT. hierarchy extraction from R/3

Dear experts,
I don't know how to extract hierarchies from R/3 into BW.
I need to extract the hierarchy for the characteristic Account Number, which represents the insurance Balancesheet structure (VKIA)
What DataSource may I use? is anything useful within the BC?
Til now, I created 2 datasources (attr and text), which brought the master data from tables SKA1, SKB1, SKAT into BW's infoobject 0GL_ACCOUNT, but the hierarchies issue still remains, and I don't know how to proceed..
Could you tell a bit the steps? (i'm a novice...)
Have a nice day, and thanks in advance.
jordi

To find relevant data source for your master data info object, go to RSA1 -- business content-- select data flow before and drag you info object it will show all relevant data source for that.
Once u know your data sources, go to source system, activate them replicate and so on in BW/BI.
Do not create unnecessary objects in R/3 or BI just check for business content before you create Z objects.
Hope this helps,
Assgn pts if helpful,
Regards
Edited by: chintamani deshmukh on Apr 23, 2008 1:35 PM

Similar Messages

  • Reg : Hierarchy extraction from Source

    Hello Friends,
    I have an issue with Hiearchy Extraction.
    I am trying to Load 0WBS_ELEMT ( Hiearchy) data (Full Update) for the first time.Its displaying the following error.(Its extracted from SAP R/3)
    Diagnosis
        The hierarchy level of the parent node must be one larger than the
        hierarchy level of the actual node. This is not the case for the node
        with ID 00075558 and its parent node with ID 00000001 .
    System response
    Procedure
        Correct the hierarchy level of the node or of the parent node in your
        source system.
    Procedure for System Administration
    Can any of you who encountered the similar issue share your valuable experience with me please ...
    Kind Regards,
    Sai Gautam Pusala

    Its resolved/
    Thanks,
    Sai Gautam
    Edited by: Sai Gautam Pusala on Oct 21, 2011 2:14 PM

  • Hierarchy extraction from R/3 Table to BW

    Hi Gurus/All,
    I need extract the Organizations  Hierarchy  Structure data from R/3 "Z table".Please any one can  give me  the detailed steps to extract the Hierarchy data from R/3 "z table" in to Bw.It is Masterdata extraction and the hierarchy has 5 levels.
    Please send me the links or detailed steps to extract in to Bw hierarchy from R/3 "Ztable".Also I would like to know the settings/Must do's on R/3 side.It is urgent
    regards
    Prasad

    Hi Shailaja,
    http://www.bwexpertonline.com/archive/Volume_03_(2005)/Issue_08_(September)/V3I8A2.cfm?session=
    I have tried to open above mentioned link, but itz not gettting there.
    Can you send me the article to my email: [email protected]
    Thanks to you,
    Rafi

  • Hierarchy extract from R3 to BI not successful

    Hi,
    We are in the process of extracting 0ACCOUNT hierarchy from R3. Any of the hierarchies cannot be pulled.
    BI receives 4 info Idocs with one indicating of no of data records to be pulled.
    But, never getting a data package.
    RSA3 shows records. It has only 1586 records.
    Other extractions except for hierarchies are working fine.
    Following is the background job log in R3:
    Step 001 started (program SBIE0001, variant &0000000006432, user ID ALEREMOTEBID
    Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
    DATASOURCE = 0ACCOUNT_0109_HIER
             Current Values for Selected Profile Parameters               *
    abap/heap_area_nondia......... 2000683008                              *
    abap/heap_area_total.......... 2000683008                              *
    abap/heaplimit................ 40894464                                *
    zcsa/installed_languages...... ED                                      *
    zcsa/system_language.......... E                                       *
    ztta/max_memreq_MB............ 2047                                    *
    ztta/roll_area................ 3000320                                 *
    ztta/roll_extension........... 2000683008                              *
    BEGIN BW_BTE_CALL_BW204040_E 5,009 2,011
    END BW_BTE_CALL_BW204040_E 5,009 2,011
    BEGIN EXIT_SAPLRSAP_004 5,009 2,011
    END EXIT_SAPLRSAP_004 5,009 2,011
    Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
    IDOC: Info IDoc 2, IDoc No. 279049, Duration 00:00:00
    IDoc: Start = 12.08.2009 14:36:50, End = 12.08.2009 14:36:50
    Asynchronous transmission of info IDoc 3 in task 0003 (1 parallel tasks)
    IDOC: Info IDoc 3, IDoc No. 279050, Duration 00:00:00
    IDoc: Start = 12.08.2009 14:36:55, End = 12.08.2009 14:36:55
    Synchronized transmission of info IDoc 4 (1 parallel tasks)
    IDOC: Info IDoc 4, IDoc No. 279051, Duration 00:00:00
    IDoc: Start = 12.08.2009 14:36:55, End = 12.08.2009 14:36:55
    Job finished
    Thanks in advance,
    Isiri.

    Hi Gary,
    The data flow is correctly enabled. The data packeges doesnot arrive BI at all. ( Not coming to PSA ).
    Could not track using BD87 command. Data package is not getting generated in R3. But info idoc says of data availability.
    Checked job log of R3. It doesn't indicate of generating data packages. Couldn't find any error message as well.
    Following is the message from extraction node of BI monitor.
    "Data packet 000001 had 15876 records selected for it"
    But, with this messsage, the node is red, which has been timeout. Kept running for the whole day.
    It should have come within seconds.
    Thanks,
    Isiri.

  • Cost Center hierarchy extraction errors

    Hi,
    I'm trying to extract R3 Cost center hierarchies into BW and in doing so, I get following errors. Could some one shed some light on these errors.
    Extraction (messages):Errors occured
    Error occured in the data selection
    But, I successfully extracted Cost center master data from R3 just before hierarchy extraction.
    I also checked RSA3 for the hierachy that I'm trying and it pulled around 2000 records in R/3 datasource extractor.
    Appreciate any help
    Hari Immadi
    http://immadi.com
    SEM BW Analyst

    Hi,
    Thanks for your reply.
    I replicated the datasource before starting the extraction & also I double cheked the hierarchy name between BW & R3.
    I don't get any other useful messages in the log & here is the entire log.
    Requests : Everything OK
    Extraction : Errors occured     --> Errors occured in the data selection
    Trasnfer IDOCS & TRFC :     Everything OK
    Processing (data packet)     :     No data
    Subseq processing          :     Missing messages
    Soon after execution of extraction, I get ALE Inbox error as follows & I double cheked that hierarchy in R/3 is not being edited.
    Express document "Check Load from InfoSource 0COSTCENTER" received from author " Warehouse background user"
    Check Load from InfoSource 0COSTCENTER , Packet Cost Center hier test      
    for demo                                                                   
    Please execute the mail for additional information.                        
    Error message from the source system                                       
    Diagnosis                                                                  
    An error occurred in the source system.                                    
    System response                                                            
    An error occurred in Service API .                                         
    Check the error message.                                                   
    Procedure                                                                  
    The procedure for removing errors takes place depending on                 
    the error message:                                                         
    Note                                                                       
    If the source system is a Client Workstation, then it is possible that     
    the file that was to be loaded was being edited at the time of the data    
    request. Make sure that the file is in the specified directory and is      
    not being edited, and restart the request.                                 
    Note: If you not wish to receive any mails, maintain transaction           
    RSMONMAIL.                                                                 
    Hari Immadi
    http://immadi.com
    SEM BW Analyst

  • HIERARCHY load from R/3 does not complete

    Hi there gurus,
    I am trying to load the 0GL_ACCOUNT hierarchy master data, but it never finishes. The attributes and text loaded successfully. We have already successfully installed the BC on R/3, then replicated it in BW, then installed the BC in BW. The master data loads fine into the PSA, but from the PSA, it just sits in yellow status and then finally times out.
    Any ideas please?
    Thx
    Charl

    Hi Charl,
         Can u just check the hierarchy for 0GL_ACCOUNT characteristic and compare it with R/3 hierarchy . If both are identical then you can manually turn it to green status.
    Regards,
    Prakash B

  • Hierarchy Extraction using Open hub Destination

    Hi,
    I need to extract hierarchy data for Application code(YAPPLCD) using OHD. In the Hierarchy there are 4 components(Industry, Market, Application Group and Application Code). i need to get all the 3 details for the Application Code(i.e to which Indusrty does it belong, Market and Application Group).But HIerarchy table is having one record for each apllication code, Market, Application Group, Application code.
    How to get relevant data for the application code?
    My file format should be:
    Appl.Code | Appl.Group | Market | Industry.

    Hi Suma...
    The SAP Open Hub service enables you to distribute data from an SAP BI/BW system into external data marts, analytical applications, and other applications. With this, you can ensure controlled distribution using several systems. The central object for the export of data is the InfoSpoke. Using this, you can define the object from which the data comes and into which target it is transferred, leveraging SQL Server Integration Services (SSIS) as the transfer/transform mechanism. 
    SAP BI objects such as InfoCubes, ODS objects, or InfoObjects can act as open hub data sources. You can select database tables or flat files as open hub destinations, and then use those destinations as actual sources within SSIS.  To automate the extraction using SAPu2019s Open Hub Service, youu2019ll need to setup a process chain. Note that both a full and delta modes are also available as the extraction mode.
    As stated already with direct extraction from SAP R/3, once data is extracted out of SAP NetWeaver® BI (SAP BW), the destination of that data could be any relational database (such as SQL Server), and then reports (from SSRS) and multi-dimensional cubes (from SSAS) can be created from that database data.  The resulting SQL Server reports/cubes could then be used within the Microsoft Business Intelligence delivery mechanisms, such as through Excel, SharePoint, PerformancePoint, etc.
    Hope this below link may helpful
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c08b1f70-6fb1-2b10-97a5-df4c503e03cb
    Regards
    Sudheer

  • Activating and using 0CUSTOMER Hierarchy extraction in R3

    Dear Expert,
    Could anybody explain me about Activating and using 0CUSTOMER Hierarchy extraction in R3 and then extract to BW systems from R3 in step by step?
    Points will be assign granted
    Regards
    Sanjiv

    You can load Hierarchies (sets) from R/3 in the same as other Master Data. Just you need to create Hierarchy DataSource using Tcode BW07. Where you have to give the name of the table and field on which you created Hierarchy iin R/3.
    Also there are many standard avilable datasources also for hierarchy for which you can load Hierarchy Directly.
    Here are the step by step procedures:
    Hi,
    If you are using standard infoobject and you want to load r3 hierachy you dont have to configure any additional thing in order to load it in BW.
    The Steps are:
    1)Activate the hierarcie datasource in R3
    2)Replicate it in BW
    3)Assign the datasource for an Infosource, and make sure you select the hierarchie datasource.
    4)Active the Infosource
    5)Create Infopackage
    6)Select the desire hierachie in the infopackage(if you dont see it, click on Available Hierarchies from OLTP and select it)
    Regards
    Asigns point if useful please
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6729e07211d2acb80000e829fbfe/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/3d/320e3d89195c59e10000000a114084/frameset.htm
    Re: Hierarchies

  • COPA Hierarchy Extraction / How to create

    Dear Gurus,
    I have a doubt and would like to know if the hierarchy extraction in copa (Tables CE1XXX) is different from the other hierarchies?
    Could you please give the steps how to create them in ECC and in BW?
    Thank you

    HI Gilo,
    Check the below given thread,
    [COPA - Customer Hierarchy;
    Regards,
    Durgesh.

  • Extraction from 0HR_PY_1 error??????? pls respond immediately

    i would need to extract data for payroll data from data source 0HR_PY_1 to BW based on the period of time say for example 01.2007 to 12.2007, the infopackage in Production is in full load i would need to initalise it to Delta. for this, i can first run full load for the period 01.2007 to 12.2007 then go for init of delta without data transfer and delta will be intialized and then select the radio button delta and go for delta extractions. this is what i need to do now.
    for this i have extracted data from 0HR_PY_1 from R/3 to BW in full load, but in after extracting more than one crore records were extracted with a failure(red color status), it says that data is not extracted from correct client which seems to be wrong because only one client is maintained for R/3 Production and in RSA3 i could see no record for that data source, i wonder how those many records were extracted from ????.
    and i also see the error saying "No assignment of payroll data to BW month". it is giving this error while extracting for the year 2007 but for the year 2006,2005 full load is done and it has not thrown such error.
    do you think Assignment of payroll data to BW is compulsory, because i could see no assignment in R/3, if that is not done then how could 2006, 2005 years of data been extracted and when they are extracted i am not sure when and how they were extracted.

    Hi,
    Take a look on the notes:  585682,590957
    With rgds,
    Anil Kumar Sharma .P

  • How to delete the Hierarchy data from Infoobjects.

    How to delete the Hierarchy data from Infoobjects. In my case I had 300 records in the corresponding table of info object.
    When i was trying to delete the hierarchy data, I am getting error message. "Some master data not deleted". Can any one tell me to delete all these records by using a program.

    Hi
    Go to SE11 and enter the hierarchy table name.
    /BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
    Thanks
    TG

  • How to read the hierarchy data from the same table using loop in AMDP method

    Hi All,
    We have a requirement to get the top partner from BUT050 table.
    Here the Top parent is nothing but the top most in the hierarchy of the partners from BUT050.
    Example:
    For partner 1234 (BUT050-PARTNER1) there is partner 3523(BUT050-PARTNER2) one level above
    For partner 3523(BUT050-PARTNER1)  there is partner 4544 (BUT050-PARTNER2) last level .
    so in this case for the partner 1234 the Top parent is 4544 .
    I have created AMDP Procedure method to get the top-parnet and below given is the logic implemented in AMDP method.
    Here i have implemented a recursive logic with the WHILE loop to get the top most hierarchy partner from the same table BUT050
    IV_Parent is the input partner and ev_top_parent is the output value.
    AMDP Procedure Method:
        DECLARE lv_date VARCHAR(8) := TO_VARCHAR (current_date, 'YYYYMMDD');
        DECLARE found INT := 1;
              iv_partner1 =  SELECT partner1 FROM but050
                              WHERE partner2 = iv_partner
                              AND reltyp = :iv_hierarchy
                              AND date_to >=  :lv_date
                              AND date_from <= :lv_date;
         WHILE found <> 0  do
           select partner1 into ev_top_parent from :iv_partner1;
                           iv_partner1 =  SELECT partner1 FROM but050
                           WHERE partner2 in ( select partner1 from :iv_partner1 where partner1 is not null)
                           AND reltyp = 'ZBP004'
                           AND date_to >= :lv_date
                           AND date_from <= :lv_date;
           select COUNT ( partner1 ) INTO found FROM :IV_PARTNER1;
        END WHILE;
    This method is working fine, but here it is only taking one single partner and getting the top parent as output.
    Now i would like to convert this mehtod so as to accept n number of partners (not one single partner) as input and should process each partner to get the top parent.
    Could anyone guide me how can i handle the given AMDP method further so as to work some how it is within another loop from other AMDP method.
    Thanks.
    Regards,
    Laxman.P

    Hi
    Go to SE11 and enter the hierarchy table name.
    /BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
    Thanks
    TG

  • Error while extraction from R3 : URGENT

    While extracting from R/3 generic datasource(extracted through function module ) i am getting error as :
    <b>Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the</b>
    <u>But when I am running the FM or the extractor checker it is giving actual records with our any error</u>
    Could you please help me what to do ?
    No job log in job overview , only it is given <b>Cancelled</b>.

    Some possibilities:
    1. Replicate the data source and then try loading.
    2. Check the RFC connection ; may be it is broken.
    3. Check the update rules to see it is active.
    Ravi Thothadri

  • Short dump error when extracting from one of the datasource in R/3 to BW

    When extracting from one of the datasource I am getting the short dump. below is the source code of the same.
    Source code extract
    Get boundaries of next TID block
    L_FROM_INDEX = L_TO_INDEX + 1.
    IF L_FROM_INDEX GT NFILL.  EXIT.  ENDIF.
    L_TO_INDEX   = L_TO_INDEX + L_BLOCK_SIZE.
    IF L_TO_INDEX GT NFILL.
      L_TO_INDEX = NFILL.
      L_BLOCK_SIZE = L_TO_INDEX - L_FROM_INDEX + 1.
    ENDIF.
    Create hashed index on TID of TID table
    CLEAR L_TH_TID_IDX.
    LOOP AT TIDTAB FROM L_FROM_INDEX TO L_TO_INDEX.
      L_S_TID_IDX-TIDIX = SY-TABIX.
      L_S_TID_IDX-TID   = TIDTAB-TID.
      COLLECT L_S_TID_IDX INTO L_TH_TID_IDX.
    ENDLOOP.
    Select TID block from STATE table
    SELECT * INTO TABLE L_T_STATE
           FROM ARFCSSTATE FOR ALL ENTRIES IN L_TH_TID_IDX
           WHERE ARFCIPID   EQ L_TH_TID_IDX-TID-ARFCIPID
             AND ARFCPID    EQ L_TH_TID_IDX-TID-ARFCPID
             AND ARFCTIME   EQ L_TH_TID_IDX-TID-ARFCTIME
             AND ARFCTIDCNT EQ L_TH_TID_IDX-TID-ARFCTIDCNT
           ORDER BY PRIMARY KEY.
    Consistence check
    DESCRIBE TABLE L_T_STATE LINES L_LINES.
    IF L_LINES NE L_BLOCK_SIZE OR
       L_LINES EQ 0.
      MESSAGE X097(SY).
    ENDIF.
    PERFORM DELETE_BATCH_JOB
            USING    L_T_STATE
            CHANGING L_S_TID1.
    Update LUW-Status und Zeit
    CLEAR L_T_STATE_IDX.
    CLEAR L_TH_TID2_IDX.
    CLEAR L_T_TID.
    LOOP AT L_T_STATE INTO L_S_STATE.
      L_S_STATE_IDX-TABIX = SY-TABIX.

    Hi Pavan,
                     This is a table space error.
    Regards,
    rahul

  • TS3694 when doing a restore to try and solve a wifi problem with my iphone 5 i got past the point where the software was extracted from my phone but then an error message came up saying that the phone could not be restored because of an unknown error (301

    when attempting a restore,  as suggested, to try and fix a week wifi signal on my iphone 5 I got past the point where the sopftware was extracted from my phone but then an error message appeared saying that the phone could not be restored becase of an unknown error (3014). I have tried about 20 times to make it work after trying a number of suggestions I have seen online. My phone gives me know response accept showing a picture of the cable and the itunes symble an the screen permanently - please help

    Hello JD_NINJA,
    Thanks for using Apple Support Communities.
    Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device.  To troubleshoot this issue please follow the directions below.
    Check your security software
    Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
    Get help with iOS update and restore errors - Apple Support
    When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
    Restore your device from an iCloud or iTunes backup - Apple Support
    Take care,
    Alex H.

Maybe you are looking for