0IC_C03 delete requests when source system is deleted

Hi All,
I have a problem with my stock cube 0IC_C03. I want to delete a compressed request in this cube. The problem is that the original sourcesystem from which this request is loaded does not exist anymore. Therefore the system gives me a shortdump.
The general message is timeout during connect, which is correct because this system does not exists anymore.
Is there a way to delete this data ?
Best Regards
Marcel

Dear Marcel ,
If source system is not available and you loaded with PSA, the system would give a dump, the better way to handle is delete the entire data from the infocube and do a init again with BX and from there on with BF. this is important as Inventory infocube uses Marker Update for giving the stock details from time to time...
Thanks,
Krishna

Similar Messages

RE:JOB TERMINATED IN SOURCE SYSTEM.

Hi Gurus,
In production environment while we are trying to load data we recived follwing error message.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
We tried RFC checks, repliacted Data source and activation in BI and all other checks.It seems all OK in BI.When we tried to activate the Data Source in CRM(back end) transation RSA5 its prompting for Work Bench request.my question is are we allowed to create work bench request in production environment? This happens to us even in BI when we try to run an Info package manually I.Can you please advise me what could be othr reasons for the job failure.

Hi
We tried RFC checks, repliacted Data source and activation in BI and all other checks.It seems all OK in BI.When we tried to activate the Data Source in CRM(back end) transation RSA5 its prompting for Work Bench request.my question is are we allowed to create work bench request in production environment? This happens to us even in BI when we try to run an Info package manually I.Can you please advise me what could be othr reasons for the job failure.
Hope you have checked RFC at Source system side SM58/59/66 and IDOCs BD87,WE05 also.
Yes some times it will prompt the Work Bench Request at Source system side too. But do not create any new request for this. Try to see for the Request locks -- Check back with BASIS team for this-- Happens if the 2 or more process/jobs trying to hit at same point this will happen.
Better to cancel/delete the present request and Repeat Delta.
Hope it helps

Deletion of request from init option for source system

Hello Experts,
Iam using 3 IP.
IP for init load with data transder, IP for init load without data transfer & Delta.
now with data transfer IP is not used.
i trigered "without data transfer IP", then accidentally "triggered with data transfer IP".
then manually made the request red & deleted data by right clicking datasource-->manage & deleted all the requests(2) available.
now before i load init without data transfer request exists in "init option for source system".
when trying to delete IP
"There are active init selections in source system for this data source. Therefore, only ALL init selections can be deleted at once. Do you want to delete all init selections (all channels)?"
when i choose yes....it takes a long time & gives run_time error status.
Guys, this issue is solved.
I deleted the without data transder first.
now when I load delta, I got error.
"Job terminated in source system --> Request set to red"
regards
KV
Edited by: K V on Apr 10, 2009 2:16 PM

Hi KV.........
U r doing init without data transfer..............it means it will not pick any records...........it will just set the init pointer and along with that Delta queue will get generated.........after that whenever any changes will be done.........or any new records will come.......it will get reflected in the Delta queue.......
So next time when u run the delta load..........data will be fetched from the Delta queue...........
So check the delta queue.......it may happen that there r no new or changed records..................
So check............may be delta queue is 0..............
Also check the update mode for the datasource in LBWE(if Logistic datasource)............if the update mode is Queued delta or unserialized V3 update........then data will first get accumulated in the Extract queue(LBWQ) or update table respectively.............so to fetch records in the Delta queue u hav to schedule the V3 jobs in LBWE............otherwise Delta queue will be empty and fetched records will be 0........
Regards,
Debjani......

Delete the records in ODS when there is deletion of record in Source system

Hi,
Actually i am pulling table thru DBConnect and loading the Data into ODS as Full Load.
Because the volume of Records are huge we need to go for Delta enabled.
But the problem i have is that in source system daily they are deleting some records.
Pls guide me.
Regards
Mano

FYI: I think the pad lock you see in the tab doesn't mean your tab is locked. It means the site you are visiting is using HTTPS (a more secure portocol)... as in Safari is telling you that internet connection to the site you are visiting is safe

Deleting a Source System Connection

Hi all,
We made some updates to a QA source system and when we try to do a 'activate and replicate datasources', errors are being thrown out. So, we decided to delete the connection and recreate the connection. I have a few questions:
1) If I right click on the source system in BI and click delete, it is prompting for a transport request to delete transfer structures. What are the steps to follow in deleting the source system? How will I be able to rebuild the transfer structures?
2) I deleted a couple of transfer structures. Can I roll it back? If yes, how
Greatly appreciate your help.
Anita.

instead try to trouble shoot the issue with the source system creation.
i don't beileve you can easily recover a deleted transfer str / rule without recovering from a backup or transporting it again from dev, once the sourcesystem issue is resolved
i believe this source system definition has been there for a while therefore just deleting it outright is not recommended for a lot of reasons,,,,,,,

Deleting a Source System in BW Prod

Hi Guys,
I am trying to delete the assignment of R/3 Production as a Source system in BW Prod but the system is not letting me- informing that:
Package ZBWD does not exist- choos display object or cancel.
The reason I am doing this is at present the source system is assigned to Infoobject 0WBS_ELEMT but I want to assign the 0WBS_ELEMT_ATTR & 0WBS_ELEMT_TEXT datasources to the 0WBS_ELEMT_ATTR & 0WBS_ELEMT_TEXT InfoSources. I would like to un-assign this datasource from 0WBS_ELEMT and assign to the InfoSources stated above.
I am trying to bring in WBS Element master data but found in Dev when I bring it in through the infoSources it is available in BW but through the 0WBS_ELEMT infoObject there is no data in the masterdata tables.
How can I delete this source system assignment in BW Prod?
Thanks
Depesh

hi Depesh,
i think system won't let you delete source system assignment in prod if it's closed for modification
(transaction scc4), if you really need to do this directly in prod, please ask basis open awhile,
have you tried delete the source system assignment in dev and transport to prod ?
regarding package zbwd not exist, check in prod if package zbwd exist,
transaction se80, choose 'package', type in zbwd,
it will display the package or ask to create new if not exist. transport package zbwd from bw dev if it's not exist in prod.
hope this helps.

How to Delete a Source System from BW System

Dear All,
I have a request to delete a UDC based source system from a BW system. Can you please let me know the steps to be followed to delete a UDC source system.
It would be helpful if you provide steps to delete a SAP Source system also from a BW system.
If there are any such documents for both the cases, please provide me the link.
Thanks to all.
Regards,
Karthik
Please search the forum before posting a thread
Edited by: Pravender on Mar 11, 2011 6:19 PM

Hi,
      Go to RSA1 T-code
      Click on source System on Left window
      select the Source System
      right click on it and Delete.
      click yes if you want to delete the PSA table as well
Best Regards
Obaid

How to delete a source system in BW?

Hello All!
Can anone please inform me about the procedure to delete a source system or inform me in which document i can find this information. Actually i wish to assing my newly installed BW3.5 system to a new logical system (i.e) its currently assigned to some other logical system where it has ME as default source system. to change the logical system we need to delete all the source systems in the old logical syste. So please explaing me how to delete the source system Myself(current BWsystem). there is no data and no data sources existing in the system its abosolutly fresh.
Thanking you for help in advance
with regards
Ashwin Kumar Gadi

Hello Roberto!
Thanks for ur response. But there bo such delete option available under the context menu for the source system for the Myself source(current BW). only change buton appears but when we click that it say changes are no posible. Is the any other way to delete it manually.
with regards
Ashwin

How to delete Source system

Dear All,
I have created Logical system and assigned it to client. After that when you go to RSA1 , system automatically creates Source System of BIW .
Now I want to use the different logical system for that I want to delete this automatically created BIW self source system which I am not able to do becuase in Context Menu Delete option is not Visible.
Please guide me immediateley.
regards
Vishal

Hi Vishal,
Refer these posts. Probably they help you!!
Re: How to delete a source system in BW?
Re: Source system deletion
Bye
Dinesh

Source System Deletion Process in BW

I deleted the Sourse system (NQ2) in BW sandbox server (BSN) using RSA1 with right click option. During this deletion process, it deleted all the dependent objects. Now i connected BSN system to another Source System (NSB) and replicate and activate the datasource successfully.
Now when i checked the infosources in RSA1, say 2LIS_13_VDITM, no datasouce is assigned to this infosource. I can manullay assign the datasource.
is it the right approach to delete the source system and connect to another source system? Do i have to manually assign the source system to all inforsources?
Regards
Amarjit

Hi,
it wasn't necessary to delete your old source system. By doing so you have deleted all independant objects: transfer structures, transfer rules and most important, your PSA data which could be used for testing.
You could have kept your old source system to use it a template.
For instance it would have been possible to recreate all your TRules like for like from your old source system with a special transport by collecting all source system dependent Objects with a "save for system copy".
You would have saved a lot of work!
hope this helps...
Olivier.

Source system appearing in BI folder : Not able to delete entry RSBASIDOC

Hi all,
Iam creating source system connection from ECC to BI system.
But the source system appearing in BI folder all the time, i found one note 1087980 and tried deleting an entry with SRCTYPE = M from RSBASIDOC table with FM RSAP_BIW_DISCONNECT , but the system shows error message OTHER_ERROR and the entry does not get deleted.
For this SAP recommended to check a valid RFC connection between ECC and BI system , i have checked it and the RFCs are working fine for it also.
Please help.
Regards,
Akash.

follow this steps:
In the source sytem
SE37 e launch the FM RSAP_BIW_DISCONNECT
you will find the BIW and OLTP log on the RSBASIDOC
So run the FM.
IF you find the OTHER_ERROR, may you have to check the RFC connection. (If the source system was been refreshed, you have to create a RFC to PROD).
You should encounter this error ( Not able to delete entry RSBASIDOC), when you try to restore the DS: in this case infact, is the IDENTIFIER (TSPREFIX) that creates problem (so you have to delete the relevant entry from the table).
CIao,
Cristian

Deletion of source system after an upgrade : consequences ?

Hello,
I'm a sap basis guy.
We have a SAP BI 701 sytem mapped to our 4.7 Non Unicode source system.
I have now perfromed the unicode migration and upgrade to ECC6 of the source system on another server.
It means now, that I have two sourtce systems with exactly the same SID, and logical name.
Sicne the BI connexion in RSA1, is based on the logical system name , I have no ther choice than delete the old
source system, and recreate it with the same logical name but different connexion parameters (hosts, ...) and differentversion (
I have talked with the BI team, but thnigs are quite unclear about the consequences of deleting a source system in RSA :
Do all Transformations/ Transfer Rules between DataSources and targets are deleted ?
Does it mean that they have to be manually recreated after the new source system has been recreated ?
Is there any workaround ?
Thank you in advance for your help.
Regards.

Hello,
If you do not save the source system dependent objects to a transport request before you delete the connection then the objects will be lost , you can avoid this by saving the objects to a transport request and then release the transport before you delete the connection and import it in the new system, the steps in general are below:
RSA1
Transport Connection
Button 'Collection mode' set to 'start manual collection'
Press 'Source system assignment' button (it's the one left of the
'Request BEx' button)
Select the source systems you want to save the transfer rules for
Continue
Button 'Grouping' set to 'Save for system copy'
At the left border click on 'Object Types'
Extend tree 'Source system' LSYS
Double click on 'Select objects'
Select the source systems you want to collect objects for
the source system is now displayed in the right box
Press collecting button ('gather dependent objects')
this may take a while
Right click on the root of the tree and select
Transport all below
Expand the whole tree and check if there isn't an object which is locked
by an other open transport request !!
(the column 'Transport request' has to be empty (BEFORE deleting the corresponding source system
connection!)
Best Regards,
Des

Initialization Flags deleted from Initialization options for Source System

Hi BW Experts,
We have loaded PCA data in Infocube last week with Fiscal Year/Period Selection Parameters like
001.2004 to 016.2004
001.2005 to 016.2005
001.2006 to 016.2006
001.2007 to 016.2050
So we got 4 Initialization flags in Initialization options for Source System in SCHEDULER.
After this we are running Deltas daily
Accidentally All Initialization Flags deleted from SCHEDULER yesterday that we did not know yesterday.
Deltas did not run today.
Please can anyone tell me the solution for this.
I have to run the Delta today. How can i get the yesterday records in my Data Target,
Thanks & Regards,
Anjali
Message was edited by:
Anjali

Hi Anjali,
Please delete the Init Request from your data target performed for Selection 001.2007 to 2050.
Also delete <b>only those deltas request</b> from your Data target <b>which were performed after the above mentioned Init.</b>
And then Re-Init with Selections on Fiscper - 001.2007 to 2050.
Thanks
CK
Highlighted
Chitrarth Kastwar

Can I delete 'Initialization Options for Source System' in Process Chain?

Hi All,
Can I automate the process of deleting the 'Initialization Options for Source System' for Delta Init package? I need to include this step in a process chain, rather than deleting the init request manually.
Thanks,
Naveen.

Naveen,
As far as I know, nope. And it's logical, considering the Initialization is a "one time" process and not a repetitive one (unless you have to reinitialize, of course...)
Regards,
Luis

How to delete source system in BI system

Dear Experts ,
recently we finished client copy in BI production system to quality system,
now we are facing problem with source system connections in bI system
in RSA1 APO production system's source system is comes to BI quality system now i need to delete that APO source system in BI quality system ..please let me the process how can i delete source in BI quality
can i delete it as below
log in into BI quality system --> RSA1 --> select source system which i need to deletse --> right click & delete
or we have any other process to delete it.
Regards

Hi Swathimatta,
Apart from the two ways to delete the source system:
1.- log in into BI quality system --> RSA1 --> select source system which i need to deletse --> right click & delete
2.- Execcuting the FM 'RSAP_BIW_DISCONNECT.
If you cannot delete the source system:
Use fuction module RSAR_LOGICAL_SYSTEM_DELETE to delete
the source system:
1 - Go to SE37.
2 - Run fuction module RSAR_LOGICAL_SYSTEM_DELETE.
3 - Fill with the parameters as mentioned below:
      I_LOGSYS          = FUENTE
      I_FORCE_DELETE    = X
      I_NO_TRANSPORT    =
      I_NO_AUTHORITY    =
Or follow the recommendations from note 140276, Solution 2:
"You cannot delete the source system. Two cases have to be distinguished:
    o The source system still exists.
       Switch to Transaction SM59. Find the destination which has the
       same name as the logical system of the source system from field
       SLOGSYS in table RSBASIDOC (see above).
       - Such a destination does not exist in Transaction SM59. In this
          case, you have to create the destination to the source system.
          Name the destination equal the entry in SLOGSYS from above.
          Then return to the Administrator Workbench and repeat the
          deletion.
       - The entry exists but a remote login is not possible. Correct
          the communication parameters.
       - Everything works. Change to Transaction SE37, function module
          RSAR_LOGICAL_SYSTEM_DELETE, Sngl. test. Parameter I_LOGSYS =
          <log. name of the source system>, I_FORCE_DELETE = 'X'.
    o The source system no longer exists or was replaced with another
       source system with the same IP address.
       Proceed as described in the first case but make sure, that the
       field 'Target host' contains a not existing server in the
       maintenance screen of the destination (Transaction SM59). If
       necessary, change an existing entry. Later when you delete, the
       system asks you whether you want to delete, although the source
       system is not available. Select 'Ignore'. "
I hope it can help you.
Regards,
Fran.

0IC_C03 delete requests when source system is deleted

Similar Messages

Maybe you are looking for