0n hp m276nw error printer cannot connect the server

i am trying to set up scan to email every time i go through the proses at the end i get this message on hp m276nw error (printer cannot connect the server) i put the out going email in then i put in the printer port and server number in when i do the test it says  error printer cannot connect the server any help will be well come

Hello youssi,
Welcome to the HP Forums!
I understand when you scan to email you're receiving a message stating cannot connect to server. I will do my best to assist you! Please follow this entire HP document on How to Scan: From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) just to make sure everything is correct.
If this doesn't work, then please follow these steps to try setting an alternative DNS to see if that resolves the issue:
•    Open the Embedded Web Sever on your computer.
•    Click the Network tab.
•    Under Wireless click on IPv4.
•    Under DNS Address Configuration select Manual.
•    Set the Preferred address as 8.8.8.8
•    Set the Alternate address as 8.8.4.4
•    Click Apply twice to confirm the change.
•    Turn the printer Off and back On and see if the issue is resolved.
Please post your results, as I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

Similar Messages

  • HP ENVY 4500 Printer "Error. Cannot connect to Server"

    Hey everybody,
    I work in IT and have a client that recently purchased a HP Envy 4500 all-in-one. She called me to install it for her and I got it set up with no problems. After a few days she told me that her printer wouldn't scan. It was giving her this error message;
    "Error. Cannot connect to Server. Check Server name and address."
    She has this computer connected via USB and I have already reinstalled the driver and ran the HP Print and Scan Doctor with no success. I have tried a lot of other solutions that people have been posting with the same issue but none have worked. This has become a huge issue and I don't see HP trying to find a solution. If no soultion will fix this, then I will be returning this printer for her and getting something that works.
    Any help would be greatly appreciated,
    bbritt91

    Hi bbritt91,
    Welcome to the HP Support Forums. I understand that you are getting a connection error message when trying to use the scan to email feature of your Envy 4500 printer.
    To be able to use the scan to email feature the printer must be setup with web services which requires the printer to be connected to your wireless network with an active internet connection. I have included the Getting Started with ePrint document for reference.  
    If the printer has been setup with a wireless connection, please set a manual IP address and manual DNS server for the printer. I have included a link to another post with the steps, including screen shots, on how to do this. Please don’t worry that the screen shots are for a Photosmart 7510, the steps are the same.
    Please let me know how it goes.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Updating ipod touch to os5.1  got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box.  Any ideas?

    Updating ipod touch to os5.1  got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box.  Any ideas?

    #1
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    #1.1 n/a because the errror message overrides it
    #2 see #1
    #3 iOS: Device not recognized in iTunes for Mac OS X
    But could be caused by #1
    #4 Covered by previous ones
    #5 Obvious jpegs are photos and thus will not sync as videos. Also see:
    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
    iTunes: Frequently asked questions about viewing and syncing videos
    #6 iOS: If you can't back up or restore from a backup in iTunes
    First #7 See #6
    Second #7 You have so many other problems resolve those first
    #8 Resolve other problems first

  • Error message "cannot connect to server"

    Often I get an error message "cannot connect to server" when
    I want to connect to acrobat.com directly from a .pdf document in
    order to upload it . Is it possible that there is some security
    issue involved, e.g. that the document is protected somehow? Or
    could browser or firewall settings be involved?

    Hi Peterernst,
    Thanks for posting.
    Perhaps yes, firewall, and browser popup blockers have been
    known to cause some behavioral, and connectivity issues within
    Acrobat.com
    Users have had success with allowing *.acrobat.com as a
    trusted site locally, to see if that allows connectivity.
    Also what browser, and OS are you using?
    If still in the Unix environment, do you have access to a
    Windows, or Mac environment?
    Thanks!
    Pete

  • Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"

    Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"
    What are the correct mail account settings and more importantly the correct DNS settings
    Thank you for any help you may be able to provide
    Cheers
    Chris (iMac i7)

    Do not delete the old account yet. sign up for an iCloud account if you haven't.
    I understand .mac mail will still come through. Do not delete the old account yet.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
              •          Server name: imap.mail.me.com
              •          SSL Required: Yes
              •          Port: 993
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    SMTP (outgoing mail server) information:
              •          Server name: smtp.mail.me.com
              •          SSL Required: Yes
              •          Port: 587
              •          SMTP Authentication Required: Yes
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

  • Scan to Email Error Message "cannot connect to server. check server name and address"

    I have a HP Officejet Pro 8600 Plus. 
    I've been using this printer for several months.  Now am getting an ERROR message when I try to scan to email that it "cannot connect to server. check server name and address" 
    I'm not sure how to check this.  We can all still print remotely via the internet connection. 
    Anyone have any ideas?

    Thanks for the info.,
    Did you recently change your operating system or network router that started to cause this error?
    Check out this thread - http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Configuring-quot-Scan-To-E-mail-quot-on-HP-...
    You may also need to change the printer DNS settings manually - http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-8500-Scan-to-Email-setup-cant-conne...
    Thanks

  • Printer cannot connect to server

    Hi,
    I have recently purchased a HP 6510a and it says successfully connected to my network. I've printed out the reports as outlined in the support pages and had passes. Downloaded the Scan and Print doctor and troubleshooting software to no avail. It has a static IP address assigned in my router.
    I have connected the printer to my main machine with a USB and all is fine, but when searching for it from my other machine linked wirelessly it cannot find printer (also main machine cannot convert to use wireless - same issue). I then tried to go into ePrint on printer and check for firmware updates, but that says 'cannot connect to server'. Is there some port I need to unblock in my router, or something?
    Thanks,
    Paul.

    Let's set a static IP address AND an external DNS for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway.
    - Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
    - Click 'Apply'.
    Your antivirus software/firewall could be getting in the way, here.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Live Auction on ABAP Server: Error mess: "Cannot Connect to Server" in LAC

    Dear SRM friends,
    we are on SRM 7.0 EhP1 and would like to us Live Auctions.
    I've activated Business Function SRM_SOURCING_1 and the switch for Live Auction on ABAP Server.
    I'm able to create a auction and when I click on Button "Live Auction" the Live Auction Cockpit starts
    with the contents of the created auction (Name, number, status published, item, bidder).
    But the screen is blocked. After a few seconds the message "Cannot Connect To Server" with a time stamp appears.
    Thanks in advance for your help!
    Regards
    Stefan

    Hi Stefan,
    Pl see note 685069. Might help.
    Best regards,
    Ramki

  • I keep getting an error message "Cannot connect to server."

    Can someone please help me with my phone, I cannot access Internet or my apps I keep getting an error message saying it cannot connect to server

    Assuming that your phone isn't jailbroken or hacked to unlock:
    1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
    2. Settings > General > Reset > Reset Network Settings

  • Printer cannot connect to server issue

    hp office jet 6500a plus ,windows 7, trying to e print from an app and my printer thats wireless says it cannot connect to server

    For those who are experiencing ongoing issues with their web services, you can attempt to try the following steps that may
    help resolve your problems.
    1.) Completely shut down your printer and restart it
    2.) If you have prints that have not printed, log into ePrint Center (or create an account if you do not have one) and
    then look for your printer status. If printer status is green but you still have pending jobs, delete the pending jobs one at
    a time (Starting with the oldest first). There may be a print job stuck in the queue that further restricts other jobs from
    completing.
    a. If option 1 or 2 above still doesn’t work, removing web services and re-adding web services will cause the printer to
    reattach to the cloud.
    b. Please note that if you attempt option 3, you will get a new eprint email address (and lose your custom one with no
    ability to get it back) furthermore, you will need to re-add your printer back to your ePC account.
    I am an HP employee

  • Distribute Form: Cannot Connect To Server

    Hi Everyone,
    I am trying to distribute a form through Acrobat.com however when I go to distribute and enter my account credentials it gives me an error saying "Cannot Connect to Server." Is the free service down or do I need to guarentee certain ports are open?

    I am still having this issue and it has been several days so I don't think there is an outage at adobe, what else can I check? Are there ports that need to be checked in order for it to connect to the server when I try to distribute a form?

  • I get the error messages: "Server not found" or "Cannot connect to Server" and thus cannot print. I don't even know what a server is.

    Hello: I am not computer savvy.
    I have run "Network Diagnostics" and the message "Cannot connect to Server" comes up. I can connect to the internet. I have tried turning off the whole system and the printer individually and nothing seems to change the message.

    hello,
    i got the same issue i'm using kde the link abe for "Adding a login manager (KDM, GDM, or XDM) to automatically boot on startup" guide is dead
    arkham wrote:Have you tried the inittab approach for starting kdm? http://wiki.archlinux.org/index.php/Add … tab_Method
    could you help me please ?
    Thank you
    Last edited by hael (2012-05-05 08:57:44)

  • My win 7 home premium cannot connect the sharing printer (EPSON L1100) in Windows server 2003 it say "Windows cannot connect to the printer. Accses denied"

    in My office there is a win server 2003 R2 computer, i install a printer Epson L1100 in that computer, and it successfull, and i can print using that printer from that computer..
    I already share this printer, but when i try to connect the printer from my laptop using OS Win 7 Home Premium.. it has error
    "Windows cannot connect to the printer. Accses denied"...
    and then i try connect using other computer but same OS (win 7 Home premium) it still has same error...
    i usually connect to the server computer using //(the ip of computer) , for example
    //52.30.20.66 .. that is my IP server..
    and than i right click in shared printer which appears in windows explorer, and i choose
    Connect...  but it contain error "Windows cannot connect to the printer. Accses denied"..
    anyone know the solution from this error???
    i`m sorry if my english is bad.. i`m from indonesia

    Got a local password/username on your Win7 ? Create the same on the 2003R2 as you seem in workgroup
    net user /add useraccountname mypassword
    net localgroup users useraccountname /add  (I think it's users the name, you can validate to be sure) or
    net localgroup administrators useraccountname /add in worst case.
    nb, or add the user guess in the printer share security
    Regards, Philippe

  • My iPod touch 4th gen. Keeps giving me the error message "cannot connect to the app store when I sign in. I can open the app store and browse it but I can't download anything. I have full signal strength with my wi-fi and safari is working perfect.

    My iPod touch 4th gen. Keeps giving me the error message "cannot connect to the app store when I sign in. I can open the app store and browse it but I can't download anything. I have full signal strength with my wi-fi and safari is working perfect. I turned it off and restarted it 3 times now. I have an iPad 2 and the app store works flawlessly with it. What is going on?

    Same here on my lpad2. Can access the web just fine from browsers but cannot install new apps or updates in appl store.  Seeing a few others reporting same issue tonight so likely an apple server issue and staff will notice it in network monitors and fix it...sometime this weekend.
    Rob

  • I recently updated to iOS 8.0 on my Ipad however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this?

    Hi, I recently updated to iOS 8.0 on my Ipad mini however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this problem? Also i cannot download anything from the App store as a result of this.

    Can you check the Object Security for the Analysis Menu and Export button and see if it is restricted?
    Also, is this a Oracle DB?  IF so, has the following 32 bit Oracle Client components been isntalled:
    Oracle Objects for OLE
    Oracle Data Provider for .NET
    Oracle Providers for ASP.NET

Maybe you are looking for