0SEM_BCS_10 ??

Hello All,
I understand for BCS 0SEM_BCS_10 is the latest data source, is that right ??
If yes then what is the loading strategy as this data source dose not permit delta load?
Thanks & Regards,
Suneel

Hello,
This is difficule process. You need R3 (mySAP) and SEM-BCS (BW)
First step:
In R3, transaction SBIW and find this 0sem_bcs_10. Next, you activate it.
Secend step:
BW: transaction RSA1, choose DataSource and under right buttom mouse choose Replicate Metadate. When the finish proccess you should see 0sem_bcs_10.
If you need to  transfer delta data you must create DSO for the 0sem-bcs10. This is do it in BW (transaction RSA1).
Regards,
Anka
Edited by: Anka on Mar 12, 2010 5:36 PM

Similar Messages

  • I want to use the DATASOURCE  0SEM_BCS_10

    Hi All,
    I want to use the DATASOURCE  0SEM_BCS_10.
    I  activated the datasource in R/3 SAP ECC 6.0, but when in tried to to check the extrtactionin Transaction RSA3, I go no records for this datasource.
    Is there any other setttings to be done before we extract please suggest.
    WE are on SAP ECC 6.0 with support patch 14 and on BI we are on BI 7.0 with support patch 20.
    Thanks in advance.
    Nilesh Labde

    Hi,
    You would need to fill the setup tables of the datasource before extracting the data in RSA3.
    The setup table can be filled through transaction SBIW.
    regards,
    Mahesh.

  • I want use 0SEM_BCS_10  info cube for our BCS in BI.

    Hi ,
    I want use 0SEM_BCS_10  info cube for our BCS in BI. We have an R/3 ECC 6.0 with Appl Support Patch 15.
    We have not implemented the NEW GL functionality in OUR R/3 system. We have done only Technicahal Upgradation fron 4.7 to ECC 6.0 last year.
    My question is, that can i Use this '0SEM_BCS_10'  infocube . If yes that, please povide some details
    Regards,
    Nilesh Labde

    Hi Nitesh,
    Before using Cubes for BCS, Please go through this url
    http://help.sap.com/saphelp_sem60/helpdata/en/a8/b3d63bc4a69574e10000000a11402f/frameset.htm

  • There is a standard cube for 0SEM_BCS_10?

    Hi guys. I`m willng to use 0SEM_BCS_10 to get data fo preparation to consolidation. But I didn't find a standard infocube to get these data that cames from 0SEM_BCS_10..it will be a "staging" cube where the BCS cube (0BCS_C10) will get data by data stream ...do anyone know if there is this standard cube or I will have to create a Z?
    Regards,
    Thiago

    Hi,
    There is no standard cube for this datasource. You have to create a Z-cube. And please use more searching in the forum.  I answered such a question a couple of times before.

  • 0SEM_BCS_10 in Document Currency ???

    Hello Experts,
    Could you please tell me whether 0SEM_BCS_10 provide data in Document Currency or Local Currency.
    In supporting financial notes I have to display reports by different currency.
    Thanks & Regards,
    Suneel

    Hi Suneel,
    Cannot check it in the system. But have a very strong doubt that the DS provides the document currency, since it doesn't work on the document level. It works on the level of totals records!

  • Datasource 0SEM_BCS_10

    Hello,
    has anyone experience with the datasource 0SEM_BCS_10?  This is especially created based on table FAGLFLEXT and serves to load financial data into BW as basis for consolidation (SEM-BCS).
    The strange thing is that the values (TSL,  KSL, OSL) are cumulated after a balance carryforward to a new fiscal year, but the quantities (= percentage of investment) are not!
    This would mean that in R/3 (if you use the datastream for SEM-BCS) you should post your participations percentages every year again! 
    Does anyone here has come across the same issue?
    Kind regards,
    Tom Verlinden

    Hi Bernd and welcome to SDN,
    Your BW 3.5, SEM 4.0 & FINBASIS 3.0 look too inappropriately old to me.

  • Documentation / Link for 0SEM_BCS_10

    Hello Community,
    I am interested in using  0SEM_BCS_10 but haven't found any documentation about this datasource at help.sap.com or anyone else in this forum. Is there some functional description / documentation out here on SDN which I haven't found so far or could you provide some links / experiences?
    Best regards
    XZ

    The simpliest forum's search with the only keyword '0SEM_BCS_10' gave me 30 hits. Please try harder.

  • 0SEM_BCS_10 or 0FI_GL_10

    Hi all,
    We are implementing SEM BCS60 and ECC60 with new GL. Understand that SAP is providing the above two datasources to extract consolidation data from ECC (FAGLFLEXT) to staging cube and subsequently to the 0BCS_C11 total cube.
    I have came across a note indicating that 0FI_GL_10 comes with some limitation in preparing data for consolidation.
    1)  What limitations SAP are referring to when it comes to datasource 0FI_GL_10 ?
    2)  Is 0SEM_BCS_10 is the datasource for extracting consolidation data from ECC?
    Appreciate prompt reply. Thanks
    Regards

    Hi Mah,
    To answer your second question, the 0SEM_BCS_10 data source could be preferred with new GL due to following reason:
    1] The data source 0SEM_BCS_10 structure readily contains the following new GL filds fields which can be used in consolidation with out modifying the data source:
                     Trading partner
                     Partner profit center
                     Consolidation transaction type
    2] It is not that 0SEM_BCS_10 is the only data source with new GL , you can use other datasource also. But when all required fields for 0BCS_C11 is not available with business content data source you will be required to customize.

  • Does 0SEM_BCS_10 supports Delta?

    Hi Guys,
    Does dataSource 0SEM_BCS_10 supports delta?  I found and implemented the note 1008953,  however, the delta is still not enabled.  Is there a work around or a step I am missing? 
    Thanks
    Paul
    Note 1008953 - Delta for 0SEM_BCS_10 is not supported
    Note Language: English Version: 2 Validity: Valid from 12-12-2006
    Summary
    Symptom
    The DataSource 0SEM_BCS_10 is not capable of producing delta figures.
    More Terms
    0SEM_BCS_10
    Cause and Prerequisites
    Read Note 852971 for further information.
    Solution
    Implement the relevant Support Package.

    Hi Eugene,
    Thanks for the input.  I got the sense that 0SEM_BCS_10 doesn't support delta, but I just want to make sure since the note 1008953 kind of implies the issue can be fixed by implement the relevant support package. 
    I looked carefully at note 852971, and it does states that the new GL (0FI_GL_10) contain partner profit center and company ID for trading partner, and this is validated with extractor checker. 
    This pretty much solves our issue.
    Thank you very much!
    Paul

  • 0sem_bcs_10 update delta

    Hi gurus
    do you have any experience with the datasource 0sem_bcs_10? this datasource have update full, how can i do for update delta to the infoprovider?
    thanks in adavance
    cheers

    Hi Eugene,
    Thanks for the input.  I got the sense that 0SEM_BCS_10 doesn't support delta, but I just want to make sure since the note 1008953 kind of implies the issue can be fixed by implement the relevant support package. 
    I looked carefully at note 852971, and it does states that the new GL (0FI_GL_10) contain partner profit center and company ID for trading partner, and this is validated with extractor checker. 
    This pretty much solves our issue.
    Thank you very much!
    Paul

  • Datasource 0SEM_BCS_10 in NW4 needed

    hello,
    we use BW/BI on NW4 with den following patches:
    SAP_ABA 640 0018
    SAP_BASIS 640 0018
    PI_BASIS 2005_1_640 0009
    ST-PI 2005_1_640 0007
    SAP_BW 350 0018
    FINBASIS 300 0016
    BI_CONT 353 0011
    SEM-BW 400 0016
    ST-A/PI 01J_BCO640 0000
    note #935370 says, that we need:
    ERP 2005: Support Package 05 for the software component SAP_APPL 600, or
    ERP 2004: Support Package 13 for the software component PI 2004_1_500
    what is with our release??? is there an other option???
    kind regards,
    bernd angerhofer

    Hi Bernd and welcome to SDN,
    Your BW 3.5, SEM 4.0 & FINBASIS 3.0 look too inappropriately old to me.

  • Data source

    Hi
    This is my first implementation project and I want to be doubly sure about the choice of data source. I willl be using copy of  0BCS_C10 cube as a data basis. I will be extracting data from FAGLFLEXT table and for which I will be using 0SEM_BCS_10 as the data source in terms of note 852971. I further understand that this is not capable of delta update as per note 1008953 meaning I need to do a full upload to the cube. My concern is performance issue as the day passes due to data growth. Appreciate your thoughts and inputs based on your experience.
    Regards

    Hi,
    You have to activate this datasource in your ECC source system (RSA5 - or RSA6 t-codes), then replicate it in your BW-myself system. Then you'll see it. You have to do (create) all the elements in the chain Datasource - DSO - cube (with all transformations) manually.
    Besides, there is a lot of work with proper configuring the DS in the ECC system in order to fill the DS correctly.

  • Can we use 0INFOPROV as a selection in Load from Data Stream

    Hi,
    We have implemented BW-SEM BPS and BCS (SEM-BW - 602 and BI 7 ) in our company.
    We have two BPS cubes for Cost Center and Revenue Planning and we have Actuals Data staging cube, we use 0SEM_BCS_10 to load actuals.
    We created a MultiProvider on BPS cubes and Staging cube as a Source Data Basis for BCS.
    Issue:
    When loading plan data or Actuals data into BCS (0BCS_C11) cube using Load from Data Stream method, we have performance issue, We automated load process in a Process Chain. Some times it take about 20 hrs for only Plan data load for 3 group currencies and then elimination tasks.
    What I noticed is, (for example/) when loading Plan data, system is also reading Actuals Cube which is not required, there is no selection available in Mapping or selection tab where I can restrict data load from a particular cube.
    I tried to add 0INFOPROV into databasis but then it doen't show up as selection option in the data collection tasks.
    Is there a way where I can restrict data load into BCS using this load option and able to restrict on cube I will be reading data from ?
    I know that there is a filter Badi available, but not sure how it works.
    Thanks !!
    Naveen Rao Kattela

    Thanks Eugene,
    We do have other characteristics like Value Type (10 = Actual and 20 = Plan) and Version (100 = USD Actual and 200 = USD Plan), but when I am loading data into BCS using Load from Data Stream method, the request goes to all the underlying cubes, which in my case are Planning cubes and Actual Cube, but I don't want request to goto Actual Cube when I am running only Plan load. I think its causing some performance issue.
    For this reason I am thinking if I can use 0INFOPROV as we use in Bex queries to filter the InfoProvider so that the data load performance will improve. 
    I was able to to bring in 0INFOPROV into DataBasis by adding 0INFOPROV  in the characteristics folder used by the Data Basis.
    I am able to see this InfoObject Data Stream Fileds tab. I checked marked it to use it in the selection and regenerated the databasis.
    I was expecting that now this field would be available for selection in data collection method, but its not.
    So If its confirmed that there is no way we can use 0INFOPROV as a selection then I would suggest my client for a redesign of the DataBasis it self.
    Thanks,
    Naveen Rao Kattela

  • R/3 preperation for BCS

    Dear Friends,
    I am currently involved in an SEM BCS implementation. Before the data is extracted from R/3 to BCS i need to do certain data preperation on the R/3 side such as
    1) Maintain the trading partner in vendor and customer masters 2) Maintain group chart of accounts in the GL.
    What else needs to be done for enabling elimination of profits on inventory.
    Shall highly appreciate if you can guide me on the same.
    Thanks and Regards
    Parmanand.

    Hi Eugene,
    Thanks for your prompt reply, but can you please tell me as to what are the additional activities to be done in R/3 for capturing the product group information to enable the "Elimination of profits on inventory".
    Further Note 852971 states that
    The DataSource 0FI_GL_10 is available for extraction but it does not capture the trading partner information, instead the note suggests that DataSource 0SEM_BCS_10 can be used but note "1008953" - Delta for 0SEM_BCS_10 is not supported. suggests that you have to use full upload method instead of delta if you are using the latter. So would you suggest the use of DataSource 0FI_GL_10 or DataSource 0SEM_BCS_10.
    Thanks
    Parmanand

  • BW Based SEM BCS

    Hello...
    I have a problem as explained below , will appricate if anybody can share there experience to help me out of it. THX IN ADVANCE....
    <b>Problem :</b>
    We are using standard extractor 0SEM_BCS_10 for extracting R/3 data for SEM-BCS. We observed that Company ID of Trading partner was not being extracted even for those line items in FI which has Trading partner value.
    We investigated and observed this extractor fetches data from new GL Stagging ledger and further noticed that the stagging ledger captures this information about trading partner only if Scenario "Preparation for Consolidation" is assigned to the stagging ledger. But the problem is extractor is capturing the above information only prospectively and we have the requirment to capture Trading partner information even for our historic data.
    Is there any way we can achive this.
    Thanks & Regards
    Prabhakar

    Hi
    Do you have some document on BCS ?
    Thanks
    Satya

Maybe you are looking for

  • Fast busy signal with incoming calls and unable to connect to voice mail

    We are using CISCO 2821. The system started to have problem connecting to voice mailbox (when dialing internally to the VM extension) and it used to take a reboot to bring it back. Now it will not connect to voice mail (gets fast busy signal), plus i

  • Problem in Extending the article to different sites using listing procedure

    Hi, I am Using IS retail for a book Industry. I have created one listing procedure and Assigned the lsiting procedure in General Assortment. Also I assigned the merchandising catagories and the assortment users(sites) to the assortment. But when I as

  • Disk Cleanup

    Hi. I know theres an extremely hard chance to get a virus on a Mac but is there anything on a Mac for disk cleanups or wiping out "cache"/ temporary internet files for spyware? I am a new mac user so please help. thanks for your time

  • SQL Developer responding slowly

    Hi, I am connecting to Oracle DB from SQL Developer using remote connection through LDAP. I work with sql server management studio regularly but through sql developer this is my first time. I find SQl developer slow compared to sql server management

  • Adding a new Tab - ME22n - Item Detail Level

    Hi, This is a bit Urgent! I need to add a Tab to a TabStrip in Item Detail level, in ME22n that has a count of 12. Out of which 1 is custom made. Someone else had done this development and i can't figure out how it's done. Now, i am adding a 13th Tab