0PROJECT_ATTR datasource throws short dump in bw

0PROJECT_ATTR datasource throws short dump in BW. On checking the same at source system level in R3 using RSA3 transaction, the error has been cornered that "Project I0640-03/0001 does not exist".
Now i would like to know the related transaction codes to even more corner the problem.
Can anyone help me out in this.
Regards
Baskar
Message was edited by: Baskar Rajagopalan

For information, I dont have authorisation to use SE93.
AS of now the problem has already been cornered that the issue is in R3 extraction only.
Message was edited by: Baskar Rajagopalan

Similar Messages

System Throws short dump while executing data source 2LIS_11_VASCL in RSA3.

Hello Experts,
I got short dump while executing data source 2LIS_11_VASCL in RSA3.
The details are as follow.
When importing object "MC11VA0SCL_TAB", the structure did not match the
structure of the target object. The error occurred in component
no. 567.
This may be due to one of the following reasons:
- the structure is actually different (the next field has, for
example, a different data type) or
- the same sequence of components were exported and imported,
but the fields were from other include units.
I have checked source and target fields and those are of same length and data type.
Could you please give some points why this short dump occurs.
Thanks
Konda Reddy

Hi,
This error is not between BI and R/3. It is within R/3. You may have setup data and then modified the datasource.
Delete setup data, generate your datasource again. Setup data and try again.
If you are on a live system with data setup after a downtime and you do not want to delete it, then bring your datasource to the original state when you setup data and pull data.
Cheers....

RSA1 - Datasources ASSERTION_FAILED short dump

Hello,
We are getting a short dump (ASSERTION_FAILED) when clicking on Datasources tab in RSA1 -> Modeling. This was working fine till yesterday afternoon. The last action I performed was to activate all transfer structures in My self source system using RS_TRANSU_ACTIVATE_ALL. I searched on service marketplace but couldn't find any note relevant to our error.
Everything else works fine. Please advise.
We are on BI SP14.
This is the log from st22.
Short text
    The ASSERT condition was violated.
What happened?
    In the running application program, the ASSERT statement recognized a
    situation that should not have occurred.
    The runtime error was triggered for one of these reasons:
    - For the checkpoint group specified with the ASSERT statement, the
      activation mode is set to "abort".
    - Via a system variant, the activation mode is globally set to "abort
      for checkpoint groups in this system.
    - The activation mode is set to "abort" on program level.
    - The ASSERT statement is not assigned to any checkpoint group.
Error analysis
    The following checkpoint group was used: "No checkpoint group specified"
    If in the ASSERT statement the addition FIELDS was used, you can find
    the content of the first 8 specified fields in the following overview:
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "ASSERTION_FAILED" " "
    "CL_RSAWBN_TREE_VIEW===========CP" or "CL_RSAWBN_TREE_VIEW===========CM00K"
    "EXPAND_NODE"
Best Regards
RT
null

Hello Voodi,
998730 talks about the short dump when changing/activating transformations.
We got the short dump when trying to get into Datasources tab. Though we are on BI, as i mentioned earlier the last action i performed was to activate transfer structures (For 3.x statistical datasources).
Still, I checked the table contents as mentioned in the note. It was not of much help. Any other thoughts?
Thanks.
Message was edited by:
        SAPBI IP

APD is throwing short dump

Hi ,
When I try to check /execute an APD it is raising a short dump with the following message. It is happening with all the customer APD's in the system. Is there any configuration needs to setup to avoid the shortdumps.
Here are the details of error message.
"Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
The main program was "RSAN_PR_DSGN_MAIN_TLOGO ".
In the source code you have the termination point in line 82
of the (Include) program "LRRMSU13". "
Regards,
Ramesh

Hello,
On short dump (check ST22 transaction), will probably see the following:
SY-MSGID R7
SY-MSGNO 057
SY-MSGV1 <INFOOBJECT>
SY-MSGV2 A
So please, follow the instructions below:
1. If the infoobject is active version exists. reactivate it again.
2. Please check note 1032937 APD: Partitioning with compound characteristic
This should help for your problem.
Thanks
Edward John

Tranformation activation throws short dump

Hi all,
I am on SP9 earlier when assinging formulas in transformations i used to get "ASSERTION_FAILED" error. I searched for oss note and installed the following notes (along with there prequisites) in the below order
971020
1008381
1011638.
Now on activation i get a syntax error.
Runtime Errors SYNTAX_ERROR
Date and Time 01/09/2007 13:47:19
Short text
Syntax error in program "CL_RSTRAN_GEN=================CP ".
 What happened?
Error in the ABAP Application Program
The current ABAP program "CL_RSTRAN_TRFN================CP" had to be terminated because it has come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
 "CL_RSTRAN_GEN=================CP " in include
 "CL_RSTRAN_GEN=================CM00T " in
 line 54:
 "Field "I_NO_FREE" is unknown. It is neither in one of the specified ta"
 "bles nor defined by a "DATA" statement. "DATA" statement. "DATA" state"
 "ment."
The include has been created and last changed by:
 Created by: "BSHKSC "
 Last changed by: "SAP "

Hi Everyone,
We are on support package 9. I had the same assertion failed issues during imports. There were three key notes I wanted to implement, 1008381, 1011638, and 980549. These triggered the need for the rest to be implemented as well. Despite all those notes, we still have the short dump for the the syntax error with "I_NO_FREE" for CL_RSTRAN_GEN. I think there may be one or two other side effects as well since we are seeing other short dumps as well.
Thanks everyone. Craig
=========NOTES IMPLEMENTED===========
0000965972 Time-dependent master data - no data is read
0000976162 Currency trans/unit conversion: Target currency/unit initial
0000977225 Query on remote char terminates with ASSIGN_TYPE_CONFLICT
0000977926 Error BRAIN 070 occurs when filling a unit DataStore
0000979607 Runtime attribute: For example, source system is unavailable
0000980549 Endless D0/WHILE with inconsistent metadata
0000981806 RSUOM 065: No quantity conversion possible
0000983478 Request terminates with CX_SY_CONVERSION_ERROR
0000991119 RSM2 720 - Record (0) or segment (0001) unknown
0000995479 Breakpoints in der Simulation der Transformation
0001007327 RSTRAN 302 Exception .. aufgetreten DatenSatz geskipped
0001007765 Syntaxfehler bei Aktivierung einer Transformation
0001008381 Syntax error although the formula or routine is correct
and...
0001011638, 0000930495, 0000965507, 0000968517, 0000973258, 0000984890,
0000986199

Queries on infoset throwing short dump

hello all,
We have some queries based on infoset. These queries are throwing dump
Dump info
Category               ABAP Programming Error
Runtime Errors         GETWA_NOT_ASSIGNED
ABAP Program           SAPLRSQ_ISET_RUNTIME
Application Component BW-BEX
i found following
Infoset status - active.
Queries status - active
Queries executing till Selection screen
Infoset - data loaded
Pls help to fix this issue
Thanks

Hi,
Run your Query in RSRT in debug mode( Select SQL Query ). Try to analyze where it's getting failed. You can even analyze the dump in ST22.
Check the definition of your Infoset joins.
Regards,
Suman

ABAP Program Short Dump in BW

I have created a dynamic program which would read any table name as input parameter and print the contents. Its working if I use a small table(3 fields) and the same program is throwing short dump if pass a big table.
Shortdump
"SAPSQL_SELECT_TAB_TOO_SMALL" C
"ZBW_DYNAMIC_ITAB1" or "ZBW_DYNAMIC_ITAB1"
"START-OF-SELECTION"
Error in the line below
 61
 62 * Select Data from table.
>>>>> select * into table <dyn_table>
 64 from (p_table).
 65
Program
*& Report ZBW_DYNAMIC_ITAB1
REPORT ZBW_DYNAMIC_ITAB1.
type-pools: slis.
field-symbols: <dyn_table> type standard table,
 <dyn_wa>,
 <dyn_field>.
data: alv_fldcat type slis_t_fieldcat_alv,
 it_fldcat type lvc_t_fcat.
type-pools : abap.
data : it_details type abap_compdescr_tab,
 wa_details type abap_compdescr.
data : ref_descr type ref to cl_abap_structdescr.
data: new_table type ref to data,
 new_line type ref to data,
 wa_it_fldcat type lvc_s_fcat.
selection-screen begin of block b1 with frame title text .
parameters: p_table(30) type c.
selection-screen end of block b1.
Get the structure of the table.
ref_descr ?= cl_abap_typedescr=>describe_by_name( p_table ).
it_details[] = ref_descr->components[].
loop at it_details into wa_details.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = wa_details-name .
wa_it_fldcat-datatype = wa_details-type_kind.
wa_it_fldcat-intlen = wa_details-length.
wa_it_fldcat-decimals = wa_details-decimals.
append wa_it_fldcat to it_fldcat .
endloop.
Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
 exporting
 it_fieldcatalog = it_fldcat
 importing
 ep_table = new_table.
assign new_table->* to <dyn_table>.
Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
Select Data from table.
select * from (p_table) into table <dyn_table>
Write out data from table.
loop at <dyn_table> into <dyn_wa>.
do.
 assign component sy-index of structure <dyn_wa> to <dyn_field>.
 if sy-subrc <> 0.
 exit.
 endif.
 if sy-index = 1.
 write:/ <dyn_field>.
 else.
 write: <dyn_field>.
 endif.
enddo.
endloop.

Hi,
The dynamic table that is generated is not converting the exact output length in case of packed numbers.
Foe eg : If there is an packed field of length 7 , the dynamic table is converting it to Char 7 , but the actual output length of Pack 7 is 15.Hence it is giving short dump saying that Internal Table length is not sufficient.
Probably it might have worked for smaller tables for you because you might not have used Packed field in there.
Regards,
Vijay.

Short dump because of start routine.

Hi ,
I have a start routine to delete the certain records of Source package based on some condition .
My code is supposed to delete the source package when the 0DOC_CATEG ( Documant category )
is equal to 'B' or 'G'.Below is my code :
 LOOP AT SOURCE_PACKAGE into <SOURCE_FIELDS> .
 *IF <SOURCE_FIELDS>-DOC_CATEG EQ 'B'
 *OR <SOURCE_FIELDS>-DOC_CATEG EQ 'G'.
 DELETE SOURCE_PACKAGE from <SOURCE_FIELDS> .
 ENDIF.
 ENDLOOP.
There is no synatx error but at the runtime when executing DTP, it throws short dump.
Could somebody tell me what is the issue and if there is any alternate way of code .
Thanks,
Vels

Hi siggi,
The short dump is as follows:
Runtime Errors GETWA_NOT_ASSIGNED
Error analysis
 You attempted to access an unassigned field symbol
 (data segment 32774).
 This error may occur if
 - You address a typed field symbol before it has been set with
 ASSIGN
 - You address a field symbol that pointed to the line of an
 internal table that was deleted
 - You address a field symbol that was previously reset using
 UNASSIGN or that pointed to a local field that no
 longer exists
 - You address a global function interface, although the
 respective function module is not active - that is, is
 not in the list of active calls. The list of active calls
 can be taken from this short dump.

Transformations short dump

Hi All,
While saving or activating infocube transformations in BI development system getting abap short dump.
Short dump:
Runtime Errors         ASSERTION_FAILED
Date and Time          04.08.2009 12:35:44
Short dump has not been completely stored (too big)
Short text
     The ASSERT condition was violated.
What happened?
     In the running application program, the ASSERT statement recognized a
     situation that should not have occurred.
     The runtime error was triggered for one of these reasons:
     - For the checkpoint group specified with the ASSERT statement, the
       activation mode is set to "abort".
     - Via a system variant, the activation mode is globally set to "abort"
       for checkpoint groups in this system.
     - The activation mode is set to "abort" on program level.
     - The ASSERT statement is not assigned to any checkpoint group.
Error analysis
     The following checkpoint group was used: "No checkpoint group specified"
     If in the ASSERT statement the addition FIELDS was used, you can find
     the content of the first 8 specified fields in the following overview:
     " (not used) "
     " (not used) "
     " (not used) "
     " (not used) "
     " (not used) "
     " (not used) "
Trigger Location of Runtime Error
    Program                                 CL_RSTRAN_GEN_STEPGRP=========CP
    Include                                 CL_RSTRAN_GEN_STEPGRP=========CM00O
    Row                                     19
    Module type                             (METHOD)
    Module Name                             OPEN_IF
Source Code Extract
Line SourceCde
    1 METHOD open_if.
    2
    3   DATA:
    4     ls_step_gen TYPE ty_s_gen_param_step.
    5
    6   READ TABLE o_t_step_gen INTO ls_step_gen
    7     WITH TABLE KEY r_step_ = i_r_step_.
    8   ASSERT sy-subrc = 0.
    9   IF ls_step_gen-r_step_exe IS BOUND.
   10     EXIT.
   11   ENDIF.
   12
   13   IF o_if = if_rstran_gen_root=>c_s_status-open.
   14     r_true = rs_c_false.
   15   ELSEIF o_if = space.
   16     r_true = rs_c_true.
   17     o_if = if_rstran_gen_root=>c_s_status-open.
   18   ELSE.
>>>>>     ASSERT 1 = 2. "Invalid call
   20   ENDIF.
   21
   22 ENDMETHOD.
Can anybody tell me why it is throwing short dump in this case.
Suggest me necessary actions to resolve this issue.
Thanks,

Hi Shiva,
Let me explain my problem.
I have one infocube, two transformations. In the infocube I have added few master data objects directly into the corresponding dimensions and mapped to read from master data with current date.
Now I am changing Current date to End date in the transformations. After changing Current date to End date from Calendar Month or Calendar Day activating the transformations. While activating the transformations getting short dump.
Here I am using time dependent master data.
Thanks

Short Dump while checking DataSource contents in R3 (Transaction RSA3)

Hello all,
I am having trouble with a DataSource (2LIS_11_VAITM) in the R3 Source System (IDES 6.0). When I try to view the contents of this DataSource through Transaction RSA3, I get the following Short Dump Error.....
Could someone pls help me with this.
Thanks,
SD
============================================================================
Runtime Errors         CONNE_IMPORT_WRONG_STRUCTURE
Except.                CX_SY_IMPORT_MISMATCH_ERROR
Date and Time          18.03.2009 09:56:23
Short text
     Error when importing object "MC11VA0ITM_TAB".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLMCEX" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
      not caught in
     procedure "MCEX_BW_LO_API" "(FUNCTION)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     When attempting to import data, the
     structure of the complex object "MC11VA0ITM_TAB" was not compatible with the
     target object. The error occurred with component no. 31.
Missing RAISING Clause in Interface
     Program                                 SAPLMCEX
     Include                                 LMCEXU06
     Row                                     1
     Module type                             (FUNCTION)
     Module Name                             MCEX_BW_LO_API
Trigger Location of Exception
     Program                                 SAPLMCEX
     Include                                 LMCEXU06
     Row                                     263
     Module type                             (FUNCTION)
     Module Name                             MCEX_BW_LO_API

Hi SD,
The 11_Vaitm is a LO datasource, before checking its data setup tables need to be filled for it.
For filling the setup tables, first you have to delete the existing setup table data and ensure all the delta queues are empty.
Delete the setup tables: Go to TCODE LBWG and in the application give 11 and execute.
Delete all entries in Delta Queue, TCODE RSA7 for application 11.
Delete the entries in logistic queue: Check in TCODE SMQ1, if there are any entries for application .
Refill the setup tables: SBIW -> Settings for application specific datasources -> Logistics -> anaging extract strucutre -> Initilization -> Filling the setup table ->Application specific setup of data -> SD-Sales order perform setup.
Then try RSA3. Hope it helps.
Regards,
Pankaj

Short dump GETWA_NOT_ASSIGNED while transporting Datasource in BI 7.0

Hi Friends,
I am getting an error, while trying to transport Datasource into quality system. The Transport request log says that "Program terminated (job: RDDEXECL, no.: 11372100)"
If I check the log in SM37 of target system it gives following steps
29.06.2007 11:37:21 Job started
29.06.2007 11:37:21 Step 001 started (program RDDEXECL, variant , user ID DDIC)
29.06.2007 11:37:21 All DB buffers of application server bdhp4488 were synchronized
29.06.2007 11:37:30 SQL: 29.06.2007 11:37:30 DDIC
29.06.2007 11:37:30 CREATE UNIQUE INDEX "/BIC/B0000566001~0" ON
29.06.2007 11:37:30 "/BIC/B0000566001" ("REQUEST", "DATAPAKID",
29.06.2007 11:37:30 "PARTNO", "RECORD") PCTFREE 10 LOCAL INITRANS 002
29.06.2007 11:37:30 TABLESPACE PSAPSR3 STORAGE (INITIAL
29.06.2007 11:37:30 0000000016 K NEXT 0000000160 K MINEXTENTS
29.06.2007 11:37:30 0000000001
If I see the short dump in ST22 in target system (quality) The I get error
"Runtime Errors GETWA_NOT_ASSIGNED"
Could somebody help me in resolving this?
Thanks and regards,
Balaraj

Thanks Edwin,
My issue is still not resolved.
Now the error that I am getting while transporting the Transformation is
Program terminated (job: RDDEXECL, no.: 12091300)
The SM37 job log says that
"Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server bdhp4488 were synchronized
ABAP/4 processor: GETWA_NOT_ASSIGNED
Job cancelled"
When i see the dump in ST22. It says that it could not find entry in one of the tables
" READ TABLE p_t_mapping ASSIGNING <fs_map>
 WITH KEY target_stepid = 0
 targetsegid = <fs_posit>-rulesegid
 targetposit = <fs_posit>-ruleposit
 targetid = 0.
Sy-subrc <> 0 for this read.
Could you please advise?
Thanks and regards,
Balaraj

Short dump error when extracting from one of the datasource in R/3 to BW

When extracting from one of the datasource I am getting the short dump. below is the source code of the same.
Source code extract
Get boundaries of next TID block
L_FROM_INDEX = L_TO_INDEX + 1.
IF L_FROM_INDEX GT NFILL. EXIT. ENDIF.
L_TO_INDEX   = L_TO_INDEX + L_BLOCK_SIZE.
IF L_TO_INDEX GT NFILL.
L_TO_INDEX = NFILL.
L_BLOCK_SIZE = L_TO_INDEX - L_FROM_INDEX + 1.
ENDIF.
Create hashed index on TID of TID table
CLEAR L_TH_TID_IDX.
LOOP AT TIDTAB FROM L_FROM_INDEX TO L_TO_INDEX.
L_S_TID_IDX-TIDIX = SY-TABIX.
L_S_TID_IDX-TID   = TIDTAB-TID.
COLLECT L_S_TID_IDX INTO L_TH_TID_IDX.
ENDLOOP.
Select TID block from STATE table
SELECT * INTO TABLE L_T_STATE
       FROM ARFCSSTATE FOR ALL ENTRIES IN L_TH_TID_IDX
       WHERE ARFCIPID   EQ L_TH_TID_IDX-TID-ARFCIPID
         AND ARFCPID    EQ L_TH_TID_IDX-TID-ARFCPID
         AND ARFCTIME   EQ L_TH_TID_IDX-TID-ARFCTIME
         AND ARFCTIDCNT EQ L_TH_TID_IDX-TID-ARFCTIDCNT
       ORDER BY PRIMARY KEY.
Consistence check
DESCRIBE TABLE L_T_STATE LINES L_LINES.
IF L_LINES NE L_BLOCK_SIZE OR
   L_LINES EQ 0.
MESSAGE X097(SY).
ENDIF.
PERFORM DELETE_BATCH_JOB
        USING    L_T_STATE
        CHANGING L_S_TID1.
Update LUW-Status und Zeit
CLEAR L_T_STATE_IDX.
CLEAR L_TH_TID2_IDX.
CLEAR L_T_TID.
LOOP AT L_T_STATE INTO L_S_STATE.
L_S_STATE_IDX-TABIX = SY-TABIX.

Hi Pavan,
                 This is a table space error.
Regards,
rahul

Short Dump testing 0CRM_SALES_ACT_1 Datasource Extraction

Hi
Please can someone assist with the following problem in CRM 4.0. Using transaction RSA6-Extractor Checker S-API for 0CRM_SALES_ACT_1, we get a short dump when clicking on 'Extraction'. The following error message is displayed.
'An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_TYPE',
was neither
caught nor passed along using a RAISING clause, in the procedure "INSTANTIATE"
"(FORM)"
Any assistance is much appreciated.
Thanks
Neil

Resolved.

Empty System Fields after error creates a short dump

Hello!
Could someone please help me?
After calling a function, I catch errors with sy-subrc NE 0.
Handling this error the "normal" way throws a short dump (I marked the row bold), because all the system fields are empty!
Could someone please give me a hint, how to handle this situation?
Many thanx in advance!
Perhaps some code:
CALL FUNCTION 'Z_CONFIRM'
EXPORTING
    is_bdnum      = is_bed-bdnum
TABLES
    et_return     = lt_return
EXCEPTIONS
    error_occured = 1
    lock_error    = 2
OTHERS        = 3.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
I get a short dump with this:
Content of the system fields
Name
Wert
SY-SUBRC
1
SY-INDEX
1
SY-TABIX
1
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
HTTP-Steuerung
SY-MSGTY
SY-MSGID
SY-MSGNO
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080117
SY-UZEIT
080907
SY-XPROG
SY-XFORM

Hi,
You need to capture the message like this way
IF sy-subrc eq 1.
   message e999(your mesage class) with 'Error Occured'.
endif.
IF sy-subrc eq 2.
   message e999(your mesage class) with 'Lock error'.
endif.
IF sy-subrc eq 3.
   message e999(your mesage class) with 'Other Errors'.
endif.
a®

CX_SY_FILE_OPEN_MODE - short dump on production but not in Dev and Test

Hello,
I'm getting the follwoing short dump in production when I run the program which writes the data to application server. I have open data set and close data set. Same program when I in development and test I do not get any short dump. Can any know what could be cause for this.
CX_SY_FILE_OPEN_MODE
Copy paste of error analysis from ST22 short dump -
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_FILE_OPEN_MODE', was not
     caught in
    procedure "DATA_UPLOAD_APP_SERVER" "(FORM)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    When accessing the file "/bw/FTPOUT/BPR/OTHER/test.csv", the system recognized
     that this file is
    not open. Therefore, the file cannot be accessed.

The file could not be OPENed in your production system for a variety of reasons - no authorization, file doesn't exist etc. You should have check sy-subrc right after OPEN DATASET and if not zero, yous should not TRANSFER or READ the file and instead you should have given a message with sy-msgid and sy-msgno which would give you the reason. The dump here is simply saying that OPEN is unsuccessful, so any subsequent READ or TRANSFER would throw runtime dump, if done after an unsuccessful OPEN.

0PROJECT_ATTR datasource throws short dump in bw

Similar Messages

Maybe you are looking for