0RECORDMODE in master data
All,
I have a quick question on using 0recormode field for updates and deletions on master data. I have a master data info object in BI and there are deletions in the source system. Can 0recormode carry out the deletions for master data? Assume it can then what happens if a record with a 'D' flag in 0recormode is already being used in the reports. (so there is an SID for this record)
Anyone has any experience on this kind of scenario? I appreciate any help.
Regards,
Mike
Hello,
0RECORDMODE would not work with infobjects.
You can use DSO instead.
There are background programs that run for DSO which take care of processing in DSOs.
But you cant achieve the same with help of infoobjects.
Regards,
Shashank
Similar Messages
-
HI,
How do we load from master data infosource into an ODS , using datamart concept. can any one give me step by step details..
When i try to assign infosource to the ODS in the update rules...it says " INFO OBJECT 0recordmode missing from the infosource"
Thanks in advance
Message was edited by:Hi Harshi,
Add 0recordmode in master data infosource and ROCANCEL in tranfer structure
also check this info,
Message RSAU128 'InfoObject 0recordmode missing is an information message, you can activate the update rules even without 0RECORDMODE. The field is required for the delta method of InfoSources with connected DataSources from an SAP R/3 system. For FlatFile DataSources or external DataSources InfoObject 0RECORDMODE does not need to be contained in the transfer structure of the InfoSource, or it does not need to be filled separately in the transfer rules. In the transfer rules when maintaining the transfer structure, the delta method for flat files or external DataSources is determined by field Update mode. In InfoSources that get their data exclusively from flat files or external does not need to be contained in the you can ignore the above-mentioned message when creation update rules."
Hope this helps,
Sudhakar. -
Where are the changes in R3 captured in ROCANCEL, mapped to for Master data
Hi Experts,
I have now read extgensively about 0Recordmode and how it becomes part of the DSO and changes in R3, captures in ROCANCEL gets mapped to 0Recordmode.
But when the datasource is a master data, such as 0Plant_Attr, which is going to flow into the InfoObject, 0Plant; we know 0Plant does not containt 0Recordmode as seen in the case of the DSO. So, without 0Recordmode, where are the changes in R3 captured in ROCANCEL, mapped to when it comes to master data, such as 0Plant
ThanksHi,
0Recordmode is the BW concept in Delta Loading to DSO. It is not R/3 concept.. SAP has provided To make the BW system to understand the entire info about the delta. As you know this is mapped to ROCANCEL.
ROCANCEL holds the changes from R/3 side.
The delta process (how the data is transferred) for the DataSource is determined in the table ROOSOURCE(in the source system)
Properties of the delta process are determined in the table RODELTAM (in BI). So Master Data Changes will be handled by this way.
Regards,
Suman -
Can not find master data in the cube
ItemNo is an navigation attribute of 0Material. We are using 0material in a cube. When I display the cube data include ItemNo, I don't find the data I am looking for. For example:
In 0Material:
0Material ItemNo Description
AAA 001 Test
BBB 002 Test
In the cube I expect to see:
0Material ItemNo On Hand Qty
AAA 001 1000
BBB 002 2000
Instead I saw:
0Material ItemNo On Hand Qty
AAA 1000
BBB 2000
0Material got refreshed after cube data got loaded. Is that why I don't find the refreshed Master data?
Thank you!Hi,
When you laod the cube, the Values for Master are automatically get created in the master data (If they are not present earlier and with "Data Update Type in the Data Tragets" setting in InfoPackage).
Now when you are loading your cube with 0Material and Item Number, the values for Item Number seems blank. Thats the reason why you are not able to see the Item Number in Cube though it is present in Master. Because now these are two different keys, one with Item Number value and other without Item Number value.
Regards,
Yogesh. -
Master data is not getting displayed in the Report in Quality
HI Experts,
I have ZESP_Num as master for my transaction data.
I have loaded the data in the Development and designed and checked my report. It is working fine.
But after moving it to Quality. My report is not getting the master data.
When I try to do right click manage ZESP_Num.
I'm getting message like this.
The data from the InfoProvider ZESP_NUM involved could not be checked
Message no. DBMAN242
Diagnosis
A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
Can anyone plz help me.
ThanksHi,
Please check the SNOTE Note 1364083 u2013 Message text will appear unexpectedly in surface.
Hope helpful.
Regards,
RAO -
Master data is not getting displayed in the Query Designer
Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
ThanksHi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks -
Hello friends
I have error while creating financial transaction. Payment details are not retrieving from BP master data to creating financial transaction screen.
No payment details entered for transaction
Message no. FTR0030
Please advise to set off this.
Thanks & Regards
SwamiDear Swami,
Please select one payment details in Business partner and use assigned tab from top selection parameter from standing instruction to assigned bank details to product type.
It will open other window like above example for each product of treasury, then assign bank details to product. Once assigned and save.
System will pick payment details in deal automatically based on business partner.
Hope this solve your issue.
Regards,
Jain
Message was edited by: Jain Varghese -
Error while deleting master data (Message no. RSDMD118)
Dear all,
I am performing a test to create and delete new Company Codes in Consolidation Workbench.
Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
Error while deleting master data
Message no. RSDMD118
Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
Appreciate assistance to troubleshoot and resolve this error.
Thank you.Thank you both for your replies.
I am sure those are not the case here as I deleted the Company immediately after creating it.
Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
Use of: Company UAT1 UAT Company 1
Number of Uses Found: 0
However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this. -
Error while deleting the Master data
Hi Friends,
i am getting the below error while deleting the data from a master data:-
The system is unable to delete all of the specified master data,because some of it is still in use. (See log:Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no longer in use?
Could you guide how should i proceed to delete the data.
Regards,
HirdeshHi Hirdesh,
If you are using master data in someother data targets u cant delete master data.So first you have to delete the data in data targets where this particual master data object is used, then remove the data in master data object.
Regards
Prasad -
Creation of Assets master Data
Dear All,
Now we need to upload master data for Asset materials, which we are treating as UNBW Mat type (Non valuated materials). If we want to sell it after 1 Year & then what is the procedure ? In UNBW mat type there is no sales views maintained.
pls exp me
regds,
Channahi,
Do try to create the new material type with your specified view, you may also copy the exisisting the mataerial types, so that the you can get few of the default settings automatically and for few you can make changes...
Regards
Priyanka.P -
What are the dependent master data for running MRP
Hi Experts,
My client wants to Run MRP After 8 Months of implementation. Now i want to know
1) What are the Master Data need to be check. They are Using the Strategy 20.
2) They have confirmed sales order for few customers. Forecast sales orders for few customers.How to map it in sap.
3) Where will i get Gross Requirement in SAP. Because MRP run will generates the net requirements.
4) Is there any report in SAP displays the Forecast values for the selected material.
Please help me on the above points.
Thanks
SatheeshHI Vishwa Upadhyay,
Thank you Once again,
The first point is cleared. Can you please suggest me on the 2,3& 4 points please. What are the configuration settings needed for the different sales order type( i.e.. confirmed and forecast)
Thanks
Satheesh.N -
What are the tables will update while loading Master data ?
Hello Experts,
What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects.It depends upon the type of Master data u r loading....
In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
But the exceptional tables that get updated depending on the type of master data are.....
If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
All the above tables are for ATTRIBUTES
But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
C = Customer Defined Characteristic
0 = Standard or SAP defined Characteristic
* = P, Q, T, X,Y, S (depending on the above said conditions)
Thanks & regards
Sasidhar -
Automatic PO creation from PR with no master data
Dear gurus,
Is it possible to run ME59- Auto PO creation from approved PR with no master data/source assigned/PIR? Assuming user create adhoc PR.
Is it possible to run this process successfully if i didn't meet on the criteria below? let say no.1 is not checked?
1.Material Master purchasing view, check automatic PO check box.
2. Vendor Master purchasing view, check automatic PO check box.
3. Maintain Source list for Vendor and Material (transaction ME01) and also see validity period.
4. Maintain Purchase Info Record (transaction ME11), check info record category (must be standard or pipeline or subcontracting)
5. Create a Purchase Requisition ( transaction ME51N), during creation select check box of Source Determination.
6. Use transaction ME59 and execute for purchase requisition for vendor, you will be able to create automatic PO.
Thanks in advance.Hi,
yes all point should be checked
check following link
[http://www.sap-img.com/materials/steps-to-create-auto-po.htm]
Regards
Kailas Ugale -
Steps to prepare and upload legacy master data excel files into SAP?
Hi abap experts,
We have brand new installed ECC system somehow configured but with no master or transaction data loaded .It is new empty system....We also have some legacy data in excel files...We want to start loading some data into the SAP sandbox step by step and to see how they work...test some transactions see if the loaded data are good etc initial tests.
Few questions here are raised:
-Can someone tell me what is the process of loading this data into SAP system?
-Should this excel file must me reworked prepared somehow(fields, columns etc) in order to be ready for upload to SAP??
-Users asked me how to prepared their legacy excel files so they can be ready in SAP format for upload.?Is this an abaper job or it is a functional guy job?
-Or should the excel files be converted to .txt files and then imported to SAP?Does it really make some difference if files are in excel or .txt format?
-Should the Abaper determine the structure of those excel file(to be ready for upload ) and if yes, what are the technical rules here ?
-What tools should be used for this initial data loads? CATT , Lsmw , batch input or something else?
-At which point we should test the data?I guess after the initial load?
-What tools are used in all steps before...
-If someone can provide me with step by step scenario or guide of loading some kind of initial master data - from .xls file alignment to the real upload - this will be great..
You can email me some upload guide or some excel/txt file examples and screenshots documents to excersize....
Your help is appreciated it.!
Jonhi,
excel sheet uploading:
http://www.sap-img.com/abap/upload-direct-excel.htm
http://www.sap-img.com/abap/excel_upload_alternative-kcd-excel-ole-to-int-convert.htm
http://www.sapdevelopment.co.uk/file/file_upexcel.htm
http://www.sapdevelopment.co.uk/ms/mshome.htm -
About delta loading for master data attribute
Hi all,
We have a master data attribute loading failed which is a delta loading. I have to fix this problem but I have two questions:
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
2. Could you please let me know the detailed procedures to perform this delta loading again ?
Thanks a lotHi...
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
Look.....for master data.....no need to delete request from the target..........just make the status red.......and repeat the load.....But problem is that master data sometimes does'nt support Repeat delta..........if u repeat......then load will again fail with Update mode R.........in that case u hav to do re-init.......
1) delete the init flag.......(In the IP scheduler >> in the top Scheduler tab >> Initialization option for source system)
2) Init with data transfer(if failed load picks some records)..........otherwise .....init without data transfer.....if the last delta failed picking 0 records.......
3) then Delta.......
2. Could you please let me know the detailed procedures to perform this delta loading again ?
1) Make the QM status red.........to set back the init pointer.......
2) Repeat the load.....
After that.........if again load failed with Update mode R.....
1) delete the init flag.......
2) Init with data transfer(if failed load picks some records)..........otherwise init without data transfer.....
3) then Delta.......
Regards,
Debjani.....
Maybe you are looking for
-
The Windows support software could not be saved to the selected drive
I am trying to use bootcamp assistant to set up windows 7 on my 27" iMac (late 2013). I follow the instructions: select all the tasks in the 'select tasks' pane, then I choose the 32GB MS-DOS (FAT-32) flash drive that I am using and the windows 7 hom
-
Configure a intel i915 (Solved)
I need help to configure a intel i915 chipset, I installed the 3ddesktop package, and the command "3ddesk" gives me this message: Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GL
-
does the macbook have a screen cover that makes it so the person next you cannot see what you are doing?
-
Samsung 244T on Mac OS X - does it rotate to portrait mode?
I'm thinking of buying a Samsung 24" LCD panel - one of it's more interesting features (for me, at least) is the ability to rotate the panel from landscape to portrait mode - does anyone know if this feature works for sure in MacOS X? Dual 2GHz G5
-
Device type file compatability with different SAP versions
Hi All, I need to know whether there is any difference in Device type file (.PRI) for different SAP versions [ SAP 4.6b , 4.6c, 4.7, mySAP ERP 2005.,] Is there any change in .pri file required when upgrading/degrading SAP versions?