0HR_PA_PD_1  Qualification (No data from  R3 SAP ECC 6.0)

Hi Experts,
We are currently testing our extractors with the upgraded R3 (SAP ECC 6.0)
We discovered a strange problem with 0HR_PA_PD_1 Qualification datasource.
No data is loaded to BW.  But when we run the datasource in TC RSA3 in
the source system, there are data returned.
Does anyone of you experience the same problem?  How did you solve it?
Thanks in advance for the help.
Best Regards,
Rose

Enable PSA in BI and load data only to PSA and check if data comes...
Regards

Similar Messages

  • RFC connection from SAP Data services to SAP ECC

    We have data services set up in linux machine. I am trying to set up RFC connection between data services and SAP ECC.
    From data management console after creating RFC connection i am getting "RFC_bad_connection" error message. Username , password, system number, hostname and client is working from SAP GUI and has all the authorizations. SAP  gateway and service is name is correct.
    Did anyone had similar issue and what was the solution. Do we have start the RFC connection from linux data services machine, i didn't see any sh executable to do so.
    Thanks in advance for helping to solve the RFC connection issue.
    Edited by: gupta sasha az on Dec 19, 2011 7:24 PM

    I am new to SAP and we have just started work on Data Services.
    I wanted to know the complete procedure as in how can I establish a connection between Data Services and ECC.
    Thanks for your help and time.

  • Data load into SAP ECC from Non SAP system

    Hi Experts,
    I am very new to BODS and I have want to load historical data from non SAP source system  into SAP R/3 tables like VBAK,VBAP using BODS, Can you please provide steps/documents or guidelines on how to achieve this.
    Regards,
    Monil

    Hi
    In order to load into SAP you have the following options
    1. Use IDocs. There are several standard IDocs in ECC for specific objects (MATMAS for materials, DEBMAS for customers, etc., ) You can generate and send IDocs as messages to the SAP Target using BODS.
    2. Use LSMW programs to load into SAP Target. These programs will require input files generated in specific layouts generated using BODS.
    3. Direct Input - The direct input method is to write ABAP programs targetting on specific tables. This approach is very complex and hence a lot of thought process needs to be applied.
    The OSS Notes supplied in previous messages are all excellent guidance to steer you in the right direction on the choice of load, etc.,
    However, the data load into SAP needs to be object specific. So targetting merely the sales tables will not help as the sales document data held in VBAK and VBAP tables you mentioned are related to Articles. These tables will hold sales document data for already created articles. So if you want to specifically target these tables, then you may need to prepare an LSMW program for the purpose.
    To answer your question on whether it is possible to load objects like Materials, customers, vendors etc using BODS, it is yes you can.
    Below is a standard list of IDocs that you can use for this purpose to load into SAP ECC system from a non SAP system.
    Customer Master - DEBMAS
    Article Master - ARTMAS
    Material Master - MATMAS
    Vendor Master - CREMAS
    Purchase Info Records (PIR) - INFREC
    The list is endless.........
    In order to achieve this, you will need to get the functional design consultants to provide ETL mapping for the legacy data to IDoc target schema and fields (better to ahve sa tech table names and fields too). You should then prepare the data after putting it through the standard check table validations for each object along with any business specific conversion rules and validations applied. Having prepared this data, you can either generate flat file output for load into SAP using LSMW programs or generate IDoc messages to the target SAPsystem.
    If you are going to post IDocs directly into SAP target using BODS, you will need to create a partner profile for BODS to send IDocs and define the IDocs you need as inbound IDocs. There are few more setings like RFC connectivity, authorizations etc, in order for BODS to successfully send IDocs into the SAP Target.
    Do let me know if you need more info on any specific queries or issues you may encounter.
    kind regards
    Raghu

  • Retraction cost center plan data from BPC to ECC

    HI Experts,
    We are integrating BW-BPC.
    The client wants to Retract the data from BPC to ECC System for reporting purposes.
    u201CIn order to be able to calculate standard costs correctly in production plants planning data from BPC is needed in SAP ECC.
    The data needed is the planning data on cost centers which are currently entered into SAP manually via transaction KP06. This data will now be entered into BPC instead and therefore it is required to get an interface between BPC and SAP ECC for transferring data.
    A description of the process and the data needed is available in the section u201CSAP ECC Screen Dumpu201D sectionu201D including screen dumps from ECC
    If this interface is not created the task of entering in the planning data will double as the data must be entered both in BPC and SAP ECC. The process of entering in the data twice I estimate will add 1 u2013 2 extra days of work for each subsidiary involved in this.u201D
    What is the options to support this Business Process of getting data from BPC to SAP ECC.
    Regards
    venu
    Edited by: venu WAD on Aug 19, 2011 7:19 AM
    Edited by: venu WAD on Aug 19, 2011 10:17 AM

    Hi Keyrun:
    Please refer to slide 7 of document below.
    "SAP NetWeaver 7.0 Data Retraction in BI Integrated Planning"
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30af46fb-eb4f-2a10-4899-9167af035742?quicklink=index&overridelayout=true
    >Online documentation: http://help.sap.com/saphelp_sem60ep1/helpdata/en/99/97157967e3440a94d199538959cd0b/frameset.htm
    >See SAP Note 525543 for additional documentation on field mapping.
    Regards,
    Francisco Milán.
    Edited by: Francisco Milan on Jun 22, 2010 8:13 PM

  • Setting required to create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system

    Dear Experts,
    Can you please suggest me list of activities require to automatically  create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system .
    i.e If I create the customer master record and transfer the same CMR to SAP GTS , what are the setting requires to maintain in SAP GTS sytem to automatically create the Business partner .
    Ram

    Hi Raghu,
    Below are the main settings required to enable you to transfer Customer Master Data to SAP GTS. Please note that their is a difference between, Customer Master Record and Customer Master Data in terms of data and for GTS, we transfer Customer Master Data. Hence, below are the settings required:-
    In SAP ECC system:-
    Activate the change pointers for Customer Master Data apart from enabling basic connection settings.
    Schedule a job to run at regular intervals to transfer all the customer master data for the available change pointers to the SAP GTS system
      2.  In SAP GTS system:-
    Maintain the Mapping for ECC Customers to SAP GTS Business Partners in the General settings area of the SPRO in SAP GTS system
    Ensure that the Number range is maintained for those GTS  Business Partners.
    Also, some time you may be required to maintain the organisational structure to ensure full working.
    I hope this will be helpful to you.
    Regards,
    Aman

  • Migrate Closed Sales Data from one SAP system to Other

    Hi,
    We have a requirement to migrate Closed Sales Order data from one SAP System to the New SAP system.
    Please share your thoughts on the considerations / DOs and Donts for such cases.
    Appreciate your response.
    Kind Regards,
    Tanuji

    Hi,
    If you want to migrate closed SOs..then first consider why? and from what date i.e how long back?
    Following are the considerations:
    1) You can't get the creation date same as your previous system dates--this might lead to incorrect reporting. So you'll have to check if its really worth?
    2) You might want to have a reference no somewhere in the new transactions from the previous system.
    3) If you want to migrate the deliveries, invoices then you've to consider also GL migration as well as payments.
    Regards,
    Raghu.

  • How Can we get the data from Non-SAP to SAP in WebDynpro

    Hi,
    I hope u understand my query, How can we get the data from Non-SAP to SAP thru WebDynpro Programming.
    Help out with the steps for getting the data or procedure.
    Regards,
    Mutyapu

    You can expose the APIs in the Non-SAP backend as Web Services, and consume them in SAP by creating an Enterprise Proxy. Then these can be called just like normal class methods from Web Dynpro.
    Regards,
    Nithya

  • How to configure RBE in order to get data from a SAP System

    Dear all,
    I downloaded the last version of RBE in order to install it and evaluate the concept of Reverse Business Engineering.
    After installing it on my laptop, I try to access with no exit. It appears a log on screen.
    Someone can help me by explaining how to set first steps in order to connect with a system?
    Thanks in advance, Xavier

    Hi Gopi,
      Here I enclose the steps for sending data from a SAP R/3 system to Non-SAP R/3 thru ALE.
    Here my Non SAP System is - Web Methods.
    1.Creating LS - 1. SAP R/3 -              S1_800
                             2. web methods LS -  WM_800
    2.  ASSIGN CLIENTS TO LS - S1_800 TO 800
    3.     DEFINE TARGET RFC DESTINATIONS -
        3.1.   TCP/IP Connection  -          RFC DEST NAME -WM_800
                                             Connection Type - T
                                              Applicataion Type - Registered server proggram
                                                    PROGRAM ID - WMB2B1
                                             Gateway Host - Sap Server Name
    4.0.  Model View Name - W_M_V (for sending data to IS)
                                             sender - S1_800
                                            receiver - WM_800
                                            message type - MATMAS
          4.1. Create Partner Profiles.
    5.     Create PORT - TCode - we21
              5.1. For Wem Methods system - WM_PORT
                      RFC Destination Name - WM_800 (created in step 3.1.)
    With Regards
    Vasu

  • Cross reference data from 2 different ecc system.

    Hi Sdners,
    Iam working on a scenario where i have to get data from two different Ecc system,consolidate them and send it back to their respective system.
    But some refernce data in both the systems are different and when iam merging data from 2 system i have to maintain either of the reference data.But problem comes when i syndicate it back to ECC ,it cannot accept a new reference data.
    Please suggest me some answere how to proceed in such case.
    Its urgent.
    Points will be rewarded for Genuine answeres.
    Thanks in advance,
    Regards,
    Neethu.

    Hi,
    First enable keymapping property to YES  for the table which you want to do
    importing and syndicatig.
    Create two remote systems type inbound/outbound .
    Import the data from first remote system and map the corresponding fields.
    Don't forget to map the remotekey field which is on the destination side.Make clone
    of one of the dispaly field and map to the remote key field.
    After importing you can see the records from which remote system are imported
    using Edit Key Mappings option in DataManager.It shows that remotesystem
    name and corresponding remote key.
    Do the same for second remote system too.
    After merging data in data manager , you can see the merged record and see the
    two remote systems names and two remote keys by using Edit Key Mappings
    option so the merged record goes back to both remote systems when you syndicate
    the records.
    Syndicate the data from first remote system by selecting destination properties and
    output remote system property under map properties tab as your first remote
    system.
    Do the mapping for corresponding fields and don't forget to map the value field under
    remote key .Then MDM generates remote keys for only records belongs to your
    first remote system.You can see this in destination preview.It does n't genarate
    remote keys for second remote system.Then check the option Suppress records
    without key under map properties tab and execute the syndication.Finally we can
    see the accurate records.
    Do the same for second remote system too.
    Hope it helps
    Cheers
    Narendra

  • Function Module to send Vendor Master Data from SRM to ECC

    Hi Guys
    I heard there is a function module in SRM which can send Vendor Master Data from SRM to ECC please confirm for me if there is such a function Module and what is it called. Thanks

    Hi,
    Vendor Master data is replicated to SRM from ECC. Standard Transactions (BBPGETVD,..) will be used to replicate the data from ECC.
    Vendor Master will exists in ECC, so there is no point in sending the same back from SRM to ECC. If the requirement is the other way around, we can use the transaction BBPGETVD in SRM system.
    Hope this helps.
    Regards,
    Hemanth

  • Unable to read data from the SAP marketplace

    Hi All,
        These days, certain packages in my download basketball cannot be downloaded, while others can be downloaded normally.
         After serveral redirecting, the SAP download manager keeps informing me that "Unable to read data from the SAP marketplace, check your settings and try again".
         Anyone knows how to solve it?
    Thanks,
    Yining

    Hi Yining,
    You user on SAP MarketPlace is locked.
    You have to unlock it but I do not know the way.
    Check in user data maintenance on SAP MarketPlace who is your responsible and perhaps he wwill be able to solve to unlock our user.
    Regards,
    Ronan

  • Unable to read data from the SAP Service Marketplace issue

    Good morning, experts.
    I´ve just installed the SAP Download Manager, but I can´t get connected to Marketplace.
    First I tried downloading a file I could see in my Basket Download. Then I deleted it from the basket so I could test only the connection. In both situations I got the same error message: "Unable to read data from the SAP Service Marketplace (...)".
    It is probably due to wrong settings, but I can´t figure it out. My settings are:
    Address: https://websmp205.sap-ag.de/
    User name: S0005951541
    Password: (my password)
    Proxy (my proxy settings)
    Any ideas?

    Thanks for your answer.
    I can see my download basket online. I realize I didn´t delete the items so I could test purely the connection. I am going to do it again.
    I found out I dind´t have permission to download those items, and with the right permission I could download them directly online.
    As long as I have more information I am going to repost this issue on a new forum.
    Thanks.

  • Accessing data from other SAP system

    Hi experts
    I need to access data from one SAP system from other.  My requirement is , perform applications (programs) in some SAP system, but using/accessing  data from other SAP system .
    For example, when we press F4 we get the match code (search help) for the field ;  that window is alredy created by SAP and it shows the data for that field . Of course the application (ike any other program/application) read the data from the SAP system is being executing ;  well i need execute that match code but show (taking) the data from other SAP system;  i not refer to other MANDT in same system but other SAP system.
    The communication between SAP1 system and SAP2 system is already created from BASIS.
    My doubt is how can i  execute that standard application (search help) but 'invoke' to standard application this take data from other system ?
    I guess i can create Z search help wich call a Z Function (RFC) to get the data required from the other system ;
    or maybe enhance the standar search help to call that Z RFC ;  but standard application search help is already created and this access the data in several ways or places of code , and this has severals sub-windows and search features ; and i just need execute exactly same search help but accesing data from the other SAP system ; so my doubt is, is there some way to indicate to SAP the applications always (wherever) these applications acces the data do it but from other SAP system, 
    like if we 'redirect' the Data Base to other SAP system. 
    SAP1 applications are being executing  -
    >   but all data (records) are taking from SAP2
    Maybe the first suggestion is simply why do not we execute applications in SAP2 instead SAP1 , that's because the version package in SAP2 system (where we have the data) does not support some (non SAP) applications we need to use.
    Excuse the long thread.  Does somebody can help, any idea ?
    Best Regards
    Frank

    Hi Frank,
    Below are my thoughts, these are only conceptual and haven't had an opportunity to try these possibilities, also not sure if this is the right thing.
    1) Create an entry in DBCON using TCode: DBCO for the Database of system SAP2. Now in the application of SAP1 use the "SET CONNECTION" construct as the very first statement, so that consecutive SQL statements will point at the DB of SAP2.
    2) I have read somewhere that the Work Processes are connected to the Default database and i am not sure if you can change this setting, but if you can and provided you have have multiple application servers in your SAP1 landscape, then pick one of the application servers and change the settings on the WP to point at the DB of SAP2, you have the end users login to this particualr app server.
    3) If there are multiple app servers in SAP1 landscape, then choose one of the app servers and change the default database setting to point at DB of SAP2.
    Regards,
    Chen

  • Migrate PY and TM cluster data from One SAP System to another

    Hi Experts,
    Could you please suggest me some options to migrate PY and TM cluster data from One SAP System to another? My requirement is to move all the cluster data (Active and Inactive ees).
    I see that PU12 is an option. Anybody used that to migrate between SAP systems. Please provide some details
    Points guaranteed
    I see that using PU12 you can export only PCL2 Clutsers. Are there any ways to move the other clusters like PCL4 ?

    Hi,
    As far as data transfer, If have all normal configuration settings in your targeted system you can use LSMW (Use T.code AS91 in LSMW for recording)  to transfer your data in your both cases.
    Hope it resolves your both the issues.
    Regards,
    Murali

  • Copy data from one SAP system to another based on conversion rules

    Hi All,
    Please provide your input on how can we copy data from one SAP system to another based on conversion rules.
    Conversion rule :
    vkrog in 110  vkorrg in 120
    1234            4567   
    <<text removed>>
    Thanks
    Edited by: Matt on Feb 16, 2009 4:35 PM

    Please read the Rules of Engagement here: Please read "The Forum Rules of Engagement" before posting!  HOT NEWS!!
    Please note that offering points is against the rules.
    matt

Maybe you are looking for