0GLACCEXT HIERARCHY NOT DISPLAYING IN REPORT

HI ALL
we have used virtual cube 0figl_v10 for our report in order to get the 0glaccext hierarchy
we have loaded the hierarchy and we see it is fine when seen through maintain hierarchies
but when in bex report we are not able to seee the hierarchical display of the kf values
we have loaded the hierarchy with idoc mode is it right or should we load in psa..
however we see the hierarchy display is fine..
but the problem is at the report level.
we have activated hierarchy in the 0glaccext properties in query designer
any suggestion
thanks & regards
krishna

Hi,
we have activated hierarchy in the 0glaccext properties in query designer--Have you selected the hierarchy name over from drop down
Regards,
Satya.

Similar Messages

  • Text data is not displaying at Report level for an Infoobject Item name

    Hi All,
    Texts data is maintained at Info object level but text information is not displaying at Report level for an object.  I have set the property at query level as "Text", but at report level it is displaying key values of the object, not displaying texts information.  This problem occured in QA(Quality) system but not replicated in Production system.  I have checked all properties at backend and query level and compared the same between QA and Production system didn't find any difference.
    Please suggest what might be the cause: at report level it is displaying key values instead of the textual information even text data is mainintained at backend.  In production it is displaying textal data for the IO.
    Thanks in advance.

    Hi All,
    Thanks for your valuable information.  I have changed the setting under Advanced tab as "Master data" for Access type for results values, but didn't solved the problem still it showing key information for the IO.
    In Production system the report displaying texts information for the IO, but in QA its displaying key information. The problem exits only in QA, its working fine in DEv and Production.
    As per my understanding might be the issue with Patches will be checking with Basis team on the same.
    Please suggest if you have any alternatives to fix the issue.

  • Font not displaying on Reports Output (RHEL 5) for 10g

    Hi, I know I've posted a question in the past about a font not displaying on Report Output for my Arial, Arial Narrow, and Courier New fonts. I worked with Oracle Support and found that Metalink Note#261879.1 fixed my problem with those 3 fonts. I ran the scripts and now that part works great.
    However, I have one font "ARIALUNI.TTF" that will not work. This is out specific barcode font we use. I've pushed it on Linux from my Windows by pushing it as a binary file to the ORACLE_HOME/guicommon/tk/admin/TTF directory. I even put it in the directory for TTF on Metalink Notoe 261829.1 and let it create the files, but it still doesn't find it when I ran a report that uses this font.
    I tried using font subsetting via the uiprint.ali and make a reference but it still doesn't seem to work.
    Is there something I'm missing that would cause any of these not to work. I thought maybe some files had to be created under the guicommon/tk/admin/AFM file directory but I'm not sure.
    I just want to have my 2 or 3 reports that use this barcode to work. Once I get them, I'm done and all my font issues are resolved. Any help is appreciated.
    Chris

    They are probably a very old Type 1 font. Try checking the dates on the font files. Your best bet would be to get the OpenType versions of those fonts and install them.

  • Value not displaying in report whereas it returns in plsql developer

    HI

    Duplicate post.
    value not displaying in report whereas it returns in plsql developer
    value not displaying in report whereas it returns in plsql developer

  • Formula not displaying in report

    Hi ,
    I have used the NODIM data function in my formula and now the report is not displaying the formula column in report in first screen. I have to select the filter value from structure.
    I have already made the formula as Always show , still its not displaying.
    I have tried creating the  CKF and that too is not displaying in report in first screen. I always have to select it from filter.
    What could be the reason..? Are there any query setting I am missing..?
    When I use the KF , it is displaying properly.
    Please help.

    HI,
                  AS YOU SAID U R CREATING FORMULA USING NODIM FUNCTION  IF U R CREATING AT INFOPROVIDER LEVEL THAT IS CALULATED KEY FIGURE , AFTER CREATING CKF U  JUST DRAG CREATED CKF TO COLUMNS AREA AND SAVE AND EXECUTE, ITS DISPLAYS THE KEYFIGURES. U ARE JUST CREATING FORMULA FOR KEYFIGURE NOT  CHARACTERISTIC SO NOT THOUGHT OF FILTERS.
    HOPE THIS HELPS .
    Regards,
    supriya.

  • AFTER LOADING THE DATA INTO THE INFOCUBE IT SHOULD NOT DISPLAY IN REPORTING

    Hi experts,
                     I have the data in infocube. When i selected the cube in reporting it should not display i.e; the data should not display in reporting.
    thanks nd regards,
    venkat

    Bit strange requirement. But if you have data in Cube and automatically its will be available for Reporting. unlike ODS, we do not have option of "Automatic request activation".
    However on repoeting side, you can restrict the values to #  and exclude everything from slection. But not good solution as such.
    Regards
    Pankaj

  • Complete data not displayed in Report

    Hi forum,
    I have a cube based on data source 0FI_AR_4,which is updated via an ODS.I have created a query for ageging analysis.The query uses Referrence number ( invoice number) to display the receivables of various customers and number of days from due date.
    To my surprise many invoice numbers are not being displayed in the query, but when i restrict the query to the invoice numbers which are not being displayed the report generated is able to display all the doccuments.
    I have checked the data in the cube and all the invoice numbers are flowing well fro R/3.
    My only way of saying thanks to the people who solve the issue or provide helpful answers is by assigining points.
    Regds
    Suhel

    hello
    This is simple problem
    The result the query fetches is not able to display in the number of cells provided in the excel sheet
    So when you restrict the data, the query is able to show all the data fetched by accomadating in the columns available in the excel.
    Here in your case , there are not enough columns in the excel sheet to display all data
    Regards
    N Ganesh

  • CRVS2010 beta - Date field from database does not display in report

    Hi there - can someone please help?!
    I am getting a problem where a date field from the database does not display in the report viewer (It displays on my dev machine, but not on the client machines...details given below)
    I upgraded to VS 2010
    I am using the CRVS2010 Beta
    My development machine is Windows 7 - and so is my fellow developer's
    We are using Microsoft SQL Server 2000
    We run the queries within VS and then we send the data table to VS using .SetDataSource
    We have a few reports which display the date on our dev machines (whether we run the EXE or from within Visual Studio)
    When we roll out to the client machines (running Windows XP SP3) then everything works, except that the date does not display (on quite a few reports)
    This is the only real issue I have had - a show stopper for me
    The rest works well - any input will be greatly appreciated
    Regards,
    Ridwan

    Hi Ridwan,
    After much testing I have it all working now using CRDB_adoplus.dll as a data source ( XML )
    Alter your Config file to look like this:
    <startup useLegacyV2RuntimeActivationPolicy="true">
    <supportedRuntime version="v4.0"/>
    </startup>
    Then using the code below, and CR requires the Schema to be able to read the date format.
    private void SetToXML_Click(object sender, EventArgs e)
    CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
    ISCDReportClientDocument rcd;
    rcd = rptClientDoc;
    string connString = "Provider=SQLOLEDB;Data Source=dwcb12003;Database=xtreme;User ID=sb;Password=password";
    string sqlString = "Select * From Orders";
    OleDbConnection oleConn = new OleDbConnection(connString);
    OleDbDataAdapter oleAdapter = new OleDbDataAdapter(sqlString, oleConn);
    //OleDbDataAdapter oleAdapter2 = new OleDbDataAdapter(sqlString2, oleConn);
    DataTable dt1 = new DataTable("Orders");
    oleAdapter.Fill(dt1);
    System.Data.DataSet ds = new System.Data.DataSet();
    // We need the schema to get the data formats
    ds.WriteXml("c:
    sc.xml", XmlWriteMode.WriteSchema);
    //Create a new Database Table to replace the reports current table.
    CrystalDecisions.ReportAppServer.DataDefModel.Table boTable = new CrystalDecisions.ReportAppServer.DataDefModel.Table();
    //boMainPropertyBag: These hold the attributes of the tables ConnectionInfo object
    PropertyBag boMainPropertyBag = new PropertyBag();
    //boInnerPropertyBag: These hold the attributes for the QE_LogonProperties
    //In the main property bag (boMainPropertyBag)
    PropertyBag boInnerPropertyBag = new PropertyBag();
    //Set the attributes for the boInnerPropertyBag
    boInnerPropertyBag.Add("File Path ", @"C:\sc.xml");
    boInnerPropertyBag.Add("Internal Connection ID", "{680eee31-a16e-4f48-8efa-8765193dccdd}");
    //Set the attributes for the boMainPropertyBag
    boMainPropertyBag.Add("Database DLL", "crdb_adoplus.dll");
    boMainPropertyBag.Add("QE_DatabaseName", "");
    boMainPropertyBag.Add("QE_DatabaseType", "");
    //Add the QE_LogonProperties we set in the boInnerPropertyBag Object
    boMainPropertyBag.Add("QE_LogonProperties", boInnerPropertyBag);
    boMainPropertyBag.Add("QE_ServerDescription", "NewDataSet");
    boMainPropertyBag.Add("QE_SQLDB", "False");
    boMainPropertyBag.Add("SSO Enabled", "False");
    //Create a new ConnectionInfo object
    CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo boConnectionInfo =
    new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
    //Pass the database properties to a connection info object
    boConnectionInfo.Attributes = boMainPropertyBag;
    //Set the connection kind
    boConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;
    //*EDIT* Set the User Name and Password if required.
    boConnectionInfo.UserName = "";
    boConnectionInfo.Password = "";
    //Pass the connection information to the table
    boTable.ConnectionInfo = boConnectionInfo;
    //Get the Database Tables Collection for your report
    CrystalDecisions.ReportAppServer.DataDefModel.Tables boTables;
    boTables = rptClientDoc.DatabaseController.Database.Tables;
    //For each table in the report:
    // - Set the Table Name properties.
    // - Set the table location in the report to use the new modified table
    boTable.Name = "Orders";
    boTable.QualifiedName = "Orders";
    boTable.Alias = "Orders";
    rptClientDoc.DatabaseController.SetTableLocation(boTables[0], boTable);
    //Verify the database after adding substituting the new table.
    //To ensure that the table updates properly when adding Command tables or Stored Procedures.
    rptClientDoc.VerifyDatabase();
    MessageBox.Show("Data Source Set", "RAS", MessageBoxButtons.OK, MessageBoxIcon.Information);
    Thanks again
    Don

  • Can not display BI report in Web ui

    I created reporting profile with both bi and interactive reporting active and assigned to the business role functional profile
    I gave the BI connection client in the report that I wanted. When I select the report in webu ui, it's taking me to a sign on pad. I assume this for BI sign on pad and When i enter sign on, it's not taking me any where.
    This just a standard report in CRM My top 5 quotations. All necessary steps in basic bi connection, basic sales analytics are done too
    How does the the connection between BI and crm works?
    Please advise

    Hi Experts,
    We are using Webiu 2007 with BI 7. 
    We linked our sandbox to RWT system to test the report output. In my CRS, I have source system RWT defined and the same way in BI also we have assigned CRS to link these systems together. It is my understanding that when we select the report, we are just calling the from BI into CRM.  I have done the following steps in CRM
    1) Created reporting profile in CRM analytics as both BI and CRM interactive reporting activated
    2) Assigned this reporting profile to business role
    3) I selected My-Top-5 quotation report and gave the BI system in display  bi reports
    4) I can see the report on webui.
    Problem: When I selected the report,  a logon pad appears and I enter RWT user id and password, it's doing nothing.  But, I have another user who is logging in for the first time got an error "Error loading template "OTPLB_OCRM_QUTO_Q0001_1 notification number BRAIN276". When the same new user tried to login second or third time, it's not showing the error and nothing is happening when we enter userid and pass word.  But, we can logon to GUI RWT.
    We tried to pull a query view report and web template reports see if we can display data. The BI team gave me couple of info objects keys. 
    1) I created the report with object key and type as one for 3.x template and one for 3.x query view
    2) Created logical links for these two reports and selected these two reports in business role. Now the reports are showing in webui
    3) When I select any of these, it taking to a blank screen without any logon screen. 
    BW team says that these reports are running with data in their system.
    Can someone please help?

  • Few values of report column do not display in report while applying filter

    Post Author: anuragg11
    CA Forum: WebIntelligence Reporting
    There are 6 drill filters applied on the report to filter out the report column data. Few values of the report are not displaying in the report when using drill filter. Same issue is with report filter too. If filters are removed then values are appearing in the report. We are using version BO XI R2 & Java runtime JRE 1.4v. It doesn't look issue is with Java version because only few specific data of the report column are not shown in the report when using filter on the data. Example: One of Report data column contains below values: 24.2, 26.9, 120.1, 230, 274.9, 275.8, 333.2 Report is displaying all these values when there is no filter on any data. But report doesn't display data when applying filter on 274.9 or 120.1 howver filter on other values 24.2, 26.9, 230, 275.8, 333.2 are working fine.

    Hello,
    I think i know what your problem is.
    Although in table view your 2 requests combine perfectly and show separate results in pivot view BI unfortunaterly adds them up.
    One work around would be to go in your criteria add in each request a dummy column. This can be obtained the following way:
    1. click on a column to add it in the criteria (it doesnt matter which one)
    2. go into the edit formula of that column
    3. delete the formula and in its place write 'Dummy Column 1'
    Do the same for the second request by adding a "Dummy Column 2'
    Now the Pivot Table should also show up correctly
    Let me know if it goes well or if you have any further questions,
    Kostis

  • Data not displaying  the report (Help me out Urgent)

    Hi Folks,
    When i am executing the query and web reports for the date 27/11/2007 & 28/11/2007 am not getting the data its saying "No applicable data found"
    But i can see the data  in the  ODS for those dates.
    Report is working fine till 26/11/2007.
    But when the user is trying to check the reports for the above mentioned dates its not displaying.
    Even in checked it the RSRT as well but the same case over there the data is not displaying.
    Its bit urgent as its month end user wants to see the reports.
    Any help or any clue will be great helpfull and appreciated.
    Urs,
    RK
    *****Points Committed

    HI Suchitra,
    <i>First check out how many records are there in the ODS as on 27th and 28th</i>
    There are totally 750 & 427 records on 27th and 28th.
    <i>At the time of executing the query,are using giving any variable entries?</i>
    Yes we are using variables entires like PO Date & PO number we usually check  the reports giving the date in  PO Date variable,
    Any other clue please?
    Urs,
    RK.

  • Report not display in report viewer

    i try to show ssrsc reports in asp.net web page using report viewer
    code
    protected void Button1_Click(object sender, EventArgs e)
    ReportViewer2.ProcessingMode = Microsoft.Reporting.WebForms.ProcessingMode.Remote;
    ReportViewer2.ServerReport.ReportServerUrl = new Uri("http://lenovo-pc/ReportServer");
    ReportViewer2.ServerReport.ReportPath = "/Report Project1/Report1";
    ReportViewer2.ServerReport.Refresh();
    where is the probelm... and why report not display?

    Hello,
    In SSRS, the issue is occurred when the credential of the datasource is configured with “Prompt for credentials”. Please check if you configured the credential with "Stored Credential" of the datasource. You can refer to the following steps:
    Click the black arrow of the report, select Security option.
    Click Data Sources in the left pane.
    1) If it is a "A custom data source”, please check the item "Credentials stored securely in the report server", and type the valid username and password. If the user is a Windows Account, you need to check item "Use as Windows credentials when connecting
    to the data source".
    2) If it is a "A shared data source", please remember the path, and then open the data source from the Report Manager.  Make sure the credential type is "Credentials stored securely in the report server".
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • Pie chart value not displaying in report builder

    Hi,
    I created a report by using report builder i used a pie chart in my report but one value is showing other one is not showing. Kindly tell me what is the problem behind it?
    here is an image which is not displaying 1 value in pie chart. please help me

    Hi Aamir,
    Please check if there is any misconfiguration (e.g. show data label, formatting, etc.) for your chart slice per the following post.
    http://social.technet.microsoft.com/Forums/en-US/ebc3bfc5-6338-4946-ade6-64e89611f6b7/ssrs-report-builder-30-pie-chart?forum=sqldatawarehousing
    http://msdn.microsoft.com/en-us/library/dd220469.aspx
    Further more, you can post this topic in SQL server forum for a better assistance.
    http://social.technet.microsoft.com/Forums/en-US/home?forum=sqlreportingservices%2Csqldatawarehousing%2Csqlanalysisservices&filter=alltypes&sort=lastpostdesc
    Thanks
    Daniel Yang
    TechNet Community Support

  • Hierarchy not working at report

    Hi
    I have created level based hierarchy in RPD on one dimension table, but hierarchy is not working in report level.
    Can any one help.
    Thanks

    Hi
    Actually we are not getting any error message.
    But when we have enabled hierarchy on particular column, when we are using that column in report it should be getting some under line when we place cursor on that column data and when we click on one of the specified data we might be getting data related to that particular data. But it is not happening like that and we are able to see data as normal column data. This is my issue.
    Please suggest
    Thanks

  • Hierarchy Node display in report designer

    Hi,
    Urgent please help me out.
    I have an issue with report designer. I created a static report in Query designer with 2 structures. When i try to include this query in Report designer, only the last level nodes are getting into the Report designer. All the above level nodes are not featuring in Report designer.
    Please help me how to make these top nodes visible in Report Designer.
    Points are assured for each reply

    thanks Ajeet ,
    But this is regarding Report Designer where i create appliction which is based on the WAD or Bex Query . Do we have any setting in Report designer where we can check the selection input which user has given while execution of the report.
    Thnks . please advice.
    Regards

Maybe you are looking for