0IC_C03 - Reason behind taking ECC down

Hello all.
I am in the process of loading 0IC_C03 following steps recommended on How to: Inventory Management - Data Loading and also on SAP Help Material Movements].
Though there is a step I am wondering why is it needed:
- Shut down ECC
think in other How to´s is also mentioned that step and added something like "depends on how size of data in ECC".
- Is it really needed to shut down ECC when loading 0IC_C03 ?
- Is it also necessary for LO cubes/ extractions ?
- Is because of users not posting ?
Thank you,
Alex
Edited by: Alex M on Aug 9, 2010 8:00 AM

hi suman,
thanks for the response, and i did repair full load, but still there are some issues that some MATERIAL DOCUMENTS are not coming to BW.
what is the best practice to extract all the material documents into BW.
though the deltas are happening to BW system daily, in SMQ1 it shows.
BW1002LIS_03_BF          CEP900                                   3
MCEX03                             NONE                                   103
regards
venuscm
Edited by: venu WAD on Sep 16, 2011 7:13 AM

Similar Messages

  • I bought whatsup on 5th of june and my account has been debited for INR 60.  Today(8th june) again my account has been debited for INR 55.  I want to know the reason behind it?

    i bought whatsup on 5th of june and my account has been debited for INR 60.  Today(8th june) again my account has been debited for INR 55.  I want to know the reason behind it?

    You could go to the app store on your phone then tap on the update button bottom right then tap on purchases at the top and see what has been bought on your phone also you could goto itunes in you romputer and click on your account once itunes store has been selected from the left then click on account and enter your password and scroll down to Purchase history and click on "see all" and have a look at recent purchases

  • I love my Verizon, yes I really love my verizon that the only reason behind this story

    Hi there,
    I love my Verizon, yes I really love my verizon that the only reason behind this story but the service made me hate the same Verizon. When I took the Verizon connection I was so happy because I am doing a right thing. but now I feel the same that I have done a wrong thing.
    1. Gift Card is reaching me till now.. hope I will get it when my contract ends!!!
    I ordered this FiOS service by February and got a offer of 200$ gift card from Best Buy... I am getting the card till now.. no tracking.. no response... whenever I call them the response is really very nice. the call will be on hold for about an hour and then a voice will come then I have to explain the situation for about 20 mins, then he/she find the gift card is delivered to some other address. Then give me a waiting period of 3 weeks. I have waited atleast 5 * 3 weeks, between these period of time atleast 20 calls to you guys.
    Don't you think how lucky I am... ha
    A GREAT customer service.. which made me so happy. Thank you one and all.
    2. Billing Issues:
    I took a plan called FiOS freedom bundle offer. It costs  $ 94.99 when I ordered, but later I came to know that is excluding taxes, that is fine so the total expected was some where around 105 to 110 $. But how great it worked for me... I haven't paid that less amount till now. see how much I paid till now...
    Month Amount
    March $189.53
    April   $120.07
    May   $120.07
    June  $113.40
    July   $113.39
    and now the story begins again...
    August $152.83
    Whenever I call the customer care to ask clarification they will tell "**this will not be charged from next month". But there will be no answer why that was charged. I never even thought of writing this big story to some one like you but I am really sorry to say if this continues then your business will never endup in success.
    Please consider this as me one and only request and do something.
    $200 worth of Best Buy gift Card and
    Take away all the additional options in my package and give me the bundle offer bill I ordered $94.99 + Taxes. I wont encourage paying not even one dollar more than that.
    With lots of worries on my ever best Verizon,
    James {personal information removed for privacy}
    Message Edited by CharlotteS on 08-14-2008 08:35 PM
    Solved!
    Go to Solution.

    Since this is a user Forum, James, you'll probably need to contact Verizon again.  Contact Us  
    The only thing I can offer is this link:  http://www22.verizon.com/awaitingfreereward/  
    Good luck and sorry we couldn't be more of a help.

  • For some reason when I shut down my computer then turn it back on, it comes back directly into my account, bypassing having to enter a password to get into my account.  This works in direct conflict with the parental controls I've got set up.  Any ideas?

    For some reason when I shut down my computer then turn it back on, it comes back directly into my account, bypassing having to enter a password to get into my account.  This works in direct conflict with the parental controls I've got set up.  Any ideas?

    Thank you so much for the quick response to my question.  I tested your directions and it works!!  Thank you.  I would never have figured that out.  I knew I had to go into System Preferences but would not have guessed that I needed to have Automatic Login set to off. 

  • Could you tell me what is the reason behind all this?

    Hi
      Zp0001, we have 510 pcs in stock, but for some reasons we can’t commit the orders that we have on the system. When we go into a xyz order 308 for example), the system commits only to February, even if we could do a partial shipment.
    Could you tell me what is the reason behind all this?

    Please look into availability check for that particular material,
    based on the availability check the system determines whether to
    confirm the sales order (if the sales order qty > inshe stock (either
    rejection/partial confirmation - depends upon the availability check),
    followed by determination of delivery date

  • Reason behind this query ,SELECT * FROM table WHERE 1 0

    HEllo,
    I would like to know the reason behind using this query ,
    SELECT * FROM <table> WHERE 1 < 0
    before executing the actual SQL query.
    Is there any special reason or the JDBC receiver side is configured like that.
    Is there any option to overcome this process like, can we remove this option or stop using this.
    Why the JDBC adapter basically sending this query on the DB?
    Thanks,
    Soorya,

    Hi,
    if you run this query, you wont be able to see any records of the table.
    SELECT * FROM <table> WHERE 1 < 0
    if you run this query you will see all records
    SELECT * FROM <table> WHERE 0 < 1
    same with SELECT * FROM <table> WHERE 1=1
    So you can check this out that whats happening in your code before executing actual query. just try to co-relate.
    regards
    Aashish Sinha
    PS : reward points if helpful

  • Reason behind Difference in cardinality from estimation.

    Hi,
    Below is the plan and the dbms_xplan.display_cursor out put for the same. I am getting difference in cardinality estimation which is major one. What must be the reason behind the same. i have verified that all the stats for index and table are updated.
    SELECT
            XDS_XCHGTRANSACTIONID,
             XDS_TXSTATE,
             XDS_ACTIONDATE,
             XDS_INBOUND,
             XDS_DOCTYPE,
             XDS_DOCSUBTYPE
        FROM a, b, c   WHERE     b.XCHGPROFILEPK = a.XDS_XCHGPROFILEPK
             AND b.PAYID = c.PAYID
             AND a.XDS_TXSTATE IN ('PARTIAL', 'COMPLETE', 'PENDING')
             AND CREATINGAPP = 'DISB'
             AND COMPANYPK = 15144193056
             AND a.XDS_ACTIONDATE BETWEEN 1337890976198 AND 1338392336151
             AND a.XDS_YEAR IN 2012
             AND a.XDS_MONTH IN 5
    ORDER BY a.XDS_ACTIONDATE
    Index IDX_XDS_N1 is on a(XDS_MONTH,XDS_YEAR,XDS_ACTIONDATE)
    | Id  | Operation                      | Name                    | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads  |
    |*  1 |  TABLE ACCESS BY INDEX ROWID   | c                       |      1 |      1 |      0 |00:00:00.68 |    2284 |    405 |
    |   2 |   NESTED LOOPS                 |                         |      1 |      1 |      1 |00:00:00.68 |    2284 |    405 |
    |   3 |    NESTED LOOPS                |                         |      1 |      1 |      0 |00:00:00.68 |    2284 |    405 |
    |*  4 |     TABLE ACCESS BY INDEX ROWID| a                       |      1 |      1 |      0 |00:00:00.68 |    2284 |    405 |
    |*  5 |      INDEX RANGE SCAN          | IDX_XDS_N1              |      1 |      1 |   2280 |00:00:00.12 |      30 |     28 |
    |*  6 |     TABLE ACCESS BY INDEX ROWID| b                       |      0 |      1 |      0 |00:00:00.01 |       0 |      0 |
    |*  7 |      INDEX UNIQUE SCAN         | P_XCHGPROFILE           |      0 |      1 |      0 |00:00:00.01 |       0 |      0 |
    |*  8 |    INDEX RANGE SCAN            | IDX_PAYID               |      0 |      1 |      0 |00:00:00.01 |       0 |      0 |
    Predicate Information (identified by operation id):
       1 - filter("COMPANYPK"=15144193056)
       4 - filter(("XDS_TXSTATE"='COMPLETE' OR "XDS_TXSTATE"='PARTIAL' OR "XDS_TXSTATE"='PENDING'))
       5 - access("XDS_MONTH"=5 AND "XDS_YEAR"=2012 AND "XDS_ACTIONDATE">=1337890976198 AND
                  "XDS_ACTIONDATE"<=1338392336151)
       6 - filter("CREATINGAPP"='DISB')
       7 - access("XDS_XCHGPROFILEPK"="XCHGPROFILEPK")
       8 - access("B"."PAYID"="C"."PAYID")

    930254 wrote:
    Hi,
    Below is the plan and the dbms_xplan.display_cursor out put for the same. I am getting difference in cardinality estimation which is major one. What must be the reason behind the same. i have verified that all the stats for index and table are updated. Can't say based on what you have posted so far. Some suggestions/questions:
    1) Do you get same difference if you simplify the query so that it includes only one table (i.e. a) with predicates on that table?
    2) DB Version ?
    3) Is XDS_ACTIONDATE supposed to be a date stored as NUMBER?

  • HT5622 I have Purchased a song through iTunes which cost is 15 Rs.But the bank has debited 95rs from my account .Let me know the reason behind that?

    I have Purchased a song through iTunes which cost is 15 Rs.But the bank has debited 95rs from my account .Let me know the reason behind that?

    We are itunes users just like you.  We would have no idea why.
    Contact itunes support and ask them.

  • What can be the reason behind getting the Dialer Detail

    what can be the reason behind getting the Dialer Detail
    CallResult = 2 "Error condition while dialing"

    Sorry buddies, for bothering you, without providing enough details.
    We are running Java based ERP for our client, with Oracle Application Server 10.1.3.1.
    OS is Sun Solaris 10
    Database is Oracle 11g
    We found the following errors in /product/10.1.3.1/OracleAS_1/Apache/Apache/logs/error_log file.
    [Mon Jun  8 11:01:41 2009] [error] [client <ipaddr>] [ecid: 1244439100:<server ip>:17034:0:70,0] mod_oc4j: request to OC4J iisapp:8890 failed: AJP error: bad header
    [Mon Jun  8 11:11:36 2009] [error] [client <ipaddr>] [ecid: 1244439685:<server ip>:16312:0:2255,0] request failed: error reading the headers
    [Mon Jun  8 13:25:52 2009] [warn] [client <ipaddr>] oc4j_socket_recvfull timed out
    We have done the following changes recently
    => KeepAlive TImout changed to 5 secs from default 15
    => Changed the MaxPermSize to 512M in opmn.xml
    => Our Max Clients setting changed to 350 from default 150.
    Can someone help us by providing the possible reasons for the occurence of said errors.
    Regards,

  • Charged Ipad Mini without warning or reason it just shuts down.

    Recently been incurring an issue whereby even though Ipad Mini has plenty of charge without warning or reason it just shuts down. I can turn it back on a minute later, but it continues this cycle of randomly turning off at a time of its choosing. Help.

    Take it in for service.

  • OS X says that Compressor was modified since the code sign and won't let me launch it. Any reasoning behind this?

    Hello
    After updating Compressor to the most recent version (4.2), I get a message saying that Compressor was modified since the code sign and then won't let me launch it.
    I have tried reinstalling Compressor restarting and updating my computer.
    Any reasoning behind this problem??
    Thanks
    I am running OS X Yosemite 10.10.3 on a 2013 13inch MacBook Pro, 8GB RAM, 2.8GHz i7.

    Start the computer from the installation disk and perform Repair Disk and Repair Permissions using Disk Utility

  • Hi Apple Community. I have a iPhone 4S . The phone works perfect, besides when to swipe to unlock to home screen. It takes 1-4 swipes. Whats the reason behind it?

    Hi Apple Community. I have a iPhone 4S . The phone works perfect, besides when to swipe to unlock to home screen. It takes 1-4 swipes. Whats the reason behind it?

    Ghubash wrote:
    My iphone 4s haven't facetime?
    This is an unrelated issue... Please start your own thread.

  • F0283 VIF 1 / 2 B-42/44 down, reason: Bound Physical Interface Down

    Hi
    I have some issues after migrate from CX4 SAN to VNX SAN. Everything is moved from CX4 to VNX and I have disabled FC Uplink port that is connected to CX4. Both my FI's is only connected to VNX.
    We want SAN boot on our ESXi host, and some of them is install on a boot LUN on VNX, and some other is install local at the Blade.
    My issue is that all my host shall boot from SAN. But suddenly this fails.
    I zones the host on our MDS switches, and does everything in VNX, so the host shall see its boot LUN. SAN Boot Target is changed so it sees the VNX SAN.
    In the install I see my boot LUN, and install ESXi without any issues. Remove the installation media and reboots the server.
    When it shall boot back up, it says:
    Reboot and Select proper Boot device
    or Insert Boot Media in selected Boot device and press a key.
    And i gets 8 major error messages like this:
    VIF 1 / 2 B-42/44 down, reason: Bound  Physical Interface Down
    What is wrong. I do the same thing now, as I did when I installed the hosts that is working.

    Can you try to re-ack the Server the Profile is associated to.  The error you're seeing usually means the host Iniitator interface (VIF) is down because it has no uplink to correclty pin to.  You said you shut down the ports the CX4 was previously connected to by disabling it.  Can you re-ack the blade which should re-pinn to the new/remaining uplink.
    If that doesn't correct the problem I'd look into your boot policy.  Double and triple check the boot targets entered in the profile and make sure they match the targets on the VNX, and that each one is online and logged into the MDS ("zone flogi database").  The symptoms you're seeing used to be common with Clariion arrays as they are Active/Passive.  During the installation any available path has access to the LUN for the installation, but they rebooting required the first listed target in the boot policy to be the "owner" of the LUN.  This was easily fixed by trespassing the LUN to the other Storage Processor on the array.  With VNX I'm pretty sure they are Active/Active arrays so this shouldn't matter.
    Regards,
    Robert

  • Write behind cache, DB down, when should the system stop taking new data in

    Hello:
    We are trying to use Coherence for our custom ESB, which is brokering payloads of various size between consumer and provider applications.
    Before Coherence, stopping our DB meant organization-wide outage for critically important business services.
    Since we have at least 40G of RAM in production environment, we believe that our app
    can use Coherence write-behind option for tolerating at least several hours worth of DB outage.
    We are currently using a near cache backed by distributed cache in write-behind mode.
    9 business service JVMs (storage enabled=false) use 30 storage enabled JVMs.
    IMPORTANT: We need to create an automated alerting facility determining when
    amount of unsaved data reaches critical level since DB goes down. This alert should help us decide when our application stops accepting inbound traffic.
    It is hard to use QueueSize parameter for that because our payload memory footprint can vary from 1KB to 3MB.
    We do not expire any entries in order to enable support queries against the cache during DB outage.
    Our experiments with trying various flavors of overflow-scheme resulted in OutOfMemoryError, therefore
    we decided to implement RAM-only cache as a first step.
    <near-scheme>
    <scheme-name>message_payload_scheme</scheme-name>
    <front-scheme>
    <local-scheme>
    <scheme-ref>limited_entities_front_scheme</scheme-ref>
    <high-units>100</high-units>
    </local-scheme>
    </front-scheme>
    <back-scheme>
    <distributed-scheme>
    <backing-map-scheme>
    <read-write-backing-map-scheme>
    <internal-cache-scheme>
    <local-scheme>
    <scheme-ref>limited_bytes_scheme</scheme-ref>
    <high-units>199229440</high-units>
    </local-scheme>
    </internal-cache-scheme>
    <cachestore-scheme>
    <class-scheme>
    <class-name>com.comp.MessagePayloadStore</class-name>
    </class-scheme>
    </cachestore-scheme>
    <read-only>false</read-only>
    <write-delay-seconds>3</write-delay-seconds>
    <write-requeue-threshold>2147483646</write-requeue-threshold>
    </read-write-backing-map-scheme>
    </backing-map-scheme>
    <autostart>true</autostart>
    </distributed-scheme>
    </back-scheme>
    </near-scheme>
    <local-scheme>
    <scheme-name>limited_entities_front_scheme</scheme-name>
    <eviction-policy>LRU</eviction-policy>
    <unit-calculator>FIXED</unit-calculator>
    </local-scheme>
    <local-scheme>
    <scheme-name>limited_bytes_scheme</scheme-name>
    <eviction-policy>HYBRID</eviction-policy>
    <unit-calculator>BINARY</unit-calculator>
    </local-scheme>

    Good info ... I feel like I need to restate my original question along with a couple of new questions caused by the discussion above.
    Q1. Does Coherence evict 'dirty', or 'queued', or 'unsaved' objects for cache configuration provided above?
    The answer should be 'NO', otherwise Coherence is unsafe to use as a system of record,
    it should not just drop unsaved information on the floor.
    Q2. What happens to the front tier of the near+partitioned write behind cache described above when amount of unsaved data exceeds max cache capacity defined via high-units?
    I would expect that map.put starts throwing exceptions: cache storage is full, so it should not accept more data
    Q3. How can I determine a moment when amount of dirty data in bytes(!), not in objects, hits 85% of
    max allowed cache capasity configured in bytes (using high-units param and BINARY calculator).
    'DirtyUnits' counter can probably be built with some lower-level Coherence API. Can we use
    this API?
    Please, understand, that we purchased Coherence for reliability, for making our
    system independent from short DB outages, for keeping our business services up
    and running when DBA need some time for admin operations like rebuilding an index.
    Performance benefits are secondary and are not as obvious for our system which
    uses primary keys only and has a well-tuned co-located Oracle back-end.
    We simply cannot put Coherence to production unless we prove that Coherence
    can reliably hold the data and give us information about approaching crisis
    (the cache full of unsaved data).
    If possible, forward this message to Cameron Purdy,
    who was presenting Coherence to our team several moths ago.
    Thanks,
    Vasili Smaliak
    Applications Architect, Enterprise App Integration
    GMAC ResCap
    [email protected]

  • I can't fathom the reasoning behind ID CS5 tables. Can you help?

    I can make ID CS5 tables work, but I don't understand how they work. I should mention that I'm a heavy FrameMaker user, so I'm sure I've got some faulty preconceptions.
    In FrameMaker, I'm accustomed to using table styles to automate table formatting. All table formatting info -- e.g., text styles for table titles, headings, and body; rules; cell padding; etc -- is built into the table style and applied with a single click. The text styling information is drawn from preexisting paragraph styles that are associated with the table style. All very straightforward. But in InDesign, things seem a lot more complicated.
    InDesign has Table Styles and Cell Styles. I'm unclear on the relationship between the two. You can specify ruling and shading styles in both. I don't understand this. 
    I've gotten more predictable results with Cell Styles, so I've built most of my formatting info into them. But Cell Styles aren't stand-alone entities. Even though you have to create them, then add them to the Table Style, they have to be associated with a preexisting paragraph style. This seems like a duplication of effort -- two separate styles (cell and paragraph) applying the same text formatting info. The Cell Style does include ruling and shading info, but that shouldn't be necessary since that information theoretically can be entered in the Table Style.
    Also, using Cell Styles limits you to one paragraph style per cell. In some cases I need two -- data or text, followed by some bullet points. When this happens I've had to strip out the Cell Style and apply a paragraph style directly. Seems funky.
    I don't want to get too deep into the weeds with specific puzzles I've encountered; suffice to say I don't understand how Table Styles and Cell Styles interact and how best to use them to create and format tables efficiently. Do any of you understand the thinking behind ID tables? Can you point to a source that explains it? There's got to be a system there, a set of coherent operating principles, but I haven't been able to discern them.
    Sincere thanks,
        --Donna Reynolds

    semiwool wrote:
    I'm not clear how you're able to automate the next-format behavior in FrameMaker. Are you saying that populating a FrameMaker table by importing text from a source, using the convert-to-table option does this because the incoming content has paragraph styles that match existing FrameMaker formats, and that you can't get this in InDesign? InDesign's import options are quite rich. If you need details, search Google for "InDesign text import options" without quotes.
    My apologies. I must have done a poor job of explaining the problem, which is: If you apply a Cell Style to a cell, that cell will only permit one paragraph style. If you need to use two styles in the cell, you have to change the Cell Style to None, then do your formatting with a regular paragraph style.
    These tables were imported as RTF, which has worked reasonably well. Actually, yesterday I was thinking about the discussion we had re: Frame > ID conversions. The first draft of the tutorial I worked up is done. If interested, I'd be happy to send a copy.
    Many thanks for your assistance,
       -dr
    Try this:
    * Create a small table, say four rows by four columns.
    * Create a paragraph style named noStyle, based on No Style.
    * Create a paragraph style with text color cyan, for the second paragraph in the cel; call it cyan. Leave Next Style as Same Style.
    * Create a paragraph style with text color magenta, for the first paragraph in the cell; call it magenta. Set Next style to cyan.
    * Create a cell style whose paragraph style is magenta.
    * In a table cell, create two paragraphs that use the style noStyle.
    * Copy the two paragraphs to another cell.
    * In the first cell, apply the magenta style to the first paragraph.
    * Select both paragraphs in the cell, or select the cell.
    * In the paragraph styles panel, Right-Click the magenta style name.
    * In the context menu that appears, click Apply "magenta" then Next Style. The first paragraph remains magenta, and the second paragraph changes to cyan.
    * Select  the second cell.
    * Apply the cell style magentaCell. Both paragraphs are tagged with the magenta paragraph style.
    * Select the cell and in the Paragraph Styles panel, Right-Click the paragraph style magenta, and select Apply "magenta," then Next Style. Like the two paragraphs selected in the cell that has no cell style applied, the first paragraph remains magenta, and the second paragraph changes to cyan.
    * Copy two paragraphs tagged with noStyle and paste to all the cells in the table.
    * Select the whole table.
    * Apply the magenta paragraph style to all cells.
    * * In the paragraph styles panel, Right-Click the magenta style name.
    * In the context menu that appears, click Apply "magenta" then Next Style. The first paragraph remains magenta, and the second paragraph changes to cyan. All the cells have the first paragraph tagged magenta and the second tagged cyan.
    * Undo these last steps until all cells have reverted to containing two noStyle paragraphs.
    * Select the whole table and apply the magenta cell style.
    * In the paragraph styles panel, Right-Click the magenta style name.
    * In the context menu that appears, click Apply "magenta" then Next Style. The first paragraph remains magenta, and the second paragraph changes to cyan.
    So, with or without cell styles, the Apply Next Style feature efficiently formats multiple-style table cells.
    [EDIT] Yes, I'd like to see your tutorial. Click on my name in the sidebar to send a private message, if you don't have my email address already. Thanks for the offer.[/EDIT]
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices
    Message was edited by: peter at knowhowpro

Maybe you are looking for

  • Can only access 2 computers to wireless at a time

    Here goes: I have 4 computers, 2xp and 2 Vista.  My base is Vista.  I'm trying to run all 4 wirelessly DCHP and having a fit. I can get everything to work ie, internet and networking (all comps see all comps) except I can only access the internet wit

  • BPC 7.0 NW cubes data

    Q1>What are the BPC consolidation dependant  setting required in FICO? Q2>BPC 7.0 NW needs to collect the data from BW. The corresponding R/3 implemented is 4.7 version. If the bw data need to be supplied to BPC legal as well as management consolidai

  • Getting a "Could not find a base address that matches scheme net.tcp"

    I've written several WCF services which use HTTP (and its variants).  Now I'm trying to learn how to write a WCF service which will use TCP.  I'm using Andrew Troelsen's book, "Pro C# 2008 and the .NET 3.5 Platform" as a guide (chapter 25).  I've ask

  • Can iuse my ipod classic to transfer my music files to itunes?

    I have lost all my music files and have now only my ipod classic 7th gen with all my music and pod casts. I have searched for the best way to transfer my files to a new version of i tunes but have not found an answer, is there anyone who could help p

  • ICloud problems help please!

    I have an iPhone 6 and during the setup I must have did something wrong and now I have my old iCloud account on it that I no longer remember the password, security questions, and no longer have the email address to that account.  I think I was hacked