0HR_PY_PP_1..posting index data load failure-urgent
Hi All,
We are extracting the postng index data(delta mode) from r/3 data source 0hr_py_pp_1 to the ODS 0PY_PP_1.It is in QA system.
When i trigger the infopackge , the data is load successful with zero records(as there is no new delta).If i trigger the IP next time, its throwing the error message as below
Slection criteria TRANSFERDATE is missing with the data rrequest and errorin the source system.
could anyone let me know , is it possible to load the payroll data second time after the successful updation of the load for the first time.
If not knldy let me know are there any SNOTEs to be applied.
Currenly on r/3 side , pacthing exercise is going on.Is there any impact due to this on BW end.
Please suggest me how to go about this as it is very urgent issue.
Many Thanks,
Manjula
Hi,
Have you tried to extraction at RSA3?
if you get the same error message then seek SAP HR Team help.
Seems like there is some issue about Mentioned PERNR and payroll assignment.
HR Team can explain about it.
if possible try run info pack with other PERNR selection and see. it may pulls data.
Thanks
Similar Messages
-
Hi All,
When we are loading standard info cube 0pur_c01 following error occured.
Cube :0PUR_C01
INFOSOURCE : 2LIS_02_SCL.
Time conversion from 0CALDAY to 0FISCPER (fiscal year ST ) failed with value
05060905.
Please propose a solution for this.
Points Promised
Regards
Mahesh kumarHi Mahesh,
The problem lies in the fact that the fiscal year variants are not maintained properly in the BW customizing or has not been transferred from the source system to the BW.
Generally the update rules calculate 0FISCPER from 0CALDAY based on the 0FISCVAR entry.
This is usually a direct update in the update rules.
If there is no entry in the incoming data record for fiscal year variant then the system can not calculate the correct period.
You can test this by entering a constant for the fiscal variant in the update rules or
by reviewing the PSA data being loaded.
Another possiblity is that the fisacl variant definition has not been
transferred from the source system:
-> RSA1 (Admin workbench)
-> Source System
-> Select Source system
-> Right click for context menu
-> Transfer Global Settings (to update fiscal variants)
Try this.
Hope this will solve your problem.
Regards,
Sreedhar -
Everynight we are loading the data into BW Production system using Process Chains.
When there is data load failure, is there a way we get information on Pager for immediate action.
Suggestions are welcome.Easiest way (at least the way I've always set it up)is if you have a text pager is have it e-mail the pager. The BASIS team will need to set up the SMTP service in ICM and a job to schedule the e-mails to be sent. You'll also need to set up the e-mail address in the user's SU01 info. There are several notes on how to set this up.
You can also set up a program that pages you but requires an exteral modem to dial up, etc. SMTP service is already there and pretty easy to integrate into your company's e-mail.
-bill
Message was edited by: Bill Smallwood -
Data load failure with datasource Infoset Query
Dear Experts,
I had a data load failure today,where i am getting data from the datasource which was built on Infoset Query.
we had a source system upgrade and when i checked Infoset query in the development of Source sytem im getting the below message :
"Differences in field EKES-XBLNR
Output Length in Dictionary : 035
Output Length in Infoset : 020
Message was saying Adjust the INFOSET,I dont have authorisation to create the transport in the source system.I requested the respective person to Adjust the Infoset and also to regenerate the same and move to production system.
I think this will solve my problem,Please correct me if am wrong.
Regards,
Sunil Kumar.BHi Suman,
i am still facing the problem even after adjusting the Infoset.The problem is we are facing the short dump with length mismatch.
when i checked the Infoset we are taking the field xblnr from table EKES and data element for teh field was XBLNR_LONG(char-35) but when i checked the datasource in RSA2 the dataelement for XBLNR was showing as BBXBL(char20).
i think this was causing the problem and i checked in SQ02 we will take the field directly from the table and how there is chance to change the dataelement.
Please help me to correct the same.
Regards,
Sunil Kumar.B -
Master Data Load Failure- duplicate records
Hi Gurus,
I am a new member in SDN.
Now, work in BW 3.5 . I got a data load failure today. The error message saying that there is 5 duplicate records . The processing is in to PSA and then to infoobject. I checked the PSA and data available in PSA. How can I avoid these duplicate records.
Please help me, I want to fix this issue immediately.
regards
MiluHi Milu,
If it is a direct update, you willn't have any request for that.
The Data directly goes to Masterdata tables so don't have Manage Tab for that infoobject to see the request.
Where as in the case of flexible update you will have update rules from your infosource to the infoobject so you can delete the request in this case.
Check this link for flexible update of master data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/37dda990-0201-0010-198f-9fdfefc02412 -
Data load failures in Essbase Clusters ( MSCS)
Hi,
If there is a failure on the Active Essbase Cluster Node (call this Node A) and the Cube has to be rebuilt on Cluster Node B, how will the Cube be re-built on Cluster Node B.
what will orchestrate the required activities in the correct order to rebuild the Cube)? Both Essbase nodes are mounted on to Microsoft Clustered Services.
In essential, I want to know
A) How to handle the metadata load that failed on Node1 onto Essbase Node2?
B) Does the session continues to perform the meta data/ data load on the Essbase Second Node when the Essbase First Node fails?
Thanks for your help in advance.
Regards,
UB.It would be built the same way as you either use the Essbase clustername or the MSCS VIP used for the Essbase cluster configuration, you would not ever be referencing a host name so it does not matter which node it is running on.
The session will be lost on a failover as it is the same as an essbase restart.
Cheers
John
http://john-goodwin.blogspot.com/ -
Hi All,
Could any body clearly explain the following options in the Info Package of master data Info Object with full update
Update data
1. PSA and then into Info Obejcts
2 . Only PSA ( Update Subsequently in data targets )
Data source trasfers no duplicate records
Igonore double data records
While I am doing master data load with the 1 and 3 options I am getting same no of records updated in PSA but loadng is getting failured with the 1st option (Caller 01 02 .. 20 Messages ) .and request with 3rd option is success..
Thanks in Advance...
Regards,
NagamaniHi
U r master data might have the Dublicate records
select the PSA
and select the option
Ignore dublicate data records
IF you have the Deblicates
EX
CNO
1010
1020
1010
ITs not alowed the 1010 record
Regards -
Hi,
I created a BW Data Source in R/3 and checked in RSA3 (R/3) it is extracting the required record...
But when i started data load in BW using that extractor i am geting error message
<b>Request IDoc : Application document not posted</b>
How can i proceed.
ThanksHi,
Refer the link:
https://forums.sdn.sap.com/click.jspa?searchID=937834&messageID=2379005
With rgds,
Anil Kumar Sharma .P -
hi friends ,
we are geting data load error as; Process 000087 for deterermined fro infoobject DUVTYPE started in STATUS TAB and in DETAILS TAB update(251new/160 chnaged): Errors occured.
what should i know from information and what are the reasons for this load failure and possible rectification methods.
This load is through process chains and aslo a delta load.
Can i delete the request and start the infopackage manually? also will it make my Process chain Green automatically or should i repeat from the subsequent process?
Plz help.
I award points.
regards,
siddarthaHi siddharta,
look in the details of the monitor to see the error. Be very cautious with deltas! They can not be repeated every time. it depends on the datasource! What you can do is delete the failed request from all(!) the data targets meanwhile!
Regards,
Jzergen -
Data load failure with '#'
Hi Experts,
One of our data load is failing with special characteristic '#'.
The exact error records is as follows: 390-166333#New, SUB, Fan 80x80x80mm, 12
We have maintained '#' in RSKC, but still the load is failing.Any reason ?
After editing '#' in PSA and reload fixed the issue.
Can anyone suggest what should be done to fix this.
Thanks & Regards,
Naveen.Hi,
try below field level routine.
DATA: l_d_length like sy-index.
DATA: l_d_offset LIKE sy-index.
DATA: CharAllowedUpper(60) TYPE C.
DATA: CharAllowedLower(60) TYPE C.
DATA: CharAllowedNumbr(60) TYPE C.
DATA: CharAllowedSondr(60) TYPE C.
DATA: CharAllowedAll(240) TYPE C.
CharAllowedUpper = 'ABCDEFGHIJKLMNOPQRSTUVWXYZÄÜÖ'.
CharAllowedLower = 'abcdefghijklmnopqrstuvwxyzäüöß'.
CharAllowedNumbr = '0123456789'.
CharAllowedSondr = '!"§$%&/()=?{[]}\u00B4`*+~;:_,.-><|@'''.
CONCATENATE CharAllowedUpper CharAllowedLower CharAllowedNumbr
CharAllowedSondr INTO CharAllowedAll.
RESULT = SOURCE_FIELDS-ENTITYNAME.
l_d_length = strlen( RESULT )
IF NOT RESULT CO CharAllowedAll.
DO l_d_length TIMES.
l_d_offset = sy-index - 1.
IF NOT RESULT+l_d_offset(1) CO CharAllowedAll.
RESULT+l_d_offset(1) = ''.
CONDENSE RESULT NO-GAPS.
ENDIF.
ENDDO.
endif.
CONDENSE RESULT NO-GAPS.
TRANSLATE RESULT TO UPPER CASE.
Thanks,
Phani. -
Data Loading Question - Urgent
Dear Experts,
I have to load 0FI_GL_4. I want to do an Init with Data Transfer. But,
there are 120+ million records. I want to split the data load into smaller chunks filtered by Fiscal Period For E.g: 199701 - 199712
199801 - 199812......200801 - 200812.
I would really appreciate if someone can guide me how to load the data in chunks. We are in BI 7.0.
Thanks.
Regards,
Jamspam
Edited by: jamspam jamspam on May 27, 2008 4:42 PMHi,
Try to see the record count for some time period like 6 months or a year and split them in such a way that you have a reasonable record count for each data set like 10-15 million and peform multiple inits for those.
You can use RSA3 for this.
Multiple init
Hope this helps.
Thanks,
JituK -
Error in the hierarchy structure - Data Load Failure
Hi
We are having a regular Master data hierarchy Full load: 0WBS_ELMT. This data load is from the SAP R/3 source system. It was failed today with following message:
Error in the hierarchy structure
Node ID 00016749 does not exist.
Node ID 00005867 starts an endless loop
Node ID 00001367 has not been included in the hierarchy
Can any one help me out to solve this issue?
Best Regards,
Venkata.hi,
refer to this thread.
No hierarchy displaying in the Maintain Hierarchies -
Initialisation data load failure
Hi all,
My initialisation data load for 0EC_PCA_3 failed with an error message "Selected No does not agree with transferred no." , the data processing is ok.
I am pasting the shrot dump from the source system below.
Error analysis
An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name " "
on the called page.
Last error logged in SAP kernel
Component............ "SAP-Gateway"
Place................ "SAP-Gateway on host hccr3prda1 / sapgw00"
Version.............. 2
Error code........... 242
Error text........... "timeout during allocate"
Description.......... "no connect of TP opti1 from host hccr3prda1 after 22
sec"
System call.......... " "
Module............... "gwr3cpic.c"
Line................. 5709
ThanksHi Roberto I have requested the data again twice , but this time the error message is different please could you help me with this.
When attempting to access the data of table "ARFCSSTATE ", an internal error at
the database interface occurred.
but when I check the D/B , it is accessible.
may be I have to debug the flow , can u brief me how to debug the flow from R/3.
Thanks -
Hi all,
One of the job that is pulling data from R/3 has failed and the error message that I see in Status section is as below, can you please tell what I should do for a successfull data load. I appreciate your help.
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
in the source system
thanks,
Sabrina.Hi all,
I rescheduled the datapackage and I can see all the records extracted properly but I guess ODS Activation is taking time. The status bar in monitor says
Data successfully updated
Diagnosis
The request has been updated successfully.
InfoSource : Z_PARTNER_FUNCTION
Data type : Transaction Data
Source system: CRPCLNT300
Step by step analysis has everything set to Green, but there is no Error Analysis tab.
but in Details tab....
Extraction, Transfer, Subseq.processing and ODS Activation is still in yellow. Also the total job status on the left hand side is still yellow. What should i do now, please let me know.
thanks all
sabrina. -
Ods to cube data load verry urgent
Hallo ALl,
i have started the int from ods to cube (data packet 1200000) and its talking hell of time there are 85 data packet, can some suggest me how can i seep up the data load.
regards sanjeevhi
1) Stop the load first.check the job log and st22 if htere any shor dumps
2) go to the *8 gnerated infosource...
3) createa New IP.with the option as PSA and datatarget
4) it will take little time but it wont fail..
5) this will process package by package...
hope it helps
regards
AK
Maybe you are looking for
-
Wrong covers downloading to iTunes
When copying my discs to iTunes, most artwork downloads automatically and attaches to the albums, but some artwork simply doesn't appear. In such cases, I scan the original covers and drag the images into iTunes. Fine, most of the time, but on a few
-
HP Laser Printer message saying "System Extension Cannot Be Used"
I am trying to install a laserjet printer but while it was installing, a message came up which read, "'System Extension Cannot Be Used' The system extension, "/System/Library/Extensions/AppleUSBEthernetHost.kext' was installed improperly and cannot
-
I have a macbook 2.1 with 1GB of memory. I have two issues- both related to lack of sufficient memory. Issue#1 is upgrade to LION requires more memory than I have and I d like to upgrade. Issue 2 is that when ever i try to backup to idisk I get
-
Reg - Work Flow Program ( ABAP )
Hi, Pls advise Where i get the Program ( ABAP Code ) in the Work Flow. Example : I need to add one more plant in the WorkFlow .. Thanks Roy..
-
Frustrated by Error 503--Service Unavailable Error
I am currently being frustrated by a Error 503--Service Unavailable error. I have worked with WL 8.x for a couple of years but just set up my first WL 9.x server. I cannot find anything in the logs and am at a loss as to how to proceed. I am not sure