0PM_ORDER_STATUS data source problem

Hello,
the Data Source 0PM_ORDER_STATUS contains in the source system the field UTMS - UTC Time Stamp in Short Form (YYYYMMDDhhmmss). This field is selected for replication to BW System.
After replication in BW and assigning to the info source the field UTMS is appeared there as well.
But we cannot see the field in Data Selection Tab of InfoPackage. As a result we get error in PSA - the system reqiures this field for extracting.
How to troubleshoot this problem. Thank you.

Hi,
It is because of a limitation for SAP datasources, you are generally not able to use decimal fields as selections.
Besides, i have another question. I wonder if delta records are populating for the datasource 0pm_order_status for your system. I just activated the datasource but not able to fetch delta records. In RSA7 there is never any LUWS executed and so on records.
Thanks,
Ceyhun

Similar Messages

Create a new OSB domain and data source problems

Hello,
I noticed a problem while create a new OSB domain with Oracle Service Bus 10gR3 on Solaris 10 (intel-based).
This domain is composed of two managed servers deployed on a cluster.
I have configured the JMS reporting data sources to use an Oracle 10g (XE) database (driver Oracle Thin (non XA)) installed on a remote server.
While trying to start my managed servers, the startup process of these managed servers failed due to a data source problem on "wlsbjmsrpDataSource" or "cgDataSource-nonXA".
The workaround I found is to delete and recreate (through the WLS console) the data sources "wlsbjmsrpDataSource", "cgDataSource-nonXA" and "cgDataSource".
In this situation, my managed servers can be started properly.
Is it a known problem located on the configuration wizard?
Thanks for your help.

Hi
For the answer.
I fully understand that those datasources are default ones and are mainly related to JMS reporting.
But my question was probably not well expressed.
The problem I had is when the domain is created, the managed servers won't start due to problems related to theses datasources.
The workaround I found is to delete and to create those datasources from the WLS console.
In this situation, the managed servers are able to be started.
I want to know if this is a known problem/limitation of OSB 10gR3 with Solaris 10 and Oracle 10g?
Thanks for your help.

XML Data Source Problem

Hi there,
I am creating a data source for XML....
all needed services are there (/SICF)
Web service was created..and it is active
I create DataSource..and I check it.... everything is Ok until here..
By activating the DataSource I got an error
Error generating web service..
what could be the problem ? or how could I know more about the problem...I do not get more than that message...
I will thank any help or advice
FedeX

Hi there,
I am creating a data source for XML....
all needed services are there (/SICF)
Web service was created..and it is active
I create DataSource..and I check it.... everything is Ok until here..
By activating the DataSource I got an error
Error generating web service..
what could be the problem ? or how could I know more about the problem...I do not get more than that message...
I will thank any help or advice
FedeX

data-source problem error 503

i m using oracle10g database . through jdev-embedded 0c4j , i want to run my strut application . i m having problems with data-source entry.
i give either of following 2 entries in struts-config.xml and get this error
503 Service Unavailable
Servlet error: Initializing application data source org.apache.struts.action.DATA_SOURCE
my data-source entries are
1
data-source type="org.apache.commons.dbcp.BasicDataSource"
name="jdev-connection-DBConnection1"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="scott" password="tiger"
url="jdbc:oracle:thin:@localhost:1521:ORCL"
inactivity-timeout="30"/>
ps :- i have added dbcp in my default project properties
or i use
<data-source name="jdev-connection-DBConnection1"
class="com.evermind.sql.DriverManagerDataSource"
location="jdbc/DBConnection1CoreDS"
xa-location="jdbc/xa/DBConnection1XADS"
ejb-location="jdbc/DBConnection1DS"
pooled-location="jdbc/DBConnection1PooledDS"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="scott" password="tiger"
url="jdbc:oracle:thin:@localhost:1521:ORCL"
inactivity-timeout="30"/>

To get quicker help (or to get help at all), please use a more suitable forum. I think, your problem is not a general database problem, but very specific. Try
http://forums.oracle.com/forums/index.jsp?cat=13
(topic OC4J/J2EE)

MapViewer data source problem in the morning

Hi all,
I have the Oracle Application server 10g and Oracle database 10g installed on 2 different computers. On the application server I have installed MapViewer the last version.
I have defined a datasource in the configuration file and that works perfect.
My application uses mapviewer through java and displays the generated image in an jsp. The same working as the demos though.
Each night there is a backup of the database made on the other computer.
The MapViewer/data source remains open through the night. When I come to the office in the morning, and i try to access my webpage with the mapviewer image, I get an
500 Internal Server Error, java.lang.NullPointerException...
I check in the admin page of the map viewer the following:
<list_data_sources /> - The datasource is still defined
<data_source_exists data_source="blabla"/> - The datasource exists
If i try to <list_predefined_themes data_source="blabla" /> I get again an error. It seems that the connection with the database is not working.
If I <redefine_data_source ..> or <restart/> mapviewer everything starts to work again without problems.
I have attached further some erros I have in the log file, maybe it will help you to help me ;-)
Regards,
Adrian
Thu Feb 02 08:10:28 CET 2006 ERROR [oracle.sdovis.theme.pgtp] *** Exception while querying theme: LEVEL_1
Thu Feb 02 08:10:28 CET 2006 ERROR [oracle.sdovis.theme.pgtp] java.sql.SQLException: I/O-uitzondering: Connection reset by peer: socket write error
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
Thu Feb 02 08:10:28 CET 2006 ERROR [oracle.sdovis.DBMapMaker] Message:Exception while querying theme: LEVEL_1
Description: Nested exception is:
java.sql.SQLException: I/O-uitzondering: Connection reset by peer: socket write error
java.sql.SQLException: I/O-uitzondering: Connection reset by peer: socket write error
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:286)
Thu Feb 02 08:10:28 CET 2006 WARN [oracle.sdovis.MapMaker] null MBR resulted from buildDataMBR.
Thu Feb 02 08:10:28 CET 2006 ERROR [oracle.lbs.mapserver.core.RealWorker] Message:[SDOVIS] No spatial data to render!
Description:
 at oracle.sdovis.DBMapMaker.renderEm(DBMapMaker.java:1304)
 at oracle.sdovis.MapMaker.renderMap(MapMaker.java:1399)
Thu Feb 02 08:10:28 CET 2006 ERROR [oracle.lbs.mapserver.core.RealWorker] Message:null
Thu Feb 02 08:10:28 CET 2006
Severity: 0
Description:
Message:[SDOVIS] No spatial data to render!
Description:
 at oracle.sdovis.DBMapMaker.renderEm(DBMapMaker.java:1304)
 at oracle.sdovis.MapMaker.renderMap(MapMaker.java:1399)
Thu Feb 02 08:12:45 CET 2006 ERROR [oracle.lbs.mapserver.core.MapperConfig] java.sql.SQLException: I/O-uitzondering: Connection reset by peer: socket write error
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)

Hi,
please post how you did define the data source in the configuration file.
Thanks.

JSF & Data source Problem

Hi all
I wrote my first jsf-adf project as discussed in cue cards in developer 10.1.3 using sql server 2005 , I configed my oc4j and app module as discussed in "Developing Oracle ADF Business Components for a SQL Server Database " paper in the same release of jdeveloper but I have 2 problems
1. when I Config my environment without adding data-source into data-source.xml
I get jbo-30003,jbo-29000 and jbo-26066 errors in the ie
2. If i define my customized data-source in data-source.xml I get this error:"Unable to create com.evermind.sql.DriverManagerDataSource "
my data-source code is
"<data-source
class="com.evermind.sql.DriverManagerDataSource"
name="SQLServerDS"
location="jdbc/SQLServerCoreDS"
xa-location="jdbc/xa/SQLServerXADS"
ejb-location="jdbc/SQLServerDS"
connection-driver="com.microsoft.jdbc.sqlserver.SQLServerDriver"
username="sa"
url="jdbc:microsoft:sqlserver://127.0.0.1:143;SelectMethod=cursor;User=sa;"
inactivity-timeout="30""
what should I do?
by thanks
Javaneh

Hi
I tried both of data sources which you explianed but the problem already exists:
when I set the data source which you called global I received this error in the log window :
May 29, 2006 9:42:30 AM com.evermind.server.XMLDataSourcesConfig parseRootNode
INFO: Legacy datasource detected...attempting to convert to new syntax.
May 29, 2006 9:42:30 AM com.evermind.server.XMLDataSourcesConfig createConfigFromLegacy
WARNING: Exception processing legacy data source. Exception: Unable to instantiate com.microsoft.sqlserver.jdbc.SQLServerDataSource. Exception is:
 Missing class: com.microsoft.sqlserver.jdbc.SQLServerDataSource
 Dependent class: com.evermind.server.XMLDataSourcesConfig
 Loader: oc4j:10.1.3
 Code-Source: /E:/Programs/JDeveloper/j2ee/home/lib/oc4j-internal.jar
 Configuration: <code-source> in boot.xml in E:\Programs\JDeveloper\j2ee\home\oc4j.jar
This load was initiated at oc4j:10.1.3 using the Class.forName() method.
The missing class is not available from any code-source or loader in the server.
06/05/29 09:42:30 Error initializing server: Error instantiating default application at Unable to get ApplicationConfig for default : Error parsing data-sources config at file:/E:/Programs/JDeveloper/jdev/system/oracle.j2ee.10.1.3.34.12/embedded-oc4j/config/data-sources.xml: DataSourceConfigException: Unable to instantiate com.microsoft.sqlserver.jdbc.SQLServerDataSource. Exception is:
 Missing class: com.microsoft.sqlserver.jdbc.SQLServerDataSource
 Dependent class: com.evermind.server.XMLDataSourcesConfig
 Loader: oc4j:10.1.3
 Code-Source: /E:/Programs/JDeveloper/j2ee/home/lib/oc4j-internal.jar
 Configuration: <code-source> in boot.xml in E:\Programs\JDeveloper\j2ee\home\oc4j.jar
This load was initiated at oc4j:10.1.3 using the Class.forName() method.
06/05/29 09:42:30 Fatal error: server exiting
The missing class is not available from any code-source or loader in the server.
Process exited with exit code 1."
and when I set the data source which you called local
I see Jbo-30003;Jbo-29000 & Jbo-26066 errors in IE
I can't understand what is wrong
By thanks
Javaneh

UCCX 8.5 Data Source Problem

Hello,
I am trying to read and write information in db_cra database through CCX Editor but I can not see the data source. I was trying to add a datasource to see the db_cra database but the test connection always is failure, I do not see any message about de error so, I do not what can be the problem. I show you a picture of how I am configuring de datasource.
Someone can help me to solve this problem please.
Ok, I understand that I can read or write un db_cra, but I have to see de db_cra like a datasource rigth ?

You cannot add db_cra as a datasource; at least not without becoming unsupported. Informx isn't even a supported database in the compatibility matrix. The only route I can even imagine this working in would be a custom Java class or using an off-box web service that serves as a middleware. Building either of those are well beyond the scope of my knowledge though.
Please remember to rate helpful responses and identify helpful or correct answers.

Generic text data source problem

Hello Gurus,
I am trying to create a generic data source for an iobject needed in my analysis (shipment conditions, 0SHIP_COND - I haven't been able to find appropriate txt DS in RSA5 for it).
I located its texts in a table TVSB. It contains 3 fields: Client, Shipping Cond. and Description.
I tried to create a DS based on this table in RSO2, but when I check it afterwards, it does not have the Description field. That means only the Shipping Cond. code field is in created data source.
What can be the cause that when I create a data source based on a table, the system skippes some fields from this table?
Could anyone provide a solution to this problem?
Regards,
Alek

Ah, thank you
BTW: For a future reference:
How can I check that a table is "really" a table, valid for - for example - making a DS based on it?
I have opened TVSB in SE16 and it looked "OK", just like a regular table (for example, I compared it with TKUKT, for customer class, which is valid for making a data source on it, and they both looked the same (in structure).
Is there a way to distinguish a "valid for DS" table? Or it's just the know-how you need to get through your experience?
Edited by: Aleksander Dyl on Dec 10, 2008 11:27 AM

Add data source problem

This is my problem:
When I select the Data option in the Main menu bar or in the Server Navigation window and then select the Add Data Source option, the Edit Database Server Types window is displayed instead. If you try to cancel or close the window it will only be redisplayed. The only way out of this is terminating the program with the Windows Task Manager.
Platform: Windows XP
Creator: 2004Q2 Update 8
Thanks in advance for any help
lasc

hi,
when i try to add a data source i usually get a dialog box titled Add Data Source in which there are options to decide on the Server Type among other options ,
i dont know if this is the type of dialog box u r getting , and if so then nothig is wrong,
bu if not! i have no idea why is that happening but i can suggest that it is normal to decide on the data base server before creating the data source in order for the creator ro use the right driver, i guess so,
Good luck,
sssnbj

BI7 Data source problem.

Hi Friends,
We are using standard datasouce for Master data (0CUST_SALES_ATTR) . W activated this data source, replicated in BW and migrated to BI 7.0 .It is working fine in development. . Before trasnporting to Quality we replicated the data source In Quality system..
When we transport to quality system, tha Data Source is Active. However, when we schedule from info package, we are getting the error Data Source must be replicated" Based on this error message, we replicated the data source again and still we are getting same error.
We are thinking that it is behaving like BW 3.5 object instead BI7 after transport.
Could you please share your thoughts about this Issue.
Regards,
Nagesh.

Hi,
Before Transporting the data source, in case you are using only BI 7.0 data sources please make the setting in
RSA1 -- Tools -- Conversion of Logical System names.
Here in the mapping for the source system click the check box for 7.0.
Alternatively you can use T code RSDS to migrate the Data source to BI 7.0 in qulaity system.
Regards,
Nitin Pardeshi
Assign Points if useful

Jasper Report with XML data Source problem

I have a problem in getting a report run on my machine..
I have a report that uses XML-dataSource to read info stored in xml file, I use XPath query to traverse xml nodes,
I have JBoss Server installed but the problem is that I want to know how to configure JBoss and tell it where to look for the xml file so the report can produce right information.
I use Windows XP and JBoss 4.23 and I finished the report using i-report 2.0.2
please I need the configuration steps to make this report work... thanx in advance

Hi,
Have a look at below URL.
http://ireport.sourceforge.net/cap7.html#7.4
Regards
VInK

Jndi data source problem

I am starting up using Jdeveloper with the integrated WebLogic server. I immediately ran into the problem described in this thread:
http://forums.oracle.com/forums/message.jspa?messageID=3348590#3348590
I followed the instructions for the workaround, but i can't make it work. I have a couple of questions:
1. Step one of the workaround, <name>-jdbc.xml, is the <scope>Application tag the key change here? If yes, my file already had it.
2. As far as i can see, the weblogic-application.xml file is created automatically when i deploy. How do i edit the file?
3. Adding <property name="eclipselink.target-server" value="WebLogic_10"/> to persistence.xml, as suggested in the thread, causes deployment to fail with no specific error message.
4. What's the deal with the ".../jdbc/jdbc..." vs ".../jdbc..." part of the setup? I assume it should be ".../jdbc/jdbc...", but why the mix-up in the documentation?
5. Is there a fix available if i upgrade my Jdeveloper? Am i wasting my time on a workaround for an error that's been solved?
Can someone please help me out here?

I ended up using a workaround instead.

Data source problem

Hi,
iam able to see this error while testing a datasource,on one of the RAC node ,while the remaining RAC nodes are working,can any one please tell me is there anything to
be done on weblogic side.
weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Listener refused the connection with the following error: ORA-12514, TNS:listener does not currently know of service requested in connect descripton

Maybe this can help: http://ora-12514.ora-code.com/

Application Module Data Source problem

I have a project which has multiple App Modules (AM). I have deplyed the application on Tomcat 5.5. The database connection is configured as DataSource. When I start the application the first app module connects to the database and works properly but when I go to page which refers to some other AM, it throws an error (SQL Exception unable to create Connection pool ). Is it possible for other AMs to use the datasource used by the first AM?

Refer
Multiple Application Modules with 1 Connection?
Configure multiple Application Modules

Data load problem - BW and Source System on the same AS

Hi experts,
Im starting with BW (7.0) in a sandbox environment where BW and the source system are installed on the same server (same AS). The source system is the SRM (Supplier Relationship Management) 5.0.
BW is working on client 001 while SRM is on client 100 and I want to load data from the SRM into BW.
Ive configured the RFC connections and the BWREMOTE users with their corresponding profiles in both clients, added a SAP source system (named SRMCLNT100), installed SRM Business Content, replicated the data sources from this source system and everything worked fine.
Now I want to load data from SRM (client 100) into BW (client 001) using standard data sources and extractors. To do this, Ive created an InfoPackage in one standard metadata data source (with data, checked through RSA3 on client 100 source system). Ive started the data load process, but the monitor says that no Idocs arrived from the source system and keeps the status yellow forever.
Additional information:
BW Monitor Status:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System Response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
BW Monitor Details:
0 from 0 records
but there are 2 records on RSA3 for this data source
Overall status: Missing messages or warnings
- Requests (messages): Everything OK
o Data request arranged
o Confirmed with: OK
- Extraction (messages): Missing messages
o Missing message: Request received
o Missing message: Number of sent records
o Missing message: Selection completed
- Transfer (IDocs and TRFC): Missing messages or warnings
o Request IDoc: sent, not arrived ; Data passed to port OK
- Processing (data packet): No data
Transactional RFC (sm58):
Function Module: IDOC_INBOUND_ASYNCHRONOUS
Target System: SRMCLNT100
Date Time: 08.03.2006 14:55:56
Status text: No service for system SAPSRM, client 001 in Integration Directory
Transaction ID: C8C415C718DC440F1AAC064E
Host: srm
Program: SAPMSSY1
Client: 001
Rpts: 0000
System Log (sm21):
14:55:56 DIA 000 100 BWREMOTE D0 1 Transaction Canceled IDOC_ADAPTER 601 ( SAPSRM 001 )
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T100 message and the parameters.
Additional documentation for message IDOC_ADAPTER 601 No service for system &1, client &2 in Integration Directory No documentation exists for message ID601
RFC Destinations (sm59):
Both RFC destinations look fine, with connection and authorization tests successful.
RFC Users (su01):
BW: BWREMOTE with profile S_BI-WHM_RFC (plus SAP_ALL and SAP_NEW temporarily)
Source System: BWREMOTE with profile S_BI-WX_RFCA (plus SAP_ALL and SAP_NEW temporarily)
Someone could help ?
Thanks,
Guilherme

Guilherme
I didn't see any reason why it's not bringing. Are you doing full extraction or Delta. If delta extraction please check the extractor is delta enabled or not. Some times this may cause problems.
Also check this weblog on data Load errors basic checks. it may help
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Thanks
Sat

0PM_ORDER_STATUS data source problem

Similar Messages

Maybe you are looking for