0material inactive and error installing 0material in BCT

Hi Experts
We just had a fresh Netweaver 2004s (BI7) installation and I am having problems activating 0Material in Business Content I recieve errors like
Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding
Message no. R7B641
Attribute 0CM_CTAR from characteristic 0CM_CDT1 not (actively) available
Message no. R7322
Attribute 0CM_CDT1 from characteristic 0CM_CDT2 not (actively) available
Message no. R7322
etc
I have increased the length of 0material in OMSL, I have tried installing 0material in all the other possible installation groupings (only necessary objects, in data flow before etc.)
I have also tried the different groupings of installation (ie. data inflow before, data inflow before & after, only necessary objects etc.)
Please let me know if there is anyway you can be of help
Thank you
Eric

hi,
first install those dependent objects and do install the 0material infobject.
Ramesh

Similar Messages

  • Error Installing 0MATERIAL from Business Content

    Hi,
    I am trying to install the infoObject 0MATERIAL from the business content. After the installation without any error, when I am trying to access the object I get the error: Settings for material number conversion not found
    Could you please help me on this?
    Many thanks
    Antonino

    Hi Antonino,
    I had even worst problem: I couldn't open 0Material for maintenance. I made a search in a net and found the following:
    Load from4.5 failing because of invalid trailing char in Material
    In short I made the following:
    Executed a report RSCC_V_TMCNV.
    After that I was able to change conversion routine in 0material to ALPHA.
    That's all.
    Best regards,
    Eugene

  • Update menu bar icon and error install message

    Hi, two questions.
    The CS5 software update now puts an icon in the menu bar. Every time I mouse over it I get the spinning beach ball in Mac OSX 10.6.3. I even went into the update preferences and turned it off and it is still there. Maybe I need to restart my Mac. Still it is annoying. Any one else have this issue
    Second, After I installed CS5 I went into Applications> Adobe Folder> and there was an adobe "Help" icon when I clicked on it (not sure if I should have done that) it said this (see image):
    After that the icon became a generic icon asa seen in the error message. Any help would be appreciated.
    Paul W.

    Hi Paul 9,
    Were you able to fix this?
    I have same issue with this annoying spinning ball always running there when I mouse over. I am running on Mac OSX 10.6.4.
    I've tried to force quit the finder, no result, I've tried also an update (with illustrator update menu) and I did uncheck the "notify me of new updates..." in the Adobe application manager" and I also did uncheck the "Send reports to Adobe on success or failure of update installation" with no results.
    I'm kind of clueless with this, anyone has same issue or solution to this?
    Thanks for any help.
    Dudedesigner

  • Error during install 0MATERIAL from Business Content in BI 7.0

    Hi,
    We have a new BI 7.0 system, and I am in process of activating few InfoObjects. Many InfoObjects are activated successfully. I am facing problem with 0MATERIAL. I made multiple attempts. The error message is:
    Table Type /BI0/WMMATERIAL could not be activated
    Table Type /BI0/WPMATERIAL could not be activated
    I am at BI 7.0 SP 18 and Business Content 7.3  SP 11
    Please help.
    Thanks.
    ~S

    Hi,
    Hopes this link will help u a little
    Error in Installing 0MATERIAL.

  • Error message uploading 0material text and attributes.

    Dear all,
    i have received an error message when uploading 0material text and attributes.
    Error message is as follows:
    RSDMD 194
    Data record 512 & with the key '000000000000000081T &' is invalid in
    value '000000000000000081 &' of the attribute/characteristic 0MATERIAL
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
    any help?
    thanks

    Hi john mcquade,
    Your error message says it all!
    You have your 0material with wrong info to be loaded, check your PSA the records with error (should begin in record 512) and see what is inserted as 0material (probably you're missing some zeros before the number).
    You could compare that record with another one (less than the record 512) to see an example of a material that has the right input and this one that exists here with errors.
    Diogo.

  • TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    Click here and follow the instructions.
    (98897)

  • Why is it when I go to open a file in Photoshop cc I get a "Could not complete your request because of a program error".  I have uninstalled and re-installed software,  It works for a short time then I get that error again when i go to open a file.  Thank

    @Why is it when I go to open a file in Photoshop cc I get a "Could not complete your request because of a program error".  I have uninstalled and re-installed software,  It works for a short time then I get that error again when i go to open a file.  Thank you!

    Without proper system information and other details like what files you work with  nobody can tell you much. From corrupted prefs to issues with your PS swap file to actual problems with the fiel storage this could be anything.
    Mylenium

  • When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this

    When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!

    Hi,
    Please download the updates directly from the link below:
    WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
    MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
    Regards,
    Sheena

  • I was updating i-tunes on my windows vista but it stopped working after that.Since then i have un-installed and re-installed it a dozen times but it shows the same error (Apple error:2

    Hi
    Recently I purchased Iphone 4-s and tried to connect it to my existing i-tunes but it didnt recognise the device. So I tried updating the I-tunes to see if it made a difference but it was no good.
    Hence i followed the trouble shooting and uninstalled and re-installed i-tunes but it wont get installed properly now. Since then I have un-installed and re-installed the complete set of i-tune softwares a dozen times but it still gives me the same error- Apple Error: 2 and Windows Error :2 and report of being unable to install the Apple Application Support software. I have spent 2 1/2 hours talking to the Apple Technical Support Team regarding this but it still hasnt been resolved.( In addition, i have ensured the firewalls are disabled and also opened new user account (admin priviledges) to try and download it)
    Now not only can i use my iphone but also my ipod is out of action in regards to music and downloads.
    I would really really really appreciate anyone helping me in this matter as i am in dire straits now.
    Thank you so much in advance
    Regards

    I also have this problem. I cannot open links from a discussion board I frequent nor can I open links from my email. Also after opening my email, I cannot go to any other sites except my home page. I can then go no where else.
    When I close Firefox and try to reopen it, it does nothing! I have to bring up the Task Manager and end the Firefox process before I can get back in.
    To the best of my knowledge, this problem started with the new update to Ver. 3.6.9. I am running Windows XP Media Center 2005

  • Every time I try to open itunes I get a message saying "runtime error. An application has made an attempt to load the C runtime library incorrectly. I have already un- and re-installed it, but i get the same message as before. How do i fix this?

    every time I try to open itunes I get a message saying "runtime error. An application has made an attempt to load the C runtime library incorrectly. I have already un- and re-installed it, but i get the same message as before. How do i fix this? I don't want to lose my music and would at least want to save that.

    Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086 and note to run as admin

  • I have Creative Suite 6 Design & Web Premium installed on my HP Windows 7 laptop. All of a sudden Acrobat Pro will not open and I cannot reinstall. Get errors 2203, & Error-Install MSI payload failed with error 1603. Help.

    I have not been able to reinstall Acrobat Pro on my laptop. I have Suite 6 Design & Web Premium on my HP laptop. I have Windows 7 operating system. All of a sudden Acrobat Pro will not open so I uninstalled and tried to reinstall the program.
    The error messages I get are:
    ERROR: Error 2203.Database: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error -2147287035.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 2203.atabase: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error - 2147287035.
    ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
    Help PLEASE!

    Hi Patricia ,
    For error 2203 ,please refer to the following link.
    https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
    For error 1603 ,refer to this link.
    https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
    Let us know if this solves the issue .If required ,we"ll surely assist you further.
    Regards
    Sukrit Dhingra

  • I have tried removing and re-installing my itunes on my PC, but it just comes up with a message saying that the error: entry point not found. pleaseee help!

    My itunes was working perfectly and then i upgraded and now it doesn't open and all i get is an error message.
    Ive tried so many times removing and re-installing and it won't work.
    Someone please help me!
    I am a windows 8 user!

    The most thorough explanation of what needs to be done is in the user tip: https://discussions.apple.com/docs/DOC-6562

  • I have design standard with creative cloud, I have installed this on 2 computers, my office and home which I was told was allowed, I have just tried to open an indesign file from the office at home and and error message said that this was created with a n

    I have design standard with creative cloud, I have installed this on 2 computers, my office and home which I was told was allowed, I have just tried to open an indesign file from the office at home and and error message said that this was created with a newer version? they are the same versions and both are up to date, I was asked this morning to put in my adobe id email and password to connect to CC which I have never been asked to do before, can anyone help?

    what's your home version (click help>about) and was that just a warning so you were able to open the file?

  • Windows 7, 64 bit, iTunes 10.3. Nothing works anymore! I keep getting error 7, 14001 along with a side by side app error. I've tried wiping out all apple programs and re-installing a 100 times, nothing works. I've been messing with this 2 weeks!

    I've searched the net , and I've noticed a lot of people seem to b having this same problem. I've tried everything I can think of. I'm out of options and getting rather annoyed with apple. Please help me!  I think I've given all the info needed about my operating system. Windows 7, 64 bit, iTunes 10.3. I've erased everything re-installed it, no joy; removed again and downloaded QuickTime and iTunes separately, no good; I've removed and re-installed numerous different ways, numerous times and nothing works. All of the apple programs that are installed with iTunes have this same error.  Ive been messing with this for over 2 weeks! Any help would be appreciated, especially if it works!!!!

    I've searched the net , and I've noticed a lot of people seem to b having this same problem. I've tried everything I can think of. I'm out of options and getting rather annoyed with apple. Please help me!  I think I've given all the info needed about my operating system. Windows 7, 64 bit, iTunes 10.3. I've erased everything re-installed it, no joy; removed again and downloaded QuickTime and iTunes separately, no good; I've removed and re-installed numerous different ways, numerous times and nothing works. All of the apple programs that are installed with iTunes have this same error.  Ive been messing with this for over 2 weeks! Any help would be appreciated, especially if it works!!!!

  • Steve Jobs obviously was "the man" because every update or install now gives me problems... i can no longer download anything to my iphone.. giving me errors of "cannot install at this time" and i get an error installing itunes on my other laptop... wth?!

    Steve Jobs obviously was "the man" because every update or install now gives me problems... i can no longer download anything to my iphone.. giving me errors of "cannot install at this time" and i get an error installing itunes on my other laptop... wth is going on!??!
    ok so the download problem with my iphone.. what could be the cause of that? ive restarted and deleted the "undownloaded app" over 10 times already. and restarted the iphone 10 times... next thing i know i cant install itunes on my laptop.... geez man..
    obviously there is a fix which someone will help... but why should i have to go through all that crap to install a so called uncomplicated software... when you think about it this really shouldnt even be an issue.
    normally if the thing dosent work. normally with most programs you just uninstall the uncompleted software and just reinstall and everything is usually good to go.. help!

    ive never had any problems with ap[ple products in the past... this is a first and a stupid problem if you ask me

Maybe you are looking for

  • Problem with breakpoints in Web Dynpro components

    Hello experts, I have problems with breakpoints in methods of Web Dynpro components. Sometimes everything works as expected and a new window with the debugger comes up. Sometimes the breakpoints are ignored, and debugging is impossible. It even happe

  • How to change the source type for a primary key on a form?

    Hi, At the time of creating a form, I had set the source type for the primary key to an existing sequence. Now I want to change the source to a trigger. Can anyone suggest how to do it? Thanks in advance, Annie

  • Keyboard and trackpad unresponsive intermittently

    The keyboard and mouse on my MacBook air (Second gen) suddeny stopped became unresponsive in any program other than the boot selection screen (that appears when holding 'option' on boot up). I rebooted tha machine several times under different operat

  • I need some advanced help regarding AE and PPRO workflow

    Hi all. I have a problem and require a solution. I am creating a video that has cellphone/IM chat graphics, animated in After Effects. The problem is the layering. In PPRO, the layers are as follows on the timeline. Top layer: Chat Graphics Middle La

  • RSDDK_STA_DEL_DATA - Reorganization check box ticked -job is taking longtim

    Hello, In our BI Landscape, the table RSDDSTATAGGRDEF become very large. we are currently managing to delete the older records from the table. we have found a program RSDDK_STA_DEL_DATA for deleting the entry. We have ticked the re-organization optio