0IC_C03 - some key figures have unassigned Store location

Hi,
I try to implement Inventory managment scenario in BW.I follow the How to document How to handle inventory management scenarios in Bw.
Now I uploaded data to BW, the sume of key figures as general look good but I have problem with key figures,which work with value in currency, this key figures(e.g 0ISSVS_VAL, 0VALSTCKVAL) are not assigned to Store location 0STOR_LOC, values of these key figures have this characteristics Unassigned (#), unlike key figures with amount value e.g. kg etc are assigned to store location. So there is problem that is no possibility to compare material stock in currency and amount.
Do you have any experience how to solve this issue?
I work with BI 7.0 version and use standard object from BI content without modification.
Thanks
Petr
Edited by: Petr Jedlicka on Aug 12, 2011 2:30 PM
Edited by: Petr Jedlicka on Aug 12, 2011 2:31 PM

Hi,
Inventory values are captured at site/plant levels not the storage locations. These values are caputured using 2lis_03_um datasource. When you create a material, materials are created as per site. 0MAT_PLANT.
when there are movements of sales in the inventory, sales take place thru site not storage location. So sloc will not get updated in the transaction. where as when you move stock from one site to other site, there may be on storage location for all site or one sloc for one site. So for qtys you will have sloc.
Thanks
srikanth

Similar Messages

Query on 0IC_C03 with key figures 0valstckqty and 0valstckval

Hello Gurus,
I want to make a query on 0IC_C03 with key figures 0valstckqty and 0valstckval for a single month eg October 2011. I have 0plant in rows. The problem is that I just see the key figures for planst which have movements in October 2011.
I dont want choose all months in global filter to get key figures for all plants.
How can I solve this problem?
Jesper

Jesper-
You're looking at a "Transactional" info cube. That means that the query you create will ONLY provide data for a selected period in which data exists. Plants with no movements will not appear. That's how it's supposed to work.
Now... you can create a hidden selection in your columns. For example:
First column (hidden)... 0valstckqty + 0valstckval. No other restrictions
Second column (visible) 0valstckqty restricted to the date range of interest
Third column (visible) 0valstckval restricted to the date range of interest
be sure to NOT suppress Zero rows.
Plants that never had a transaction will, however, not appear at all. The query will also take a long time to execute because it's extracting all data.
The best solution is to explain to your user that it's working the way it's supposed to.. if a plant has no values then there were no transactions.

Some key figures are not being correctly reversed in the Change Log

Hi Experts,
I'm working with the BI 7 (SP 15) and I have created an ODS with Overwrite option (Record Mode equal to ' ') and a Cube receiving data from this ODS.
Whenever I have a change in one existing record in R/3 side (already previously loaded to BW), it comes perfectly to the ODS and overwrite the record in the Active Data. However, in the change log table, the before image record is not reversing all the key figures, there is one (Quant type) which is not working and it is being doubled in the cube. All the other key figures are Amount type and are working fine. PLease see below some examples of the Change Log behavior:
First time the record comes - Change log content:
Material   Valid Dt   Cost Value      Quantity Rec. Mode      Req. ID
1234     May/01   $ 100.00       10          'N'     1
Second time when the record changes the Date:
Material     Date      Cost Value      Quantity Rec. Mode      Req. 1234     May/29   $ 100.00       10          ' '     2
1234     May/01   $ -100.00       10          'X'     2
Then the final result in the cube, after it is compressed, is:
Material     Date      Cost Value      Quantity
1234     May/29   $ 100.00       20
Also, I have a Counter in the transformation to the Cube which is a constant equal to 1, it is also being aggregated erroneously. I could create a routine to check the record mode coming, but I'm not sure it is the best solution.
Can anybody help me to figure this out, please?
Thanks in advance.

Hi Rajkumar,
Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
Any other ideas?
Thanks.

Some key figure are not update for movement type 101

Dear All,
I have done load for Inventory and now i am finding that for some material the with movement type 101 the key figures are not getting populated, for these materials the values in characteristics is getting populated fine.
I have loaded the data according to stranded procedure in "How to Load...."
I have checked the values of material in R3 and it is there.
Example of the record::
Material    Plant Movement type Calender Day    quanity Base Unit
10101      01       350                     01.02.2006     20             KG
10101        01       101                     05.07.2006                      KG
10101         01      101                      10.07.2006                      KG
The Quantity is not appearing in second and third record.

Hi,
Please check whether you have set ''Rule groups'' at transfermation level . There you can set the conditions like materials having movement type X can be updated to one Key Figure and material having movement type Y can be updated to another Key figure.
Please check whether you have set this option at transfermation level.
For example, may be in your case materials from different plants are updating to different key figure.
Thanks,
Edited by: kavitha nagandla on Feb 17, 2010 7:19 AM

SIS some key figures are displaying zero value

Dear all
Following Key Figures in Standard SIS tcode like MCTE, MCTA, etc. are displaying as zero
Incoming Return
Credit Memo
Credit memos qty
Returns items
Returns Quantity
MC+6 is displaying all the key Figures as zero.
What may be the reasons
Regards
Vipin

Dear Babubala
In MC26 I am getting below warning for Incom. Returns, Gross returns, Net Returns 1, Net Returns 2, Returns items, Returns Qty
Incom. returns: Updating with date field VDATU can be set up restrictively only
Message no. M!208
Diagnosis
While updating the key figure Incom. returns the data field MCVBAP-VDATU for the period determination is used.
Updating via MCVBAP-VDATU causes a different result online as for statistic data set up. Online, MCVBAP-VDATU is filled with the current date (SY-DATLO); during set up, however, it is filled with the creation date MCVBAP-ERDAT of the item.
By using VDATU document changes you can see in the statistics that this type of 'delta updating' cannot be reproduced by a statistic data set-up. During the set-up the data is updated in different periods as in online updating, thereby causing the change history to be lost.
Procedure
Be certain that this is the type of updating you want.
In MC26 the Credit Memo Update Setting is VD Billing document and Type of Updating is A Cumulative updating
while as in Credit memo pricing procedure there is no subtotal. How to maintain it in Pricing procedure and in MC26 because in MC26 after pressing the change button the system is displaying the following message "Maintenance of SAP standard updates not allowed"
Regards
Vipin

Key Figure Display in Interactive Planning

Hello,
I am unable to display some of the key figures in SNP Interactive Planning. All these Key Figures are present in Planning book and are also included in the data view.
Is there any setting wherein I can control the display of Key figure although that key figure is present in Planning book and data view. For Example I have my "safety stock" key figure in my planning book and data view, but I am unable to see the "safety stock" key figure in SNP interactive planning.
Would really appreciate your help.
Thanks,
Sarath.

Hi Visu,
Your answer is really helpful, thanks for that. But while I am trying to hide some key figures it is not allowing me to do so. It is either hiding all the key figures or unhiding all. Please let me know if why the system is behaving like this.
Thanks

Key figure Explaination in SNP planning books 9ASNP94

Dear Experts ,
I am curious to know regarding SNP planning books key figures
when i am exploring sap standard Planning book
9ASNP94
Data view : SNP94(1)
I can able to see many KEY FIGURES Please refer below
I AM NOT SURE how they are used in planning , i mean what is clear definition of those key figures and i see some key figures are grey out and some or open for entry
how to find those detail information
when i go to T code SDP84 - define planning book
i can able to see those descrption and infocubes but not sure how to understand clearly , would be more thankful if some give me a clear explaination of it
Forecast     TXT
Sales Order     TXT
Distribution Demand (Planned)     TXT
Distribution Demand (Confirmed)     TXT
DistrDemand (TLB-Confirmed)     TXT
Dependent Demand     TXT
Total Demand     TXT
Distribution Receipt (Planned)     TXT
Distribution Receipt (Confirmed)     TXT
Distribution Receipt (TLB-Confirmed)     TXT
In Transit     TXT
Production (Planned)     TXT
Production (Confirmed)     TXT
Manufacture of Co-Products     TXT
Total Receipts     TXT
Stock on Hand     TXT
Supply Shortage     TXT
Safety Stock     TXT
Reorder Point     TXT
Target Days´ Supply     D
Target Stock Level     TXT
Days´ Supply     D
ATD Receipts     TXT
ATD Issues     TXT
Many thanks & Regards
Raj

Hi
Please find below the short summary of each key figures.
Forecast TXT :- FCST which has been released from APO DP to APO SNP
Sales Order TXT :- Sales order transferred from ECC to APO via CIF.
Distribution Demand (Planned) TXT :- Dependent demand coming from other location to this location for same product. Network planning
Distribution Demand (Confirmed) TXT :- In case deployment , we confirm the Distribution Demand (Planned) will appear her.
DistrDemand (TLB-Confirmed) TXT :- Mainly used in case of TLB.
Dependent Demand TXT :- Dependent demand coming from parent product in case of BOM
Total Demand TXT :- The sum of all above demands is called as Total Demand.
Distribution Receipt (Planned) TXT :- SNP created Purchase req will appear in this key figure.
Distribution Receipt (Confirmed) TXT :- In case of deployment Distribution Receipt (Planned) will be get confirmed in the Distribution Receipt (Confirmed) key figure.
Distribution Receipt (TLB-Confirmed) TXT :- Mainly used in case of TLB.
In Transit TXT :- In will contain the in transit stock which will transfer for ECC via CIF.
Production (Planned) TXT :- Planned order will get created via SNP in case of domestic mfg.
Production (Confirmed) TXT :- In case of SNP deployment Production (Planned) will be get confirmed in the Production (Confirmed)) key figure.
Total Receipts TXT :- Total of all the receipt elements as been used.
Stock on Hand TXT :- Stock has transferred from ECC or R3 via CIF.
Supply Shortage TXT :- This will be calculated with macro based on total demand and total receipt.
Safety Stock TXT :- Based on SNP master data, safety stock will get calculated during planning run.
Reorder Point TXT :- Based on SNP master data, Reorder Point will get calculated during planning run. . There are different methods of calculating safety stock.
Target Days´ Supply D :- The safety stock defined in number of days appears based on SNP master data in APO.
Target Stock Level TXT :- Get calculated by macro based on Target Days´ Supply D and total demand in future.
ATD Receipts TXT :- Mainly used for Deployment.
ATD Issues TXT :- Mainly used for Deployment
If you require any specific information for any key figure please do let me know.
I hope this will be useful for you.
Thanks
Amol

Key Figures in Joined Data Source

Hello,
I have created some Key Figures for the Data Source "Sales Order Item". Reports based on this Data Source are working fine and also my Key Figures are displaying the right results.
Now I want to create a Joined Data Source (Left Outer Join) with the Sales Order Item and Outbound Delivery Detail Line Items. The problem I have here is, that my own Key Figures based on Sales Order Item are not showing up in the list and I cannot select them.
Does anyone know why? Do I have to create the same Key Figures again and again as soon as I want to join the Sales Order Item Data Source with any other Data Source?
Thanks for any feedback.

Key figure are not available in joining Data Sources, Characteristics of same type from different Data Source data element available in joining scenario.
Regards
Naveen

Missing key figures from planning area after recent transports

Hi,
We are facing an issue of data not loaded to the planning area , realized this after planning book does not show any values in the current week bucket. However the required values show up in the Infocube. Our setup is as below on SCM 7
external FILE---> FILE DataSource -
>CUBE -
> /SAPAPO/RTSINPUT_CUBE program -
> Planning area ---> planning book
Recent transports included selelction variant for the above program and now we see that some Key Figures are missing from Planning area from the KEY FIG assignement tab option from the above RTSINPUT_CUBE program.
Can any one please help
Edited by: AAL123 on May 19, 2011 11:25 AM

Hi,
Did you check what all change objects have been selected in your trasport request which is causing this?
Best Regards,
Chandu.

How to calculate percentage based on key figure maximum value

Hello everybody!
I need your expertise on a query 'issue' I'm facing. Let's say I have a query getting me the Number of Open Items per Week (starting from billing document's Issue Date).
My client wants to be able to see the percentage per week and not the actual number.
So, what I have is below:
Wk"OI Nr"
1 "68.801"
2 "66.288"
3 "59.344"
4 "50.506"
5 "20.950"
And what I want is below (in italics):
Wk"OI %"
1 "100% " (i.e. 68.801 / 68.801 * 100)
2 " 96,34% " (i.e. 66.288 / 68.801 * 100)
3 " 86,25% " (i.e. 59.344 / 68.801 * 100)
4 ......
5 ......
Is it possible to achieve sth like this by altering some key figure properties or in any other way?
Thanks in advance.

First u need to create a calculated Key Fig globally. You can do this at the extreme left end of the query Designer. Just right click on the Calculated key Fig and say New Calculated Key Figure
Give the description of the Key Fig and in the formula section just put the the key fig . 'OI Nr' in you case
When u say ok it will open the properties of the key fig there u can see Enhance>> at the bottom. Click on that make the exception aggregation to maximum and refernce characteristic for the one which u are having the values 68.801, 66.288, 59.344, ..
Save this calculated key fig
now in the Columns create a new selection under the key fig.
drag the newly created calculated key fig in this new selection and say ok.
Now right click on this new selection, go to the Calculated Single Value as drop down and make it Normalize-Sub Totals
Tick the checkbox Also Apply to result
and select Calculate Along Columns.
Save the query and execute. This should solve youe issue
Hope this helps.

How to block key figure value input in DP?

Hello everyone!!
I need to create a way to block the input of value in some key figures in some planning books in DP.
I tried to create a macro to block cell input - CELL_INPUT(XXX) = 0 - , but unfortunately it doens´t work, because I have another macro (default) that keeps one cell of the entire row opened to the user insert the values.
I can not put the "closing" macro as an interactive macro in the planning book, because, only one user is able to execute the macros, not all of them. And I also can not take off the other macro from the default event or change in the design mode of the planning book.
Does anybody know´s another way to do it?
Thanks a lot!!
Regards
Angela

Hello Visu
It´s not possible to create another planning book. They will have to use the same. But I have another solution. I´ll create this macro to block the values input in the determined row to be executed only for one user. This user will be the administrator, and only he would be able to execute this macro to block the other users.
But I have one doubt, how can I set the macro to be execute only by this user using the USER( ) function? The way I did it´s locking only this user, and it has to block all the others. The function user will be used only for the administrator.
The macro is like this:
IF
    USER ( 'AAA') = 1
    Line XXX (Attributes) =
        ROW_INPUT( 0 )
ENDIF
Best Regards
Angela
Edited by: Angela Christina Martelli on Mar 26, 2009 4:49 PM

Calculated Key Figures in IP FOX

Hi,
I would like to modify the calculated key figures using custom Formula planning fuction (FOX). Can some one let me know how to change these calculated key figures from BEx.
I have found a thread discussing the same topic.
Business Planning
So do we have to definitely create a key figure in real time cube to be able to change the values in BEx calculated key figure.
this is only for simulation purpose based on some key figure values and not for storing values in the cube.
Regards
Bhav

Hi,
If I understood correctly, you are asking why we have that "planning" tab in the properties of Calc KFs also? I think its just that the properties tab for all KFs is the same (no special customizing for any kind of KF), but it obviously doesn't make sense to set planning properties for calc KFs.

Key figure security

I'm trying to secure some key figure data. What field is suppose to be used: 1kyfnm or 0tcakyfnm? The documentation says to use 0tcakyfnm, but neither object is in our system. I have tried to enter the fields directly into the authorization and rsecadmin won't let me. What am I missing?

Alex,
I've tried to make that object auth relevant, but that object is not in our system. When I go to RSD1 and enter it, I get the message 'enter valid characteristic (0tcakyfnm not avilable)'. I did searches for a different name (thinking that the name changed) but could not find an object that had a close name. I looked in OSS to see if there is a different manner to make this object auth relevant, but could not find one. Is there a different transaction or do we need to create the object? Thanks.

Cockpit report-mapping of key figures in WAD

Hi,
I'm working on a cockpit report wich consist of several different key figures combined together and shown for various months + some planning values. The key figures come from a multitude of infoproviders (and applications). So you would have a plan value, a value month -1, a value month -2 and a value current month on the X-axis and than the different kind of key figures (for instance: financial result, costs, number of employees, absence % etc.) on the Y-axis. Hereby the number of digits can differ per keyfigure, as well as the scaling factor, and some key figures require a %-sign.
On top of this there are several key figures that combine data from different providers (let's say: financial result divided by number of technical installations).
Now this can never be done in a query. Even the just the financial block would require key figures on both X- and Y-axis wich is not possible (and wouldn't make any sense in a logical way), not even mentioning the key figures that combine data from totally different applications. Now what I'm looking for is a way to map the query results to create the required report. If we'd only use the analyzer it wouldn't be a problem since I could put the queries on one tab and then use Excel functionality to map them to the fields and to be able to decide per cell how it should be formatted (with regard to number of digits for instance, wich can differ per cell). Since no navigation other than a selection on year/month is required this would do.
The only problem is that the client wishes to use web fucntionality. So now I'm looking for a way to do the same in the WAD. However I can't find a substitute in the WAD for the Excel functionality that is required to link query results to cells in the final report, nor to format each cell individually. My only solution (wich only solves the first problem) is one that constitutes of a large number of APD's that are used to get the query results into a DSO wich uses one key figure for al numerical info and some characteristics for the specification of the actual key figure that it represents.
First of all this solution is rather cumbersome and second, it doesn't solve my second problem (because the actual report consists of only one key figure for wich I can set the number of digits only for the entire column.
Big question is, is there anybody who has a more satisfying solution tho this problem. I'd think that there are a lot more companies that use reports that consist of key figures from different applications combined together in the way I described. However I could'nt find much on the inetrnet with concern to this matter.
By the way, I'm sorry for the poor lay out of this post, but no matter what I try, this forum ignores the use of the enter key and spaces.
Edited by: Jesse Brock on Sep 24, 2009 11:29 AM

Hi Priya,
Most likely, you have too many figures to display. You need to hide or add some drilldowns (or KFs in BEx) just to leave what you want to show in graph. Then select an area in Excel and use a standard Excel functionality to show graphs.
Best regards,
Eugene
Message was edited by: Eugene Khusainov

Calculating Key Figures in Copa based as sales Rev / Cusomter Price Based

Hello Gurus,
I have a requirement in which i would like to calculate some key figures in COPA as sales revenue.
I would like for e.g to calculate the following: Cusomter Price Based Discount but do not know what to take into consideration.
Is there any document which can help me to build it?
I have created the generic datasource based on the table CE1XXXXX.
Thank you

Hi Anindya,
thank you for replying.
The steps in that document was already being done.
I have all Key Figures comin from CE1xxx Table. We are using the cost based COPA.
My problem now is to build some Key Figures as sales revenue (Sales View) like for e.g Cusomter Price Based Discount.
I would like to know how to proceed to build them. Any sample?
Is it possible to build them directly based only on the generated extractor? or should i have to take dta from Billing as well?
Thank you.

0IC_C03 - some key figures have unassigned Store location

Similar Messages

Maybe you are looking for