0HR_PY_1 Update rules missing in Business Content

Hi All,
In business content update rules from 0HR_PY_1 to Cube 0PY_C02 is missing.
We are on BI_CONT 703 0009 SAPKIBIIP9 Package level. I have checked in other system which is on package level 7 the update rule exists. And in the system with package level 11 the update rule doesn't exists.
Did anybody faced this issue. Any solution/comments on the same.
Thanks and Regards,
PV

Hi,
I have also check for the same in our Bi 7.0 system but cud not find the update rules for cube  0PY_C02
please refer to following thread which says abt seperate HR SAP system for this cube data which cud b a reason
Update rule for cube 0PY_C02
and about the cube 0PY_C02
http://help.sap.com/saphelp_nw70/helpdata/en/22/7883373c1af326e10000009b38f8cf/frameset.htm
Sonal...

Similar Messages

  • Transfer Rules missing in Business Content (704 lvl 1) for CMS

    Hi SDN,
    We are currently on BI 7.0, and using Business Content 704 level 1.  When collecting BIC InfoSources for Collateral Management Systems (CMS), we notice that the transfer rules are missing in business content.
    Has anyone encountered this issue?  I have  been referencing notes 1171293, and 1179880
    Thanks,
    Brendon

    hi,
    If there is missing in Business its problem with the business content patch levels.Check out with your basis team.
    Regards,
    Shiva.

  • UPDATE RULES INACTIVE WHEN BI CONTENT INSTALL

    Hi,
    When i activating business content update rules are not coming as active.
    when i raise  OSS note to SAP the following suggession given.
    editing the UPDRs, and changing the update method from the Time Ref. tab.
    how to edit update rules, from time Ref tab there is routine,  for 0cal year/month i need assign source field in time ref. tab.
    what is the code for it please let me know/ how to resove the issue.
    unless i write the code / assiging the source field  the update rules cannot be activated.
    Thanks,
    Sakali

    Hi,
    You can easily edit your update rules by getting into change mode.
    Step 1: Double Click on your KF relevant Ty column
    Step 2: After doing necessary mappings in KF Calculation Tab, Chars Tab
    Step 3: Click on Time Ref Tab and again click on Method of your Time Char
    You need to be careful about How you want to map your Time Chars. It depends on your business logic. Discuss with your Functional team or please cross check with your Blue print before you map any fields.
    Regards,
    Suman

  • Can we get Transformation rules while activating Business content

    Hi Gurus,
    I am trying to install business content for the cube 0SD_C05 in BI 7.0. I have selected in dataflow before and afterwards, but I am getting that as Bw 3.X flow like update rules and tranfer rules. Is there any option that I can get the business content installed in BI 7.0 flow, like I need the transformation rules and all.Please advise.
    Kind Regards,
    Raghu

    Hi,
    While activating the BI content it will ask for the Datasource type to be extracted.There you need to specify in 7.0
    Now as you have extracted,you can migrate the same.
    Go the datasource>rt clk>migrate>with export>after migration>replicate the DS>activate and create transfor mation...
    Hope this helps
    Cheers,
    Shana

  • Trasfer Rules missing in BI Content

    Hi,
    I'm facing an issue with transfer rules in BI 7.
    For most infocubes, when i try to activate bi contnet in data flow before, it does not give me transfer rules.
    Moreover, on the bi content installing screen on the workbench, when i'm trying to locate transfer rules, the system doesnt show any transfer rules available in bi content.
    my bi cont is on patch level 11.
    Please help,

    Ramakrishna,
    You re not entirely correct. Transformations are introduced in BI 7 but the old concept can still be used.
    Moreoever, BI Content still predominantly delivers UR and TR.
    Can anyone help in this matter?
    Thanks

  • Error installing business content update rules

    Hi,
    I'm trying to install the below updates rules from the business content
    0PLANT$T 0PLANT_TEXT      53AFFWD74OI3CT3RDE3RI9THU
    0PLANT 0PLANT_ATTR         5UZVD7UWYN4T81H24YBKGH6KY
    I get the error
    IC=0PLANT$T IS=0PLANT_TEXT syntax error:  rows 0
    Long Text:
    IC=0PLANT$T IS=0PLANT_TEXT syntax error:  rows 0
    Message no. RSAU466
    Diagnosis
    When generating the update program for InfoProvider 0PLANT$T, InfoSource 0PLANT_TEXT, a syntax error in line 0.
    System Response
    The update rules cannot be activated.
    Procedure
    If error message :
    is cut off, proceed as follows to get the complete complete error message:
    Go into update rule maintenance, choose Extras -> Display Activated Program and perform a syntax check. This allows you to find out what the error is.
    If I select the Display Activated Program it says does not exist.
    Can anyone help me figure out this issue?
    Thanks

    We are currently on SAP EHP 1 for SAP NetWeaver 7.0
    SAP_BW Release 701 Support Package SAPKW70107
    BI_CONT Release 705 Support Package SAPK-70501INBICONT

  • Activate Update Rules from Business Content

    Hello,
    I am trying to install 0QM_C10 from business content. Every thing works fine except there are no update rules (there are 3 info sources for this cube). I am new to this and it doesn't make sense for me to manually create (ofcourse the system does the proposal) update rules. Since that is lot of work. I was expecting some transaction / tool where I can activate the update rules from the Business Content (since I can see the update rules in the business content under "Display Description". Is there any tool like that?
    Or, am I doing some thing wrong so the update rules are not automatically installed from the business content along with Cube and info sources?
    Note: I did separate installation for cubes as well as info sources from business content using Grouping by "Only necessary objects" option.
    Thanks in advance.
    Bala
    Message was edited by: Bala Lingamaneni
    Message was edited by: Bala Lingamaneni

    Bala,
    please don't uncheck the checkbox that you find when you open a new thread (let it as default!)...this is the only way to be able to assign points to your helper !
    Write a request (as a normal post) into SDN Suggestion forum in which you ask to Marc Bernard or Mark Finnern to convert this post as question !
    Bye,
    Roberto

  • Copy Update Rules

    Hi Gurus,
    We installed some Business content cubes along with the corresponding update rules. We want to do Z-copy of the cube. How do we copy update rule of a Business Content Cube (eg 0PUR_C01) to a Z-copy of the same cube (eg ZPUR_C01)?
    Please let me know
    Thanks

    We have a standard ODS which gets updated thru update rules from an Infosource. However, the next level Data Target (which is a Standard infocube) gets updated from the ODS. While doing the Z-copy of ODS I did have the original ODS as in the 'template' field in the 'create update rule' initial screen and I got the update rules copied in same way as it is with the original ODS. However, I am not sure what exactly I need to do for copying the update rules from the Z-ODS to Z-cube. What needs to be filled in the "template" field?

  • Content for 0REFX_3 transfer rules missing.

    Hi folks
    We are trying to implement content for 0REFX_C03 cube. But the transfer rules from datasource to infosource 0REFX_3 is missing from business content.
    Inorder to get that we have implemented SAP note
    BW transfer rules missing in delivery
    SAP Note Number: 1246385 
    And we installed  BI_CONT 704 SAPK-70401INBICONT  New support pack for BI content.
    It leads to weird changes in the system like previously available objects in BI content are missing.
    Did any body encountered same problem.

    Hi,
    We are having the same problem - no transfer rules for  0REFX_C03.
    Currently on BI_CONT 735 Level 003.
    Did this problem get resolved?
    Any help greatly appreciated.

  • Missing Info Objects and Business Content in IDES ECC6 with BI7.0

    Hi All,
    I do not see most of info objects like 0COMP_CODE, 0BUS_AREA, 0RESP_PERS etc. and lot of objects missing in Business Content too.
    I have IDES ECC6 with BI7.0.
    Could someone please help me to retrieve those objects.
    Thanks.

    Hi Kishore,
    Thanks for the info. I am little confused. I thought i had full BW in my ECC6. What is the difference between ECC6.0 with BW and ECC6.0 with BW/BI7.0? BI7.0 has all business contents in it?
    The IDES software has BW/BI 7.0 in it. That is what the person whi gave me told me. How can i verify that?
    I have some knowledge of BW and i am trying to learn this new BW 7.0 on my own. Since it does not have BI content how can i proceed to learn on my own.
    Please help. Thanks.

  • Restrict Update Rule from Re-install

    We've modfied SAP delivered update rules to add our own start routines and mapping. Since update rules are non-mergeable objects in business content installation, they gets overwritten with business content delivered version if someone re-installs the update rules. Is there any way we can restrict from allowing user to re-installing the update rule? Is there any BAPI or user exit available throught which I can restrict installation of specifc update rules? Any inputs are appreciated.
    Thanks,
    Milind

    Since you have your own routines, the best thing is to keep this as the custom update rules and leaving the content one untouched.
    Ravi Thothadri

  • For 0PS_C02  cube  Project System - Dates update rules not activated!!

    Hi All,
    When we are trying to install update rules from the BI content for PS module  for the cube "0PS_C02  Project System - Dates",  the
    update rules are not activating. under the cube when BI content activation. What is the issue in activating the update rules from BI content. From BI content the available version objects only will be activated i think. Please rectify and resolve the same at the earliest friends.
    thanks,
    Sakali

    Hi,
    Try to activate through program RSAU_UPDR_REACTIVATE_ALL.

  • Missing Update Rules for 0IC_C03 in Business Content

    We had a problem with 0IC_C03,  so we decided to reload from Business Content and then migrate to 7.0 format again.
    However, when we try to gather all of the dependent objects for the InfoCube in Business Content, we only get one set of obsolete update rules (2LIS_40_S278), and the update rules for 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM do not show up.  They do not appear under update rules, either.
    I know they were there at one point because I activated and migrated the cube once already.
    Can someone help us find our lost update rules?

    Hi Dan,
    There are no update rules deliverd with BI 7.0 for 0IC_C03. There are only
    transformations Delivered as part of the content. In the new release
    Transformation replace the update rules and the transfer rules.                                                                               
    You have the 3 data sources and the associated transformations to  
    upload data to the infoCube.                                                                               
    Transformations installed                                          
    TRCS 2LIS_03_BF_TR -> CUBE 0IC_C03                                 
    TRCS 2LIS_03_BX_TR -> CUBE 0IC_C03                                 
    TRCS 2LIS_03_UM_TR -> CUBE 0IC_C03                                                                               
    DataSources installed                                             
    2LIS_03_BF                                                        
    2LIS_03_UM                                                        
    2LIS_03_BX

  • Error while Installing the update rules in business content

    Hi All,
    I got the following error,when i was installing the update rules : Object UPDR D4C8V3KA00XD5ANPVUAH9KQDJ could not be found in version M. but these update rules appear as inactive mode in bi content-object types-updaterules-selection-inactive status.
          Please could i know where we can check version status for business content pdaterules. but it was showing NOT FOUND IN Version M .
    please anybody can help me for solving this error.
    i will asign points for your inputs.
    regards,
    kumar.
    Edited by: kumar kumar on May 20, 2009 5:58 AM

    Hi,
    You can check the Content Release and Last Content Modification for your update Rules following thee given path:
    RSA1>BI Content>object Types>Update Rules>Select object(search for ur update rules) -->Transfer Selections.
    After they are being transfered to the right pane.On right pane (where you can see the its technical name) scroll towards right you will see last three tabs as "Content Release,Last Content Modification and Person responsible".
    Change the Grouping as "Before and afterwards" and then try installing.
    Hope it helps.

  • Copy Update Rule from Business Content

    Hi All,
    Currently I have activated some standard BI Content E.g. InfoCube 0FIAR_C03, DSO 0FIAR_O03, InfoSource 0FI_AR_4 and all the corresponding update rules.
    Now I have copied both InfoCube and DSO into another customized version E.g. ZAR_C03 and ZAR_O03. I managed to copy the same update rule from InfoSource 0FI_AR_4 to ZAR_O03 using the template but I don't have the option of copying the same update rule from ZAR_O03 to ZAR_C03 using the same update rule of 0FIAR_O03 to 0FIAR_C03.
    I know I have the choice to manually re-create all the details but is there any other workaround?
    Please read through carefully my question. I have seen some forum asking to load data from 0FIAR_O03 to then ZAR_O03 then so forth.
    Purpose of doing the above method is because I want to remain the business content as what it is and just to copy it to Z version for customization.
    Thanks
    David Yee

    Hi All,
    Is there any other second opinion related to this issue before I close the question?
    Thanks
    David Yee

Maybe you are looking for