0IC_C03 Data Not Showing in Report
Dear Friends,
We are using SAP BW 3.5. I have a problem with 0IC_C03 Cube.
Problem is:
Data is transfered to BW i can see the data from Cube --> Contents.
But when i create a report i am unable to see only that particaluar data which dont
have storage location.
Can anybody help me why its not showing that specific data which dont
have storage location.
and on other hand we can see the data from Cube -->Contents
Regards,
malik
Yes i am taking care of marker.
all data is ok excep 13 records which have no storage location.
and only these 13 records are not showing in the report and thats why
my stock is not tele with R/3.
Any other hint.
regrds,
Malik
Similar Messages
-
Date not showed when report is viewed in PDF .
Hi,
We have a text field that shows the date on which the report is running.Date is not showed when report is viewed in PDF.But in HTML we can view them . Can any one help me out?
Totally there are four pages for the report.I have observed the PDF driver iin EPM 11.1.2.x is not up-to-date and technically the Date (Text) is there just like in HTML. However, when you increase the View (Zoom in), it eventually does show up.
I have chatted with Oracle Support, and they will not address it with a patch for now. -
SSRS pulls data from ESSBASE cube, data not showing
Dear Experts,
We are connecting SSRS 2012 to Essbase 11.1.3 to pull data from the cube, and having some issues with some members data not showing in the query designer and report, while some have no problem. And we couldn't find a pattern on which members won't show. We are wondering if this is a known issue and if there is a way to solve the problem.
Thanks very much.
GraceHi ,
Check the following:-
1 Check whether you have made the joins properly.
2 Check data at multiprovider level .
3 is data available for reporting in both the cubes
Regards
Rahul -
XMP data not showing up in the custom file info panels when upgraded to CC
For several versions of Photoshop, I have been able to use a modified custom file info panel to input, update, and track psd files. With each version of photoshop there are always some changes in the way the object data is handled. The lastest challenge is:
1. XMP data not showing up in the custom file info panels when upgraded CC from CS6.
2. Raw data is not visible in CC in the File info panel.
3. This occurs in new documents where we create the xmp wrapper while the file template is built.
4. When metadata is manually entered into the file, the data is not added to the XMP wrapper when it is recreated on the save.
5. When a file that was created in CS6 is opened that contains the Metadata in the file info template. It is visible. the Raw data is also visible. Once the XMP wrapper is recreated - write and then close. The data is no longer available. the Raw data will not pull up in the file info panel.
Any feedback or a direction will be appreciated.I have a script that the user runs to input xmp data into a Customized version of the generic file info panel. it is data that is gathered from the user when the psd file is created. once the file is open in photoshop. the information is visible in the File info panel , the raw data, and as a schema addition in the advanced tab.
in CC the nodes and the children of the XMP packet have changed positions. so that the XML -this.XMP.child(0).appendChild(this.createNode())
is no longer the node that can be appended.
Where XML.child(0).elements().length(); would enable the xmlns to be added in CS6
<rdf:Description xmlns:phsa="' + this.namespace + '" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:x="adobe:ns:meta/" rdf:about="" />'
it is visible in CC as namespace in a different arrangement. XML.child(0).child(0).namespaceDeclarations().toString()) and the children are XML.child(0).child(0).elements().length().toString()); There are now 7 child nodes where before there were 1.
with all shifted, the initialize of the values and the delete XMP packet wrapper and create new or the amend to the XMP packet wrapper is undefined. -
LSMW - Read Data not showing in Converted Data
Hi,
I am using LSMW to load data from a flat file (via recording). I have it working except I have one issue. When I display the data in read data all fields are showing. No errors popup when I select convert data. When I select display converted data the last few fields are missing. Any ideas why or how to fix this?
Any help is appreciated as I do not know how to proceed.
Thanks,
Annette
Edited by: Annette Ameel on Dec 4, 2008 5:37 PMHI Bush,
Currently I am also facing the same problem. In "display read data" it is showing all the field values. No error msg in "convert data". But only 2 fields are displaying in "display converted data". not showing any values in rest of the fields. Kindly suggest me how you fixed this problem -
Subreport dropdownlist does not show any report !!
Just finished preparing two reports, rpt1 (Master), rpt2(SubReport), each a separate report works well. after that i added subreport control to rpt1 and went to SubReport properties to add rpt2 ... but ( Use this report as subreport ) did not show
any report in list.Hi,
What happend if you write in the textbox for subreport path, the path, works? what version of Report Builder do you have?
Raymundo Chapa, MCTS http://www.inavant.mx/blog http://projectaserverzone.blogspot.com/ -
SAP Fiori Purchase Requirision data not show
Hi Team,
SAP Fiori Purchase Requirision all configuration i have done.
I am creating Purchase Requirision using t-code me51n. and then that purchase Requirision came in Work Flow properly.
but from Browser http//<IP Address>:<Port> /sap/bc/ui5_ui5/sap/ui5_mm_pr_apv/index.html?backToHome=true data not display.
i have configure proper TS/Task Type id to scenario. but Still data did not showed.
Below is Work Flow Screen
Browser data not showed.
Regards
Pankaj Kamble
Tags edited by: Michael Applebyhi Guys
please guide me
@masayuki : - i used above link and created New launchpad but still data not showed .
i run link http://<IP>:<portNo>/sap/opu/odata/iwpgw/taskprocessing;mo/ScenarioCollection/?$filter=key%20eq%20%27PR_APPROVAL%27
and getting below error message.
<feed xmlns="http://www.w3.org/2005/Atom" xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata"xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices" xml:base="http://SCHANDSOL.SCHAND.CO.IN:8103/sap/opu/odata/iwpgw/taskprocessing;mo/">
<script id="tinyhippos-injected"/>
<id>
http://SCHANDSOL.SCHAND.CO.IN:8103/sap/opu/odata/iwpgw/taskprocessing;mo/ScenarioCollection/
</id>
<title type="text">ScenarioCollection</title>
<updated>2014-07-03T10:45:25Z</updated>
<author>
<name/>
</author>
<link href="ScenarioCollection/" rel="self" title="ScenarioCollection"/>
<entry>
<id>
http://SCHANDSOL.SCHAND.CO.IN:8103/sap/opu/odata/iwpgw/taskprocessing;mo/ScenarioCollection(SAP__Origin='SCHANDECCDEV1',key='PR_APPROVAL')
</id>
<title type="text">
ScenarioCollection(SAP__Origin='SCHANDECCDEV1',key='PR_APPROVAL')
</title>
<updated>2014-07-03T10:45:25Z</updated>
<category term="taskprocessing.Scenario" scheme="http://schemas.microsoft.com/ado/2007/08/dataservices/scheme"/>
<link href="ScenarioCollection(SAP__Origin='SCHANDECCDEV1',key='PR_APPROVAL')" rel="self" title="Scenario"/>
<content type="application/xml">
<m:properties xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices">
<d:SAP__Origin>SCHANDECCDEV1</d:SAP__Origin>
<d:key>PR_APPROVAL</d:key>
<d:number>0</d:number>
<d:title>PR_APPROVAL</d:title>
<d:targetParams/>
</m:properties>
</content>
</entry>
</feed>
Regards
Pankaj Kamble -
Hi
I have an Infocube that has data (ready for reporting) loaded from APO Livecache.
I'm running a BEX report that gets data from that cube, and for some reason the value for one Key figure is not showing up.
It's there in the infocube, but is not showing up on the report. The column for that key figure is just blank.
What can I check or do to see the value there?
Thanks!
PoojaHi
There are no restrictions or conditions on the KF and it is running on a single Infocube.
There are non-zero values in the cube.
The field level authorizations are also fine...
we used to be able to see the values when we last ran this report 2 weeks back.
There's a calculated key figure that is a sum of this key figure that's not showing up and another one. It is showing the aggregate value correctly! Eg:
KF not showing up: Production Planned
2nd KF : On Hand Stock
Calculated KF Ending Inventory = Production Planned + On Hand Stock
Although Production Planned is not showing up in the report, I checked its value in the cube and the Ending Inventory value is summed correctly in the report. -
Data in infoobject not showing in report
Hi,
I have this situation. I can see cost center number in variable screen but the number is not showing when I run the report.
thanksHi,
I would suggest you try to see if the data is being populated in the cube for the particualr infoobject.If it is not populated in the cube itself,then check the filters inthe start routine,transfer & Update Routines. If its populating the data then,try to run the query on the same selection criteria and verfiy.This way you can confirm if its the loading into the dataprovider or on the front end that needs to be fixed.
hope it helps -
Hi All,
I'am facing peculair issue, We have an issue where inventory is showing in -ve.
From 2LIS_03_BF we are loading the data to DSO, from DSO again to Cube.
I can see Reocrds in Cube for a certian Plant , Storage Location and Material combinations....when I gave same selection criteria in Report the records are not shown in Report. I have checked Query designer too if there are any condition applies but there are no conditions as such expet Special Process Indicator K is excluded.
so i checked Special process indicator for that material but its not K.......its Blank.
Inorder to recover the issue, I have selectivdely deleted the material, Plant and Storage location combination and reloaded the data to cube and compreessed the request without checking No marker Update.
Please need inputs here.
SujanRHi,
Use 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM to 0IC_C03 Cube and design the report.
Use :See the steps how to load the data to 0IC_C03.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
See some importent SAP Notes in Invventory Lods.
Note 747037 - Update of before images in ODS objects
Note 752492 - Non cumulative keyfigures are incorrectly allowed in ODS
Note 581778 - ODS capability of extractors from inventory management
Note 684465 - BWVORG for purchasing data sources
Note 417703 - Missing duplicate record during extraction with 2LIS_03_BF
Note 929378 - 2LIS_03_BF, 2LIS_03_BX, 2LIS_03_UM and BI 2004s
Note 745788 - Non-cumulative mgmnt in BW Verifying and correcting data
Note 352762 - Collective note purchasing extractors and setup
Note 353042 - Howto Activate transaction key (PROCESSKEY)
Note 352344 - Process key + reversals in Inventory Management
Note 586163 - Composite Note on SAP R3 Inventory Management in SAP BW
Thanks
Surendra Kumar Reddy Koduru -
Please show this query, data not showing why?
I created a report and write following query,it was working well since last 4 months but today automaticly not showing data I can undertstand why?
Becuase I didnt make any changes in this query.
Please help me
Urgent
SELECT ALL MERCH_ORDER.ORDERNO, MERCH_ORDER.ORDERDATE, MERCH_ORDER.SHIP_DATE, MERCH_ORDER.PONO,
MERCH_ORDER.SUBPP, MERCH_ORDER.PJNO, BUYER.B_NAME, BUYER.B_AJENT,
MERCH_ORDER.ITEM, MERCH_ORDER.FABRIC, MERCH_ORDER.QUALITY, MERCH_ORDER.COMPOSITION,
MERCH_ORDER.P_SIZE, MERCH_ORDER.QUANTITY, MERCH_ORDER.Q_UNIT,
MERCH_ORDER.NETWHT, MERCH_ORDER.WT_UNIT, MERCH_ORDER.TERM, MERCH_ORDER.COMM,
MERCH_ORDER.PRICE, MERCH_ORDER.CUR_SYMB, MERCH_ORDER.STATUS, MERCH_ORDER.REMARKS,
MERCH_ORDER.WONO, MERCH_ORDER.PRONO, MERCH_ORDER.PES_QUANTITY,
MERCH_ORDER.PES_Q_UNIT, MERCH_ORDER.PES_PRICE, MERCH_ORDER.PES_CUR_SYMB
FROM BUYER, MERCH_ORDER
WHERE MERCH_ORDER.CANCEL IS NULL
AND (MERCH_ORDER.B_CODE = BUYER.B_CODE)
and merch_order.orderno not in
(select export_order1.orderno from export_order1)
ORDER BY MERCH_ORDER.ORDERNO
there is no any error and msg header and footer print.Maybe , the query in "NOT IN" clause select export_order1.orderno from export_order1
return the same rows as the following portion return....
SELECT ALL MERCH_ORDER.ORDERNO, MERCH_ORDER.ORDERDATE, MERCH_ORDER.SHIP_DATE, MERCH_ORDER.PONO,
MERCH_ORDER.SUBPP, MERCH_ORDER.PJNO, BUYER.B_NAME, BUYER.B_AJENT,
MERCH_ORDER.ITEM, MERCH_ORDER.FABRIC, MERCH_ORDER.QUALITY, MERCH_ORDER.COMPOSITION,
MERCH_ORDER.P_SIZE, MERCH_ORDER.QUANTITY, MERCH_ORDER.Q_UNIT,
MERCH_ORDER.NETWHT, MERCH_ORDER.WT_UNIT, MERCH_ORDER.TERM, MERCH_ORDER.COMM,
MERCH_ORDER.PRICE, MERCH_ORDER.CUR_SYMB, MERCH_ORDER.STATUS, MERCH_ORDER.REMARKS,
MERCH_ORDER.WONO, MERCH_ORDER.PRONO, MERCH_ORDER.PES_QUANTITY,
MERCH_ORDER.PES_Q_UNIT, MERCH_ORDER.PES_PRICE, MERCH_ORDER.PES_CUR_SYMB
FROM BUYER, MERCH_ORDER
WHERE MERCH_ORDER.CANCEL IS NULL
AND (MERCH_ORDER.B_CODE = BUYER.B_CODE)
OR
there are no rows which conform to the joining condition between the two tables BUYER and MERCH_ORDER ....
Regards,
Simon -
DESCRIPTIONS ARE NOT SHOWED IN REPORT PAINTER
Hi, I have a problem with the report painter, because i am run the report but i realize that if the master data(Commitment item ) is not created for the next year example 2008 and I am running the report for the year 2007, when the report is generated the report does not show the description of the commitment item ...
Anyboy has a suggest
THANKS A LOT!!!
PatHello sayujya Patil,
Thanks for your reply, i have created report in Report Painter, after execution the report i tried in all the parameters under setting menu > report and section layout as well> lead column --> and kept the radio button on key and description, still its not showing the description of the GLs under lead column....
Please reply...
Thank You. -
Data not showing correctly !!
Exprets !
I have problem , may be i am not able to understand or may be data is wrong ..
We have a sales group for each customer. means sales group is an attribute of a customer.
In my couple of reports, if i pull sales group , i can see for some customer there is "# not assign"
means, in the transactional data there is not sales group entry . thats understood....
Bcoz of that, we have another Free char. which is nothing but, a nav. attribute. (zcustomer_zsales_group ).
I checked in the master data of customer, that for those customer sales group is not showing up in the report ..
has a sales group entry in customer masterdata....
So, if i pull sales group from master data ( Nav. Att. ) then in the report it should show me sales group for that customer.....I know in this case it wont be a trascational data but master data...but atlest i will have something instade of # not assign.
But NO luck, there also not assign...( EVen in Master data there is a sales group assign to that perticular customer...)
There are 15 -20 customers like that, where i m not able to see sales group..
Any thoughts ???
please help.
ThanxMay be the Customer values(transaction values) are corrupted, means that the incoming customer transaction data (for those 15-20 records) may not be same values as in Customer master. Some times the padded 0's will be missing in transaction data and hence it cannot find the appropriate customer in the master data.
eg: lets say if the master data customer has value 0000100056 , but the incoming transaction data has customer value say 100056. In this case, it will not find the appropriate entry in master data. -
Custom Groups not showing in Reports
Hello,
Per our reporting requirement, I have created few groups in Authoring pane. However, when I am going to select those groups in reporting, its not showing up.
Env: SCOM 2012 R2.
Any help is appreciated.
Thanks,
Binoy DasHi,
It seems like that there is a sync issue/latency between the operational database and the data warehouse in your case. Groups should appear in the data warehouse within just a minute or two in most environments. Check errors and performance on
your management servers and sql servers.
Do you see any error or warning Events in the OperationsManager Windows Event log on one of the management servers which could be related to db issues?
Regards,
Yan Li
Regards, Yan Li -
GL Data not available on report
Hi All,
I have a report which has been working fine. The report was based on cost for controlling cube which is based of WBS elements(cost).
Now the report has been added with a column which gets its data from GL cube. I have added the 2 cubes in a multiprovider but cannot see the data for the column from GL.
This same GL cube is being used on multiple other queries and has no problem.
What could be the reason for the GL data not being displayed. I have also restricted to the respective infoproviders.
Appreciate all the help.
Kind Regards
Jameshi,
first of all check in tcode LISTCUBE for MP if you are getting data for any of the columns from GL cube.
also check the characteristics from controlling cube and GL cube which are common and whether they have the same length , data types and values. The join at the MP level may not be working correctly which is why the data may be missing.
regards,
Arvind.
Maybe you are looking for
-
I just downloaded LR 5.7 on my new MacBookPro computer. I did not set up any presets or anything at all, for that matter. When I import a photo, it changes in exposure automatically. Two stops overexposed!! I never had that issue with my other LR pro
-
Automatic transfer of Shared Library: does it "catch-up" when Mac back on?
I setup this feature and it works great, although it seems that both computers must be on and iTunes running for it to work. Now, if the Mac (or PC) that "subscribes" to the main Mac's library (where I purchase music) was turned off, does it "catch-u
-
BADIs are not calling in BUPA_MAIN
Hello Friends, I need to populate some Z fields when BDOc is flowing. I thought of writing this logic in BADIs (CRMXIF_PARTNER_MAP & CRM_DATAEXCHG_BADI ) . But these BADIs are not calling in debugging to check the data. Please let me know do i need t
-
B2B-51075 Missing signer certificate receiving AS2 through reverse proxy
We are setting up AS2 communication through B2B on 11.1.1.6.7, Our reverse proxy configuration in the DMZ looks as shown: <Location /b2b/httpReceiver> WebLogicHost internalsoa.domain WebLogicPort 8001 WLLogFile /dmz/logs/wl-proxy.log SetH
-
G530 Motherboard/CPU Upgrades?
Hi all, My girlfriend has a G530 that I just had to pull apart after it took a little bit of a swim. Aside from needing a keyboard nothing was damaged, but I noticed something interesting while I had it apart: Next to the northbridge there are what a