0hr_PY_1 does not bring through history data

Hi
Please can someone assist,
When using the extractor, I get the correct data but it brings through only the latest salary group. For example my data is:
01012012 Band7
01012013 band 8
01012104 band 9
The extractor only extracts the 01012104 band 9 record.
This is what is pulled into the PSA.
Is there somewhere I can change this, or how would I do this.
I need to extract all three records which currently reside in table PA00008.
Thank you

Hi,
Can you test your data source at RSA3, with full update mode.
at info pack are you using any selections while loading data to PSA?
Even check about authorization for HR Data sources.
Thanks

Similar Messages

My Library (History/Show All History) does not show ANY History - only Tags & "All Bookmarks". What settings do I need to adjust to have this show. Nothing in the Options/Privacy seems to be relevant

My Library (History/Show All History) does not show ANY History - only Tags & "All Bookmarks". What settings do I need to adjust to have this show. Nothing in the Options/Privacy seems to be relevant in English

Lightning is a problem for you because it hooks into Thunderbird at a low level and you need a version compiled for the platform Thunderbird is running on. So you can't do the preferred solution, which is to put your whole profile in a shared folder and have both instances of Thunderbird reference the same profile. (Ditto for Enigmail). Lightning may become an integral part of Thunderbird in an upcoming release, at which point this limitation due to Lightning should disappear.
And if you can't use a shared profile, you can't set your Lightning, or your Address Book, to share a common set of files. Put another way, the linkage from Thunderbird to its address book files and calendar data is hard-coded, and not exposed where we can adjust it. :-(
The halfway house is to place your mail stores in a shared place, and use the Local Directory setting in each account's settings to connect to it. They don't need to be in the profile; what's more important in your case is that they are in a folder accessible to both operating systems.
Look in your profile; everything under Mail and ImapMail needs to be moved out to a shared folder. Note the entries in Thunderbird under Local Directory before you do this, and reconstruct those pathnames in Thunderbird, but adjusted to suit their new locations.
(You can see here that you need to make many adjustments, one per account, in each instance of Thunderbird, so it's a high-maintenance solution and this is why we don't recommend it when the alternative, moving the whole profile, is possible.)
I share address books and calendars between Thunderbirds on various computers (and my phone and tablet) by syncing to something in the cloud; Google Contacts and Google Calendar are my choices, using gContactSync and CalDav.
Having made the break myself some years ago, I'd recommend you break away from Windows. ;-)

LR2.7 does not bring up images from Nikon D7100

LR 2.7 does not bring up images from Nikon D7100 which I have just purchased. I have downloaded latest DNG raw converter 7.4 but does not work. The images come through fine in Bridge but not Lightroom. What is the problem?

Since camera makers insist on their own proprietary file formats, Adobe must provide support for each new camera as it is introduced. When a new version of Lightroom is released all development and support for the previous version ends. Your camera wasn't even mentioned or introduced when Lightroom 2.7 was released. Consequently, there can be no support for it. When you buy the newest camera model you should expect to also buy updated software to support that camera. In any event, the raw processing in the latest version of Lightroom is so far superior to what you have you really need to upgrade your Lightroom. You might consider using the Lightroom 5 beta until the official release.
Are you sure the DNG converter doesn't work? You only point it to the folder containing your raw files. The DNG converter doesn't list the contents of the folder. You will only see a list of your NEF files after you click the button to convert them.

Verizon to AT&T Picture Messaging does not go through

Dear VZW Team,
Verizon to AT&T Picture Messaging does not go through.
Sending Number: Manassas VA (Area Code)
Destination Number: Leesburg VA (Area Code)
It is a local calling area and not sure what is causing the message to be ignored silently. The sending number gets the text credits deducted anyway.

Each phone company can only send a certain amount of Megabyte data from one phone to the other.

My safari does not keep my history despite all the settings and adjustment i made to the safari preferences so as to be able to keep my browsing history. the browsing history is wiped out whenever i close safari.

i use macbook pro mid 2012, OS X mavericks. my safari does not keep my history desp[ite all the adjustments made to the settings at safari preferences. my browsing history are cleared whenever i exit safari. i dont know why. i want to try and re - in stall it . the safari is version 7.0.1. but i dont know how.

If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Database backup and Restore do not bring latest Schema/Data.

Hi,
I have scheduled a Full SQL backup for a LIVE database every evening. Now, if I restore this backup to Test environment, it does not bring the changes from LIVE. The script I am using is:
BACKUP DATABASE [XXX_Applications]
TO DISK = N'\\XXXX\XXX_Applications.bak' WITH NOFORMAT,
NOINIT,
NAME = N'XXXX_Applications-Full Database Backup',
SKIP,
NOREWIND,
NOUNLOAD,
COMPRESSION,
STATS = 10
GO
declare @backupSetId as int
select @backupSetId = position from msdb..backupset where database_name=N'XXXX_Applications'
and backup_set_id=(select max(backup_set_id) from msdb..backupset
where database_name=N'XXXX_Applications' )
--Check for backupSetId NULL
RESTORE VERIFYONLY FROM DISK = N'\\XXXX\XXX_Applications.bak'
WITH FILE = @backupSetId, NOUNLOAD, NOREWIND
I had to manually go to SSMS->Tasks->SQL Backup. Restoring the manual backup brought all the latest changes from live.
Not sure what might be the issue with scripted backup.How do I make sure that Backup generated is correct?
Shady

BACKUP DATABASE [XXX_Applications]
TO DISK = N'\\XXXX\XXX_Applications.bak' WITH NOFORMAT,
NOINIT,
Hello Shady,
NOINIT means the backup file stays as it is and the new backup is appended to the backup file. With the default RESTORE Syntax you restore the first backup in the file, not the latest backup; therefore you get old data/Schema.
Change it to INIT to clear the backup file first before the backup is added or address the latest backup in the RESTORE command.
Olaf Helper
[ Blog] [ Xing] [ MVP]

My win7 does not browse through my iphone3gs, it can only see pics on iphone. what can i do?

my win7 does not browse through my iphone3gs, it can only see pics on iphone. what can i do?
i want my bluetooth to work with non apple products.
my safari does not download many webpages. give me suggestions for soln please

Hi julianrpoma,
I apologize, I'm a bit unclear what you mean when you say you cannot access it, and/or how a new iPhone was set up with an old account. If your Apple ID/iCloud account is now different, you may want to try changing the iCloud settings, as well as any other Apple ID settings, as outlined in the following article (apologies if that is what you are currently doing):
iCloud
iOS 6 and later: Go to Settings > iCloud.
If you signed out before changing your Apple ID, enter your current Apple ID to sign in. The data from your iCloud account will download to your device.
If you're still signed in with your previous Apple ID:
Scroll down and tap Delete Account. Depending on what iCloud options are turned on, you'll be asked to confirm that you want to delete data from your device. To confirm, tap Delete. (If you're using iOS 7 and have Find My iPhone turned on, you'll be asked to enter the password for your previous Apple ID. Enter the password, then tap Turn Off.) The data will be deleted from your device, but not from iCloud.
Enter your current Apple ID to sign in. The data from your iCloud account will download again to your device.
Apple ID: What to do after you change your Apple ID - Apple Support
If you are still having issues, as this is a new iPhone you may want to try restoring it to factory settings and setting it up as new, including your correct updated account information:
Use iTunes to restore your iOS device to factory settings - Apple Support
Regards,
- Brenden

Sync between Firefox English on WinXP and Firefox French on MacOS 10.5 (english or french) does not bring bookmarks (bug brings tabs from other computer)

Sync between Firefox (latest) English on WinXP and Firefox French (same version) on MacOSX 10.5 PPC (iBook G4) (english or french) does not bring bookmarks (bug brings tabs from other computer). Account WORKS, yet sync does not sync anything BUT the "alien tabs". Using Sync to migrate plataforms in this scenario is impossible. Any hints here ? Thank you.

After experimenting, each sync is scheduled on the each individual device and after all of them have completed, the about:sync-tabs page shows the updated tabs. It is not realtime, it seems to take a few minutes. This being the case, a fresh login did speed this up. If I logged out of the firefox account on my mobile device and logged in, I immediately saw the tabs on the about:sync-tabs page.
There is no limit to how many can be synced. There is a number of tabs that make it to the queue for the next scheduled sync. The tabs are done by a time interval as far as I noticed in the experiment.
The history is indeed merged with the history from other devices. It is merged the synced to each of the devices over an interval of time.

JDODataStoreException: The instance null does not exist in the data store

I'm unable to figure out how this exception occurs.
I have a class IDCounter which has a number of fields such as
'm_Name' (String)
'm_AccountName' (String)
'm_UserName' (String)
'm_Description' (String)
'm_CreationDate' (Date)
'm_LastModifiedDate' (Date)
'm_DeletedDate' (Date)
'm_Count' (long)
The filter I'm using is "m_AccountName == \"test\" && m_UserName
==\"test\" && m_DeletedDate == null"
The generated SQL statement is "SELECT t0.M_IDX, t0.JDOCLASSX,
t0.JDOLOCKX, t0.M_ACCOUNTNAMEX, t0.M_CREATIONDATEX, t0.M_DELETEDDATEX,
t0.M_DESCRIPTIONX, t0.M_LASTMODIFIEDDATEX, t0.M_NAMEX, t0.M_USERNAMEX,
t0.M_COUNTX FROM ABSTRACTENTITYX t0 WHERE ((t0.M_DELETEDDATEX IS NULL) AND
t0.JDOCLASSX = 'com.ewarna.pdm.entities.IDCounter')"
Exception Trace:
javax.jdo.JDODataStoreException: The instance null does not exist in the
data store.
     at
com.solarmetric.kodo.impl.jdbc.runtime.LazyResultList.instantiateRow(LazyResultList.java:165)
     at
com.solarmetric.kodo.impl.jdbc.runtime.LazyResultList.get(LazyResultList.java:96)
     at java.util.AbstractList$Itr.next(AbstractList.java:416)
     at
com.solarmetric.kodo.runtime.ResultListIterator.next(ResultListIterator.java:49)
     at
com.solarmetric.kodo.impl.jdbc.runtime.ResultListFactory.createResultList(ResultListFactory.java:85)
     at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.executeQuery(JDBCStoreManager.java:646)
     at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCQuery.executeQuery(JDBCQuery.java:150)
     at com.solarmetric.kodo.query.QueryImpl.executeWithMap(QueryImpl.java:580)
     at com.solarmetric.kodo.query.QueryImpl.execute(QueryImpl.java:428)
     at
com.solarmetric.kodo.query.QueryImpl$SynchronizedQuery.execute(QueryImpl.java:1331)
     at
com.ewarna.pdm.sessions.persistence.BasicQuery.getByAdvancedFormula(BasicQuery.java:78)
     at
com.ewarna.pdm.sessions.persistence.BasicQuery.getByFormula(BasicQuery.java:119)
     at
com.ewarna.pdm.sessions.persistence.BasicQuery.getByFormula(BasicQuery.java:95)
     at
com.ewarna.pdm.sessions.persistence.BasicQuery.getAll(BasicQuery.java:131)
     at
com.ewarna.pdm.sessions.persistence.GenericEntityManager$7.execute(GenericEntityManager.java:305)
     at
com.ewarna.pdm.sessions.persistence.GenericEntityManager.execute(GenericEntityManager.java:251)
     ... 18 more

Youcan no longer display a workbook. You receive an error message when opening: <Internal error>: 1201 document storage
Cause and prerequisites
In very rare cases, when you store a workbook, you might not be able to open it again.
Solution
Function module BDS_PHIOS_GET_RIGHT has to be changed so that the last available version of the Workbooks can be displayed.

Payroll period does not correspond to master data error in INLK run & soln

Dear All,
Just wanted to share this Issue and solution which i found after debugging.
I am not sure it is 100% correct.
I am working on indian payroll and was doing lagacy data transfer with INLK schema
i was used to get error '2 payroll period does not correspond to master data'
and this was for only new joinees in that period .what i found out after debugging is
for e.g. employee is hired in 03.06.2011 .and record in t558b is
90300035 1 2011 1 2011 3 01.06.2011 31.06.2011
where 01.06.2011 is a for period begin date ,
now in payroll program this is being checked with joining date in following subroutine check_aper_versus_t558b
so it ends up with above error.now if i go and change 01.06.2011 to 03.06.2011 in T558B then payroll will be successful.
I dont no whether this is right approach but this removed that error.Just wanted to share so
It might help the members.

la diferencia es la fecha del campo FPBEG que debe ser la fecha para los empleados que no esten con el año o periodo completo
the difference is the date field FPBEG Table T558B to be the date for employees who are not full with the year or period

The itunes application icon on my dock does not bring up itunes. Haven't had a problem with this in the past.

The itunes application icon on my dock does not bring up itunes. I have no problem accessing itunes from my iphone though, so I believe it is computer related rather than an itunes issue. Haven't had this problem before.

Does the icon in your dock look like this?
Can you open iTunes successfully from your Mac's Applications folder?
Are you running the current version of iTunes (11.2.2)? If not, get it from here:
http://www.apple.com/itunes/download

When I enter a web address, hitting enter does not bring it up. I have to use my mouse and click "go to address" arrow. This only recently started. How do I fix this?

when I enter a web address, hitting enter does not bring it up. I have to use my mouse and click "go to address" arrow. This only recently started. How do I fix this?
When I open firefox my home page comes right up, but, anything I enter after that does not open by hitting enter.
Please advice,
Anita

Probably caused by an extension that you have installed. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

When I try to create a new Message on my Mac, Messages does not bring up my Contacts

I have followed the instructions to setup Messages, I can send messages to the email addresses that I have memorized, but when I try to create a new Message on my Mac, Messages does not bring up my Contacts when I type in the search field for a person that has an iPad or iPhone.
This sems out of sorts for an Apple product. Their stuff normally just works.
For some reason, My Mac Mini with Mountain Lion doesn't recognize my contact names, or it isn't synched with my contacts...
Anybody else want to weigh in, please?
Thank you!

Hi,
I would point out that I did say...
Of course the Contacts List has to have people listed in it.
The Error seems to be that you have not even got an My Card.
The OS when the computer is brand new and you set up the first Admin Account should create at least once Card entry for the Address Book/Contacts which has the Head and Shoulders icon (the My Card)
The does presume the the first account on the Mac doers have a person's First name and Last name to work with.
Of course not everyone sets things up this way.
Anyhow
To Check the Contacts List open the app.
Go to the Preferences.
Go to the Accounts section.
This should list at least two "accounts
One is for Syncing with iCloud and the other is for storing the Info on the Mac itself
In System Preferences > iCloud you can only set up one Apple ID to be the iCloud ID.
If you do or have changed this you may have extra accounts in the Contacts > Preferences > Accounts
Uploaded with Skitch!
7:36 PM Thursday; September 6, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Image Processor does not start through Bridge CS5

Image Processor does not start through Bridge CS5, it starts only PS and nothing happen. I do not know, how to repair it.

Most likely you do not have the startup files checked.
In Bridge go to edit/preferences/startup scripts. Make sure you have a check mark for Bridge and Photoshop. Without that they can't talk to each other.

HT201401 i have a birthday showing in my calendar listed as an all day event and it is incorrect how can I delete it. When clicked on does not bring up the edit feature. The vodaphone shop thinks it has synced with my facebook app.

i have a birthday showing in my calendar listed as an all day event and it is incorrect how can I delete it. When clicked on does not bring up the edit feature. The vodaphone shop thinks it has synced with my facebook app.

hello, the addons manager is exactly the right place to look for it. please try disabling the addons that are listed there one-by-one (a restart of the browser might be necessary after each step). maybe one of them is bundling this kind of adware.
[[Disable or remove Add-ons]]

0hr_PY_1 does not bring through history data

Similar Messages

Maybe you are looking for