0ORGUNIT_HR01_HIER Status Tab Green/Details Tab Overall Status Red

Hello,
We have been loading the Organization Hierarchy for quite awhile. Somewhere along the way, the following started happening. The Monitor shows the InfoPackage load as green (successful). The Status Tab shows both the Total and Technical as green. The Detail Tab has Overall Status as red and the Transfer line is red but all the others (Request, Extraction, Processing, Subsequent Processing, and Process Chain) show as green. The Transfer line can't be expanded. In total it says 'Transfer (IDocs and TRFC): Missing Messages'. There is no short dump and no system messages. The Step-by-Step Analysis shows all green. Records seem to be loading. Can anyone explain the RED Transfer line and RED Overall Status on the Detail Tab?
Thanks,
Diane Merrill

Hi,
It means the all the record has been reached the BIW, but some missed info idcos . So nothing to worry about it.
With rgds,
Anil Kumar Sharma .P

Similar Messages

Activated Aggregates still shows Status RED. How do I fix this?

Hi,
I created aggregates based on a 2 queries which are having some performance problems.
I then Saved, and Activated. During the activation, there was a message that an existing aggregate Stat29 will be overwritten. I chose Yes at that point.
Within 5 mins when I refreshed the screen, for Stat20, Status was Green but Filled column was Red. After 30 mins, both the Status and Filled columns became Green.
The problem is that still after one hour, my activation created 4 new entries:
Max Min 0
Max Min 2
Min 0
Max 2
and all these are still showing RED for the Status and for Filled columns.
1. What could be going on? Is it an indication of a problem?
2. What do these represent and mean: Max Min 0, Max Min 2, Min 0, Max 2
3. Is there a way to confirm that the Aggregates have been filled
4. How do I confirm that the aggregate can now be used by the two queries I created the aggregates for?
Thanks

Hi Amanda,
1. What could be going on? Is it an indication of a problem?
If I understood it right, you are seeing additional aggregates than the one that you have created based on the two queries. The additional aggrs are the system suggested aggrs, if you dont want them you can delete them.
2. What do these represent and mean: Max Min 0, Max Min 2, Min 0, Max 2
These are the system suggested aggrs, if you dont want them you can delete them.
3. Is there a way to confirm that the Aggregates have been filled
If you see a green lights at the Status and Filled columsn your aggrs are filled and ready for action.
4. How do I confirm that the aggregate can now be used by the two queries I created the aggregates for?
You can confirm if proper aggrs are being used or not using RSRT. In RSRT enter the query tech name and select Execute+debug. In the popup screen select "Display Aggregate Found" under "Aggrs". Click continue and execute the query, when you see the query result click the Back(green) arrow in the top toolbar. The next screen should give you the aggregates used information, keep clicking the back arrow for all the aggrs used.
Hope this helps...Assign points if it does.

XI GRMG Scenarios showing Runtime status Red

Hi,
I configure the GRMG Monitoring for XI.
But I am getting the runtime status RED.
Can any one help in debugging this issue? All my Java Components are running fine.
Thanks,
Nagarjuna.

Hi Nagarjuna,
Please take a look at these..
http://help.sap.com/saphelp_nw2004s/helpdata/en/de/9bdb4064da712ae10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/4f/2c9f3f12e1eb0ce10000000a114084/frameset.htm
cheers,
Prashanth

DELTA CACHE REFRESH getting the status red

Hi,
while doing the DELTA CACHE REFRESH getting the status red. There be a traffic light displaying RED on the right part of the screen.
regards,
bobby

I think you are talking about sxi_cache related refresh. If yes, then you may check the following:
1. Service user PIISUSER is not locked.
2. RFC Destination INTEGRATION_DIRECTORY_HMI is working properly.
Regards,
Prateek

CCMS Status red

hi ,
Integration engine is in status red in component monitoring .I tried a self test and the CCMS status is red.
I cleared all the alerts in CCMS and repeated selft test.Even then the integration engine is in red and the CCMS too.
Anybody please help to resolve the issue.
Thnks,
Am

Hi,
The alerts contain a status indicator with a color and a numerical value. Yellow means a warning, red means a problem, and the numerical value shows the severity of the reported error.
You can configure the CCMS alert :
RZ20>>activate maintenance mode>>>Monitor >>create
create a new monitor by copying an SAP monitor
change the rules to include all systems
select your new monitor >>change>>select node ccms_define_r3_system, Edit>>change and change the parameter values for systems
enablee remote monitoring in RZ21
create a peoperties variant and activate it.
go back i RZ20 and assign methods
you can also define auto reaction method to enable emails in case of alerts. and assign method to a node...
Also check:
http://help.sap.com/saphelp_nw04/helpdata/en/0c/e65b3b18debb64e10000000a11402f/frameset.htm
regards,
Jyoti

In RZ21 the Check CCMS Connectivity is showing status red

Hi,
While configuring ECC5.0 in to solution manager 4.0 I am getting the CCMS Connectivity status red. All the RFC's which were generated while configuring are working fine. Please advice.

Hi,
You are getting the status as "Not cleared" which means that the payment has not yet been done.
Please do this by using the T.Code "F-28".
Goto the T.Code "F-28".
Enter the date,G/L account,Amount.Select the document number.
Click on "Process open items".
Enter your document number.Ensure that the not assigned is equal to "0".
Click on Simulate.
Save.
Before doing this goto the T.Code "FBL5n".
Click on "open items".Your sales order will be displayed in open items.
When you pay this amount it will be displayed in "Cleared items".
Simultaneously,the status will be changed.
Regards,
Krishna.

My ipod shuffle 2nd gen suddenly stops playing music after 15-20 mins.First it flashes green light and then flashes red light rapidly. Any solution to this ?

My ipod shuffle 2nd gen suddenly stops playing music after 15-20 mins.First it flashes green light and then flashes red light rapidly. Any solution to this ?

A 2nd gen shuffle is about six year old at this point. The likely cause is a battery that is worn out, with greatly reduced capacity or inability to hold a charge. The initial green light shows a good charge. The red light means the battery is drained.
Since the shuffle still appears in iTunes, you can try doing a Restore in case the cause is related to corrupted software on the shuffle. The Restore button is on the shuffle's Settings screen in iTunes. This will erase the shuffle, re-install its software, and set it to default settings.
Also, when the light becomes red and the shuffle stops playing, try turning OFF the shuffle for at least ten seconds. Then, turn it back ON. This resets the shuffle. Does it play again? If it does, let it play until it no longer plays again. Repeat turning it OFF and ON until it no longer plays. Then, connect it to power and charge it to full. See if that makes any difference.
If that does not help, the solution is to replace the battery. If you have a repair shop do it, the cost is probably uneconomical, compared to the cost of a brand new 4th gen shuffle ($50) that has more features, and a new set of headphones, plus a one-year warranty.
If you are good at such things, this web site has repair guides
http://www.ifixit.com/Device/iPod_Shuffle

Process chain overall status red - single processes green

Hi,
I'm monitoring a process chain in RSPCM. Some of the steps within the chain went red during the run but went green after repeating those steps. But now my overall status of the chain is still red. How can I set the overall status of a process chain without rerunning it? I don't want to set the status of a single process step but the overall status of the process chain as all steps of the chain are green now.
Cheers,
Alex

If you process chain is designed like
Ex: ZABC
Start-->Local Process chain
And assuming if any process failed inside teh local process chain , the entire Local process chain will be in Red, If you want forcefully change this ZABC chain, then
Goto Log view and Docuble click on the Local Process chain>Goto Chain tab>Copy the Variant and Instance
Goto Se11--> RSPCPROCESSLOG >Pass the copied Variant and Instance here and then execute>Copy the Log id from generated table entry
Now got Se37--> rspc_process_finish -->Enter the copied Variant , Instance , Log id , I_Type , I_State ('G' For Sucessfuly completed) and execute. Now the Local process chian will turn to Green and then the entire PC will in turn green(since this chain has only start process and Local process types, where as start process type is already in Green colour)
Or if you chain is designed like
Start>IP>Delete index>DTPCreate index...
Then Copy the variant and instance of the Last process type in the process chain and the same procedure as mentioned above
Edited by: YJV on Aug 19, 2010 12:11 PM

Process Chain Status Red, DTP status yellow, DTP is green from inside

Hello All,
I have a problem where the Process Chain status is red, but the process(DTP) status is yellow.
When I right click on the yellow process there is no error message and the DTP is green in Process Monitor.
But the chain did not complete and the rest of the process steps are grey.
After 20 minutes the Process Chain ran again(automatically after new data arrived) and this time without errors and it went green.
My question is, how to proceed with the red Process chain and complete the further process and make it green.
Regards
Alex

hi,
There are scenarios where you need to change status of a process chain or a particular step in process chain.
You might need to change the status in the cases where we need mark these steps successful so that dependent steps get processed. There are other scenarios where one needs to change the status of a single step in the process chain or status of whole process chain.
Step by step instructions on change process chain status
1. Right click on the failed step in the process chain monitor and go to displaying messages
2. Go to u2018Chainu2019 tab and note down variant, instance and start date
3. Go to SE16 and the table RSPCPROCESSLOG and enter variant, instance and start dates from step 2 and note down log_id, type, variant, instance.
4. Go to SE37 transaction and execute the function module RSPC_PROCESS_FINISH and enter the values from step 3 and enter the new status u2018Gu2019 in status field and execute the FM
5. This sets the status of the process chain (PC)
After you set the status using the FM, go to the monitor screen of the process chain, you will notice the changed status. Now dependent steps in the process chain will start running
Thanks

Data Package 1 ( 0 Data Records ) at DTP with Status RED

Hi All,
For 0 records at DTP level it is showing Overall status & Technical status as RED and yellow beside Data Package 1 ( 0 Data Records ). There is no short dump no error message. At PSA level in status tab the message displayed is Status 8 which says no data on R3 side for this particular load. Help me out.
Regards,
Krishna.

Hi,
if traffic light is not highlighted, you are probably running a delta.
You will have to set the traffic light in the according init.
(and run init again )
the setting in the delta will be the same.
Udo

DTP Technical status red

Hello all,
I have a BI 7.0 system which is being recently upgraded with EHP1.
After this upgrade we are facing two problems with DTP.
1) The techical status of the DTP is getting red and We have to manually set the status green.Whichever setting we use in update and execute tab.
There is absolutly no problem with the records and there are no records in error stack also.
2) We are geting a short dump of ITAP duplicate key.After we change the setting in DTP to no update no reporting in update tab it runs successfully.
What can be the pronlem.
Please help.
Reagrds,
Pratighya.

Hi ,
Is there any semantic key declaration for this DTP.
The semantic key declaration gets deactivated when u change the setting to No update No reporting
Let me know if there is any sematic key declaration and any routine created in the related transformation
Prathsih

Mail to File Integration(Mail Sender Communication channel status RED)

Hi all,
I am doing Email to File Integration Scenario, XI is reading mails from an particular exchange server mail id & putting it in to a file. now all IR & ID configuration is done.
But in RuntimeW Bench -> Adapter Monitreing The Sender Mail Communication Channel is RED with error occured: exception caught during processing mail message; java.io.IOException: invalid IMAP status response; not finding * STATUS, but 00KC NO The requested item could not be found

We check the Exchange Server login Acess through TELNET ,as suggested from SAP Service marketplace
and login is successfull, with details available of Inbox
but in TENET when we try to execute the IMAP Status command error message comes
" expected space not found" .
Since XI is not able to read the inbox mail, so Sxmb_moni is blank.....
can any body suggest that this issus is related to that IMAP Status..........or some thing else..
our URL is correct.
Regards,
Ashutosh

the URL path was wrong...
it should end with .......exchange/Inbox/
the sender channel was having error RED ,but it was showing green status intially because delay update .....
Regards
Ashutosh

Process chain status RED even though successful

Hi Gurus,
Process of my procss chain show status as RED though it is successful and it does not stop the further processes. in the end whole chain is run successfully & this process showing red.
What could be the reason.
regards
Vikash

which process is failed data loading or activation job? is this chain automatically executed or some one scheduled manually? in general when a process failed and we ran it manually and you donot get a repeate option then we can trigger the remaining processes of this process chain using a funtion module in SE38, seems your remaining chain ran in the same way, after this also your process chain overall status will be in Red, if it is data load then you can force it to Green ( you ran it manually), so that your chain over all status will become Green.

Adapter Engine self-test status red / Error

Hi.
Im having trouble figuring out what to do about this error.
In Runtime Workbench --> Component Monitoring --> Integration Server --> Adapter Engine, the Adapter Engine self-test (and ping status) are in error.
The error message is: HTTP Request failed. Error code: "403". Error Message: "Forbidden [http://<server>:<port>/AdapterFramework/rtc]".
Anyone have an idea?
Regards...
Peter

Hi again.
Looking in the default trace I get this Info:
Hope it contribute to a solution.
Regards...
Peter
ACCESS.ERROR:
Authorization check for caller assignment to J2EE security role [sap.com/com.sap.aii.af.app*AdapterFramework : xi_af_rtc].
Exception when reading settings:
Thrown:
MESSAGE ID: com.sap.aii.rwb.exceptions.rb_CommunicationException.HttpReqFailed
com.sap.aii.rwb.exceptions.RequestFailedException: HTTP request failed. Error code: "403". Error message: "Forbidden [http://<server>:<port>/AdapterFramework/rtc]"
at com.sap.aii.rwb.exceptions.RequestFailedException.forHttpErrorCode(RequestFailedException.java:79)
at com.sap.aii.rwb.rtcheck.rtcclient.GrmgConnector.request(GrmgConnector.java:238)
at com.sap.aii.rwb.rtcheck.rtcclient.GrmgConnector.getSettings(GrmgConnector.java:105)
at com.sap.aii.rwb.core.XIRTCComponent.refreshConfigParameters(XIRTCComponent.java:279)
at com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel.getConfigParameterCategoriesForSelectedXIComponent(CmMainModel.java:424)
at jsp_component_monitoring1209546798419._jspService(jsp_component_monitoring1209546798419.java:579)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:566)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:190)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at jsp_FC_Secure1209546795341._jspService(jsp_FC_Secure1209546795341.java:15)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:566)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:190)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
User XIRWBUSER, IP address
HTTP request processing failed. HTTP error [403] will be returned. The error is [You are not authorized to view the requested resource.No details available].

Request Status Red

After data load from ODS to Cube request status is RED.But data successfully transfered and validated the data,exactly it matching.No where I am getting log also.What could be the problem.But forcibly made it to green.But in production i cant change the QM status.Please valuable inputs
Rajesh

Hi,
If it happens only for this target, go to Mange screen ---> Environment (From Menu) ---> Automatic Request Processing ---> Tick the checkbox that Set Quality Status to OK. This will ask a transport request, collect this into TR and move to Quality and Production.
If this happens for all systems, make the Extraction Monitor settings in SPRO.
Hope this helps,
Regards,
Rama Murthy.

0ORGUNIT_HR01_HIER Status Tab Green/Details Tab Overall Status Red

Similar Messages

Maybe you are looking for