0Material is blocked by conversion when transporting from Dev to quality Bo

Hi All,
I am transporting omaterial , I had selected with data flow before option while creating the transport request , when importing the request i am getting the following error in the quality box" 0Material is blocked by conversion "i had already transported the table view ( t ocde osml)
Please guide me to resolve this issue .
thanks in Advance
suitable answer will be awarded

Hi Krishna,
   Goto SE14, Give all the relevant tables one by one and Delete data and acivate.
1. SE14
2. Eneter table like /BI0/PMATERAL
3. On the next screen select the option Delete Data and Activate.
4. Repeat step 1 to 3 for all the other tables.
To find out all the tables:
1. Goto Se14
2. /B10/*Materal
3. press F4.
Hope this helps.
best regards,
Kazmi

Similar Messages

  • Problems when transporting from DEV to PROD

    Hi experts, I have problem during transport from DEV to Production.
    We have a  DEV, QAS and PRODUCTION and we have transport from DEV to QAS very well. But when we transport from DEV to PROD, recibe an error  like:
    After beginning the import method RS_IOBC_AFTER_IMPORT for Objects types IOBC mode (activation)
      Failed to verify catalog InfoObjetos ZCM_UNIMET_CHA01
      The InfoObjeto ZCM_RENC version does not exist in active
      The InfoObjeto ZCM_RENM version does not exist in active
    1.The Query is: Wy if the transport go OK from DE to QAS, then The transport from DEV to PROD terminated in error?.
    2. There are any items to check in production before to transport?.
    PD: All of the Objects in DEV are in ACTIVE status
    Tanks,
    Ramon Sulvaran

    The transport ended in QAS with error code (4) and ended in Producion with error code (8), the detal of the error in Production begin with:
    Home After import RS_ODSO_AFTER_IMPORT method for type (s) ODSO object (trigger mode)
    Activation of DataStore objects of type Object
    Check DataStore objects of type Object
    DataStore Object Verification ZCM_DS01
    The DataStore object is consistent ZCM_DS01
    Burning the DataStore objects of type Object
    Internal activation (DataStore Object)
    Pretreatment / Creating DDIC objects to DataStore Object ZCM_DS01
    Table / View / BIC/AZCM_DS0100 (type 0) DataStore object recorded ZCM_DS01
    Create / Delete the indexes for the active table
    Table / View / BIC/AZCM_DS0140 (type 4) recorded ZCM_DS01 DataStore object
    Type of table / BIC/WAZCM_DS0100 recorded
    Table / View / BIC/VZCM_DS012 (type VIEW) recorded ZCM_DS01 DataStore object
    Log ZCM_DS01 DataStore object changes was recorded successfully
    Writing Object Catalog entries (Tadiran)
    He has written the object TABL / BIC/AZCM_DS0100 in catálgo objects (Tadiran)
    He has written the object TABL / BIC/AZCM_DS0140 in catálgo objects (Tadiran)
    He has written the object TABL / BIC/VZCM_DS012 in catálgo objects (Tadiran)
    He has written the object TTYP / BIC/WAZCM_DS0100 in catálgo objects (Tadiran)
    Activate all ABAP Dictionary objects (5):
    Error / Warning in progr.activación Dict., Detailed log> Detail
    Activate table / BIC/AZCM_DS0100.
    Lack of expansion to the category table
    Lack of extension category for include or subtype .......
    When i go to BW Production to check teh object. I see tha the Object was create but in inactive status (grey color). When y Try to Actiavate it y see the error:  Error/ Warning in program Activation Dcit. Detailed Log -> Detail

  • Handle metadata of configuration objects when transported from DEV to QA?

    All,
    I was reading this blog /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
    <i>"Unlike IR when we import the scenarios in ID the configuration metadata will be lost and have to be manually entered in the QA ID. For Ex: Parameters like source directory, filename scheme, FTP server will vanish and have to be entered appropriately as required for QA sand box. After entering the metadata we need to activate all the scenario objects in the ID. After successful activation your interfaces are ready for testing."</i>
    From the above I understand there are somethings(like adapter metadata..) that has to be entered manually when the objects are transported from dev to QA.
    So my question is, for what all objects of ID needs metadata to be entered  manually in QA.
    Party?
    Business systems(business systems, bus servcies, integration process)?
    Communication channels?
    Receiver determination?
    Interface Determination?
    Sender Agreement?
    Receiver Agreement?
    I appreciate your reply
    Thanks
    KK

    Hi,
    first of all it's not adapter's metadata
    (adapter's metadata is something completely different)
    the "thing" that will dissapear is the adapters'
    configuration (configuration of your communication channels) - that's all
    RFC destination (idoc adapter) ftp server (file adapter) etc.
    basically all you need to do
    is to fill it one every system (QAT, PRD etc.)
    Regards,
    michal

  • Aggregation level transportation from dev to quality

    Hi,
    I have 2 aggregation levels in my mutiprovider. How can I transport these 2 aggregation levels from dev to Quality systems?

    Hi,
    you can collect the aggregation levels in transport connection (transaction rsa1 --> transport connection). There is a folder "Planning" and a type "Aggregation Level" (technical name: ALVL). Just select your aggregation levels and add them to a request. Please be aware that depending objects such as the multiprovider have to be transported to your quality system at same time if they are not already existing over there.
    Brgds,
    Marcel

  • Problem with sap script while transporting from dev to quality server

    Hi experts,
    In dev server i am getting correct output in sap script.But when it is transporting to quality server alignment is different.Printer name is same both in dev and quality.Please give an answer for this query.
    Thanks
    suresh

    Hi Suresh,
    This could be a problem with the Sapscript buffers. Try running the report RSTXDELL on the system to clear the Sapscript buffers?
    To do this you can use RSTXDELL report with default settings except it is better to have * instead of the current client number in the Client field.
    After this, create a new spool and see if the problem is resolved?
    Regards,
    Aidan

  • Xcelsius based on BEx query. Issue when transporting from DEV to PRD

    Hi all,
    I am facing an issue as described below:
    I created dashboard based on bex query in Query Browser. Everything is working find in DEV. Then I transport the dashboards to PRD, I also use the override settings to point from BOD-BWD to BOP-BWP, my connection changed accordingly. Everything seems ok. One day when we stop the BOD system. Dashboards in BOP are not working. Then I start BOD, everything is ok then.
    The issue I got:
    Internal: BOP....
    External: BOD.../XcelsiusWebServices.
    Is there any chance that dashboard in BOP using the BOD xcelsius web service?
    I have resolved this issue by:
    - Open the dashboard in BOP, then in each of the query in Query Browser, I clicked edit and click next, next until end.
    - Then re-save to BOP, then it is working
    For your information, I used BEx query in Query Browser only, not use BIWS.
    Dashboard 4.0 SP04
    BW 7.3
    Does anyone face this issue before? And how you resolved it? Please kindly share with me.
    Thanks,
    Quan Vo.

    Hi Quan,
    Found few points regarding this.Please check might help you.
    Migration of Dashboards (using Query Panel) on BI 4.0 environment - Business Intelligence (BusinessObjects) - SCN Wiki
    Regards,
    Javed

  • Updates rules are not active when transported from developmet to quality

    Dear friends,
    I had made some in changes in strat routine in update rules BW development  and saved in request and transported to qaultiy
    se09-child request -parent request -
    In bw testing  I have activated the update rules  and saved in different request but I now updates rules not acitve .
    Please suggest me where ihave gone wrong ..
    Regards
    shekar reddy

    Hi Sriram,
    Download the below documents for reference related to Transports
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50b1d20e-c1e8-2c10-d9b9-d48eb3a83d89
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/205caa59-a948-2e10-b397-9ccafd3d4f5b
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2050db8b-9d90-2c10-2980-b13a4b0938f6
    Regards,
    Venkatesh

  • Characteristic 0MATERIAL is blocked by conversion

    Hi experts,
    I am transporting the 0MATERIAL changes into production (after extra navigational attribute added), while importing into production system, its giving below error message.
    Characteristic 0MATERIAL is blocked by conversion
    the new navigational attribute is active in production system.
    how to resolve this issue?
    regards
    venuscm

    Hi,
    Kindly review this SAP Note 1177708 - CHECK: Change time-dependent attribute to time-independent
    For existing data, a time-dependent attribute can only be changed to time-independent if there is exactly one attribute value for each characteristic value in the existing data. Even though there are several attribute values, the check may in some cases report values to be unique. However, the characteristic activation terminates. The subsequent inconsistent state can be cleared only manually.
    Please also read & follow the recommendations in SAP Notes:
       325296   Conversion lock: Characteristics cannot be edited
       451773   Inactive characteristic cannot be activated (inact.
    Rgds,
    Colum

  • Transporting from DEV server to Production Server

    Dear Experts,
    Like in ABAP and other SAP modules we are having Transport Requests to transport from Dev server to Production server In XI how can we transport all the configuration done by me from Dev server to Production server.

    Hi,
    In XI we can transport in two ways :
    1) File Transport
    2) Using CMS which needs configuration to be done
    Using the File Transport you can easily the Export the Objects and Import the Objects in the Target system.
    Select the Object in the Design or Configuration ->right Click you will find Export option.
    When you select the It creates the .tpz file which can be imported in the Target System
    Using file transfer or CMS we transport xi objects.
    Transporting XI from DEV to QA
    Look into this blog for how to export / improt IR and ID objects,
    XI Software Logistics II: Overview
    XI Software Logistics 1: SLD Preparation
    Transporting IR,ID Objects using File System
    http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
    Regards
    Ganga

  • Transports from Dev System to Quality System, Objects copied in Local reque

    Hi All,
    I am doing transports from Dev Box to Quality Box, while collecting the objects , some required objects got collected in a local request(9xxxxxx) and some got collected in Work bench request(9yyyyyy), Now I want to add , the objects collected in the local request to the work bench request to have  a single work bench request i.e 9yyyyyy for transport , with  all the objects of the local request 9xxxxxx and already collected objects in work bench request 9yyyyyy,
    Please provide the solution for the situation
    Thanks in advance
    suitable answers will be awarded
    Prasad

    Hi,
    1.First see that your workbench request has a different target system than the ones pointed to by the development class/package of the objects you are trying to assign.
    or,
    The objects are not assigned to correct development class/package.
    2. When we try to create a workbench request, we will see only the request and that is fine.
    3.Now, release the local request containing your objects.
    4.Include the local transport objects to the new workbench request (Ctrl + F11).
    and  release and transport the workbench request.
    Pls assaign the points if it is useful.
    Regards,
    Raghavendra Rao.Kolli.

  • Can not transport from DEV to PRD (Hang up)

    Hi Experts,
    Please help.. I have this problem, was not able to transport from Dev to Prod, it just hang up.. I've read a lot in web how to solve this problem and did the following:
       ==> Stop all TP running in OS level
       ==> Delete all pending job in Import Monitor (with truck logo)
       ==> and the last to be done is to delete the data from table TRBAT, but it took so long to delete the data in that table.. What I've noticed is that the data left in table TRBAT is the transport number wherein user was log-off during transport execution (as in the middle of the process)..
    What should be the solution of this problem, as we can not proceed with the transport of our changes made in DEV system, as it just hang up in there.. and I'm also having this problem in deleteing data from TRBAT table.
    Thanks.
    Edited by: Deo Pasion on Feb 20, 2010 7:25 AM

    Hi,
    Its well known problem which is discussed many times in many threads.
    Did you check TP System Log and TMS Alert of the System ?
    Execute RSTPTEST report to check the STMS configuration. Also check the existence/status of RDDIMPDP Background Job.
    Please refer these useful threads with similar symptoms.
    [Transport (STMS) issue + Hang|Transport (STMS) issue + Hang]
    [regarding STMS_IMPORT Transport Hang.|regarding STMS_IMPORT Transport Hang.]
    Also check this SAP  Note 71353 - Transports hang during background steps.
    Regards
    Bhavik G. Shroff

  • Transporting from DEV to QA

    We have 3 different sld's for DEV,QA,and PRD systems.
    i need to transport my XI objects from DEV to QA.i'm working on standard XI contents.
    i need answers for my following questions.
    1.if i use full export for transporting SLD from DEV to QA,can i use the same tecnical systems and business systems in QA?
      Can T.S and B.S also get transported from DEV to QA?
    2.In such case how to define business systems groups and transport targets?
    pls don't send any blogs..i've all the blogs
    thanks
    Abhijit

    Hi,
    1.if i use full export for transporting SLD from DEV to QA,can i use the same tecnical systems and business systems in QA?
    Can T.S and B.S also get transported from DEV to QA?
    You can use same technical systems and Business systems.
    1. Go to Dev SLD and Export all your SWCV, Products, Technical and Business Systems. This is nothing but saving of the SLD objects as a CIM file on your local machine. You would also need to export the Technical And Business System poitning to your XI integration server .
    2. Go to the QA SLD and then import these objects exported in Step 1 in QA SLD
    3. Now, create the QA Tech and Business Systems in the QA SLD
    4. Go to the Dev Business systems imported on the QS SLD and you will have an option Transport Targets. In this map the Source Business System to the Target Business Systems.
    Make sure that all Dev Business Systems have the correspodning Transport Targets for the QA Business SYstems
    5. Now if you import the ID objects in QA , the business systems name will be renamed automatically.
    2.In such case how to define business systems groups and transport targets?
    You need to create Transport Groups on your QA SLD. One for Dev and One for QA. You can create Transport Groups only for Integration Server Business Systems.
    And this is why you would need to export the Dev XI technical System and Business System from the SLD of Dev and Import it into the QA SLD.
    2. Create the transport groups and then assign all Dev Business Systems to Dev Group, all QA Business Systems to QA group and then create the transport targets.
    You use the Option related Integration server in the Business Systems to assign a Business System to a Group.
    Refer
    Problem regarding xi transport
    Thanks
    Swarup
    Edited by: Swarup Sawant on Feb 26, 2008 11:55 AM

  • Hierarchy transport from developement to Quality?

    Dear SDN,
    Hierarchy transport from developement to Quality.
    I have created one balance sheet Hierarchy on 0Account infoobject.
    Could you please tell me how to transport hierarchy from development to Quality.
    Waiting for response.
    Thanks & Regards,
    Kiran

    Hi Kiran,
    Kiran Hierarchy data can be loade from source system, flat file or manually maintained in system.
    since you have done manulally you can do the same in other  systems also, but you need authrizations to maintain manually
    I have manually created my balance sheet hierarchy using RSH1 transaction code.
    you have do the same in quality also, since all required infoobjects are available in quality system, manulally create balance sheet hierarchy using RSH1 transaction code in Quality system.
    check whether you have authorization to manually create in Quality system. you have to do the same procedure in production also i guess.
    Regards
    Daya Sagar

  • STMS ,  logs? for transports from DEV 200 to QAS 200, 201 & 202

    We are transport from DEV client 200 to QAS client 200, 201 and 202 using stms and specifying which client we want the transport to go to.
    After the transports, how can the development team find the logs for these transports.
    Right now, we as basis can see the results after each of the transports to each client.  IF there is an error then we stop and ask the dev. team to review the logs.  However IF the transports go thru without error, HOW can we go back over time to confirm that there were in fact NO errors for transport to each client?
    Thanks
    Maria

    Hello Maria
    After you import the transport,in the STMS menu only you can see the option for checking import logs
    just click on that and you will be able to see the import logs of a transport.If you drill the logs,you can see everything what the transports has done,what objects have been moved,also if there are any warnings or errors
    Rohit

  • Transporting a routine from dev to Quality

    Hi Frnds,
    I have transported a transformation from Dev to Quality. After that i got a requirement, so that i have written routine for a infoobject in Dev. Now i want to transport only that routine to quality.
    Here in transport connection i am not able to find out the routine bcoz this transformation having more than 20  routines.Here in transport connection routines are with technical names.
    How can I find out my routine technical name?
    Or Is there any other way that i can transport this routine only into quality?
    Regards,
    Sridhar

    Hi Sridhar,
    Surely you can collect everything and transport it will not impact anything existing. Only if you have made some changes to the transformations in development that are not in quality, will be moved to quality.
    Simple way to collect small objects is go to the change mode of the transformation it will ask you for transport request. Give the request number and it is ready for import in quality.
    Hope this helps.
    Regards,
    Viren

Maybe you are looking for