0GR_VAL_PD KF has not mapped with source in 0Pur_C01 but value comes
HI All
I have problem with 0GR_VAL_PD kf in 0PUR_C01 cube. 0GR_VAL_PD KF has not mapped with source in 0Pur_C01 but in report level, value is coming for purchase organisation,material group .
But GR value as at posting date (0GR_VAL_PD)value not coming for particular material group or purch. org. but some days before, values were coming for particular material group or purch. org..
so need your help.
Thanks n Regards,
Gaurav Sekhri
Edited by: gaurav sekhri on Aug 18, 2010 11:41 AM
Edited by: gaurav sekhri on Aug 18, 2010 11:43 AM
Hi Susan
Which datasource you are using at present. Normally 0PUR_C01 gets loaded from 2LIS_02_ITM and 2LIS_02_SCL. The keyfigure that you have mentioned will come from 2LIS_02_SCL with the code that you have written.
The code that you have written should work. Please check if the code is in the transformation from 2LIS_02_SCL.
Share the details on why do you think the solution didn't work.
Regards
Karthik
Similar Messages
-
0GR_VAL has not mapped with source in 0Pur_C01
Hello,
how can I fill the key figure 0GR_VAL (were input value)? Which data source I need?
My solution at the moment doesn't works.
Thanks for your help.Hi Susan
Which datasource you are using at present. Normally 0PUR_C01 gets loaded from 2LIS_02_ITM and 2LIS_02_SCL. The keyfigure that you have mentioned will come from 2LIS_02_SCL with the code that you have written.
The code that you have written should work. Please check if the code is in the transformation from 2LIS_02_SCL.
Share the details on why do you think the solution didn't work.
Regards
Karthik -
Macbook pro is not working with Canon pixma iP1500 but has previously. Printer works with an old PC but macbook shows "printer is offline". Any clues?
Hello Betty7,
Please let me take a moment to say "Welcome" to the HP Forums.
I hope you enjoy your experience!
I see that you are having an issue with getting the printer reinstalled.
I suggest that we start off by running the HP Print and Scan Doctor. If the Doctor fails, please let me know where it fails as well as any error codes it may generate.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
New computer has been loaded with old Itunes library but a number of purchases prior to 9/18/08 are not "authorized" when I try to play them.
They are all items I purchased from Itunes but they won't play any longer even though they show in my Itunes library.
Doesn't work when I enter account info and password either.
This is only about 5% of my library and many purchased items play no problem.
Any help would be appreciated.Two words, Migration Assistant. It will transfer files between two Macs using a firewire cable automagically.
http://www.apple.com/pro/tips/migration.html
Three words, Target Disk Mode. Use a firewire cable to connect two Macs and then hold down the T key when you boot the Mac you want to transfer files from, G4 Tower. It will appear as a hard drive on the desktop of your Macbook Pro. Then you can just drag and drop the whole folder.
http://docs.info.apple.com/article.html?artnum=58583
Message was edited by: Jon Thornburg -
Device has not synchronized with DOE
Hi Experts,
We have NW mobile 7.10 SP8 installed.
Created a device type LAPTOP.
After installing NW Mobile client 7.1 setup08 (and MaxDB) and entering Synchronization settings (connection),
I still see "Device has not synchronized with DOE" in mobile device administration.
How do I sychronize device with DOE ??
I don't see any option after logging in to mobile client.Hi,
The hostname and port of which DOE box you have entered in your Synchronization settings (connection), you need to enter the password for the correspoding user of that DOE box.
Say the user name which u have created in your client is XYZ, the same user should be present in your DOE and the (synchronization) password has to be that of ur DOE user (login) password.
Regards,
Pramod
Edited by: Pramod M on Nov 25, 2009 8:12 AM -
need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any ideas? Is this now customer service or does adobe have a customer service team . Site not user friendly. Thanks
Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive? -
My iPhone has not downloaded from the iCloud properly but I have added more stuff since can I back up
Regarding the first question, the following gives details on what should be done with a phone being transferred to someone else: http://support.apple.com/kb/ht5661
-
Safari could not open the page on my new ipad mini's because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work fine. Yesterday I got it to work. Weird. Can you please help me. I've tried everything. Thanks ya'll!
Hello SavannahSweetie,
I was looking into the issue you are desribing, and found a great article for troubleshooting wifi connections with iOS devices. It's called iOS: Troubleshooting Wi-Fi networks and connections and can be found here: http://support.apple.com/kb/ts1398.
Start with this section, and work your way down if needed.
Basic troubleshooting
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
Verify that you are in range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
All the best,
Sterling -
Why iPhone 5 not charge with its own charger but will with iPhone 4 charger
why iPhone 5 not charge with its own charger but will with iPhone 4 charger. Thanks to the member who posted that fix.
It sounds to me like the charger that came with the iPhone 5 is defective, or the cable is if you've been switching the cables when you switch the chargers.
Regards. -
genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge - went to Apple in Milton keynes to get a replacement charger this weekend that does not work as well!
Well, if this problems is so old I think it is strange that Apple hasen't fixed the bug long time ago, and certainly after the release of iOS 8.1.
Well, thank you very much for your answer, Lawrence Finch. I think the best thing to do is to send the phone to repair, if there is no solution to fix this by my self. I will anyway call the Apple support tomorrow, but I don't think they will illuminate me... -
my iphone is shutting down and not working with my pc.. but when i plug it to the wall it turns on. and off when i unplugged it.. i tried to reboot but nothing happens.. pls help..
The problem is your friend's music does not belong to you. It is owned by your friend.
I'm afraid you cannot do what you are trying to do. Restoring the iPhone is what you would have to do.
In the future, put your music on the computer and transfer it to the iPhone, not the other way. -
Bluetooth audio will not connec with OS 4 upgrade, but work well with OS 3
The bluetooth with the OS 4 upgrade will not connect with my car stereo, but OS 3 worked well. The iPhone will connect with the bluetooth handsfree connect with the stereo, but not the audio. In short, I am no longer able to listen to the iPhone's iPod music, or use the navigation app through my stereo. Frustrating... I have done a soft and hard reset, as well as talk with 'Crutchfield' regarding the problem. The problem presents to be an issues with OS 4. What solutions are available?
I'm having this problem also. Bluetooth audio works fine with my motorola headset or phone "hands free" connection to my ford exployer but does not work with ipod function nor navigation app. Since this is my first iPhone, I don't know if everything worked with OS3.
-
We are having characteristics keyfigures in SAP BW.We have to identify these fields in R/3 i.e. source fields and source tables.But we are unable to match some keyfigures and characteristics in R/3.What approach we have do.Mean if we are unable to find some characteristics and keyfigures in R/3 what we have to do and how to we mapping?what extraction we have to take?what approach we have to do
Hi Sam and Ramesh,
These reports are coming to Portal via Bw only.
And we dont have access other client (X client) BW systems and they are not giving design document also.They are giving only R/3 sytem copy and we are able to see reports in web based portal.Based on Portal reports we identified Characteristics and Keyfigures.And some characteristics and keyfigures we are mapped with R/3 source fields and Source tables.And these are not standard reports and all are custom report.And there is no use of businee content.Based on these information we have to develop reports from scratch mean from starting i.e. identifying KFs and char's and mapping fields with R/3 here I have doubt we are unable to map some fields with R/3 what we have to do?what approach we have to take.How we identify datasource.what extractor method we have to follow.
Please give ur suggestions.What we have to approach -
FDMEE/LCM : LCM is merging target server maps with source server maps
Hi,
We would like to copy thanks to LCM our FDMEE application from production to developpement server.
We have done several tests on developpement that we would like to remove.
We need to have production/development environnement AS-IS.
The problem is that LCM is merging taret server location / data load rule / import format / maps with the source one.
We have opened an SR on this subject.
Meanwhile we would like to create a SQL request to clean import format / data load rule / location / maps table within target server before the LCM import.
Is that ok if we delete all records on these following table or could we have an impact ?
- AIF_BALANCE_RULES (Data load rule table)
- TDATAMAP / TDATAMAP_STG /TDATAMAPSEG (maps tables)
- TPOVPARTITION (location table)
- TBHVIMPGROUP; TBHVIMPITEMFILE (import format table)
What do you think ?
Thanks.
Regards,
YohanThat's a comment in the file. It has no effect at all.
-
Eclipse - debug step is not synchronise with source code.
Hi,
I have an web application witch run on tomcat, when Idebug the application, the debug steps are not synchronize with the source code. Same thing when I change the code , after making the jar file and putting it in the WEB-INF/lib of the web application, the modifications didn't take place. It seem that the old code always remains. I looked at the compile class in the jar file and the modifications have been taken in to account.
what can cause this kind of behavior ? I relaunch tomcat many times without succes ?
any help ? thanks a lot.Can it be the case that you compile your JAR optimized, i.e. without debug information? Then your classes are also without debug information.
This sounds very likely as a refresh problem. Be sure that both source files in Eclipse and class files in Tomcat have the same version (e.g. with simple system.out).
Maybe you are looking for
-
Is there any way to use the dictation from the ipad2?
How can I apply the dictation for the Ipad2
-
How can you save data to a spreadsheet and use different worksheets in the spreadsheet?
I am trying to save data to a spreadsheet. Each set of test data needs to be saved under a different worksheet. Is this possible and how can I do it?
-
C6-01 - gps drive app kicks me out after a few sec...
Hi, I got this phone about 2 weeks ago and updated it to the latest of everything via Ovi. A few days ago I used the GPS for the first time and the maps themselves and map location apps work fine but when I click on Drive, it may or may not start to
-
How do you set up study cards within your book?
I've figured out the glossary, but want to add study cards to my book. where is that setting or panel?
-
System error when calling a servlet
Hi All I have a servlet deployed in sap j2ee engine. The servlet actually reads a SOAP message , extracts a file attached with the SOAP message and forwards the file to a RFC. Now from a java class I am attaching a file with the SOAP message and call