0PP_C02 2LIS_04_P_MATNR inactive

Hi all,
Im trying to use the cube 0PP_C02 but Im facing hard time to get the update rule 0PP_C02 2LIS_04_P_MATNR active.
It brings an error message like:
"Field /BI0/APP_O0100 is unknown It is neither in one of the specified tables nor DATA statement". It asks me to review the program; however, Im actually installing business content (havent done any customization).
Thanks Claudiomar

Hi Bhanu,
Thank you for such a quick answer. I need to use the cube 0PP_C02 and was installing it from Business Content. Nothing against using any required ODS.
I thought when installing the cube with "Grouping = In data flow before" I didn´t have to worry about this.
Is there an order I should follow when installing the CB OPP_C02? Where can I find such an order if there is any?
Thanks,
Claudio

Similar Messages

Datasource 2LIS_04_P_MATNR inactive

Hi Experts,
We changed a data flow with DSO instead of Cube. I have created a DSO with Datsource 2LIS_04_P_MATNR and it was good. While creating, I have activated update rules which was not required in 7.0 flow. So I deleted that DSO and while deleting deleted the update rules and transfer rules for the datasource 2LIS_04_P_MATNR in Dev and released teh request to Quality. Now I see the datasource 2LIS_04_P_MATNR inactive in Dev and there are no infopackages under it. When I try to create infopackage , it says, No active transfer rule for DS 2LIS_04_P_MATNR and source system DU6CLNT010; create first... How to go about this and activate datasource? Or if I transport the request backwards from Quality to Dev, will it work? Please advice.
Thanks,
Chandra.

Hi Vidya Sagar,
Thanks for your response. It's a 3.x emulated Data source, now when I try to create Info package, it pops up a message :
No active transfer rule for DS 2LIS_04_P_MATNR and source system DU6CLNT010; create first...
If so , how to create transfer rules for an 3.x emulated Datasource, I didn't experience this? Kindly do suggest?
Thanks,
Chandra.

Data sources for 0PP_C02

Hi Gurus,
I need to develop report which should show Production : quantity & value of goods produced monthly for that i found 0PP_C02

Hi Gurus,
I need to develop report which should show Production : quantity & value of goods produced monthly for that i found 0PP_C02
as suitable info provider. But when i install the related BI content update rule 2LIS_04_P_MATNR got installed in inactive state.And when iam trying to activate it its showing error message as " IC=0PP_C02 IS=2LIS_04_P_MATNR error when checking the update rules" . Is their any other suitable to achieve my reporting requirements.
Thank for your help in advance.
Regards

IF-statement in Personas that is checking if control is inactive?

Hi,
I have this simple script in screen personas that is clicking the option: "Attachment list". Everything is working great if there is attachments.
If there are no attachments the option is "inactive" or "greyed out". This will result in a script error.
I thought this was going to be an easy fix by adding IF statement to the the script. But howerver I specify the critera for the IF statement the script will always try to click the Attachment list. The condition will simply always be TRUE.
Am I missing something here or is it not possible at this time to script an IF statement that is checking if the control is inactive or similar?
Best Regards,
Oskar Söderlund

There is another way, but it will get a little tricky.
Outside of the transaction IE03 you can check for the existence of attachments for a piece of equipment by looking in table SRGBTBREL. Field TYPEID_A will be "EQUI" and field INSTID_A will be the equipment number, zero-padded on the left to 18 characters long. Use SE16 to look in the table and you'll get the idea.
You could wrap this test in an RFC-enabled ABAP function and call that from your Personas script button. Use the return value from that RFC to decide if attachments exist or not and how the script should respond. Details for how to write such an RFC and call it from a Personas script are in this blog: Calling RFCs from a Personas script.
Like I said, this isn't straightforward and perhaps Personas scripting should include an active/inactive test in addition to the exists/doesn't exist test. Until then, however, there is a way if you don't mind a bit of ABAP programming.

Error while activating all inactive infoobjects in DEV

Hai
Im trying to activate all inactive infoobject by using program RSDG_IBOJ_ACTIVATE. But it says the following error
System error in lock management
Message no. AD025
Diagnosis
A system error has occurred in the lock management function.
The system was unable to determine whether a lock entry existed for the selected object.
System Response
The selected object could not be locked.
Only display mode can be used.
Procedure
Make a note of the error code and inform your system administrator.
why it is like this
how can i activate all inactive infoobjects in development server.
kumar

Hi,
It seems objects are locked in transport request. Check the 'object directory entry' for the object and find out the transport request/task under which objects are locked. Remove the objects from TR or release the request and then try to activate.
Hope it helps.
Regards,
Aditya

Error while activating XI App: references the inactive object

Guys,
I am getting this error when I am activating my XI application .
Activation of the change list canceled Check result for Message Mapping Stockquote_Request_Map_01 | http://sapteched/XI/sessionid_XI251/inb/student_01: Object Message Mapping Stockquote_Request_Map_01 | http://sapteched/XI/sessionid_XI251/inb/student_01 references the inactive object RFC Message ZGET_STOCKQUOTE | urn:sap-com:document:sap:rfc:functions | ZGET_STOCKQUOTE Check result for Message Mapping Stockquote_Response_Map_01 | http://sapteched/XI/sessionid_XI251/inb/student_01: Object Message Mapping Stockquote_Response_Map_01 | http://sapteched/XI/sessionid_XI251/inb/student_01 references the inactive object RFC Message ZGET_STOCKQUOTE | urn:sap-com:document:sap:rfc:functions | ZGET_STOCKQUOTE.Response

Hi Manish,
Make sure you have saved and activated all your dependent objects. If you have imported RFC structure then check
for e.g. ZGET_STOCKQUOTE is your imported RFC structure then make sure its saved and activated.
Then try activating your message mapping.
Regards,
Sridhar

Active version of BW Data Source Dev Appears inactive in Q

Hi All,
This is urgent..needs to move to prod today but I am stuck in D still!
Does anyone know why a particular BW data source which is active inn Dev might appear to be inactive in Q after the transport?
We tried manual replication, transporting replica and reapplying the transports, recollecting the data source in both r3 and BW
I also verified that I am collecting the active version in my transport
Thanks,
DB
Points will be assigned if I can get rid of this issue!
Edited by: Darshana on Jul 14, 2008 7:34 PM
Edited by: Darshana on Jul 14, 2008 7:34 PM

Hello Darshana,
Make sure the appropriate "Conversion of Source System names after transport" are maintained in target system QA and Prod.
RSA1 > Tools >...
Darshana,
Follow the above path...Go to Datawarehousing Workbench in QA tcode RSA1 and on the top you will see Tools > and follow from there...
Hope this helps....
Edited by: Chetanya Thanneer on Jul 14, 2008 10:15 PM

Inactive component cost not rolled up to top level item

Hi
Our scenario is as follows: we have a top level item with a BOM. And some components of the BOM are having material status u2018inactiveu2019. Inactive means materials will not procured and sold, however we could have inventory which can be consumed in production of other materials. In other words inactive items are like old items. These inactive items already have costing value. And we donu2019t want to recost inactive items.
Having described above scenario, the requirement here is when we run costing for top level item, system should take costing value of inactive items and roll up into top level item costing which is NOT happening now. Client donu2019t want to recost inactive items. The reason for not recosting inactive items is the recosting could change cost of inactive items significantly. We are using 4.7 version and standard costing.
Would appreciate any ideas or suggestions in this regard.
thanx
Sunil

Thanks Young for the reply.
We already set 'do not cost' indicator for inactive components. And these inactive components do have standard costs valid up 10 12/31/2999. It seems bom explosion is excluding these materials. it is ok to exclude. However the existing standard cost of these inactive components did not roll up in to top level. when I checked the costing status log, it says material ABCDF123 in plant 3344 has material status 40: Inactive.
I checked BOM as well and inactive component is flagged as 'relevant for costing'.
We are using following valuation varaiant
Strategy Sequence -> 1. Planned Price 1 2.Standard Cost
Transfer Control - Complete Transfer
thnx

What is diff b/w active and inactive DCs

hi
please let me know what is diff between Active and Inactive DC's.
If possible send some FAQs on JDI
Thanks
-mmukesh

Hi Mukesh,
When you are developing somthing through JDI (NWDI), you will have inactive dc and active dc.
If you want to do some changes in code then you can do these changes through inactive dcs. Whatever changes you do in inactive DCs and until you check-in that activity. other developers cannot have those changes.
but, when you check-in your activity those changes will be visible to other developers who are working on the same DC but this updated code will not be reflected in active DC.
But when you activate that activity, those changes will be reflected in active dc and this active dc will be deployed on Development server.
In summary, inactive DCs contain intermidiate code which is not ready to deploy on Development server yet. This updated code is available in Active DC.
Hope now you are clear with Inactive and Active DCs.
Regards,
Bhavik

Is there a setting that allows firefox to follow redirects on inactive tabs?

I usually browse multiple pages at once. While one page is busy loading I like to switch tabs and read another page. The problem Ive recently encountered is that whenever there is a page redirect firefox will wait until the tab is active before following it.
For example sometimes when Im posting a message to a support forum (lets say forums.fedoraforum.org as just one specific example) it will submit my message and then try to redirect me back to the thread that I was posting to. I often switch tabs right after I click submit and expect the page to be loaded when I come back, but to my disdain firefox will wait until the tab is active before following the redirect, thus when I switch back it still has not even started loading the page yet.
I was hoping maybe there is an about:config setting or something that will allow firefox to follow these redirects while the tab is inactive?

A standard diagnostic step is to try Firefox's Safe Mode to see whether it is caused by a custom setting or add-on.
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in [http://support.mozilla.com/kb/Safe+Mode Safe Mode] using
Help > Restart with Add-ons Disabled
In the Safe Mode dialog, do not check any boxes, just click "Continue in Safe Mode."
If redirects now work normally, you can assume that an add-on or custom setting is the culprit.

Global inactivity vs appl. session timeout

Hi
We are planning to use sso for authentication . And we also have several j2ee applications which we are going to deploy. My question is this- typically how do we use global inactivity timeout with respect to application sesion timeout?? Are there any examples that I can look at?
Thanks
Krishna

Hi Steffen,
The direct answer to your question is NO :).
But:
- for WEB sessions, there is a possibility to set the default inactivity timeout with the global-web.xml. This applies only for the applications that haven't specified their timeout in their xml.
- for EJB sessions, again there is a possibility to specify the inactivity timeout via xml
If you need specific details, ask here and I or some of our other experts will fetch them for you.
Best wishes,
Nikolai.

Bonjour + Fast User switching = messages going to the wrong (inactive) user

We use iChat for Bonjour in our office– fast file transfers etc.
If a user is one of 2 or more logged in on a machine– through the use of fast user switching, we've noticed that incoming messages (initiated by another user on the network) will often go to the switched user (i.e. the inactive user) not the user we're currently logged in as.
We've been able to repeat the issue.
1. Log in as user 1, fast user switch to user 2 (leaving user 1 logged in but inactive)
2. Go to new machine, log in as user 3
3. Send message from user 3 to user 2
4. Look at user 2 screen. No messages
5. Send message from user 2 to user 3. User 3 will receive message, and will be able to send message successfully back to user 2.
6. Log out use 2
7. Log in as user 1
8. Notice all the messages that were going to the 'inactive' user profile.
Has anyone else seen this type of behavior?

HI MAtthew,
Welcome to the Apple Discussion Pages.
I have not seen this (I only have one Mac).
However there is an item in IChat Preferences > General section that can set the staus of the Users account to Offline or Away when using Fast User Switching.
What is yur set to and does it make any difference when changing it ?
Away in normal circumstance menas someone can still Invite you to chats (or Text you)
Ralph

On my HP Touchsmart 310 PC how do I increase the inactivity time on the display?

On my HP Touchsmart 310 PC how do I increase the inactivity time on the display? Windows 7, 64-bit

Hi,
Please try Control panel > Power options > Change when the computer sleeps
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Quota deduction when EE has been inactive for more than 180 days / Advance quota days when employee does not have enough balance

Dear experts,
We have two requirements regarding to the "Anual leave" quota.
1. Quota reduction when employee is inactive for more than 180 days
2. Advance quota days when employeee does not have enough balance
We have in place an "Anual Leave" quota related to a calendar year period, that gets generated dialy in time evaluation. This quota gets the employee entitlement from a set of rules that stored the corresponding balance in a period time type, that is the one that we defined in the customizing. This is working fine. The problems start when we try to incorporate the other two requirements.
Regarding the first requirement, if the employee has been inactive for more than 180 days in a calendar year due to unpaid leave, we need to start quota reduction as follow,
First, we need to clear the balance that was calculated above in the schema.
Then, we need to calculate one leave day for every 20 days worked till the end of the year, considering as such, everyday the employee is expected to work, except days on which the employee has been absent on unpaid leave.
For the second requirement we created a manual quota call "Advance Anual Leave". So, if the employee, wishes to take 20 working days holiday, but in his/her Anual Leave quota has only 10 days available, we have to create an "Advance Anual Leave" quota manualy for 10 days. When the quota for next year gets generated, we need to deduct these advanced 10 days from it. This deduction should stop the year after.
The problem we are finding with these two requirements is that, due to the Anual Leave quota gets generated dialy, we can't get the balance right.
Thanks in advance!
Kind regards,
Alex

Hello binbingogoABC,
Shopping on BestBuy.com should be easy and fun and not fraught with the kind of trouble that you describe. I regret very much that this has been your experience.
Using the information you provided when you signed up for Best Buy Unboxed I was able to locate your cancelled orders. I have requested more information from my back-office partners. As soon as I have additional details about your situation, I will reply again to this message. In the interim, I'm sorry that I must impose upon your patience.
I'm very grateful that you wrote to us with your concerns.
Sincerely,

CUCM 8.6.2 LDAP User Delete Pending LDAP Sync Status Inactive

BE6K ver 8.6.2
Client has a user who recently got married. They changed her account information in Active Directtory to reflect her new last name. At that point CUCM shows her as
Delete Pending
LDAP Sync Status Inactive
CUC shows
LDAP User has been deleted.
The user still exists in both CUC and CUCM and is actively takign and receiving calls. User has VM access.
Shorrt of deleting the user in AD and recreating her, is there a way to force this to re-sync?
Thanks
Matt

Then that's expected to happen, for all purposes to CUCM/CUC eyes, msmith no longer exists and will be deleted, and a new user mjones now will be imported.
Depending on when the change was done and when CUCM detected this, it might take up to 48 hours maximum to delete the user
You'll need to associate everything to the new user, and also add that new user into CUC.
Or switch back her userID to the old one, and just change the surname for directory purposes.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

0PP_C02 2LIS_04_P_MATNR inactive

Similar Messages

Maybe you are looking for