0PM_CATIND & 0PM_PLANIND where is text datasource in ecc,0PM_OPER install

dear friend,
I have 0PM_CATIND - Maint.Orders Category Indicator and 0PM_PLANIND - Maint.Orders Planning Indicator in BI, where to find its text datasource in ECC, i havent found in ECC rsa5, is such text datasource required to create?
2) I have 0PM_OPER - Operation Number for PM is new master Infoobject in PM where Maintanance order is compound,
I have install it but it installed only with infoobject not any attribute or trasferrule or updaterule, Is it required to do manually mapped with any datasource? or required to copy its attribute from other master infoobject attribute?
if anybody have workerd already on this Info object.
Thanks
Dushyant.

could you explain how help.sap was of help? and also, what is the name of the extracter is RSA5 that you linked them to?
thanks for you help. i am having the same issue.

Similar Messages

  • ORG UNIT TEXT Datasource (Long Text)

    Hi All !
    In RSA6, for the datasource 0ORGUNIT_TEXT, I can see short & medium text. But when checked the extractor structure ROTEXTSTR1, there I can see all the three text short, medium & long text. Requirement is to bring long text from the ECC. How to bring the long text from the extractor structure in the Datasource?
    With Regards
    Reks

    Check in the Table ROOSFILED , you can see the field long text (TXTLG) --  the object selection is set to 'A'
    where A -  Field in OLTP and BW Hidden by SAP.
    Try to change the entry of selection to X and activate the entry in the table.
    Where X - Selection Adjustable, Visibility Set.
    Hope this helps...

  • Populate combobox2 From database WHERE combobox1.text = something

    I want to populate combobox2 from database WHERE combobox1.text = something. Here is the code I have and also I am using datable so I want to keep it that way
    private void cbCompany_SelectedIndexChanged(object sender, EventArgs e)
                this.cmpLocationTableAdapter.FillLocbyCmp(this.shahiemsDataSet.cmpLocation, cbCompany.SelectedText.ToString());
                cbLocation.DataSource = shahiemsDataSet.cmpLocation;

    The result is a blank combobox2(cbLocation).
    Hello,
    Did you mean that the combobox2 bound to the datatable cbLocation, but it didn't contain any item, right?
    If so, it seems that the method FillLocbyCmp didn't fill any data to that datatable, to troubleshoot this case, we need to check the following tips.
    1. Whether the database for that dataAdapter contains any data, and whether you connected to the right database.
    2. Whether that database could get any result filtering by that text value.
    3. Whether that method could get that datatable filt succeccfully.
    Since we could not get code about that FillLocbyCmp method, if possible, you could share them with us.
    Regards,
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • 0GLACCEXT Text Datasource

    Dear Gurus,
    I'm in the process of loading Text Datasource for  Info Objects "0GLACCEXT" , I'm not sure which datasource to select ,
    while going through forums , I've used  the DataSource "0GL_ACCOUNT_TEXT" to load the text data into "0GLACCEXT".
    Is this the right approach ? I'm able to load the data till PSA but when scheduling DTP I'm getting the following error.
    "too many error records , update terminated "
    Please advice.
    Regards,
    -Neha

    Hi Neha,
    I dind't find a datasource to fill the text for InfoObjects "0GLACCEXT". What I found is a thread where it says how i could be loaded.
    [Re: 0GLACCEXT vs 0GL_ACCOUNT - How it is USED?|Re: 0GLACCEXT vs 0GL_ACCOUNT - How it is USED?]
    Here you can find information about hierarchy, maybe you can use the tables from R3 to create a custom extractor to fill the text.:
    [http://help.sap.com/saphelp_nw04/helpdata/EN/64/032de5ff014c4c86bc15272216a5e2/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/EN/64/032de5ff014c4c86bc15272216a5e2/frameset.htm]
    Regards, Federico

  • Text datasource enhancement

    hello guys
    I am trying to enhance text datasourcein R3 and got this problem.
    I am trying to load texts for infoobject 'material number' fromR3 table MAKT.....I created view on fields MANDT,MATNR,MAKTX (client,material number,material description) and then created generic datasource onthis.now I replicated and loaded texts to Infoobject 'Material Number'  in BW.
    Now I want to enhance text datasource in R3 so that I will add field MAKTG (material description in capital letters) from MAKT table...I added append structure in extract structure...then I want to write code in CMOD....Here I choose RSAP0001 enhancement...then EXIT_SAPLRSAP003 for enhancing text datasource...here there is no code provided by SAP...so wrote my own code..and activated and then unchecked 'hide field' ....saved the datasource....nowcame to Extractor Checker RSA3 to check if code is working....I am able to see the new field MAKTG but its not populated..it means my code or my way of doing enhancement is wrong...Can anyone please suggest any solution....
    here is my code:
    data: l_s_ZOXID30088 like ZOXID30088 ,
           L_TABIX LIKE SY-TABIX.
    case I_CHABASNM.
    when 'MATNR'.
    LOOP AT  C_T_TEXTS INTO L_S_ZOXID30088.
    L_TABIX = SY-TABIX.
    SELECT SINGLE MAKTG FROM MAKT INTO L_S_ZOXID30088-ZZMAKTG WHERE MATNR =
    L_S_ZOXID30088-MATNR..
    MODIFY C_T_TEXTS FROM  L_S_ZOXID30088 INDEX L_TABIX .
    ENDLOOP.
    ENDCASE.
    Thanx,
    S
    Edited by: SChandx200 on Sep 11, 2009 6:37 AM

    Hi,
    Just check once if the function module EXIT_SAPLRSAP_003 is active...
    Becuse after writing code int he include ZXRSAU03 you will have to activate the funciton module...
    This has to be done the first time when you implement the include...
    If still it doesnt work.. You can put a break point in your code and then debug from RSA3 to chk whey it isnt working...

  • Create a dynamic form where selected text boxes appears, based on options chosen in a drop-down box

    HELP!!! Can anyone please provide some guidance on how to create a dynamic form where selected text boxes appears, based on options chosen in a drop-down box.
    I have a form which – based on the department that's selected from a drop-down box – will have different form fields/text boxes, etc, made available.
    Is this possible in LiveCycle, if so, can you please provide the script/info - as needed.
    Thanks,

    In the preOpen event of the second dropdown list you put something like (in formCalc):
    if (dropdown1 == 1) then
    $.clearItems()
    $.setItems("Year, 2 Year,  3 Year")
    elseif (dropdown1 == 2) then
    $.clearItems()
    $.setItems("3 Year,  4 Year")
    endif

  • How to retrieve the 'Where Clause' text?

    Hello all,
    I have created a package to retrieve all the DML's executed against the database for the day, for a particular user. DBMS_LOGMNR package was used to retrieve DMLs. But the DMLs retrieved have their 'WHERE' clause text converted to ROWID's. I need to find out the 'WHERE' clause with the parameters.
    I tried retrieving values from the v$sql views, but that information is cryptic and very volatile.
    Is there a way to retrieve the 'Where' clause? If not, is there a way to retrieve the 'WHERE' clause information using a trigger against the corresponding table.
    I am desparately lookin'for a solution. Hope someone out there can help me out.
    Regards,
    Prabu Raghav.

    Hi Andrew,
    Thanks for the suggestion.
    I am using Oracle 8i not 9i.FGA using DBMS_RLS let's me add policies and retrieve all other information about a user except the SQL statement that's executed by the user.
    I want to retrieve the Current sql statement executed against the table by a particular user and record it.
    Any suggestions?
    Regards,
    Prabu Raghav.

  • WHERE clause text.

    Hello all,
    I have created a package to retrieve all the DML's executed against the database for the day, for a particular user. DBMS_LOGMNR package was used to retrieve DMLs. But the DMLs retrieved have their 'WHERE' clause text converted to ROWID's. I need to find out the 'WHERE' clause with the parameters.
    I tried retrieving values from the v$sql views, but that information is cryptic and very volatile.
    Is there a way to retrieve the 'Where' clause? If not, is there a way to retrieve the 'WHERE' clause information using a trigger against the corresponding table.
    I am using oracle 8i and tried SYS_CONTEXT current_sql parameter. But Current_sql is not available in 8i, it's from 9i onwards.
    I am desparately lookin'for a solution. Hope someone out there can help me out.
    Regards,
    Prabu Raghav.

    Hi Andrew,
    Thanks for the suggestion.
    I am using Oracle 8i not 9i.FGA using DBMS_RLS let's me add policies and retrieve all other information about a user except the SQL statement that's executed by the user.
    I want to retrieve the Current sql statement executed against the table by a particular user and record it.
    Any suggestions?
    Regards,
    Prabu Raghav.

  • How to create generic text datasource to load text data?

    met issue in generic master data load
    Hi,
    please see above link for detail infomation regarding the attribute data load. now the language and description column of the infoobject s_saled is empty. i need to create a generic text datasource to load data from R3 to BW. the table which i use to extract attribute data is VBAK, but i don't find any filed relate to language and description.
    met issue in generic master data load
    can anyone tell me how to load the text data?
    thanks very much.
    Eileen

    hi eileen,
    go to transactio rso2  in your source system ie r/3.
    there u have three three fields for transaction data
                                                    attributes.
                                                     text.
    choose text and proceed as u did for trancsaction data load.
    thank u,
    reward if helpful.

  • Default locale support for texts datasources

    Hi,
    I faced with problem - does BW support default locales ?
    I have some texts datasources which contain some list of entries for default locale. The question is - what value of LANGU field I should setup for  these entries in order to BW recognize them as for default locales ?
    Thanks. I will be apprecated for any related info.
    Fiodar.

    Hi Fiodar,
    well I am not sure about your requirement, but it sounds like you want to add a default value to langu in case the source system doesn't deliver it.
    If this is the case, create a update routine in your transfer rules for 0langu. In the routine add the following coding:
    if tran_structure-spras is initial. "no language specified
    usually the R/3-field is called spras
      result = sy-langu. "or a literal like 'EN' ...
    else.
    pass the given language to the result of the routine.
      result = tran_structure-spras.
    endif.
    That's it.
    In case your datasource doesn't even deliver a field for the language, you can just set a constant value to 0langu in your transfer rules.
    regards
    Siggi

  • Details: Numbers not translating an Excel document with column headings where the text is rotated counter clockwise 90 degrees with-in the cell.  Can you tell me how I can rotate the contents with-in a cell?

    Details: Numbers not translating an Excel document with column headings where the text is rotated counter clockwise 90 degrees with-in the cell.  Can you tell me how I can rotate the contents with-in a cell?

    Numbers does not have rotated text within cells.  You can place a text box over the cell that has rotated text but you cannot rotate text within a cell.

  • Connection to text datasource fails with REP-4100

    I built a Report with text datasource; doing like the "how to" document tells:
    (set up the textpds.conf, attach text datasource to the report)
    I use the file:///&<p_file> user parameter to define the datasource file and location like described in this reports forum
    "Dynamic name for Text Pluggable Data Source".
    Using report builder everything works fine; I can change the location of text datasource via user parameter as I need.
    Porting the report to production environment (unix) and using the rwservlet the Report fails.
    REP-4100: Failed to execute data source
    java.lang.NullPointerException
    Has Anyone an idea how this can resolved?
    Thanks a lot
    Jost

    Just found the solution myself:
    I need to pass the &<p_file> parameter value without "file:///"
    only "C:/myhomedir/text.txt"
    or "/usr/home/myhomedir/x.txt" on unix platform.
    Parameter passing via URL also works.

  • Transporting DataSources in (ECC) problem

    Hi SCN,
    Just wanted to ask if these are only the two important nodes when collecting and transporting an enhanced datasource?
    I am currently transporting datasources from ECC DEV to ECC QAS. When reviewing my datasources in QAS, append structures were not transported.
    - What I did here was to transport datasources from RSA6. I though it would carry all the changes made in the datasource but it was just the active datasources.
    So I collected the datasources again in a new TR; collecting the requests only in one TR (as per discussions in SCN). First is re-activating the append structure; putting it in a new TR, then collecting the active datasource.
    I am just having doubts if I am missing a step since the (Go To -> Object Directory Entry) is not letting me make a new transport inside the extract structure (double clicking the datasource; double clicking the extract structure; then object directory entry), thus, I am not able to collect the standard extract structure table (or is this because the datasource I am transporting is a standard one?).
    Thanks in advance for any assistance you can provide.
    Thanks.

    I always thought that I need to collect it in one TR (Active datasource, Extract Structure and Table Structures). But, it was okay to have the append structure in another TR.
    What I did was to transport the DataSource then followed by the append structure's TR. It's all good now.

  • How to debug extraction  a datasource in ecc starting execution in bw ?

    HI gurus,
    how to debug extraction  a datasource in ecc starting execution in bw ?
    Thanks.

    Hi,
    In your issue i thick data source trace in BW is not possible but RFC is the main criteria here if it is correct data will comes to the bw automatically when ever info package triggers.
    If you need to check the data source data in trace mode and it is not coming properly, then we need to check from RSA3 by executing with debug mode check box option.
    Still need any clarification let me know.
    Thanks & Regards,
    Srinu.Rapolu

  • Adding Text datasource

    Hi,
    i have this situation. there exist flat file datasource that  has the option of loading master data, text and hierarchy.
    right now there is only infopackage for loading master data. I have tried right click - create infopackage for loading text but it only gives me the option of master data.
    I do I get this infopackage for loading the text/description.
    thanks

    Hi Bhat,
    For loading Master data Text follow these steps,
    First double click your dataSource(PC file datsource) , in this trasfer Structure---> select the datasource of Text type over there .
    based on this selection your datasource structure has changed like this ID, 0Langu, 0txtsh. Activate your datasource now.
    Now create a new Infopackage for Text data or use your existing infopackage , select the text datasource and load your Master data Text file.
    Note: Assign points if it helps
    Regards,
    Arun.M.D

Maybe you are looking for