0PS_C02 update rules are not getting activated when i install 4rm BI conten

Hi All,
In BI Dev. sys for PS module- Project System - Dates 0PS_C02 cube- update rules are not getting activated when i install from the business content and its giving the error " IC=0PS_C02 IS=0PS_DAT_PRJ error when checking the update rules Message no. RSAU461" .
I deleted the inactive update rules(6 nos) and installed again from BI Content, then the same issue raising.
Can anyone help me out as i stuck up with this to move to go-live.
Thanks,
Sakali

Hi Vassu,
here are some of the reasons for getting error in update rules activation.
1. Check the formula or routines that are used in Update rules and check is there any syntax errors.
2. check whether the mappings are correct or not.
3. check the info objects which ur used for mapping are in active or not..
(or) if the info object may be deleted which ur using for mappings.
Thanks
Sai Chand.

Similar Messages

Update rules are not active

update rules are not active when transported to quality.
what can possibly be the error. where to check and correct this issue ?
thanks,
Amit

Amit,
In your update rules ,i hope there some start routine of update routines couls be there and those rotines didn't transported successfully .Check your update rules in DEV
Regards
Prasad

Rules are not getting fired - urgent

Hello
I am a newbie to the oracle rules engine (10.1.3) and introducing the rules engine in our architecture.
I have started to fire a simple rule but looks like the rules are not getting fired.
Here is my code snipped: I am setting a value in the fact if another value is null.
==========
RuleDictionary rDict = RuleFactory.getRuleDictionary(RadiusConstants.RADIUS_REPOSITORY, RadiusConstants.RADIUS_DICTIONARY, RadiusConstants.DICTIONARY_VERSION);
RuleSession ruleSession = new RuleSession();
ruleSession.executeRuleset(rDict.dataModelRL());
ruleSession.executeRuleset(rDict.ruleSetRL(taskName));
RuleMessage ruleMessage = new RuleMessage();
ruleSession.callFunctionWithArgument("assert", moduleVo);
ruleSession.callFunction("run");
ruleSession.callFunctionWithArgument("assert", moduleVo);
// ruleSession.callFunctionWithArgument("assert", moduleVo);
System.out.println(" Module Status " + moduleVo.getStatus());
========
Any help is greatly appreciated. I am not sure if I am missing. I am suing rule author to create the rules.
I am asserting the fact in the rules engine. Here is the RL file generated from the rule author.
==================
ruleset MODULE_CREATE
2.
3. {
4.
5. rule ModuleId_Null
6. {
7. priority = 0;
8. if
9. (
10. (
11. fact gov.sec.radius.admin.service.module.vo.ModuleVO v0_ModuleVO && (
12. (v0_ModuleVO.moduleId == null)))
13. )
14.
15. {
16. v0_ModuleVO.status = "P";
17. assert(v0_ModuleVO);
18. }
19. } //end rule ModuleId_Null;
20. }// end ruleset MODULE_CREATE
=================
thanks very much in advance
Yugandhar

You need to specify the ruleset or rulesets that should be run. If there is only one, you can do:
ruleSesion.callFunctionWithArgument("run", taskName);
or
ruleSesion.callFunctionWithArgument("pushRuleset", taskName);
ruleSession.callFunction("run");
If there are multiple rulesets you want to run in order, then call pushRuleset in stack-order that you want their actions executed.

Updates rules are not active when transported from developmet to quality

Dear friends,
I had made some in changes in strat routine in update rules BW development and saved in request and transported to qaultiy
se09-child request -parent request -
In bw testing I have activated the update rules and saved in different request but I now updates rules not acitve .
Please suggest me where ihave gone wrong ..
Regards
shekar reddy

Hi Sriram,
Download the below documents for reference related to Transports
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50b1d20e-c1e8-2c10-d9b9-d48eb3a83d89
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/205caa59-a948-2e10-b397-9ccafd3d4f5b
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2050db8b-9d90-2c10-2980-b13a4b0938f6
Regards,
Venkatesh

Child forms are not getting displayed when user is linked through the targe

I have provisioned the users to OID through OIM and we have the three child forms(USRB_ROLB,USRB_GRPD,USRB_NBNB) which work well when the user flow normally. Our normal flow implemented is that user comes from OHCM and get created in OIM and then get provisioned to AD and OID. We have also implemented the OID target recon. When we create the user directly in OID and then create the user through normal flow ie from OHCM to OIM) as expected the create user task fail as the user is already present in the OID (target system). Then after running the OID target recon the user is getting linked but its not showing the child forms in the new process form created after running the target recon.
Please let me know if you require more information.
Please let me know if anybody has encountered this issue and the steps to resolve the same

what happened when you run target recon without creating user in oim(or just create user in oim without access policy and then run target recon)? Is this work fine?
If no means you have to verify your child table mapping. But if above work then this the Produce/connector issue and may you need to raise SR

Customer invoices are not getting cleared when lockbox file imported in sap

Hello ,
When the lockbox file is imported into SAP , it is not able to clear customer invoices. It creates SAP documents and payment advices but not able to apply the payments to customers accounts.
Can anyone suggest on this with possible solutions.
Regards,
suresh

Hi,
You have to check the invoices are being match. The options are the following according to selection screen in FLB2:
Document numbers (BELNR)
Reference document numbers (XBLNR)
Document number first, if not found: reference doc. number
Reference document number first, if not found: doc. number
Document number first, then reference and amount
You have to check if the information which is coming in the file is the same present in the invocies in the ERP.
Also check the settings in OBAX and OBAy.
REgards,
Renan Correa

Help-Cubes are not getting started when Analytical server started in 11.1.1

Installed Oracle Essbase Analytical server along with Shared Services, Provider Services and Integration Services thru EPM v11.1.1.3. Shared services and provider services on Windows 2003 and Essbase Analytical Services and Integration Services on UNIX/AIX. All the components got configured successfully. Copied the essbase.sec from the server which has previous version (v11.1.1.1.0) of Essbase. We have been encountering couple of problems. The first one is the applications(cubes) didn't start when the analytical server started. The second one is when trying to start using MAXL script, the applications took long time (more than 30 minutes) to start.
Any suggestions that you may have in resolving this are appreciated. Thanks,

In the application properties, is the box 'Start application when Essbase server starts' checked? If not, that's why they didn't automatically start. Also, once you started them manually, does it still take 30 minutes to start? Or is shutdown and startup faster now?
Sabrina

The values for list items of other data blocks are not getting displayed when executed.

Hi,
    I have a new problem again.
    I am doing a new form in which there are around 8 blocks. All the blocks have their tables in the oracle database.
    Each block has 18 columns with the same column & column names. But the values in those columns are different & the values do not match.
    The problem lies while i execute the form, it populates only the first block data. Other blocks do not display or populate the values.
    I cannot create a master relationship because all the column values are different.
    How do i display or populate the values of all the tables?
   Please help me. Thank You.

hi
if your form has truly disassociated tables, then you could simply use a key-exeqry trigger at forms level to travel to each block in turn and perform an execute-query built-in, eventually returning to the starting block.
ie
go_block('..');
execute_query;
go_block('..');
execute_query;
etc
go_item(......);
In this case you would use the block where clause to constrain each table to the appropriate set.
If however, the database has no relationships between the tables but the data content has some corelation, then you could craft a forms relation manually.
cheers
Rod

Emails sent from Thunderbird are not getting received when signature attached

Emails sent from Thunderbird aren't being received by my yahoo and gmail accounts when I have the signature attached.
It's a business email account, and I really need to have a professional signature.
Thank you
Susan

There is a reason we suggest only composing HTML signature in the composer and saving the file. However, could you email me to see what that signature actually looks like (It might bounce we will see how google likes it.) this forum really messes up HTML source
Click on my name beside the response on the forum for my email address.

3.x Update rules does not appear in std 0IC_C03 business content

Hi,
We are using BI 7.0.
When trying to install business content update rules for the cube 0IC_C03 (DATA FLOW BEFORE), the three update rules are not appearing in the screen for installation.
Instead , I'm getting three Transformations !! But I need 3.x Update rules only.
Note : The data source used are of type 3.x ONLY.

Hi,
When you Create the update rules manually by default Keyfigures will be set to no-update. You have to propose the rules as you want and it depends on the requirement. And for 0IC_C03 Inventory Cube, almost all the Kfigs are updated based on Routines.
So it is better to Install from BI Content.
Replicate your Datasources. Then Install Transfer rules,and then Install update rules.
Hope this Helps,
Regards
Karthik

Toolbar icons are not getting focus

The buttons on the toolbar are not getting focus when I move the mouse over the buttons. I am facing this problem if I use JRE 1.5.0_15 but it is working fine in JRE 1.6.0_6.
But I need solution in JRE1.5.0_15.
Can anybody please help me out is there any work around in JRE 1.5.0_15.
Regards
Venkat

I found the solution, We need to change
some coding style by giving conditions for particular version , foe example we should make changes in color initialisation. Insteatof color.red , use [RGB,1,0,0] and many.........

HT1688 I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active.

I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active. What is that mean?

Razmee,
Guess what? After posting, I read another thread on this topic where someone said they went to an Apple store and the tech person there added the optional username and password in the Outgoing Mail Server boxes, and then reset the phone again. Although I had tried resetting and restarting a few times today, I had NOT reset it after entering the username and password into the optional fields.
When I entered my username and password into the optional fields, the iPhone entered checks (ticks) to the right of every entry; it had not done this earlier. (I didn't reset at this time, and the outgoing mail would still not transmit).
So just now, I reset it and the outgoing email was sent!
Thanks to you and this forum, it's a great ending to a few frustrating days.
I hope this message helps others. Not only does everything have to be entered correctly in the respective boxes; but once everything is entered and you press the "Done" button, every box should then have a check mark next to it and then you must reset the phone.

Backened documents are not getting updated in Classic Scenario

Hi,
We are using SRM 7.0 version and we are working on classic scenario where the shopping cart - RFX - Contract are created in SRM and the PO - GR - IR are created in ECC. The blackened documents which are created in ECC PO - GR and IR these documents are not getting updated in SRM system.
Is there any business functions to be activated.

Hi Sunil,
You manually run report ""BBP_GET_STATUS_2" after PO is created in MM. Then check if the follow-on-docs are updated in SC.
If it is working fine after you manully run report, you will have to properly set time to run this report automatically.
Best Regards,
Anu
Edited by: Anuradha UG on May 18, 2010 8:09 PM

Taxes are not getting updated in PO

Dear All,
I have done some changes in pricng and tax calculation procedure.
But for old POs the calculations are not getting updated when i sees at invoice tab in PO. To make affect the same I need to unrelease the PO, SAVE and again release the PO.
Is there any other way for updating the tax calculations at invoice tab in PO.
Regards,
Rakesh

>
Rakesh Shelar wrote:
> Dear All,
>
> I have done some changes in pricng and tax calculation procedure.
>
> But for old POs the calculations are not getting updated when i sees at invoice tab in PO. To make affect the same I need to unrelease the PO, SAVE and again release the PO.
>
> Is there any other way for updating the tax calculations at invoice tab in PO.
>
> Regards,
> Rakesh
Only other way possible is abap script to be made to change Po data without changing the release. Otherwise you need to unrelease the Po's first, then change the data and then save for your changes to get affected.

Values are not getting updated in 'stocks App' in my i4 phone. What is the solution?

values are not getting updated in 'stocks App' in my i4 phone. What is the solution?

you have encountered activation lock. Read iCloud: Activation Lock

0PS_C02 update rules are not getting activated when i install 4rm BI conten

Similar Messages

Maybe you are looking for