0MATERIAL(Info Object) Activation Error from BI Content.

Hello Experts,
0Material activation failed..... for below reasons...
When I am trying to activate 0material from BI Content it is showing errors -
1. Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding.
2. Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding
3. Attribute 0CM_CTAR from characteristic 0CM_CDT1 not (actively) available
4Attribute 0CM_SHAR from characteristic 0CM_CDT1 not (actively) available
It is having error messages like point 3 & 4 up to 0CM_CDT7.....
5. Attribute 0CM_CDT1 from characteristic 0RT_SEAROLL not (actively) available
6. Attribute 0RT_SEAROLL from characteristic 0MATERIAL not (actively) available
7. Hierarchy characteristic 0CM_CDT1 of characteristic 0MATERIAL is not active
8. Hierarchy characteristic 0CM_CDT2 of characteristic 0MATERIAL is not active
9. Hierarchy characteristic 0CM_CDT3 of characteristic 0MATERIAL is not active
Please suggest me the solution of this error.
Thanks
Kshitij D.

Hi Ashish,
Thanks for quick reply
0UNIT_DIM & 0AREA_UNIT is active in BI System.
But when I am trying to activate the 0CM_CTAR & 0CM_SHAR then is showing following error.
Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding
Activation was terminated
Please suggest for the same.
Thank you
Kshitij D.

Similar Messages

Steps for creating 0MATERIAL info-object

Hi,
Guys I need help for the below mentioned activities, I need detailed step by step guidance.
Create a copy of 0MATERIAL info-object (and name it as ZZY_MAT) with a minimum of 10 attributes (few navigational and few display).
Create a transformation and DTP (for source system PC_FILE) and do a data load for atleast 100 material numbers.
Thanks and regards,
Jagadeesh v
<Moderator Message: Please read the [help|http://help.sap.com]>
Edited by: Siegfried Szameitat on Aug 25, 2010 11:26 AM

Hi,
try 0LO-IO.
regards
Siggi

Info object installation error

Dear Experts,
i am having error while upgradation
2EER7000 "InfoObject 0APO_HOUNIT is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_HUNIT is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_IUNIT is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_LADGR is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_LGKND is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_LGRAD is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_LINENO is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_LOCNOF is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_LOCTYF is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_LPPRIO is not" "consistent - activate it" " " " "
2EER7000 "InfoObject 0APO_LPROD is not" "consistent - activate it" " " " "
when i luking for IO 0APO_LGKND, 0APO_LOCTYF its thr in active mode but in upgradation its giving error.
please tell how to install
InfoObject 0APO_HOUNIT
InfoObject 0APO_HUNIT
InfoObject 0APO_IUNIT
m trying to install from BI content but its not coming in info object tab.
Please help
Ankit

Hi Ankit,
For these infoobjects, in Tocde RSD1, do the version comparison between active and content version.
It might reveal what is the inconsistency.
Thanks,
Krishnan

Regarding Info Object Activation

Hi Friends,
I am activating the info object 0cm_ctar.
while activating it is giving the below error.
Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
Message no. R7B641
Diagnosis;
If the characteristic is used in an InfoProvider with dimensions (for example, an InfoCube or MultiProvider), the compounded unit is not unique if currency key figures are used at the same time.
System Response
This type of modeling is not supported.
Procedure
Replace the currency with a different characteristic. If you nevertheless want to use a unit in the compounding, you should use the modeling of a characteristic that semantically represents a unit. To do so, copy the technical properties of the unit of measure or the currency.
could you please guide me wht should i do now?
Regards,
ramnaresh.

Hi,
Remove the infoobject 0UNIT_DIM from the compounding tab and activate. Or define another infoobject similar to 0UNIT_DIM and replace the 0UNIT_DIM in the compounding tab.
Regards,
Dinesh D

Info object activation

Hi Team,
I Had deleted one of the navigational attributes in Master data object.After that when i want to activate the object it is giving conversion error.
PLS let me know how can i achieve this.Is there any solution.
suggestions appreciated

Hi Raju,
Thanks for your help.
I noticed that this navigation attribute are available in the cubes.
However, they are not active, and I do not know how to "remove" these from the cubes.
Could you please elaborate how to remove this navigation attributes from the cubes?
If I understand it correctly, the reason why we could not activate the info objects is because if a navigation attribute has been added to a certain info object and activated, then we can no longer remove this navigation attribute as SID has been created for this relationship.
The only way to remove this relationship is to remove this relationship in all places/cubes where this info object is used. But if this possible at all since the SID has been created, and I do not know whether we can delete this SID?
Many thanks in advance.
Fen

ID & IR Object activation error.

Hi All,
In our XI development server the objects(IR & ID) are not getting activated.
ResourceException in method ConnectionFactoryImpl.getConnection():
com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException
thrown by the physical connection: com.sap.sql.log.OpenSQLException:
Error while accessing secure store:
File "\\hostname\sapmnt\XID\SYS\global\security\data\SecStore.properties"
does not exist although it should..
I searched in forum and there is no good threads.
Can anyone figure out what went wrong and how to reslove this ?
Thanks
Sunil.

Hi,
ask your basis guys to check the J2EE log to see what error is occuring..........
ask your basis guys to restart your XI server completely.....then again ask your basis guys to check the startup log to see if there is any error in it................if there is no error in it, then again try to activate your IR and ID objects..........
Regards,
Rajeev Gupta

Problem when activating Query from Business Content

Hi Gurus,
I'm currently encountering problems when activating a query (Financial Statement and P&L: Actual/Actual Comparison) in the business content under these 2 cubes (0FIGL_VC1 and 0FIGL_VC2). Since I was told that these cubes are Virtual Cubes I also have already activated Basis Cubes (0FIGL_C01 and 0FIGL_C02) as a prerequisite of the 2 Virtual Cubes. I have also loaded the data for the 2 cubes and have encountered no problem at all.
But while activating the said Query (Financial Statement and P&L: Actual/Actual Comparison). I have encountered a problem during activation and only this error message appears 1. Error when activating element DO9NE34DKNREWIBWNVAW8BS7M (Technical Name of the Query) and 2. BEx transport request '' is not available or not suitable.
What other possible steps am I missing here?Is there anything else I should do or activate before activating the Query. Thank you again for all the help.
- Kit

Hi Kristian,
Do the following ->
Goto transaction RSA1 -> Transport Connection -> Edit -> Transport -> Switch On Standard.
After this try activating your Query again.
Hope this helps!
Regards,
Saurabh

Help, I continue to get a 'object expected' error from DW CS3 SWF video insert?

I am trying to use DW CS3 to place video into my website. Seems simple enough, 'insert media', 'flash video', etc. However, I have been unable to get it to play or even show up. The source file is an FLV file in the same directory as the index pages that should be showing it. Here is the link, http://www.fishart.us the error line begins with 'AC_FL_Runcontent'.

any one with ideas???
i've been doing some more research... and found a possible solution... where i could send the video thru a server proxy... but the only thing is doing that might slow down my process... i was wondering if there was any other solution to this problem??

New created info object activation as background

i have created new infoobject. can i activate background.
please let me know.

Hi,
Goto RSD1... given ur infoobject.. activate...........
regards,
raj

Error in transpoting info object

Hello,
Need help to solve this please!
I am getting an error while tranporting an info object!
Error 1 with function module RSDRX_FILL_INITIAL_PQTABLE (Fill Master Data)
Message no. R7195
Diagnosis
Possible causes:
Function module DB_CREATE_TABLE
There is not enough room in the table space.
Procedure
In this case, check the logs on the database and extend the table space if it is too small.
Help me please!
Regards
RAm

Hello,
Help me to solve this !
I cant transport the info object !
It says:
Function module DB_CREATE_TABLE
There is not enough room in the table space.
Procedure
In this case, check the logs on the database and extend the table space if it is too small.
Help me!!
Regards
Ram

Assigning CL Info objects to 0MATERIAL

Dear Gurus,
                  I have created CL Datasources(class type 200,001,022)
classtype     basis datasource              Info object
200              0MATERIAL_ATTR            1cl_0mat200(with 36 attribute fields)
001              0MATERIAL_ATTR            1cl_0mat001 (with 69 attribute fields)
022              0PROD_ATTR                   1cl_0prod (with 9attributes)
Now can i know my following assumptions are right----
1). Make them ATTRIBUTES as Navigational Attributes in their respective Info objects..
2).Assign resp.CL Datasources to resp.CL Info sources generated...
3)Develop the ODS and Infocubes with these CL Info objects...
or
1).Should I add the above Info objects(1cl_0mat200 and 1cl_0mat001) as Attributes to 0MATERIAL Info object???
Guys i checked as much threads as i can related to this topic,but could'nt find any specific info...would really appreciate ur help here,guys.
manythanks
arun
(would assign points for sure)

Hi
Have u used the CTBW transaction for datasrc creations for classification data for materials? The CTBW_Meta trasaction will take care of the necessary attribute objects to be created.
check these links which should help you:
Extracting classification data in BW
Loading material classification
Loading material classification
MM - Extracting Material Classification
Re: Material Classification - how to extract?
Re: How to add Key Fields & Chars. for Mat. Classificattion DS 1CL_OMAT001 ??
hope it helps...

Issue with Info Object Transport after changing Data Type

Hi Experts,
We have a DSO which is running past 5 years. And recently(3 days back) we added new fields into that DSO. Delta loaded for last three days and new info object (Say XXX) data populated into DSO.
Now the problem is, We identified that, info object data type is not correct. We used data type NUMC instead of CHAR.So Character information is missing for that field.
Example:
Data from ECC: ABC123
Data Loaded to DSO: 123 (Missed character ABC)
So we deleted data from DSO and changed the info object data type in Development system.
And also I have deleted only last three days delta records from DSO and transported my info object to Production. But its giving error as: Info object contains data in DSO".
But that info object field is empty in DSO. I have already deleted last three days delta.
Do I need to Delete all 5 years data from DSO to change the data type of recently added new info object ?
Please give me your solutions and ideas to solve this issue.
Thank you,
Best Regards,
Santhosh

Hi Raman,
Thank you for your answer.
When I changed the data type of info object in Dev, I deleted the content of DSO. And same thing transported to QA as well. Before importing changed info object, I just deleted the content of DSO from QA. So transport done successfully QA.
But in Production we have a history of past 5 years. So I cant delete all contents of DSO.
So just deleted only the delta request's which contains data for that info object(3 days back, we moved that info object(NUMC data type) to production,So last 3 days delta only loaded for that info object). And tried to transport it. But it was failed. I am sure we need to drop all data from DSO, if I am interested to go with same info object.
I have some comments on your first approach,
1. If we delete info objects from Dev DSO and transport to Production will give transport failure, Why because, my previous transports errors clearly saying that info object contains data in DSO . So it wont allow to remove that info object from DSO.
2.We are using same info object technical name in BO Data federator also. So if we change add new info objects again we need to make changes with BO as well. I am thinking this point as my last option if i cant find any other solution.
Thank you.
Best Regards.

Inactive info Object

I get the following errors when i try to activate an info object ( 0CO_AREA ) which is inactive under my info object tree and within the Business Content.
*+Error deleting document property /BI0/0CO_AREA*+
*Error when deleting document property*
*Error when activating Info Object 0CO_AREA*
*Error when generating master data routines*
**Error when resetting Info Object 0CO_AREA to the active version* "*

Hi
Follow the steps
1. In the infobject menu delete the 0CO_AREA
2.Catch up the infobject 0CO_AREA in Business Content screen and say Install.
3.In AWB-->Modelling, search your infobject 0CO_AREA..and this time it shoul be active..
assign points if it helps..

How to install cubes and queries from Business content in BI 7

Hi all,
Could you please help regarding how to install Info Cubes and Querries from Business content in BI 7.0
And pl send some OSS notes on BW Statistics in BI 7.0
Thanks in advance

And also you can go thru the following link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
Regards,
Gattu

Javascript error from DW Template

I got the javascript code below from a css template in
Dreamweaver. It's the code to control which submenu links are
displaying in a horizontal menu bar. I'm getting at Object Required
error from the line in bold.
//menu constructor
function menu(allitems,thisitem,startstate){
callname= "gl"+thisitem;
divname="subglobal"+thisitem;
this.numberofmenuitems = allitems;
this.caller = document.getElementById(callname);
this.thediv = document.getElementById(divname);
this.thediv.style.visibility = startstate;

First thing - there is no *bold* for those who are reading
your post from
the NNTP side. Please don't use text formatting options (or
really, ANY of
the options) from the webforum as they usually fail for the
NNTP readers.
Since most of the answers come from the NNTP group, it's not
a good idea to
confuse them! 8)
Second thing - it looks to me like you are using the HALO
menus on this
page. Those menus were removed from later releases of DW
simply because
they were awkward, goofy, and not best practice. Would there
be a chance
for you to replace them with something a bit more
"contemporary" and less
"quirky"?
Finally, it is not really possible to diagnose your problem
from this
snippet of code - can you post a link to a page that displays
the error
message?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"natg504" <[email protected]> wrote in
message
news:ftfoof$l6n$[email protected]..
>I got the javascript code below from a css template in
Dreamweaver. It's
>the
> code to control which submenu links are displaying in a
horizontal menu
> bar.
> I'm getting at Object Required error from the line in
bold.
>
> //menu constructor
> function menu(allitems,thisitem,startstate){
> callname= "gl"+thisitem;
> divname="subglobal"+thisitem;
> this.numberofmenuitems = allitems;
> this.caller = document.getElementById(callname);
> this.thediv = document.getElementById(divname);
>
this.thediv.style.visibility = startstate;
> }
>
>

0MATERIAL(Info Object) Activation Error from BI Content.

Similar Messages

Maybe you are looking for