0meantoday

Dear All,
While Im loading data to 0SD_C15 cube,im getting the following error.
Cannot get a valid target currency - currency translation 0MEANTODAY     BRAIN     381     
Plz help me in this regards,it's urgent issue.
Regards,
Yunus

hi
have resolve your problem?
best regard
francoise dinatale

Similar Messages

  • Target Currency 0MEANTODAY does not exist

    Dear Experts,
    I got this error while execting a report.
    Error Msg: Target Currency 0MEANTODAY does not exist.
    Kindly suggest.
    Regards,
    KV

    Hi,
    If your query uses currency translation, first turn it OFF and run the query. I hope it will run fine.
    If yes, then you have to update your curreny exchange rate list from source systems or currency translation rule in RSCURR or check currency values available in your info provider.

  • Currency conversion Error in 0sd_c15

    Hello Experts,
       I am having a problem in the ETl of the cube 0SD_C15 .Its showing Currency conversion error
    0MEANTODAY while loading data.Please help me in this regard
    Prasad

    Hi
    You will find the transfer global settings for the source system where you are extracting the data.
    Select the source sytem, right click,go to transfer gloabal settings, (select the currencies in this)
    Then Reload the data into the cube,
    After, Reloading the data into the cube replicate the master data, and activate the mappings,and load the data.
    I think, this will work....
    Regards
    Sudheer

  • Currency conversion variable

    I have a question regarding currency conversion variable.
    We have USD and CAD currencies in BW. I created a currency conversion variable in the properties of a key figure using average rate for current date (0MEANTODAY) and that variable was working fine for a long time. Now I noticed that variable got corrupted in BWD but still works in BWQ and BWP systems. I can see in BWD that variable has nothing in a Variable Represent box and Ready for Input checkbox is not checked. It doesn’t let me to fix or repair this variable. I cannot run any existing queries in BWD that use this variable. The error message is “Variable 0MEANTODAY is not permitted for the target currency”
    I created another currency conversion variable that works in BWD. I know it is ok to have multiple variables for a dimension, let’s say Cal Year/Month has a number of variables. I am not sure whether it is allowed to have multiple currency conversion variables and use different currency conversion variables in different queries. We have about 40 queries that use old currency conversion variable in BWP. If I’ll move new query with a new currency conversion variable to BWP, will it cause any problems for the existing reports that use an old variable? I want to know whether it will present a problem running 40 reports that are already in prod besides the fact it will be inconsistent for a while until I’ll switch all reports to use a new variable.
    I don’t know why that variable got corrupted.  A few weeks ago basis applied some patches in BWP and copied it to BWQ and BWD systems but I am not sure that caused a problem.
    I am relatively new to BW and will very much appreciate any help. I haven’t done transport to production for more that a week and cannot wait any more.
    Thanks,
    Polina
    BWD – DEV;  BWQ – QA  and BWP - Production

    I was dealing with this problem for more than a week. Finally I got help from SAP today. As it was explained to me, we were using very old version of BW front end (part of SAP GUI) which became incompatible with the new patches we applied in BWP and copied to BWQ and BWD. Basically, I was told to upgrade BW front end that caused problems especially in the Variable Wizard area.
    I repaired the currency conversion variable and move it to production. So far all reports run ok in production.
    If anybody will have problems with currency conversion variables, please check your front end version.
    Thanks.

  • Currency Coversion and Exchange Rate Issue

    Hi,
    I have a scenario in query which is related to currency conversion and exchange rates.
    Company Code     Matter Code      Invoice          Invoice date     Amount     
                        Number          (DD/MM/YYYY)
    1001          1111          INV101          01/01/2011     $100
    1001          2222          INV202          05/01/2011     $150     
    1001          3333          INV303          10/01/2011     $200     
    1001          4444          INV404          15/01/2011     $250
    Here , Amount field is in GBP currency by default.
    User gives choice as USD on selection screen and the amount field is converted to USD in output.
    Now, I wonder which day's exchange rate is applied for same ??
    And what steps should I do if I want to apply a particular day's exchange rate ??
    i.e.
    Consider that there are different exchange rates maintained on daily basis.
    For each invoice number (INV101 , INV202.....) There is an invoice date (01/01/2011, 05/01/2011...).
    The corasponding output amount should take that particular date's exchange rate for conversion of currency.
    How to achive same ??
    I have gone through t-code RSCUR for same. Nothing helpful found.
    I have even gone through some documents for currency conversion., but unable to find out such scenario.
    Please help me for same.
    Edited by: Sachdev_Nirav on Aug 5, 2011 11:53 AM

    Sachdev-
    Currency translations are a very complex issue for BW developers. What you need to do is manage a currency translation that is based on the exact 0CALDAY of the transaction. Here are some helpful hints
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975?quicklink=index&overridelayout=true
    The standard SAP business content includes some standard translations as shown in the article, like these:
    0MEANTODAY Average rate using actual date (0SY-DATUM)
    u2022 0MEANDAILY Average rate using 0CALDAY of the data record
    u2022 0TRA_DATE Average rate using 0TRANS_DATE of the data record
    u2022 0PSTNG_DAT Average rate using 0PSTNG_DATE of the data record
    u2022 0DOC_DATE Average rate using 0DOC_DATE of the data record
    However, you MUST have a translation available in the main SAP Currency translation table (Transaction oB08 ) for the period in question, and you MUST report in the appropriate date. If, for example, you wish to report in an aggregate by 0CALMONTH, for example, the currency translation will need to be associated with 0CALMONTH, and the exchange rate will not calculate on a day by day basis, but on the standard that you set for the month. So, to your users, the data will be 'wrong'.
    A more robust method involves adding a value field to your data soiurce that uses the currency exchange rate in effect as of the day of the transaction. We do this in our data models, to with:
    Mexico Data source:
    Each value field will be available in the document currency(whatever), the company code currency(MXP), and in the corporate currency (USD).
    Good luck ! Most users don't understand the whole issue, and we spend a bit of time explaining it to them.

  • Curr Translation in Query for Current rate

    My requirement is to have a fixed target currency as USD, and convert that to local currency (multiple as applicable for each record)   after query execution.
    So I selected the KF in the query with Conversion type = 0MEANTODAY. and Target curr = USD.
    then i execute the query to get values in USD. Now when i right click and uncheck the box which says " Consider Currency translation from Query Definition" ; I get all the values in Local currency.
    the problem is - this conversion is not picking up current exchange rate - it's picking the one for past week.
    What am I doing wrong here and how can i resolve this without any backend development ?

    Thanks Veerendra for the input although that did not resolve my issue.
    you're saying I should check the data is in Sync between the ECC and BI system - right ? - I will do that.
    But i tried to tie back the exchange rate that the report output is giving with TCURR in NBI , TCURR in ECC and V_TCURR in ECC. It does not match up with any of these. that's what's bothering me - that where is it really reading the exchange rate from ?
    Thanks,
    Shweta

Maybe you are looking for

  • Using Time Capsule to extend network

    Hello: I have a Belkin N1 wireless modem router (ADSL) and have my Time Capsule connected the the modem via ethernet cable. I have the modem at the moment connected to my MacBook Pro via ethernet cable, and am able to connect to the Internet in that

  • IPhone 4 -- printing images

    I took about 50 pics of lists.  I need to print them.  I thought of emailing them to my laptop to print.  I use either gMail, AOL mail or Mail.com via Chrome.  How would I add attachments?  Or, can I print from the iPhone without buying attachment wi

  • Mail of vendor's code

    hi, in what table I can see the email of the number of vendor? I didn't find in tables lfa1 and lfb1 but I can see the email in transaction FK03.

  • Setting up FTP on Domain Controller using User Isolation

    Hi all, Our FTP site is set on a domain controller (not best practice i know, but i wasn't involved in the implementation of it) However, it currently works with the "FTP Root Directory" option selected, however this is not very secure as everyone ha

  • Slideshow Decoder issue

    I've seen a few people having this problem but haven't seen a solution that works. Spece/tech details are... Windows 8 Pro 64Bit 32Gb Ram 1TB+ free space Intel I7 3820CPU Nvidia GTX 560Ti GPU Master Suite CS6 All Software/OS updates applied. I am try