0pp_c15 activation error - Field /BI0/ACOPC_O0100 is unknown
hi,
There is an error occured while activating the cube 0PP_C15 - Backlogged production orders.Transformation 0PP_C15 80PP_DS01 is not active .
The following error shown in its transfer routine while trying to activate the transformation.
E:Field "/BI0/ACOPC_O0100" is unknown. It is neither in one of the
specified tables nor defined by a "DATA" statement. "DATA" statement.
Thanks & Regards
Shyne Sasimohanan
<removed by moderator>
Edited by: Siegfried Szameitat on Sep 29, 2010 3:53 PM
Hi,
Try to activate the DSO 0COPC_O01 and re-activate the transformation.
Hope this helps...
Rgs,
Ravikanth.
Similar Messages
-
Activation Error in ODS - Record mode 0 unknown (data record REQU_4DPGJKCKN
I created a generic extractor in R3 with a generic delta. In BW, my delta init loads with no errors but when I activate the data in the ODS, I get the activation error.
"Record mode 0 unknown (data record REQU_4DPQ31IK7WM9OTK26S5JMJ6LM/000001/"
I searched SDN but didn't found anything, and I searched help but only found general information about 0recordmode.
Can someone provide a solution and/or some more detailed information about the error message?
ThanksHello,
When you have created the InfoSource for the generic datasource, have you added field 0RECORDMODE to the InfoSource? When loading data to a ODS, 0RECORDMODE is essential.
The InfoObject is usually mapped to ROCANCEL (Indicator: Cancel Data Record) field of the extractor. This field is usually present in Standard extractors. But even if the field is not present in your extractor, add it to InfoSource Communication structure and leave it unmapped in transfer rules.
I think this might solve the problem.
Regards,
Pankaj -
Activation error while changing the data type of a field of a table
hi friends,
i am facing one problem while changing a data type of a field of a table.
i just created one table(Yqm32) .i have assigned charcter data type to one field(ztotal_count) .now i want to change this charcter data type to numeric data type.
while changing to NUMC data type activation error is comming as below.
Table is not yet classified
Field ZTOTAL_COUNT: Type change
ALTER TABLE is not possible
Structure change at field level (convert table YQM32)
Check on table YQM32 resulted in errors
Table YQM32 could not be activated
(E- Structure change at field level (convert table YQM32)
plz suggest.i need to change the data type from char to numc.
Thanks & RegardsHi Pabitra......
From the SE11 change the table as u wanted and then from menubar select
UTILITIES--> DATABASE UTILITY
It will open database utility
there u select the Activate and adjust database button.
then the database table will get adjusted.
just try it once.........
Suresh...... -
0IC_C03: 2LIS_03_BF Transformation Start Routine Activation error
Hi all,
Iam getting activation error (Start Routine) while activating the transformation for the 2LIS_03_BF (Material Movements) data source for 0IC_C03 INFO CUBE. Iam getting an error for the Start Routine and the error message is as follows:
+ E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".+
Scenario: As per my client requirment i have tried to add on info object in to the existing info cube i.e., Movement Type which is an existing field in the info source and the data source and i have tried to map the same in the transformations between the info source and the info cube and activated the transformation. Then iam getting the above said start routine error, so to avoid this i have removed that object i.e., movement type from the info cube and tried to reactivate the transformations still iam getting the same routine error.
Please suggest me th approach to resolve this issue.
Regards,
PrabhakarHi Chandu,
Please find below is the routine:
PROGRAM trans_routine.
CLASS routine DEFINITION
CLASS lcl_transform DEFINITION.
PUBLIC SECTION.
Attributs
DATA:
p_check_master_data_exist
TYPE RSODSOCHECKONLY READ-ONLY,
*- Instance for getting request runtime attributs;
Available information: Refer to methods of
interface 'if_rsbk_request_admintab_view'
p_r_request
TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
PRIVATE SECTION.
TYPE-POOLS: rsd, rstr.
Rule specific types
TYPES:
BEGIN OF tys_SC_1,
InfoObject: 0STORNO Reversal Indicator.
STORNO TYPE /BI0/OISTORNO,
InfoObject: 0RT_PROMO promotion.
RT_PROMO TYPE /BI0/OIRT_PROMO,
InfoObject: 0VAL_CLASS Valuation class.
VAL_CLASS TYPE /BI0/OIVAL_CLASS,
InfoObject: 0DOC_DATE Document Date.
DOC_DATE TYPE /BI0/OIDOC_DATE,
InfoObject: 0STOCKTYPE StockType.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Stock Categories.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0PSTNG_DATE Posting date in the document.
PSTNG_DATE TYPE /BI0/OIPSTNG_DATE,
InfoObject: 0COMP_CODE Company Code.
COMP_CODE TYPE /BI0/OICOMP_CODE,
InfoObject: 0BWAPPLNM Application component.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0MOVETYPE movement Type (Inventory Management).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0STOCKRELEV BW: Relevance to Stock.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0CPPVLC BW: Purchase Value in Local currency.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0CPSVLC BW: Sales Value in Local currency.
CPSVLC TYPE /BI0/OICPSVLC,
InfoObject: 0CPSTLC BW: Sales Value in Local currency.
CPSTLC TYPE /BI0/OICPSTLC,
InfoObject: 0CPQUABU BW: Amount in base unit of Measure.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0VAL_TYPE Valuation Type.
VAL_TYPE TYPE /BI0/OIVAL_TYPE,
InfoObject: 0PROCESSKEY BW: Transaction Key.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0BATCH Batch number.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0MATMREA Reason for Goods Movement.
MATMREA TYPE /BI0/OIMATMREA,
InfoObject: 0BUS_AREA Business Area.
BUS_AREA TYPE /BI0/OIBUS_AREA,
InfoObject: 0COSTCENTER Cost Center.
COSTCENTER TYPE /BI0/OICOSTCENTER,
InfoObject: 0SOLD_TO Sold-to Party.
SOLD_TO TYPE /BI0/OISOLD_TO,
InfoObject: 0WHSE_NUM Warehouse Number / warehouse complex.
WHSE_NUM TYPE /BI0/OIWHSE_NUM,
InfoObject: 0STOR_LOC Storage Location.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0STRGE_BIN Storage Bin.
STRGE_BIN TYPE /BI0/OISTRGE_BIN,
InfoObject: 0STRGE_TYPE Storage Type.
STRGE_TYPE TYPE /BI0/OISTRGE_TYPE,
InfoObject: 0VENDOR Vendor.
VENDOR TYPE /BI0/OIVENDOR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0DOC_NUM BW: Document Number.
DOC_NUM TYPE /BI0/OIDOC_NUM,
InfoObject: 0BASE_UOM Base Unit of Measure.
BASE_UOM TYPE /BI0/OIBASE_UOM,
InfoObject: 0DOC_YEAR BW: Document Year.
DOC_YEAR TYPE /BI0/OIDOC_YEAR,
InfoObject: 0PROFIT_CTR Profit center.
PROFIT_CTR TYPE /BI0/OIPROFIT_CTR,
InfoObject: 0DCINDIC Debit/Credit Indicator.
DCINDIC TYPE /BI0/OIDCINDIC,
InfoObject: 0LOC_CURRCY Local currency.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0PLANT Plant.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0FISCVARNT Fiscal year variant.
FISCVARNT TYPE /BI0/OIFISCVARNT,
InfoObject: 0CPNOITEMS BW: Number of activities.
CPNOITEMS TYPE /BI0/OICPNOITEMS,
InfoObject: 0CO_AREA Controlling Area.
CO_AREA TYPE /BI0/OICO_AREA,
InfoObject: 0DOC_ITEM BW: Document Line Number.
DOC_ITEM TYPE /BI0/OIDOC_ITEM,
InfoObject: 0VALUE_LC Amount in local currency.
VALUE_LC TYPE /BI0/OIVALUE_LC,
InfoObject: 0QUANT_B Quantity in base units of Measure.
QUANT_B TYPE /BI0/OIQUANT_B,
InfoObject: 0MOVE_PLANT Receiving Plant/Issuing Plant.
MOVE_PLANT TYPE /BI0/OIMOVE_PLANT,
InfoObject: 0RECORDMODE BW Delta Process: Update Mode.
RECORDMODE TYPE RODMUPDMOD,
InfoObject: 0RT_RMAPIDA RMA Physical Inventory Date.
RT_RMAPIDA TYPE /BI0/OIRT_RMAPIDA,
InfoObject: 0BWCOUNTER Additional Key Field Revaluation Document
*Record.
BWCOUNTER TYPE /BI0/OIBWCOUNTER,
InfoObject: 0INDSPECSTK Indicator: Valuation of Special stock.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0GN_R3_SSY Source System for R/3 Entity.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0RT_MOVINV movement Type is Physical Inventory.
RT_MOVINV TYPE /BI0/OIRT_MOVINV,
InfoObject: 0RT_MOVADJ movement Type is Stock Adjustment.
RT_MOVADJ TYPE /BI0/OIRT_MOVADJ,
InfoObject: 0RSL_STMAT Structured Article.
RSL_STMAT TYPE /BI0/OIRSL_STMAT,
InfoObject: 0RT_MOVRET movement Type is Return.
RT_MOVRET TYPE /BI0/OIRT_MOVRET,
InfoObject: 0RSL_STAUTO Automatically Completed Component.
RSL_STAUTO TYPE /BI0/OIRSL_STAUTO,
InfoObject: 0RT_MOVTRAN movement Type is Stock Transfer.
RT_MOVTRAN TYPE /BI0/OIRT_MOVTRAN,
InfoObject: 0RT_MATPOST Transfer Posting from Article to Article
RT_MATPOST TYPE /BI0/OIRT_MATPOST,
InfoObject: 0RT_SASTSV Share of Business Volume for Set Sales Val
*ue in Local crcy.
RT_SASTSV TYPE /BI0/OIRT_SASTSV,
InfoObject: 0RT_SASTST Share of Business Volume for Set with Tax
*in Local currency.
RT_SASTST TYPE /BI0/OIRT_SASTST,
InfoObject: 0COORDER order number.
COORDER TYPE /BI0/OICOORDER,
InfoObject: 0RMA_LNK RMA Stock Transfer Reference Item.
RMA_LNK TYPE /BI0/OIRMA_LNK,
InfoObject: 0RMA_RFLG RMA Relevance Flag.
RMA_RFLG TYPE /BI0/OIRMA_RFLG,
InfoObject: 0RTHFEES Stock Transfer Fees.
RTHFEES TYPE /BI0/OIRTHFEES,
Field: RECORD.
RECORD TYPE RSARECORD,
END OF tys_SC_1.
TYPES:
tyt_SC_1 TYPE STANDARD TABLE OF tys_SC_1
WITH NON-UNIQUE DEFAULT KEY.
$$ begin of global - insert your declaration only below this line -
... "insert your code here
$$ end of global - insert your declaration only before this line -
METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.
METHODS
inverse_start_routine
IMPORTING
i_th_fields_outbound TYPE rstran_t_field_inv
i_r_selset_outbound TYPE REF TO cl_rsmds_set
i_is_main_selection TYPE rs_bool
i_r_selset_outbound_complete TYPE REF TO cl_rsmds_set
i_r_universe_inbound TYPE REF TO cl_rsmds_universe
CHANGING
c_th_fields_inbound TYPE rstran_t_field_inv
c_r_selset_inbound TYPE REF TO cl_rsmds_set
c_exact TYPE rs_bool.
ENDCLASS. "routine DEFINITION
$$ begin of 2nd part global - insert your code only below this line *
TYPES:
BEGIN OF tys_SC_1_full,
InfoObject: 0STORNO Stornokennzeichen.
STORNO TYPE /BI0/OISTORNO,
InfoObject: 0RT_PROMO Aktion.
RT_PROMO TYPE /BI0/OIRT_PROMO,
InfoObject: 0VAL_CLASS Bewertungsklasse.
VAL_CLASS TYPE /BI0/OIVAL_CLASS,
InfoObject: 0DOC_DATE Belegdatum.
DOC_DATE TYPE /BI0/OIDOC_DATE,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0PSTNG_DATE Buchungsdatum im Beleg.
PSTNG_DATE TYPE /BI0/OIPSTNG_DATE,
InfoObject: 0COMP_CODE Buchungskreis.
COMP_CODE TYPE /BI0/OICOMP_CODE,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0CPSVLC BW: Verkaufswert in Hauswährung.
CPSVLC TYPE /BI0/OICPSVLC,
InfoObject: 0CPSTLC BW: VerkWmS Hauswährung.
CPSTLC TYPE /BI0/OICPSTLC,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0VAL_TYPE Bewertungsart.
VAL_TYPE TYPE /BI0/OIVAL_TYPE,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0BATCH Chargennummer.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0MATMREA Grund für die Warenbewegung.
MATMREA TYPE /BI0/OIMATMREA,
InfoObject: 0BUS_AREA Geschäftsbereich.
BUS_AREA TYPE /BI0/OIBUS_AREA,
InfoObject: 0COSTCENTER Kostenstelle.
COSTCENTER TYPE /BI0/OICOSTCENTER,
InfoObject: 0SOLD_TO Auftraggeber.
SOLD_TO TYPE /BI0/OISOLD_TO,
InfoObject: 0WHSE_NUM Lagernummer/Lagerkomplex.
WHSE_NUM TYPE /BI0/OIWHSE_NUM,
InfoObject: 0STOR_LOC Lagerort.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0STRGE_BIN Lagerplatz.
STRGE_BIN TYPE /BI0/OISTRGE_BIN,
InfoObject: 0STRGE_TYPE Lagertyp.
STRGE_TYPE TYPE /BI0/OISTRGE_TYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0DOC_NUM BW: Belegnummer.
DOC_NUM TYPE /BI0/OIDOC_NUM,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
InfoObject: 0DOC_YEAR BW: Belegjahr.
DOC_YEAR TYPE /BI0/OIDOC_YEAR,
InfoObject: 0PROFIT_CTR Profit Center.
PROFIT_CTR TYPE /BI0/OIPROFIT_CTR,
InfoObject: 0DCINDIC Soll-/Haben-Kennzeichen.
DCINDIC TYPE /BI0/OIDCINDIC,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0PLANT Werk.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0FISCVARNT Geschäftsjahresvariante.
FISCVARNT TYPE /BI0/OIFISCVARNT,
InfoObject: 0CPNOITEMS BW: Anzahl Vorgänge.
CPNOITEMS TYPE /BI0/OICPNOITEMS,
InfoObject: 0CO_AREA Kostenrechnungskreis.
CO_AREA TYPE /BI0/OICO_AREA,
InfoObject: 0DOC_ITEM BW: Belegpositionsnummer.
DOC_ITEM TYPE /BI0/OIDOC_ITEM,
InfoObject: 0VALUE_LC Betrag in Hauswährung.
VALUE_LC TYPE /BI0/OIVALUE_LC,
InfoObject: 0COORDER Auftragsnummer.
COORDER TYPE /BI0/OICOORDER,
InfoObject: 0QUANT_B Menge in Basismengeneinheiten.
QUANT_B TYPE /BI0/OIQUANT_B,
InfoObject: 0MOVE_PLANT Empfangendes/Abgebendes Werk.
MOVE_PLANT TYPE /BI0/OIMOVE_PLANT,
InfoObject: 0RECORDMODE BW Deltaverfahren: Update Modus.
RECORDMODE TYPE RODMUPDMOD,
InfoObject: 0RT_RMAPIDA RMA Inventurdatum.
RT_RMAPIDA TYPE /BI0/OIRT_RMAPIDA,
InfoObject: 0BWCOUNTER Zusätzliches Schlüsselfeld Umbewertungsbel
*egsatz.
BWCOUNTER TYPE /BI0/OIBWCOUNTER,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0RT_MOVINV Bewegungsart ist Inventur.
RT_MOVINV TYPE /BI0/OIRT_MOVINV,
InfoObject: 0RT_MOVADJ Bewegungsart ist Bestandskorrektur.
RT_MOVADJ TYPE /BI0/OIRT_MOVADJ,
InfoObject: 0RSL_STMAT Strukturierter Artikel.
RSL_STMAT TYPE /BI0/OIRSL_STMAT,
InfoObject: 0RT_MOVRET Bewegungsart ist Retoure.
RT_MOVRET TYPE /BI0/OIRT_MOVRET,
InfoObject: 0RSL_STAUTO Automatisch ergänzte Komponente.
RSL_STAUTO TYPE /BI0/OIRSL_STAUTO,
InfoObject: 0RT_MOVTRAN Bewegungsart ist Umlagerung.
RT_MOVTRAN TYPE /BI0/OIRT_MOVTRAN,
InfoObject: 0RT_MATPOST Umbuchung Artikel an Artikel.
RT_MATPOST TYPE /BI0/OIRT_MATPOST,
InfoObject: 0RT_SASTSV Umsatzanteil am Set Verkaufswert in Hauswä
*hrung.
RT_SASTSV TYPE /BI0/OIRT_SASTSV,
InfoObject: 0RT_SASTST Umsatzanteil am Set Verkaufswert mit Steue
*r in Hauswährung.
RT_SASTST TYPE /BI0/OIRT_SASTST,
Field: RECORD.
RECORD TYPE RSARECORD, END OF tys_SC_1_full.
TYPES:
tyt_SC_1_full TYPE STANDARD TABLE OF tys_SC_1_full
WITH NON-UNIQUE DEFAULT KEY.
TYPES:
BEGIN OF tys_TG_1_full,
InfoObject: 0CHNGID Änderungslauf ID.
CHNGID TYPE /BI0/OICHNGID,
InfoObject: 0RECORDTP Satztyp.
RECORDTP TYPE /BI0/OIRECORDTP,
InfoObject: 0REQUID Request ID.
REQUID TYPE /BI0/OIREQUID,
InfoObject: 0CALDAY Kalendertag.
CALDAY TYPE /BI0/OICALDAY,
InfoObject: 0CALMONTH Kalenderjahr / Monat.
CALMONTH TYPE /BI0/OICALMONTH,
InfoObject: 0CALWEEK Kalenderjahr / Woche.
CALWEEK TYPE /BI0/OICALWEEK,
InfoObject: 0CALYEAR Kalenderjahr.
CALYEAR TYPE /BI0/OICALYEAR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0PLANT Werk.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0STOR_LOC Lagerort.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0BATCH Chargennummer.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0GN_VENDOR Lieferant.
GN_VENDOR TYPE /BI0/OIGN_VENDOR,
InfoObject: 0RECVS_VAL Zugangswert Bewerteter Bestand.
RECVS_VAL TYPE /BI0/OIRECVS_VAL,
InfoObject: 0ISSVS_VAL Abgangswert Bewerteter Bestand.
ISSVS_VAL TYPE /BI0/OIISSVS_VAL,
InfoObject: 0ISSBLOSTCK Abgangsmenge Gesperrter Bestand.
ISSBLOSTCK TYPE /BI0/OIISSBLOSTCK,
InfoObject: 0ISSCNSSTCK Abgangsmenge Konsignationsbestand.
ISSCNSSTCK TYPE /BI0/OIISSCNSSTCK,
InfoObject: 0ISSQMSTCK Abgangsmenge Qualitätsbestand.
ISSQMSTCK TYPE /BI0/OIISSQMSTCK,
InfoObject: 0ISSTRANSST Abgangsmenge Transitbestand.
ISSTRANSST TYPE /BI0/OIISSTRANSST,
InfoObject: 0RECBLOSTCK Zugangsmenge Gesperrter Bestand.
RECBLOSTCK TYPE /BI0/OIRECBLOSTCK,
InfoObject: 0RECCNSSTCK Zugangsmenge Konsignationsbestand.
RECCNSSTCK TYPE /BI0/OIRECCNSSTCK,
InfoObject: 0RECQMSTCK Zugangsmenge Qualitätsbestand.
RECQMSTCK TYPE /BI0/OIRECQMSTCK,
InfoObject: 0RECTRANSST Zugangsmenge Transitbestand.
RECTRANSST TYPE /BI0/OIRECTRANSST,
InfoObject: 0ISSSCRP Abgangsmenge Ausschuss.
ISSSCRP TYPE /BI0/OIISSSCRP,
InfoObject: 0ISSVALSCRP Abgangswert Ausschuss.
ISSVALSCRP TYPE /BI0/OIISSVALSCRP,
InfoObject: 0RECTOTSTCK Zugangsmenge Gesamt Bestand.
RECTOTSTCK TYPE /BI0/OIRECTOTSTCK,
InfoObject: 0ISSTOTSTCK Abgangsmenge Gesamtbestand.
ISSTOTSTCK TYPE /BI0/OIISSTOTSTCK,
InfoObject: 0ISSVALSTCK Abgangsmenge Bewerteter Bestand.
ISSVALSTCK TYPE /BI0/OIISSVALSTCK,
InfoObject: 0RECVALSTCK Zugangsmenge Bewerteter Bestand.
RECVALSTCK TYPE /BI0/OIRECVALSTCK,
InfoObject: 0VENCONCON Verbrauchswerte Lieferantenkonsignationsbe
*stand.
VENCONCON TYPE /BI0/OIVENCONCON,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
Field: RECORD Nummer des Datensatzes.
RECORD TYPE RSARECORD,
END OF tys_TG_1_full.
TYPES:
BEGIN OF tys_SC_1__RULE_9,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_9.
TYPES:
BEGIN OF tys_SC_1__RULE_10,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_10.
TYPES:
BEGIN OF tys_SC_1__RULE_11,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_11.
TYPES:
BEGIN OF tys_SC_1__RULE_12,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_12.
TYPES:
BEGIN OF tys_SC_1__RULE_13,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_13.
TYPES:
BEGIN OF tys_SC_1__RULE_15,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_15.
TYPES:
BEGIN OF tys_SC_1__RULE_19,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_19.
TYPES:
BEGIN OF tys_SC_1__RULE_20,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_20.
TYPES:
BEGIN OF tys_SC_1__RULE_21,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_21.
TYPES:
BEGIN OF tys_SC_1__RULE_22,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_22.
TYPES:
BEGIN OF tys_SC_1__RULE_25,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_25.
TYPES:
BEGIN OF tys_SC_1__RULE_31,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_31.
TYPES:
BEGIN OF tys_SC_1__RULE_37,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_37.
TYPES:
BEGIN OF tys_SC_1__RULE_38,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_38.
TYPES:
BEGIN OF tys_SC_1__RULE_39,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_39.
TYPES:
BEGIN OF tys_SC_1__RULE_40,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_40.
TYPES:
BEGIN OF tys_SC_1__RULE_41,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_41.
TYPES:
BEGIN OF tys_SC_1__RULE_42,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_42.
TYPES:
BEGIN OF tys_SC_1__RULE_43,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_43.
TYPES:
BEGIN OF tys_SC_1__RULE_51,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_51.
Additional types for start routine interface
TYPES:
data_package_structure type tys_SC_1_full.
Additional declaration for update rule interface
DATA:
MONITOR type standard table of rsmonitor WITH HEADER LINE,
MONITOR_RECNO type standard table of rsmonitors WITH HEADER LINE,
RECORD_NO LIKE SY-TABIX,
RECORD_ALL LIKE SY-TABIX,
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS.
global definitions from update rules
INCLUDE rsbctgn_top.
INCLUDE rsbctgn_update_rules.
FORM routine_9998
TABLES DATA_PACKAGE TYPE tyt_SC_1_full
CHANGING
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
see OSS note 571669
LOOP AT DATA_PACKAGE.
IF DATA_PACKAGE-stockcat EQ 'V' OR
DATA_PACKAGE-stocktype EQ 'V'.
DELETE DATA_PACKAGE.
ENDIF.
ENDLOOP.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_9998
FORM routine_0012
USING
COMM_STRUCTURE type tys_SC_1__RULE_9
CHANGING
RESULT TYPE tys_TG_1_full-ISSCNSSTCK
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods issue is considered
IF ( COMM_STRUCTURE-processkey EQ '100' "Other Issues
OR COMM_STRUCTURE-processkey EQ '101' "Returns / Vendor
OR COMM_STRUCTURE-processkey EQ '104' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '105' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '106' "Stock Adjustment Other
OR COMM_STRUCTURE-processkey EQ '110' ) "Issue from Stock Transfer
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only movements which are relevant for stock control
AND COMM_STRUCTURE-stockrelev EQ '1'
AND COMM_STRUCTURE-cpquabu <> 0.
only consignment stock is considered
CASE COMM_STRUCTURE-stockcat.
WHEN 'K'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
WHEN space.
IF COMM_STRUCTURE-stocktype CA 'KLM'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
ELSE.
RETURNCODE = 4.
ENDIF.
WHEN OTHERS.
RETURNCODE = 4.
ENDCASE.
ELSE.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 4.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0012
FORM routine_0014
USING
COMM_STRUCTURE type tys_SC_1__RULE_10
CHANGING
RESULT TYPE tys_TG_1_full-RECCNSSTCK
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods receipt is considered
IF ( COMM_STRUCTURE-processkey EQ '000' "Other Receipts
OR COMM_STRUCTURE-processkey EQ '001' "Goods Receipt / Vendor
OR COMM_STRUCTURE-processkey EQ '004' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '005' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '006' "Stock Adjustment Other
OR COMM_STRUCTURE-processkey EQ '010' ) "Receipt from Stock Transfer
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only movements which are relevant for stock control
AND COMM_STRUCTURE-stockrelev EQ '1'
AND COMM_STRUCTURE-cpquabu <> 0.
only consignment stock is considered
CASE COMM_STRUCTURE-stockcat.
WHEN 'K'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
WHEN space.
IF COMM_STRUCTURE-stocktype CA 'KLM'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
ELSE.
RETURNCODE = 4.
ENDIF.
WHEN OTHERS.
RETURNCODE = 4.
ENDCASE.
ELSE.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 4.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0014
FORM routine_0041
USING
COMM_STRUCTURE type tys_SC_1__RULE_11
CHANGING
RESULT TYPE tys_TG_1_full-GN_VENDOR
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
... determine consolidated key
IF COMM_STRUCTURE-stockcat EQ 'K'.
PERFORM gn_get_global_key TABLES MONITOR
USING COMM_STRUCTURE-gn_r3_ssy
g_c_bwbeoty_r3vendor
COMM_STRUCTURE-vendor
RECORD_NO
RECORD_ALL
CHANGING RESULT
ABORT.
if the returncode is not equal zero, the result will not be updated
Endif.
RETURNCODE = 0.
ENDFORM. "routine_0041
FORM routine_0010
USING
COMM_STRUCTURE type tys_SC_1__RULE_12
CHANGING
RESULT TYPE tys_TG_1_full-ISSVS_VAL
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods issue is considered
IF ( COMM_STRUCTURE-processkey EQ '100' "Other Issues
OR COMM_STRUCTURE-processkey EQ '101' "Returns / Vendor
OR COMM_STRUCTURE-processkey EQ '104' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '105' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '106 -
Activation error due to the missing objects in shadow instance.
Hello All,
We have problem with our NW701 -> NW730 upgrade. In phase ACT_UPG there is problem with activation of two tables ->
1EEDO519 "Table" "/BI0/PRSTT_EID" could not be activated
1EEDO519 "Table" "/BI0/PRSTT_OBJNM" could not be activated
The problem is that the data elements which are used in this tables were not mirrored into shadow instance. These 3 data elements are missing ->
/BI0/OIRSTT_FDATE
/BI0/OIRSTT_FTIME
/BI0/OIRSTT_SSYS
In the logfile CUSTEXP.IWY there is following error message ->
3 EUG166 Unknown message with "R3TR" "DTEL" "/BI0/OIRSTT_FDATE" "0RSTT_FDATE"
3 EUG166 Unknown message with "R3TR" "DTEL" "/BI0/OIRSTT_FTIME" "0RSTT_FTIME"
3 EUG166 Unknown message with "R3TR" "DTEL" "/BI0/OIRSTT_SSYS" "0RSTT_SSYS"
Worse is that in the log CUSTEXP.IWY we can see that 179 objects has the same error message and these objects do not exist in shadow instance.
When I try "where used" button on data element /BI0/OIRSTT_FTIME in SE11 I get the list of structures where it is used, for example structure /BIC/CE8OMIS_VS. This structure /BIC/CE8OMIS_VS exists in shadow instance and is active but the data element /BI0/OIRSTT_FTIME is missing! And if I check the consistency of the structure in SE11 I receive an error about missing data element.
I dont think this is ok, and there could be more objects which seems to be activated but if some of the data elements or domains etc... is missing there is a problem. I have opened OSS message for this but maybe someone from you have experience with such behavior and can help.
Thank you.
Regards,
JMHi Manish Patel,
I have received an answer from SAP :
I have confirmed with our BW-SYS-DB expert, actually the affected
objects ("*RSTT*") are part of the technical content. We deliver with
the technical content our interbal trace tool. Obviously part of the
trace tool is inconsistent in your system and as it was never used the
problem was not visible before the upgrade.
To proceed, please skip the errors ( the objects are absolute not
necessary for running BW ) and after the upgrade is finished please
activate the technical content. The missing objects must be created
by the activation.
So I have skipped the activation of these objects and I am continuing ... -
I am unable to print anything from an internet web page. I continually get "printer not activated, error code- 30" followed by "An unknown error occurred while printing". I can copy the material from the web page, place into a Word document and then print. This just started yesterday and I have no idea why. Would appreciate your advice!
See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page] -
When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.
What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages -
I am getting error Field name RT_CUSTPL of segment 1 exists multiple times
Hi,
While i was try to activate Datasource where i am getting the error Field name RT_CUSTPL of segment 1 exists multiple times
BIC/ZCSTCRTDT ( Position 23 ): External length specification will be ignored
Regards
KrishOne more error "Error when activating DataSource ZSTORE_TXT WEBSERVICE"
-
Activation error: Printer not activated, error code 20
I have had my officejet 4215 all-in-one printer well over a year and it has connected and printed whatever I wanted. Yesterday when I wanted to print an email it would not and the following box popped up: Activation error: Printer not activated, error code 20. Then the next box that popped up said: Printer Error An unknown error occurred while printing.
If I copy the email over to a Microsoft Windows page, then i can print it fine.
Any idea how to fix this so I can print email's like I used to?
ReyWhat operating system? What email program are you trying to print from?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
ACTIVATION Error during phase MAIN_SHDRUN/ACT_UPG
Hello Experts,
I am facing an activation error during upgrade o ECC 6.0 EHP 6 in shadow instance.
ERROR: Detected the following errors:
# F:\SUM\abap\log\SAPA702EPU.UAS: 3 EDT012XActivate table "PTRV_UTIL_VPFPS_VPFPA_P" 3 EDT402 Append structure "PTRV_VPFPS_VPFPA_P_APPEND" appended to table "PTRV_UTIL_VPFPS_VPFPA_P" 1EEDT963 Field "TIME_DURATION" in table "PTRV_UTIL_VPFPS_VPFPA_P" is specified twice. Please check 2WEDT135 Flag: 'Incorrect enhancement category' could not be updated 3 EDT013 Table "PTRV_UTIL_VPFPS_VPFPA_P" was not activated 1EEDO519X"Table" "PTRV_UTIL_VPFPS_VPFPA_P" could not be activated 3 EMC738XActivate view "V_T706S_EHP" 1EEMC560 Field "T706S"-"D2100" does not exist 1EEMC560 Field "T706S"-"EXCHANGE_DATE" does not exist 1EEMC560 Field "T706S"-"TRIP_BREAK_CNTRY" does not exist 3 EMC742 View "V_T706S_EHP" was not activated 1EEDO519 "View" "V_T706S_EHP" could not be activated
...skipped 13 more lines. Please see ACTUPG.html for more information.
SAPup_troubleticket.log
This trouble ticket was created by SAPup on 20140801092425
SAPup broke during phase ACT_UPG in module MAIN_SHDRUN / Shadow System Operations: SPDD and Activation
Error Message: Detected 5 errors summarized in 'ACTUPG.ELG'
Calling 'F:\SUM\abap\exe/tp' failed with return code 8, check F:\SUM\abap\log\SAPup.ECO for details
tp used shadow connect
ACTUPG.ELG:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in F:\SUM\abap\log\SAPA-10202INPOASBC.UAS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<NO ERROR LINES FOUND, BUT HIGHEST EXIT CODE WAS: "8">
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA702EPU.UAS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3 EDT012XActivate table "PTRV_UTIL_VPFPS_VPFPA_P"
3 EDT402 Append structure "PTRV_VPFPS_VPFPA_P_APPEND" appended to table "PTRV_UTIL_VPFPS_VPFPA_P"
1EEDT963 Field "TIME_DURATION" in table "PTRV_UTIL_VPFPS_VPFPA_P" is specified twice. Please check
2WEDT135 Flag: 'Incorrect enhancement category' could not be updated
3 EDT013 Table "PTRV_UTIL_VPFPS_VPFPA_P" was not activated
1EEDO519X"Table" "PTRV_UTIL_VPFPS_VPFPA_P" could not be activated
3 EMC738XActivate view "V_T706S_EHP"
1EEMC560 Field "T706S"-"D2100" does not exist
1EEMC560 Field "T706S"-"EXCHANGE_DATE" does not exist
1EEMC560 Field "T706S"-"TRIP_BREAK_CNTRY" does not exist
3 EMC742 View "V_T706S_EHP" was not activated
1EEDO519 "View" "V_T706S_EHP" could not be activated
3 EDT014XActivate dependent table "/MRSS/T_CUP_OBJECT"
1EEDT242 Field "FIELD_DESCRIPTIONS": Component type or domain used not active or does not exist
2WEDT183 Field "INSTANCE"-"/MRSS/IF_CUP_OBJECTS": Reference type used is not active
1EEDT005 Nametab for table "/MRSS/T_CUP_OBJECT" cannot be generated
3 EDT015 Dependent table "/MRSS/T_CUP_OBJECT" was not activated
1EEDO519 "Table" "/MRSS/T_CUP_OBJECT" could not be activated
3 EDT014XActivate dependent table "T706S"
1EEDT963 Field "TRIP_BREAK" in table "T706S" is specified twice. Please check
3 EDT015 Dependent table "T706S" was not activated
1EEDO519 "Table" "T706S" could not be activated
1 ETP111 exit code : "8"
SAPA702EPU.SID
ent tables)
2WEDO549 "View" "V_TWGVALE" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWH01" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWICSCMF" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWICSCMF0100" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWICSCMF0200" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWICSCMF0250" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWICSCMF0260" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWICSCMF501" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWICSCMF600" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWICSCMF8003" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWLOF" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWMWQ" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWPC_COLHEAD" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWPC_COLHEAD_C" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWRF2" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWSD" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWTFMA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TWZLA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TXW_AD01D" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZB0W" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZB6D" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZBABG" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZBABGZB" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZD0B" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZD0BI" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZD0BW" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZE02" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZE03D" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZONE_M" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZPAB3" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZT01" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZT01D" was activated (warning for the dependent tables)
2WEDO549 "View" "V_TZV04" was activated (warning for the dependent tables)
2WEDO549 "View" "V_UEBER" was activated (warning for the dependent tables)
2WEDO549 "View" "V_USCOMP" was activated (warning for the dependent tables)
2WEDO549 "View" "V_USCOMPA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_USR_NAME" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VGNVA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VGNWA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIGWVOBW" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIGWVOBW_BUK" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIGWVOBW_GE" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIGWVOBW_GFL" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIGWVOBW_GR" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIGWVOBW_GRA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIGWVOBW_WE" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIOB01" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIOB02" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VIOB03" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VITXT" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VLBLTD" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VLTD" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VTDST" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VTSPLS" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WBEW" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WCUSDOC_RELA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WITH_CTNCOT005" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WLFBA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WLFBB" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WLFKC" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WLFRA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WLFRB" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WLFZA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WLFZB" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WLFZUC10" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WRBLA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WRGLA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WRGLB" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WRLBA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_WRSZ" was activated (warning for the dependent tables)
2WEDO549 "View" "WB2_V_VBRK_WBGT" was activated (warning for the dependent tables)
2WEDO549 "View" "WB2_V_WBRK_WBRP" was activated (warning for the dependent tables)
2WEDO549 "View" "WB2_V_WBRK_WBRP2" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVAP" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVHE" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVITX" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVJ" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVM1" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVN1" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVO1" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVO2" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVO3" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVO4" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVO5" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVO6" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVO7" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVO8" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVO9" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVOA" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVOC" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVOD" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVODX" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVOE" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVOF" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVOI" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVP0" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVP1" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVP2" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVP3" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVP4" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVP5" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVP6" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVP7" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVP8" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVPN1" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVPU1" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVW" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVWA1" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVWA2" was activated (warning for the dependent tables)
2WEDO549 "View" "WCVZ1" was activated (warning for the dependent tables)
2WEDO549 "View" "YWM_VSNACH_LIKP" was activated (warning for the dependent tables)
2WEDO549 "View" "YWTY_V_DLR_BR" was activated (warning for the dependent tables)
2WEDO549 "View" "YWTY_V_DLR_PROOR" was activated (warning for the dependent tables)
2WEDO549 "View" "YWTY_V_EMGAR_DC" was activated (warning for the dependent tables)
2WEDO549 "View" "YWTY_V_USR_DISTR" was activated (warning for the dependent tables)
2WEDO549 "View" "YWTY_V_WORKBY" was activated (warning for the dependent tables)
2WEDO549 "View" "ZZLIB_V_HKTK" was activated (warning for the dependent tables)
2WEDO549 "View" "ZZLIB_V_LIFNR_C" was activated (warning for the dependent tables)
1 ED0301X*************************************************************************
1 ED0306 "Final log"
1 ED0322 End phase "006" ***********************************************************
1 ED0320XStart phase "007" **********************************************************
1 ED0306 "Statistics on Activated and Deleted Objects"
1 ED0301 *************************************************************************
1 EDO601XNumber of objects to be activated............: "35325"
1 EDO605 Objects not activated........................: "4"
1 EDO606 Activated objects with errors in dependencies: "4"
1 EDO604 Objects activated with warning...............: "5531"
1 EDO603 Successfully activated objects...............: "29786"
1 EDO602 Number of objects to be deleted..............: "128"
1 EDO608 Objects not successfully deleted.............: "0"
1 EDO607 Successfully deleted objects.................: "128"
1 EDO609 Tables/views with DROP/CREATE................: "0"
1 EDO610 No. of them marked for DROP/CREATE: "0"
1 EDO611 Not marked for DROP/CREATE: "0"
1 EDO620 Number of nametabs to be deleted.............: "0"
1 EDO622 Successfully deleted nametabs................: "0"
1 EDO621 Nametabs that were not successfully deleted..: "0"
1 ED0301X*************************************************************************
1 ED0306 "Statistics on Activated and Deleted Objects"
1 ED0322 End phase "007" ***********************************************************
1 ED0302X=========================================================================
1 ED0314 Mass Activation
1 ED0302 =========================================================================
1 ED0327 Process..................: "defnsv1466_14_59636"
1 ED0319 Return code..............: "8"
1 ED0313 Phase 001..................: 00:00:13 (Take Over Switch-Dependent Objects)
1 ED0314 Phase 002..................: < 1 sec. (Deletion of objects: 1th call)
1 ED0314 Phase 003..................: 00:00:47 (Berechnung der Abhängigen:)
1 ED0313 Phase 004..................: 00:15:00 (Object Activation)
1 ED0314 Phase 005..................: < 1 sec. (Puffer Sync für Abhängige refTo ...)
1 ED0314 Phase 006..................: < 1 sec. (Final log)
1 ED0314 Phase 007..................: < 1 sec. (Statistics on Activated and ...)
1 ED0309 Program runtime..........: "00:16:01"
1 ED0305 Date, time...............: "01.08.2014", "09:23:55"
1 ED0318 Program end==============================================================
1 ETP155 ACTIVATION OF DD-OBJECTS
1 ETP110 end date and time : "20140801092355"
1 ETP111 exit code : "8"
1 ETP199 ######################################
4 EPU202XEND OF SECTION BEING ANALYZED END OF ACT_UPG =====================================================
Please suggest.
Regards,
AlokHi Divyanshu,
thanks for your prompt reply,
As per the error occurred, PTRV_UTIL_VPFPS_VPFPA_P is the table but when I check in SE16 its saying PTRV_UTIL_VPFPS_VPFPA_P not a table its a STRUCTURE
In SE11 its saying "PTRV_UTIL_VPFPS_VPFPA_ "does not exist.Check name.
Here it is not taking full name of table "PTRV_UTIL_VPFPS_VPFPA_P".
Pl suggest.
BR,
Alok -
"ON VALUE REQUEST FOR" Activation Error!
Hi All,
Am using a field on my Selection Screen:
SELECT-OPTIONS s_kh_ch FOR p9240-subty NO INTERVALS.
When, am calling an event, to populate the search help for this field:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_kh_ch-low.
PERFORM f_call_f4_help TABLES git_subty_9240 USING 'SUBTY' 'P9240-SUBTY'.
It is giving an activation error!
"ON VALUE REQUEST FOR" should be followed by <parameter> or <select-option>-LOW/<select-option>-HIGH.
BUT, For your Information, the same On Value Request For event works well, when i define the field as PARAMETER!
Why is this error being thrown ? Anyone faced this kind of activation error?
Kindly Help...
Thanks in advance.
Rgds,
Sundar.HI,
try this
data: g type anla-anln1.
data: itab like anla occurs 0 with HEADER LINE.
select-options s for g.
at selection-SCREEN on VALUE-REQUEST FOR s-low.
perform routine tables itab
using s-low.
*& Form routine
text
-->P_ITAB text
-->P_S_LOW text
FORM routine TABLES P_ITAB STRUCTURE anla
USING P_S_LOW.
ENDFORM. " routine
reward points if helpful,
regards,
venkatesh -
ADS - SFP Forms Activation Error
Dear @all, I have an activation Error in SFP for Z FORMS. ADS is configured and all configuration checks working fine:
checked: Hinweis 944221 - Fehleranalyse bei Problemen in der Formularprozessierung
checked with repords:
FP_CHECK_DESTINATION_SERVICE
FP_TEST_IA_01
FP_PDF_TEST_00
FP_TEST_00the exeption is:
#1.5^H#0015C5FEC1F3005000000EC1000060AE000483A5CC36C696#1270648025826#com.adobe.ads.request.ADSRequest#com.adobe/AdobeDocumentServices#com.adobe.ads.request.ADSRequest#SAPSUPPORT2#22098#SAP J2EE Engine JTA
Transaction : [12465520176ffffff93]
#icosap14.implico.de_W40_19162450#ADSUSER#0ad7d10a424c11dfa5100015c5fec1f3#SAPEngine_Application_Thread[impl:3]
_33##0#0#Error#1#/System/Server#Plain###Processing exception during
a "CalculateFieldHashes" operation.
Request start time: Wed Apr 07 15:47:04 CEST 2010
com.adobe.ProcessingException: com.adobe.ProcessingException: Class not
found exception while loading class SAPForm,
classpath: /usr/sap/W40/DVEBMGS01/exe/jstartup.jar:/usr/sap/W40/DVEBMGS01/exe/jvmx.jar:./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
Exception Stack Trace:
com.adobe.ProcessingException: com.adobe.ProcessingException: Class not
found exception while loading class SAPForm,
classpath: /usr/sap/W40/DVEBMGS01/exe/jstartup.jar:/usr/sap/W40/DVEBMGS01/exe/jvmx.jar:./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
at com.adobe.ads.request.ADSRequest.processOperations(Unknown
Source)
at com.adobe.ads.request.ADSRequest.process(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown
Source)
at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke
(NativeMethodAccessorImpl.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke
(NativeMethodAccessorImpl.java:58)
at sun.reflect.DelegatingMethodAccessorImpl.invoke
(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at
com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at
com.sap.engine.services.webservices.runtime.RuntimeProcessor.process
(RuntimeProcessor.java:157)
at
com.sap.engine.services.webservices.runtime.RuntimeProcessor.process
(RuntimeProcessor.java:79)
at
com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
at SoapServlet.doPost(SoapServlet.java:51)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet
(HttpHandlerImpl.java:401)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:386)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:364)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.handle
(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle
(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request
(Processor.java:175)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run
(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
at java.security.AccessController.doPrivileged
(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:176)
Caused by: com.adobe.ProcessingException: Class not found exception
while loading class SAPForm,
classpath: /usr/sap/W40/DVEBMGS01/exe/jstartup.jar:/usr/sap/W40/DVEBMGS01/exe/jvmx.jar:./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
at com.adobe.ads.operation.CalculateFieldHashes.execute(Unknown
Source)
at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
... 31 more
Caused by: java.lang.ClassNotFoundException:
com.adobe.service.sap.licensing.SAPForm^M
Found in negative cache^M
Loader Info -
^M
ClassLoader name: [ejbGencom.adobe/AdobeDocumentServices]^M
Parent loader name: [com.adobe/AdobeDocumentServices]^M
References:^M
service:ejb^M
common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:signature_lib;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore^M
interface:resourcecontext_api^M
interface:resourceset_api^M
interface:transactionext^M
interface:security^M
interface:cross^M
library:opensql^M -
DDIC_ ACTIVATION error with SAPKB70006 on ECC6/NW7
Hi BASIS GURUS,
I am doing support package SAPKB70006 to SAPKB70012 in ecc 6.0 IDES system. When i check the import logs queue. It showing these below tables are not activated. Then i try to activated in se14,se11,se38. But there it showing cannot be processed via db utility.
Table YCRM01_S_BUPM could not be activated
Table YTEL01_S_BUPM could not be activated
Table ZICMAG_S_BUPM could not be activated.
It is in ddic_activation stage. Transport tool is o.k..
Reason for error: TP_STEP_FAILURE, Return code: 0008
Pls do need full.
Points guaranteed for immediate reply.I have enough space , problem is with activation of four tables, part of the error message is as below:-
Table YCRM01_S_BUPM could not be activated
Table YTEL01_S_BUPM could not be activated
Table ZICMAG_S_BUPM could not be activated
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬----
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬----¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Field RATE: Component type or domain used not active or does not exist
Nametab for table YTEL01_S_BUPM cannot be generated
Dependent table YTEL01_S_BUPM was not activated
Activate dependent table YTEL05_S_BUPM
Activation of dependent table YTEL05_S_BUPM successful
Activate dependent table ZICMAG_S_BUPM
Field RATE: Component type or domain used not active or does not exist
Nametab for table ZICMAG_S_BUPM cannot be generated
Dependent table ZICMAG_S_BUPM was not activated
Activate dependent table YTEL01_S_BUPM
Field RATE: Component type or domain used not active or does not exist
Nametab for table YTEL01_S_BUPM cannot be generated
Dependent table YTEL01_S_BUPM was not activated
Activate dependent table YTEL05_S_BUPM
Activation of dependent table YTEL05_S_BUPM successful
Activate dependent table ZICMAG_S_BUPM
Field RATE: Component type or domain used not active or does not exist
Nametab for table ZICMAG_S_BUPM cannot be generated
Dependent table ZICMAG_S_BUPM was not activated
Following objects not activated/deleted or activated/deleted w. warning:
Data Element AD_TITLE1 was activated (error in the dependencies)
Table YCRM01_S_BUPM could not be activated
Table YTEL01_S_BUPM could not be activated
Table ZICMAG_S_BUPM could not be activated -
Iphone 4 activation error oxe8000004
iphone 4 imei ************* after update to version 7.1.2 activation error oxe8000004 showing every time in iTunes
<Edited by Host>Try the troubleshooting on this page : iOS: Unknown error containing '0xE' when connecting to a Windows PC
(As these are user-to-user forums, you're not talking to iTunes Support nor Apple, I've asked the hosts to remove the IMEI number from your post). -
I am getting an activation error when trying to sign in to FAceTime
I am getting an activation error when trying to sign in to FAceTime
me too after upgrading into lion..
Maybe you are looking for
-
Sharepoint Online Bug: Document Set does not synchronize empty fields
If in the properties of document set the general field is empty, it will not be synchronized with internal files that has this general field. Ie, all files can have own values for the general field. If the value in document set (in properties) is not
-
Mac Mini late 2012 running slowly
Mac Mini (Late 2012) is running slowly. How can I speed it up?
-
Hi, In my system we are creating ERS invoices using the MRRL transaction , but this is taking too long . We are using MRRL to settle shipment cost documents , the approx. number of settlement sheets generated every day in our business scenario i
-
Making a 100mm x 150mm postcard
Hi folks I have been struggling with this for three hours now and wonder if anyone can please help me? I have designed a postcard which MUST be exactly 100mm x 150mm. This is being professionally printed mail-order in a batch of 60, so I don't get an
-
I am having trouble with my adobe reader
I am having trouble with my adobe reader. I am not able to access my report I am supposed to be working on that is time sensitive. I have had tech support for 2 days trying to trouble shoot. They have done all they can do and told me to call Adobe. I