0HR_PT_2 shows 0 records in RSA3

hi experts,
We are implementing 0PT_C01 cube for HR Time management.
there are 2 standard data sources are involved in it.
0HR_PT_1
0HR_PT_2
0HR_PT_1 there is data in Dev and Quality systems, but if i check 0HR_PT_2 in RSA3 in Dev and Quality there its showing 0 Records.
but the related infotypes there is data.
Is there any confirurations we have to do to populate data for this data source?
Regards
venuscm
Edited by: venugopal vadlamudi on Aug 16, 2011 11:44 AM

Hi Barry,
Thanks for the response, i have gone through that note and its released in 2000 like 11 years ago.
but still can i implement this note to solve the issue or is there any updated NOTE available for this?
because if i go through the nagivation which shows in the note the nodes are not available.
regards
venuscm
Edited by: venugopal vadlamudi on Aug 16, 2011 12:30 PM

Similar Messages

How to define reporting time types for 0HR_PT_2 to populate records in rsa3

hi experts,
we are implementing Time and Labour and we are using info provider called 0PT_C01.
for that we have 2 data sources one is 0HR_PT_1 and 0HR_PT_2.
when i check in RSA3 there are records for 0HR_PT_1 Data source, but for 0HR_PT_2 data source it shows 0 records though the related info types have data.
i have checked in sdn for the solution, most of the replies are related to maintain Reporting Time Types.
can you please provide me step by step solution to maintain Reporting Time Types in ECC.
Regards
venuscm

Hi Venu,
You can maintain reporting time types in SPRO,
SPRO > Integration with Other SAP Components -> Data Transfer to the SAP Business Information Warehouse -> Settings for Application-Specific DataSources (PI) -> Human Resources -> Actual Employee Times OHR_PT_02 -> Define Reporting Time Types -> Maintain Reporting Time Types
Check with your HR team about maintaining reporting time types.
[http://help.sap.com/saphelp_46c/helpdata/fr/e8/cb2d28e4ded31184080004aca6e0d1/content.htm]
Regards,
Durgesh.

Not able to see all the records thru RSA3.

Hello All,
I am checking 0VALUATION_TEXT extractor on R/3 using RSA3 Tcode.
It is showing only 3 records.
When I am loading this Text Master data through InfoPackage, the records were loaded from R/3 to PSA itself is 6.
Why I am not able to see all the records in RSA3.
Kindly Help me out in this.
Thanks,
Geetha

Hi Geetha,
Check the data, It seems loded data was 3 records for 2 languages.
In RSA3 it is showing 3 records for EN language.
Assign points if it helps...
Regards,
ARK

RSA7 shows zero records for delta upload of 2LIS_03_BF Datasource

Dear Professionals,
I am having constant issues with inventory management DataSource (2LIS_03_BF). I scheduled delta upload in r3 production using LBWE, keeping in mind that in LBWE there is no options for posting dates, ETC... In RSA3, there are records, but when i check RSA7, it is showing 0 records. What could be the problem. Do i need to do anything/activation anywhere in LBWE or RSA7 to see the records. Please advise.

Hi,
Normally there should be a collective run which transfers data from the application-specific queues to the BW delta queue (RSA7), just like this workflow:
MCEX03 queue==> RMBWV03 (Collective run job) ==> RSA7-Delta queue => BW
It is necessary to schedule the job control regularly - see point 3 of SAP Note 505700.
Check also these SAP Notes:
869628     Constant WAITUPDA in SMQ1 and performance optimization
728687     Delta queued: No data in RSA7
527481     tRFC or qRFC calls are not processed
739863    Repairing data in BW
Rgds,
Colum

Extractor Checker shows 0 Records

Hi,
I am working on Transport Management system of supply chain management. In RSA3 of the TMS system I checked for datasource 0TMS_SOR and 0TMS_SRQ. It showed 0 records inspite data being there. Since SCM is based on Business Objects Process Framework I am not able to check for data at table level and I don't know how to go about checking for the existence of data. The TMS developers say there is data in the TMS system but before integration with the BI system I just wanted to check in the Extractor checker with respect to the datasources. It shows 0 records. What could be problem ? How to go about this ?
Kindly help me on this !
Thanks in Advance,
Regards,
Hudson

Fanie, we are working on the same issue.
For SRQ, there are special 'scheduling' conditions that are used in the PPF framework, stating that only SRQ's with a lifecycle status of 'Complete' should be extracted. This logic is embedded in the PPF scheduling conditions with FM "/SCMTMS/CL_IM_SCHD_EXTR_SRQ"
Bottom line - Talk to the developers and ask if there are any SRQs that are 'Complete'. If not, that is why you are not getting any data from your extractor.
Justin

DATASOURCE 0FI_GL_6, i am GETTING '0'RECORDS IN RSA3.

We are trying to extract GL DATA.
I AM USING THE DATASOURCE 0FI_GL_6.WE R GETTING '0'RECORDS IN RSA3.IS THERE ANY SETTING REQUIRED TO GET THE DATA?
we r using R/3 (ECC5 ) AND BW 3.5 ( We are on 2004s )
We decided to go ahead with 0FIGL_C01 cube. , and I believe, the old datasource 0FI_GL_1 is replaced by 0FI_GL_6 with delta capability. And even I see there is new Datastore object 0FIGL_O06.
In my Production System, I check the Table - GLT0.
it is showing NO Table Entries Found.
How come It's ? This is Production System.
am i checking Right Table ( GLT0 )
is there any other settings i have to do, to get the data in GLT0 table
PLZ HELP US THE IN SOLVING THE PROBLEM.
THANKS
JASHAIK.

Hi SJA,
0FI_GL_6 datasource is based on the GLTO (totals table) in R/3. You are right.
I believe, the GLTO table gets populated from the basic entries done in the BSEG and BKPF tables for GL line items.
Check with the FI/CO consultant in the team and see if the config is done on their side to maintain data in GLTO table. If this is not done, then I dont think you can use this datasource. Check with the R/3 folks, if GLTO would be populated in the near future. If not, then you might have to work with 0FI_GL_4 datasource (which brings line item records and only after images, so make sure to use an ODS) and then aggregate the records in the cube as per specific user requirements,
Hope this helps.
Assigning points is a way of saying thanks on SDN!
Regards
Prakash

How to show all records by default on search result page?

Hi
I am trying to make a search page that would execute the search in the database based on one or more field constraints.
(Using MySQL,PHP)
I have 2 columns in the database "vm_ip" (primary key) <IP address>, "Operating_System" <Any, Windows, Solaris, AIX>
need to search vm_ip based on other two fields.
PROBLEM: Need to show all the record when I select "Any" in the Operating_System drop down menu.
<p>Operating System:
    <select name="os_select" id="os_select">
    <?php
$os_count=1;
foreach($os_type as $value) //(os_type is array with possible values of OS)
echo "<option value=".$os_count.">".$value."</option>";
    $os_count++;
?>
      <option value=" " selected="selected">Any</option>
    </select>
</p>
this code POSts NULL value to the search page.
Below code is of recordset on search page
$varOS_virtual = "Operating_System"; // recordset variable set to same as column name (default value)
if (isset($_POST['os_select'])) //this should not be true
$varOS_virtual = $_POST['os_select'];
mysql_select_db($database_xyz_db, $xyz_db);
$query_virtual = sprintf("SELECT table.VM_IP FROM table
WHERE table.Operating_System=%s", GetSQLValueString($varOS_virtual, "int"));
$virtual = mysql_query($query_virtual, $xyz_db) or die(mysql_error());
$row_virtual = mysql_fetch_assoc($virtual);
$totalRows_virtual = mysql_num_rows($virtual);
I expected the 'os_select' field to be null and default value of Operating_System to be "Operating_System" so that the Query shows all records.
But instead the value being passed in the Query is "0". and no records are shown.
What can I do to show all records?
As probably obvious I am new to php/MySQL so all the help is most welcomed .
Thanks

Hi
Thanks for the prompt reply but this does not solve my problem.
First thing I appologise for giving you incorrect info. Actually I have many more constraints on the search apart from OS.
Didn't think I would get single constraint specific ans.
Here is what all i tried and problems I faced:
1. I cannot use seperate queries cause I have around 7-8 other constraints on the search.
2. I cannot play around with the Record set code. For some reason even if I mess with it a little bit Dreamweaver stops recognising the recordset. for eg i tried the below code:
$query_virtual = sprintf("SELECT table.VM_IP FROM table WHERE
table.Operating_System=%s ,($_POST['os_select']=="")? TRUE:GetSQLValueString($varOS_virtual, "int"));
this ran well for the first time, and then the record set was screwed up. kept on asking me to "Discover" the links, which it couldn't do.
3. take a look at this code:
$varOS_virtual = "Operating_System";
if (isset($_POST['os_select'])) {
$varOS_virtual = $_POST['os_select'];
$varState_virtual = "State";               //second constraint
if (isset($_POST['state_select'])) {
$varState_virtual = $_POST['state_select'];
mysql_select_db($database_xyz, $xyz);
$query_virtual = sprintf("SELECT table.VM_IP FROM table AND table.Operating_System=%s AND State=%s",
GetSQLValueString($varOS_virtual, "int"),GetSQLValueString($varState_virtual, "int"));
$virtual = mysql_query($query_virtual, $xyz) or die(mysql_error());
$row_virtual = mysql_fetch_assoc($virtual);
$totalRows_virtual = mysql_num_rows($virtual);
here on passing NULL value for "Any" GetSQLValueString($varOS_virtual, "int") functions returns NULL and though the Default value of
varOS is set to 'Operating_System" query takes NULL value only which when executed shows no records.
My problem majorly revolves around how to put something like "WHERE Operating_System= Operating_System" OR "WHERE Operating_System= TRUE" in the query, when passed through variable they are sent as Strings or NULL.
Thats why WHERE 1=1 also doesnt work, because it has "WHERE Operating_System= NULL" in AND.
Logically when NULL is passed default value of variable should comeinto picture, but tha isnt happening.
Thanks again for answering. hope I was able to explain my problem.

How to show 'No Records Found' and 'Employee Name Unknown' in oracle report

Hello,
I'm using 6i and building a report to show employees who have incorrectly input their time. I have an input parameter so a user can select a specific employee by emp_id or can leave it empty to show all. That part works. I also have date parameters that are required. That works too. However I am having trouble displaying 'NO Records Found' if the date parameters have no late or rejected employee time records. I currently have it as a text field arranged behind the emp_name field which i filled white. It works...however i have a pretty good feeling there is a better way to do this. Also, I have some data that is null since i am using two tables. There are time stamps with no emp_name or emp_number. I still need to show these records but want them to show up as "Employee Name Unknown" that way the user doesnt get confused and thinks the emp_name in the row above also includes this row.
select e.location "Clock Location",
e.emp_no "Emp No",
l.first_name ||' ' || last_name "Name",
e.time_stamp "Time",
from emp_time e, master_all l
where e.emp_no (+) = l.emp_no
and e.status = 'rejected'
--and e.emp_no = nvl (:p_emp_no, emp_no)
--and e.time_stamp between :p_start_date and :p_end_date

Hi,
So, when the join between emp_time and master_all produces no rows, you still want one row of output, saying 'No Records Found'; is that right?
If so, you can outer-join the result set to dual, with some join condition that accepts anything.
Use CASE (or equivalents) to get special values (like 'No Record Found' or 'Employee name unknown') when certain columns are NULL.
For example:
SELECT     j.location     AS "Clock Location"
,     j.emp_no     AS "Emp No"
,     CASE
          WHEN j.name     IS NULL
          THEN 'No Records Found'
          ELSE j.name
     END          AS "Name"
,     time_stamp     AS "Time"
FROM     dual     d
,     (     -- Begin in-line view j, join of emp_time and master_all
          SELECT     e.location
          ,     e.emp_no
          ,     CASE
                   WHEN l.first_name IS NULL
                   AND       last_name    IS NULL
                   THEN 'Employee name unknown'
                   ELSE l.first_name || ' ' || last_name
               END     AS name
          FROM      emp_time     e
          ,     master_all     l
          WHERE     e.emp_no (+)       = l.emp_no
          AND      e.status (+)       = 'rejected'
--           AND     e.emp_no (+)        = NVL (:p_emp_no, emp_no)
--           AND      e.time_stamp (+) BETWEEN :p_start_date
                                         AND        :p_end_date
     ) j     -- End in-line view j, join of emp_time and master_all
WHERE     d.dummy     != j.name (+)
;In an outer join, all conditions involiving the optional table need a + sign; otherwise, the effect is the same as an inner join.
The message 'No Records Found' is a string, so it has to go in a string column.
I put it in the "Name" column, just because I knew that "Name" was a string.
You can put in in any other column if you wish. If that column is not already a string, then use TO_CHAR to make it a string.
You could also have a column just for this message.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables, and also post the results you want from that data.
DOUBLE U wrote:
I've tried nvl in the select statement but since emp_name is a concatination of first and last name it doesnt work. This is what i have tried
nvl(l.first_name|' '||l.last_name,'NO EMPLOYEE RECORD FOUND') "Employee",I assume you meant to have two | characters, not just one, after first_name.
The first argument to NVL will never be NULL in that case; it will always contain at least a space, whether or not the other columns are NULL. You could say:
NVL ( NULLIF ( l.first_name || ' ' || l.last_name
    , 'NO EMPLOYEE RECORD FOUND'
    )        "Employee",bujt I find it less confusing to use CASE, as shown above.

ALV GRID Report is not showing all records which is in internal table

hi all,
have one doubt. please clarify me. ALV Report is working fine since long tiem. But suddenly this report is showing few records only for the given input.   Example:   it_main table have 50 records, but output is showing only 10 records only. (we have not made any modifications in this report).
temporarily i have given excel output file from it_main table. excel file is showing all records.
here it_main have all the records. but output is showing few records only. it is not showing any error. i have tested with REUSE_ALV_LIST_DISPLAY function also. but it also showing same results(few records only.)
please give me some idea.
FORM display_alv_report.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_buffer_active          = 'X'
      i_callback_program       = sy-repid
      is_layout                = wa_layout
      it_fieldcat              = it_fcat
      it_events                = it_events
      i_save                   = 'A'
      is_variant               = wa_variant
    TABLES
      t_outtab                 = it_main
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
    MESSAGE text-204 " 'Error in Display the list'
    TYPE 'I'.
    LEAVE TO LIST-PROCESSING.
ENDIF.
ENDFORM.            .                    "DISPLAY_ALV_REPORT
Best Regards,
Srinivas

hi
Please study this program and give me suggestions.
ALV Declaration
DATA : it_events TYPE slis_t_event,               "ALV event
           it_fcat   TYPE slis_t_fieldcat_alv,        "Field catalog
           it_list_top_of_page TYPE slis_t_listheader,
           c_tabname TYPE slis_tabname   VALUE 'IT_MAIN'.
DATA : wa_layout TYPE slis_layout_alv,
            wa_event   TYPE slis_alv_event,
           wa_fcat    TYPE slis_fieldcat_alv,
           wa_variant TYPE disvariant.
START-OF-SELECTION.
PERFORM material_pass.
PERFORM data_retrieval.
END-OF-SELECTION.
PERFORM sub_display_report.
FORM sub_display_report .
DATA status(1).
IF r1 = 'X'.
    PERFORM build_fieldcatalog USING :
      '1' 'ERDAT'     'S.O DATE'             '' '10' 'X',
      '2' 'VBELN'     'SALE ORDER'           '' '10' 'X',
      '3' 'POSNR'     'SALE ITEM'            '' '6'   '',
      '4' 'BSTKD'     'CUSTOMER PO'          '' '35' '',
      '5' 'BEZEI'     'REASON FOR REJECTION' '' '40' '',
      '6' 'PLNUM'     'PLANNED ORDER'        '' '10' '',
      '7' 'AUFNR'     'PROD.ORDER.'          '' '12' '',
      '8' 'MATNR'     'MATERIAL NUMBER'      '' '18' '',
      '9' 'MAKTX'     'MATERIAL DESCRIPTION' '' '40' '',
      '10' 'WERKS'     'PLANT'                '' '4'   '',
      '11' 'KWMENG'    'SALE ORDER QTY'       '' '15' '',
      '12' 'VRKME'     'UNIT'                 '' '4'   '',
      '13' 'GAMNG'     'PROD.ORDER QTY'       '' '13' '',
      '14' 'IGMNG'     'CONFIRMED ORDER QTY' '' '13' '',
      '15' 'GMEIN'     'UNIT'                 '' '4'   '',
      '16' 'MENGE'     'G.R QUANTITY'         '' '13' '',
      '17' 'SOBAL'     'S.O BALANCE'          '' '13' '',
      '18' 'PRDBAL'    'PROD.BALANCE'         '' '13' '',
      '19' 'GSM'       'GSM'                  '' '4'   '',
      '20' 'SIZE1'     'SIZE1'                '' '10' '',
      '21' 'SIZE2'     'SIZE2'                '' '10' ''.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename              = pathname
        filetype              = ftype
        append                = 'X'
        write_field_separator = 'X'
      TABLES
        data_tab              = it_mains
      EXCEPTIONS
        file_write_error      = 1.
    IF sy-subrc = 0.
      status = 'S'.
    ELSE.
      status = 'E'.
    ENDIF.
ELSEIF r2 = 'X' OR r3 = 'X'.
    PERFORM build_fieldcatalog USING :
      '1' 'ERDAT'     'S.O DATE'             '' '10' 'X',
      '2' 'VBELN'     'SALE ORDER'           '' '10' 'X',
      '3' 'POSNR'     'SALE ITEM'            '' '6'   '',
      '4' 'BSTKD'     'CUSTOMER PO'          '' '35' '',
      '5' 'BEZEI'     'REASON FOR REJECTION' '' '40' '',
      '6' 'PLNUM'     'PLANNED ORDER'        '' '10' '',
      '7' 'AUFNR'     'PROD.ORDER.'          '' '12' '',
      '8' 'MATNR'     'MATERIAL NUMBER'      '' '18' '',
      '9' 'MAKTX'     'MATERIAL DESCRIPTION' '' '40' '',
      '10' 'WERKS'     'PLANT'                '' '4'   '',
      '11' 'KWMENG'    'SALE ORDER QTY'       '' '15' '',
      '12' 'VRKME'     'UNIT'                 '' '4'   '',
      '13' 'GAMNG'     'PROD.ORDER QTY'       '' '13' '',
      '14' 'IGMNG'     'CONFIRMED ORDER QTY' '' '13' '',
      '15' 'GMEIN'     'UNIT'                 '' '4'   '',
      '16' 'MENGE'     'G.R QUANTITY'         '' '13' '',
      '17' 'SOBAL'     'S.O BALANCE'          '' '13' '',
      '18' 'PRDBAL'    'PROD.BALANCE'         '' '13' '',
      '19' 'GSM'       'GSM'                  '' '4'   '',
      '20' 'SIZE1'     'SIZE1'                '' '10' '',
      '21' 'CUT1'      'CUT1'                 '' '11' '',
      '22' 'SIZE2'     'SIZE2'                '' '10' '',
      '23' 'CUT2'      'CUT2'                 '' '11' '',
      '24' 'SIZE3'     'SIZE3'                '' '10' '',
      '25' 'CUT3'      'CUT3'                 '' '11' '',
      '26' 'SIZE4'     'SIZE4'                '' '10' '',
      '27' 'CUT4'      'CUT4'                 '' '11' '',
      '28' 'SIZE5'     'SIZE5'                '' '10' '',
      '29' 'CUT5'      'CUT5'                 '' '11' '',
      '30' 'SIZE6'     'SIZE6'                '' '10' '',
      '31' 'CUT6'      'CUT6'                 '' '11' ''.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename              = pathname
        filetype              = ftype
        append                = 'X'
        write_field_separator = 'X'
      TABLES
        data_tab              = it_mainall
      EXCEPTIONS
        file_write_error      = 1.
    IF sy-subrc = 0.
      status = 'S'.
    ELSE.
      status = 'E'.
    ENDIF.
ENDIF.
PERFORM build_layout.
PERFORM build_events.
PERFORM sub_comment_build USING it_list_top_of_page.
PERFORM sub_set_variant.
PERFORM display_alv_report.
IF status = 'S'.
    MESSAGE 'Excel Output file Downloaded to Given Path' TYPE 'I'.
ELSE.
    MESSAGE 'Download Not Possible' TYPE 'I'.
ENDIF.
ENDFORM.                    " SUB_DISPLAY_REPORT
FORM BUILD_FIELDCATALOG
FORM build_fieldcatalog USING p_col_pos
                               p_fieldname
                               p_text
                               p_datatype
                               p_outputlen
                               p_col_freez.
wa_fcat-row_pos        = '1'.
wa_fcat-col_pos        = p_col_pos.
wa_fcat-fieldname      = p_fieldname.
wa_fcat-tabname        = c_tabname.
wa_fcat-reptext_ddic   = p_text.
wa_fcat-datatype       = p_datatype.
wa_fcat-ddic_outputlen = p_outputlen.
wa_fcat-key            = p_col_freez.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ENDFORM.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
FORM build_layout.
CLEAR: wa_layout.
wa_layout-window_titlebar   = 'LIST OF GSM WISE OPEN SALE ORDERS'.
wa_layout-colwidth_optimize = 'X'.
wa_layout-totals_text       = 'CUMULATIVE'.
ENDFORM.                    "BUILD_LAYOUT
*&      Form BUILD_EVENTS
FORM build_events.
CLEAR wa_event.
REFRESH it_events.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 0
    IMPORTING
      et_events       = it_events
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
IF sy-subrc = 0.
    READ TABLE it_events INTO wa_event
         WITH KEY name = 'TOP_OF_PAGE'.
    IF sy-subrc EQ 0.
      wa_event-form = 'TOP_OF_PAGE'.
      APPEND wa_event TO it_events.
      CLEAR wa_event.
    ENDIF.
ENDIF.
ENDFORM.                    "BUILD_EVENTS
     -->P_IT_LIST_TOP_OF_PAGE text
FORM sub_comment_build USING it_top_of_page TYPE slis_t_listheader.
DATA ls_line TYPE slis_listheader.
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = str1.
APPEND ls_line TO it_top_of_page.
CLEAR ls_line.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
   EXPORTING
     it_list_commentary = t_header[].
ENDFORM.                    " SUB_COMMENT_BUILD
*&      Form SUB_SET_VARIANT
      text
--> p1        text
<-- p2        text
FORM sub_set_variant .
CLEAR wa_variant.
wa_variant-report = sy-repid.
wa_variant-username = sy-uname.
wa_variant-variant = c_variant.
wa_variant-variant = p_layout.
ENDFORM.                    " SUB_SET_VARIANT
*&      Form DISPLAY_ALV_REPORT
*Display Report Using ALV GRID
FORM display_alv_report.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_buffer_active          = 'X'
      i_callback_program       = sy-repid
     i_callback_pf_status_set = c_pf_status
     i_callback_user_command = c_user_command
      is_layout                = wa_layout
      it_fieldcat              = it_fcat
     it_sort                  = it_sort[]
      it_events                = it_events
      i_save                   = 'A'
      is_variant               = wa_variant
    TABLES
      t_outtab                 = it_main
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
    MESSAGE text-204 " 'Error in Display the list'
    TYPE 'I'.
    LEAVE TO LIST-PROCESSING.
ENDIF.
ENDFORM.            .                    "DISPLAY_ALV_REPORT
*ALV Report Header
FORM top_of_page.
DATA : t_header TYPE slis_t_listheader WITH HEADER LINE,
         wa_header TYPE slis_listheader,
         t_line LIKE wa_header-info,
         ld_lines TYPE i,
         ld_linesc(10) TYPE c.
wa_header-typ = 'H'.
T_HEADER-INFO = 'LIST OF GSM WISE OPEN SALE ORDERS'.
wa_header-info = str1.
APPEND wa_header TO t_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = t_header[].
ENDFORM.                    "TOP_OF_PAGE
here it_main internal table having all data. but output is showing few records only.
pl. give some idea.
Thanks & Regards
Srinivas.

Report download to power point doesn't show all records

dear experts,
I have a report with a tape deck below, so it shows only records 1-25. When I click download to excel, every record is downloaded (1-all rows) and this is fine. But, if I download to power point, only the records shown on the dashboard (e.g. 1-25) are downloaded into power point.
Our quality assurance claims, that the behaviour for both download options should be the same, and not downloading to excel having every row and the power point showing limited rows.
Is there a way to download the whole report, each row, to power point (without clicking on tapedeck to show all) ??
Thanks in advance.
best regards,
Thomas

problem solved
modify report - results(answers) - click on printer icon (PDF and Print Control) - Print Rows - set to "All"
regards,
thomas

How to show multipe records on a single record

Hi all,
I have a query which can contain 1 or Many records for each S.WAS_NO or APPL_NO even. A new record is created when the APPL_STATUS changes and a timestamp is created in APPL_STATUS_CHANGE_DATE.
select distinct
       S.APPL_ID,
       S.WAS_NO,
       S.AS_STATUS,
       S.STATUS_CHANGE_DATE,
       dense_rank() over (partition by S.WAS_NO order by S.STATUS_CHANGE_DATE) rank
from table_a S, table b S2
where S.APPL_ID = S2.APPL_ID
order by S.WAS_NO, rank asc;
Current Results:
APPL_ID---WAS_NO---------------AS_STATUS----STATUS_CHANGE_DATE-----RANK
6628-------E4G0YL9B08V0V6---ASSIGNED-------25/10/2011----------------------1
6628-------E4G0YL9B08V0V6---USED--------------30/12/2011----------------------2
Desired Results:
APPL_ID--WAS_NO------------------AS_STATUS1----STATUS_CHANGE_DATE1----AS_STATUS2----STATUS_CHANGE_DATE2
6628-------E4G0YL9B08V0V6----ASSIGNED---------25/10/2011------------------------USED--------------30/12/2011The rank is based on the WAS_Number and ordered by the STATUS_CHANGE_DATE so i know which order they should go in.
I want to show 1 record per WAS_NO and show each status change with its date. There can only be a maximum of three status changes.
I have not been able to workout how to get Multiple records onto a singe record and in different columns.
Many thanks

This should do what you want:
WITH t AS
(SELECT 6628 appl_id, 'E4G0YL9B08V0V6' was_no, 'ASSIGNED' as_status, TO_DATE('25/10/2011', 'DD/MM/YYYY') status_change_date FROM dual UNION ALL
SELECT 6628 appl_id, 'E4G0YL9B08V0V6' was_no, 'USED' as_status, TO_DATE('30/12/2011', 'DD/MM/YYYY') status_change_date FROM dual UNION ALL
SELECT 6628 appl_id, 'E4G0YL9B08V0V6' was_no, 'COMPLETE' as_status, TO_DATE('15/01/2012', 'DD/MM/YYYY') status_change_date FROM dual UNION ALL
SELECT 6629 appl_id, 'A5AAFG1C07L0P2' was_no, 'ASSIGNED' as_status, TO_DATE('19/01/2012', 'DD/MM/YYYY') status_change_date FROM dual)
SELECT   appl_id,
         was_no,
         MAX(CASE rank
         WHEN 1 THEN as_status
         ELSE NULL
         END) as_status1,
         MAX(CASE rank
         WHEN 1 THEN status_change_date
         ELSE NULL
         END) status_change_date1,
         MAX(CASE rank
         WHEN 2 THEN as_status
         ELSE NULL
         END) as_status2,
         MAX(CASE rank
         WHEN 2 THEN status_change_date
         ELSE NULL
         END) status_change_date2,
         MAX(CASE rank
         WHEN 3 THEN as_status
         ELSE NULL
         END) as_status3,
         MAX(CASE rank
         WHEN 3 THEN status_change_date
         ELSE NULL
         END) status_change_date3
FROM    (SELECT appl_id,
                was_no,
                as_status,
                status_change_date,
                DENSE_RANK() OVER (PARTITION BY was_no ORDER BY status_change_date) rank
         FROM   t)
GROUP BY appl_id,
         was_no

Could not show multiple records while could show only one record

Hi, all
I have an oracle 10g db running on a Linux E3 server.
I have two tables:
CREATE TABLE "IMMUNODATA"."DEMOGRAPHICS" (
"SUBJECTID" INTEGER NOT NULL,
"WORKID" INTEGER,
"OMRFHISTORYNUMBER" INTEGER,
"OTHERID" INTEGER,
"BARCODE" INTEGER,
"GENDER" VARCHAR2(1),
"DOB" DATE,
"RACEAI" INTEGER,
"RACECAUCASIAN" INTEGER,
"RACEAA" INTEGER,
"RACEASIAN" INTEGER,
"RACEPAC" INTEGER,
"RACEHIS" INTEGER,
"RACEOTHER" VARCHAR2(50),
"SSN" VARCHAR2(11),
PRIMARY KEY("SUBJECTID") VALIDATE
CREATE TABLE "IMMUNODATA"."MEDICATION" (
"ID" INTEGER NOT NULL ,
"THEDATE" DATE ,
"SUBJECTID" INTEGER NOT NULL,
"MED_PAGENOTCOMPLETED" VARCHAR2(500) ,
"MEDICATION_NAME" VARCHAR2(100),
"MEDICATION_CLASSIFICATION" VARCHAR2(100),
"MEDICATION_DOSENUM" VARCHAR2(50),
"MEDICATION_DOSEMEASURE" VARCHAR2(100),
"MEDICATION_ROUTE" VARCHAR2(100),
"MEDICATION_FREQ" VARCHAR2(100),
"MEDICATION_BEGIN" DATE,
"MEDICATION_END" DATE,
"BARCODE" INTEGER,
"DATASOURCE" VARCHAR2(50),
"NOCHANGE" INTEGER,
PRIMARY KEY("ID") VALIDATE,
FOREIGN KEY("SUBJECTID") REFERENCES "IMMUNODATA"."DEMOGRAPHICS" ("SUBJECTID") VALIDATE
I want to show an output to combine all medication records of one person into one, and I created a function.
CREATE OR REPLACE FUNCTION COMMEDICATION(p_subjectid IN immunodata.medication.subjectid%TYPE ) RETURN VARCHAR2 IS
v_medication VARCHAR2(1000);
BEGIN
FOR c IN (SELECT THEDATE, MED_PAGENOTCOMPLETED, MEDICATION_NAME, MEDICATION_CLASSIFICATION, MEDICATION_DOSENUM, MEDICATION_DOSEMEASURE,MEDICATION_ROUTE,MEDICATION_FREQ,MEDICATION_BEGIN,MEDICATION_END,DATASOURCE,NOCHANGE FROM immunodata.medication WHERE subjectid = p_subjectid)
LOOP
IF v_medication IS NULL THEN
v_medication := c.THEDATE||' '||c.MED_PAGENOTCOMPLETED||' '||c.MEDICATION_NAME||' '||c.MEDICATION_CLASSIFICATION||' '||c.MEDICATION_DOSENUM||' '||c.MEDICATION_DOSEMEASURE||' '||c.MEDICATION_ROUTE||' '||c.MEDICATION_FREQ||' '||c.MEDICATION_BEGIN||' '||c.MEDICATION_END||' '||c.DATASOURCE||' '||c.NOCHANGE;
ELSE
v_medication := v_medication||','||c.THEDATE||' '||c.MED_PAGENOTCOMPLETED||' '||c.MEDICATION_NAME||' '||c.MEDICATION_CLASSIFICATION||' '||c.MEDICATION_DOSENUM||' '||c.MEDICATION_DOSEMEASURE||' '||c.MEDICATION_ROUTE||' '||c.MEDICATION_FREQ||' '||c.MEDICATION_BEGIN||' '||c.MEDICATION_END||' '||c.DATASOURCE||' '||c.NOCHANGE;
END IF;
END LOOP;
RETURN v_medication;
END;
and I performed this selection statement:
SQL> select subjectid, barcode, COMmedication(subjectid) from immunodata.demographics where barcode=500135;
SUBJECTID BARCODE
COMMEDICATION(SUBJECTID)
33 500135
15-SEP-00 Cyclophosphamide Immunosuppresant .7 MG IV MONTLY FORM1 ,15-SEP-00 Hydroxychloroquine (Plaquenil) Immunosuppresant 400 MG DAILY FORM1
It is exactly what I need， so I want to show all records in the tables.
SQL> select subjectid, barcode, COMmedication(subjectid) from immunodata.demographics;
ERROR:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "SYS.COMMEDICATION", line 9
no rows selected
It seems that one record could be shown, but multiple could not.
Is there anything wrong with my code or other things?
Thanks!
Qian

It seems that one record could be shown, but multiple could not.
Is there anything wrong with my code or other things?
It means that there is at least one subjectid in your table for which the value of v_medication in the function exceeds 1000 characters.
You may want to increase the size of v_medication to 4000, which would be the upper limit for the function's return value.
pratz

Is it standard behavior for VL10A/table VEPVG to show two records when a Sales Document has been blocked?

Hi Experts,
Is it standard behavior for VL10A to show two records when a Sales Document has been blocked? Their only difference is the field Delivery Block. In VL10A, the first record has a delivery block of BLANK, the second has 99.
Here's how to replicate the issue.
Create sales order.
When you check VL10A, the Sales document is there.
Change sales order field (RSD) in VA02, Save.
When you check VL10A, there are now two records, one has a blank delivery block, the other has 99.
The expected result here is that after changing in VA02, there will be only 1 record in VL10A and it should have delivery block of 99.
Assumptions:
1. We know that VL10A retrieves its records from VEPVG. The problem is, in VEPVG, delivery block is a key field. So I think that during VA02, when the delivery block of 99 is assigned, this creates a record in VEPVG instead of updating the existing one. Is this standard behavior, and are my assumptions correct?
Thanks in advanced experts. Appreciate your prompt response,
Jack

Hello Jack,
This is the standard behavior. When I check in our system, I too can see two entries but with different good issue date and delivery date and the block is specific to good issue date, delivery date.
So there is no problem in it. try to give the delivery date which includes two table entries delivery date and execute the transaction VL10A.
Regards,
TP

Freight Carrier Form not showing all records

The Freight Carrier form is not showing all of the data that shows in the table
(ORG_FREIGHT). For the Organization that I am in (#23) the table shows 108 records but the form only shows
35 records. Why? How can I make the form see all of the records in the tables? I am in the middle of converting 11.0.3 to
11i.
Thanks
Shelby

What version of Visual Studio and the Crystal for Visual Studio SDK are you using?
-Dell

Data source using Fn.Mod. in R/3 shows 53 records but in BW side show error

Hello gurus,
I have created a data source in R/3 , when tested showed 53 records, but in BW side when i did extraction it failed, & put me an error message saying
" error occured in source system"
Points will be awarded for any kind of response.
Thanks and regards,
Anurupa.

Hi,
Try what is given above.
Also check SM37 job log (In source system if load is from R/3) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' or cpicerror for any datapacket in SM37.
SM21 - System log can also be helpful.
If you are 3.5 try this also
1) Reduce the IDOC size to 8000 and number of data packets per IDOC as 10. This can be done in info package settings.
2) Run the load only to PSA.
3) Once the load is succesfull , then push the data to targets.
In this way you should be able to overcome this issue.
Hope this helps.
Thanks,
JituK

0HR_PT_2 shows 0 records in RSA3

Similar Messages

Maybe you are looking for