0HR_PT_2 Unable get to data in PSA
Hi All,
In BI production:
I got the following error messages loading data to 0HR_PT_2 PSA, but data is coming when I checked in RSA3 Replicated in BI side when I run the infopackage, unable to get the data into PSA showing status Red and the error messages are:
No read authorization for Cluster B2 72 102
Errors in source system RSM 340
Thanks in advance,
Teena
Hi
Once you have maked sure that the sap note 397208 was applied to your user, check if the remote user has the specific authorizations as per note 150315 (BW-Authorizations for Remote-User in BW and OLTP).
SAP_ALL and SAP_NEW profiles aren´t enough to this user, it need to have the specifics autorizations from note 150315.
I hope it helps you.
Regards,
Fran.
Similar Messages
-
Unable to Delete Data from PSA
Hi Experts,
I have a process chain which delete data from PSA on weekly basis . it running good . Since one month one of data target PSA data not deleting.
it gives me error like DDL time(___1): .........2 milliseconds
Delete request REQU_03RM2LOJ284N3GLM7Q574WLAO from PSA 8Z0MM_O39_OA: Error - subrc: 2
When i am tring to delete manually it gives me above error only.
I used programme (RSAR_PSA_CLEANUP_DIRECTORY)
for deleteting PSA Data this programme gives me errors request already deleted from data base. But still those request available when i am looking into PSA data.
it's happen only quality system not in the Production.
Kind Regards,
ve.Hi Srinath,
when i am looking into system there is no programeme with name(SAP_PSA_ZEROCORREC) But another programme RSAR_PSA_CLEANUP_DIRECTORY is available i tried with these programme for deleting PSA it gives me error like request deleted from database.
But it gives me an error indicator only.
i am tried to delete manually by selectiong those request from PSA it gives me error DDL Time (______1) 2 milliseconds.
Kind Regards,
ve. -
Reg: Not getting the data in PSA level
Dear all,
We are having 2 clients in one development server. One is for R/3 and another one is for bw. When i am doing the extraction for
SD billing documents ( Setup table -13) i done the same for LBWG,LBWE. And finally i got the data into the RSA3 tc. Wheni am
replicating the datasource in BW side. I got the datasoruce in BW client. But when i am scheduling that datasource for infopackage i can able to find out the data.
Errr or message:
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Please do the needful at the earliest.
Thanks,
Sankar MHi Sankar,
When you trigger the infopackage and if it shows the data available then there is no wrong in designing so First check the data at data sourcelevel in RSA3 and also at the source table
Regards,
Marasa. -
Unable to Loda the data into PSA.
Hi Xpert,
i am uanble to load the data into PSA.
my source system is not R/3,it is BI.
(ctually we are xtracting the data (from a cube) with the help of programm to a table and then i am creating a generic data ource on that table and loading the data to my cube.)
i am getting this error message.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
Then i replicated the data source and activate ti also then also i am getting this error message.
when i am checking my data source on RSA3 i am getting this error message,
Two internal tables are neither compatible nor convertible.
t happened?
Error in the ABAP Application Program
The current ABAP program "SAPLAQBWEXR" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
or analysis
You attempted to move one data object to another.
This is not possible here because the internal tables concerned
are neither compatible nor convertible.
gger Location of Runtime Error
Program SAPLAQBWEXR
Include LAQBWEXRU01
Row 419
Module type (FUNCTION)
Module Name AQBW_CALL_EXTRACTOR_QUERY
Regards,
sat534Hi
Problem looks to be with generic datasource
share details of data source and how you created it.
Regards
Sudeep -
Hi all,
Help me here when i try am unable to get a data,Can some one help me with a query to get.
If it cant be done can i know why..
select * from Sys.databases
where owner_sid='0x01'
What am trying is to get a login
names from syslogin
table with respect to Sid.
Select a.name,b.name,a.owner_sid from Sys.databases a
Join Syslogins b
on a.owner_sid = b.sid
where owner_sid like '0x01'
Thanks all in Advance.....Below are a couple of examples of how to accomplish the task. Note that SID is varbinary so the literal should not be enclosed in quotes.
SELECT
a.name AS DatabaseName
,b.name AS OwnerName
,a.owner_sid AS OwnerSID
FROM sys.databases a
JOIN sys.server_principals b ON
a.owner_sid = b.sid
WHERE owner_sid = 0x01;
SELECT
a.name AS DatabaseName
,SUSER_SNAME(owner_sid) AS OwnerName
,a.owner_sid AS OwnerSID
FROM sys.databases a
WHERE a.owner_sid = 0x01;
Dan Guzman, SQL Server MVP, http://www.dbdelta.com -
Just updated to IOS 7 and two issues:
First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services". I'm not sure what this really means...
The second issue is when I try to select "Manually Manage Music"
The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC". Do you want to erase this iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
So... I don't want to do that, but I do what to be able to Manage my music. I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
Anyone have any ideas?I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535
-
I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?
See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
tt2 -
When I connect my iphone4s to itunes on my laptop I get this error...itunes was unable to load data class info from sync serv
In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert -
I get this message when i try to sync and download my iphone, ITUNES was unable to load data class information from sync services, reconnect or try again later. this has happened twice. i have not downloaded by phone in several months. the first time i got this message i did not understand i and left my phone plug in for 12 hrs and it never did anything. today. when i got the message i just unplugged it.
helphttp://support.apple.com/kb/TS2690?viewlocale=en_US&locale=en_US
-
I keep getting the following message when I try to sync. Unable to load data class information from service. Reconnect or try again late
Try this
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert -
Hey, when I connect either my ipod or ipad to itunes I get the prompt 'itunes was unable to load data class information from sync services. Reconnect or try again later. Can anyone help me with syncing my devices?? Thanks in advance
I am having the same issue, anyone else ?
-
When I try to sync my ipod touch 5. I get the following message. iTunes was unable to load data class information from sync services. Reconnect or try again later.
I get the same message when I try to sync my iPhone 4s
Should I uninstall/reinstall itunes and if so should it be all the programmes associated with Apple or just iTunesSee this thread for more people having the same issue.
http://discussions.apple.com/thread/6500271 -
i have an ipod touch 5th gen and when connected to itunes i get a message saying itunes was unable to load data class information from sync services. reconnect or try again later. anyone got any ideas? i've tried most things on most forums but still no joy
Try here:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
If not successful see the previous discussion on the right side of this page with the green checkmark. -
Hi Team,
I am getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength).
Anybody please let me know how to resolve the issue. It has affected our 9 site collection with almost 2000+ sites. Please email me your your suggestion or you can share your ideas here also.
Tried to reset the IIS, checked the Internet connection speed (8MBps). Cleared the cache and all but no luck.
Thanks,
PronobHello,
I have found this support window for you:
http://support.microsoft.com/kb/556031
http://technet.microsoft.com/en-in/library/cc298582%28v=office.12%29.aspx
This may help you
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Corporate issued iphone 4S. Trying to update to ios 7. I tunes not recongnising the phone, and I get this message:
"itunes unable to load data class information from Sync Services. Reconnect ot try again later."
I have disconnected from itunes several times. The phone is dead, as if it was brand new.
I get "slide to setup" and then connect to wifi, which works, but nothing after that, just above message.Hello there, scott_arrow.
The following Knowledge Base article offers up some great information for your particular message:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/TS2690
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Maybe you are looking for
-
I get error while loading data into Oracle 11g R2 with EXTERNAL TABLES. error processing column DATE_M in row 1 for datafile C:\app\S\admin\orcl\dpdump\TABLE_EXT.txt ORA-01847: day of month must be between 1 and last day of month error processing col
-
i am trying to download OS X Lion from the app store and it says it can not complete my purchase becuase it needs at least 2GB of space and over 2GB on my computer...any ideas??
-
Thumbnails & originals--restored iPhoto Library
Awhile back, I had to reformat my hard drive and before doing so backed up my iPhoto library by copying the Library folder to a DVD. When I then imported the folder back to iPhoto I ended up with my Originals and Thumbprints in the Library along with
-
Audio 5.1 in AVCHD export
Importing AVCHD file (1920x1080p 50) with audio 5.1 with Premiere Elements 12 (in trial version), the audio cannot be put on track 1. For exporting, I found a setting for AVCHD 50p, but when I specify "canaux 5.1", When exprting, I've an error messag
-
Captivate 6 startup admin prompt always appearing and file menu display issues
Hi, Product: Adobe Captivate 6.1 WinVer: Win7x64 Our users are non local administrators. At startup they get the below screen as expected: The problem is the screen always appears at startup, even if they check the "Don't show" box. Secondly the menu