0SOURSYSTEM InfoObject

hello, i upload in rsa1/business content some infoobjects news but say me this message,
Overwrite routine transfer version
content?
Yes / No / Cancel
Please could you say me what means this message.?

I'm updating Business Content with some infoobjetcs, 0BUS_AREA , etc, after say take i see this message: . (attached photo)
0SOURSYSTEM InfoObject:
Overwrite routine transfer version
content?
Yes / No / Cancel

Similar Messages

Steps to create customized Master data infoobjects in BI 7

Hi all,
Can anyone please send the detailed steps to create customized master data infoobject in BI7,and also the data is to be extracted from two different datasources from two different source systems.
Regards,
G.Monica Roja Flora.

Some data modelling tips while creating master data infoobject and extracting data from different source systems -
If there are identical characteristic values describing different objects for the same characteristic in various source systems, you have to convert the values in such a way in SAP BW so as to make them unique.
For example, the same customer number may describe different customers in different source systems.
You can carry out conversion in the transfer rules for this source system or in the transfer routine for the characteristic.
If work involved in conversion is too great, you can compound the characteristic to the InfoObject Source System ID (0SOURSYSTEM). This means it is automatically filled with master data. The Source System ID is a 2-character identifier for a source system or a group of source systems in BW. The source system ID is updated with the ID of the source systems that provides the data. Assigning the same ID to more than one source system creates a group of source systems. The master data is unique within each group of source systems.
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6399e07211d2acb80000e829fbfe/content.htm
Hope it Helps
Chetan
@CP..

Errors with the global conversion rule for the field 0SOURSYSTEM.

Hello Gurus,
We are implementing CRM Activities. I enhanced the data source and when I add new info objects to 0SAL_DS01 DSO and trying to activate I'm getting there errors. Can some one please help me out in this problem?
Error in global conversion rule for InfoObject 0SOURSYSTEM
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0SOURSYSTEM.
System Response
The function module delivers the following error message:
Field "" is unknown. It is neither in one of t
Procedure
Check the definition of the global conversion rule for an InfoObject
What does this error mean? We are using BI 7.
Thanks
RKR

I have around 9 source systems, do I have to maintain data for all of them for 0SOURCESYSTEM?
I set data for CRM system and then tried to activate.. but still I'm getting same error.
I;m getting this warning too...
InfoObject 0FISCVARNT needs to be in key for DataStore object C_0SAL_D
Message no. RSDODSO123
Diagnosis
Characteristic 0FISCVARNT is included in the data part of ODS object C_0SAL_D.
System Response
The fiscal year variant cannot be used in the update rules for calculating business hour characteristics.
Does this matter???
Thanks
RKR
Message was edited by:
RKR M

Maintain -- 0soursystem text ???

Hi,
Req:
-- To show the source system values for 0soursystem for restrcting / filtering in the query
-- To show 0soursystem text
Situation:
We use one flat file source system FLT1 to load data of 3 different systems. So we use only one logical system 0logsys BW_FLT. But the transaction data contains the 3 sourcesystem ids (SR_FLT1, SR_FLT2, SR_FLT3) updated from the update routines and assigns 3 different source systems ids. When the query is run SR_FLT1,2,3 has text description as 'Source Systme No Longer Connected'. Added to that SR_FLT1, SR_FLT2, SR_FLT3 do not appear for filtering/restricting the values. We have to show the text for source systems.
Observation:
-- cannot maintain the text for infobject 0soursystem
Possible Reason:
Source system text is directly picked up from logical system descriptions from the RFC connection details.
Possible solutions:
-- create a logical systems for the SR_FLT1, SR_FLT2, SR_FLT3 and therefore the text and values would appear in the query restrictions/filtering
-- add another infobject to represent SR_FLT1, SR_FLT2, SR_FLT3 source systems. So that the text can be maintained as a regular infobject. And the values would appear in the restrictions.
Wondering if there are any other possible solutions for this scenario. Pros and cons of the above solutions.
What would be the effect for not using the 0soursystem and using the custom infobject to represent the source system.
Are there any OSS notes regarding this scenario.
Any suggestions is highly appreciated.
Thanks,
Sandya

Hi,
I would use a seperate InfoObject to store these values, because 0SOURSYSTEM refers to table TBDLST as text table, which contains the text for logical systems and can not be changed

Problem with mapping 0SOURSYSTEM and 0LOGSYS in BI7.

Hi,
Can anyone tell how to map 0SOURSYSTEM and 0LOGSYS in BI7. I have these two fields in my DSO and get it populated from the Datasource. To which fileld in the datasource can i map these fields or what routine should i write?
In BW3.0 we used to just include these fields in the transfer structure of the infosource and it used to get automatically mapped in the communication structure. But in BI7 since we are not using infosource we cannot do it.

hi,
chk using this in transfer routine
PROGRAM CONVERSION_ROUTINE.
Type pools used by conversion program
TYPE-POOLS: RSD, RSARC, RSARR.
TYPES: DE_0LOGSYS(000010) TYPE C.
Conversion rule for InfoObject 0LOGSYS
    Data type       = CHAR
    ABAP type       = C
    ABAP length     = 000010
FORM CONVERT_0LOGSYS
USING    RECORD_NO LIKE SY-TABIX
           SOURCE_SYSTEM TYPE RSA_LOGSYS
           IOBJ_NAME TYPE RSIOBJNM
CHANGING RESULT TYPE DE_0LOGSYS " InfoObject value
           RETURNCODE LIKE SY-SUBRC.
$$ begin of routine - insert your code only below this line        -
IF RESULT IS INITIAL     and
     IOBJ_NAME = '0LOGSYS'.
fill source system
    RESULT = SOURCE_SYSTEM.
ENDIF.
$$ end of routine - insert your code only before this line         -
ENDFORM.
Assign Points if useful
Ramesh

RSEC_MIGRATION auth conversion problem; 0SOURSYSTEM

I ran the RSEC_MIGRATION program on our system but the
analysis Authroizations based on the technical object 0SOURSYSTEM did not convert. I also receive the message that "not all InfoObject could be read" upon executig the program. Is this an error with the program itself

ChojinDSL wrote:Do you have a firewall running on that server?
Are your clients also using systemd?
Yes I do have a firewall, iptables, and it's the same configuration from before the migration to systemd. Also note that I can access the shares when explicitly defining the path whether that's in a File Manager, cli or other so access isn't being blocked. For lack of a better explanation the whole thing gives the appearance that although the Share is active it's just not broadcasting it's existence like it should be.
I have two PC's, both Arch, one with Openbox and one running KDE that I have migrated to systemd. Both can access the Share when the path is explicitly defined but don't see it when trying to just browse for the the Share. I have a Xoom tablet, running Android Jelly Bean, that exhibits the same behavior. I also have two media players, one an older WD LiveTV Plus model the other a newer WD LiveTV model, neither of which can see the share and browsing is the only option for those devices. So I've got a pretty good assortment of devices and operating systems that could see the share when browsing previously but can not see the same share by browsing since the migration to systemd on the file server.
Thank you.

How to delete multiple InfoObjects in one shot?

Hello Experts,
Is there any way to delete a bunch of InfoObjects / ODSs in one shot?
Scenarios:
1. We have thousands of custom IO which are no use any more and we want to get rid of these IO to save space. How to do it?
2. We have thousands of custom ODS too which need to be deleted. We want to delete ODS which are not used any more and also the InfoObjects in ODSs which are not used by any other ODS or any other places. How do I do that in one shot?
BTW way our BW is 3.1 version but will be upgrading soon.
Regards,
Mau

Hi,
goto RSD1 and mark the option "Free Selection of IObjs"
Hit the Maintain button In the next screen Select your IObjs to be maintained (at this stage the system will lock the selected IObj !!)
In the next screen mark the IObjs you want to delete
Then Menu Characteristics / Delete (shift + F2)
this should work.
Alternatively, try developping an ABAP based on function module RSDG_IOBJ_MULTI_DELETE.
hope this helps...
Olviier.

Concatenation of Data from 4 infoobjects into a single cell in Bex Report

Hi,
I have loaded ODS with the description data. The source system for loading the ODS is the flat file. The ODS data should be a replica of the flat file.
In the flat file, there is a description field corresponding to a particular ID. This Description is greater than the standard 60 char length. So, I had to split the description while loading the flat file using single line routine in the Transfer Structure.
So, while loading different the data, I split the description field data from the flat file into 4 infoobjects and the flat file data was loaded into the ODS.
Now, from the reporting point of view, I need to display the entire description data from the 4 info-objects into a single cell in the Bex report.
Please suggest a solution for this.
****Points will be awarded***

Hi Vineet,
Thanks for the response.
Could you please help me out with the VBA script(code) that needs to be written in the macro.
Thanks in Advance.
****Points will be awarded****
Regards,
Hitesh Shetty.

Error while assigning constant to infoobject in open hub transformation

While assigning constants(in rule details) to infoobject in a transformation in a open hub I am getting an error "The Object Name is not allowed to be empty"
Can anyone tell my why this is happening? What should I do now?

Hi,
In the transformation, have you connected that rule to any target field of your destination? If not, then do that and then try to create the routine.
Regards,
Vaibhav

Error while activating all inactive infoobjects in DEV

Hai
Im trying to activate all inactive infoobject by using program RSDG_IBOJ_ACTIVATE. But it says the following error
System error in lock management
Message no. AD025
Diagnosis
A system error has occurred in the lock management function.
The system was unable to determine whether a lock entry existed for the selected object.
System Response
The selected object could not be locked.
Only display mode can be used.
Procedure
Make a note of the error code and inform your system administrator.
why it is like this
how can i activate all inactive infoobjects in development server.
kumar

Hi,
It seems objects are locked in transport request. Check the 'object directory entry' for the object and find out the transport request/task under which objects are locked. Remove the objects from TR or release the request and then try to activate.
Hope it helps.
Regards,
Aditya

MASS CREATION OF INFOOBJECTS IN BI 7.0

Hello Gurus,
Here is my scenario:
we have more than 100 new Z fields in R/3 (Tables: KONV, KONP, VBRP) and we are populating those. We maintained the Datasources with that fields. Now we need to develop new infoobjects in BW for those Z fields. Is there any possible way for mass creation of infoobjects.
I searched about this, but most of them were used only for 3.5 data source.(eg: CTBW_META - transaction for mass creation of infoobjects in bw 3.5)
Please anyone help me in solving this !
Thanks in advance .

Hi,
One option I thought of, but never applied in practice. Create an excel with all the field related information in the structure of table,
RSDIOBJ Directory of all InfoObjects
RSDCHABAS Basic Characteristics (for Characteristics,Time Characteristics, and Units)
*RSKYF Key Figures
RSDTIM Time Characteristics
RSDUNI Units*
And upload this table with the flat using function module etc.
But then you would need to update below tables to with relevant details.
RSDIOBJT Texts of InfoObjects
RSDIOBJ Directory of all InfoObjects
RSDIOBJT Texts of InfoObjects
RSDATRNAV Navigation Attributes
RSDATRNAVT Navigation Attributes
RSDBCHATR Master Data Attributes
RSDCHABAS Basic Characteristics (for Characteristics,Time Characteristics, and Units)
RSDCHA Characteristics Catalog
RSDDPA Data Package Characteristic
RSDIOBJCMP Dependencies of InfoObjects
RSKYF Key Figures
RSDTIM Time Characteristics
RSDUNI Units
Edited by: Parth Kulkarni on Jun 22, 2011 4:56 PM

SAP R/3 Fields to BW InfoObjects Mapping Documentation

Hello everyone,
As a newbie, one of many challenges that I face is to map SAP R/3 fields to its corresponding InfoObjects in BW. I've learned that we can run transaction SE11 and view table RSOSFIELDMAP, in order to know the mapping between OLTP Source Fields and InfoObjects.
However, there are many fields that have not been mapped in this table, like PAYR-CHECT, PAYR-ZBNKN and PAYR-ZBNKL, to name a few.
So I just wonder, has anyone out there compiled this mapping into a document or published it on any web site?
Appreciate if you could let me know about this.
Thanks!

Hi Fulham,
In help.sap.com, you can check out the datasource and the fields mapped from which table. Just check the business content section.
eg. http://help.sap.com/saphelp_nw04/helpdata/en/7a/c3143c26b8bc00e10000000a114084/frameset.htm and click on any of the available links under datasource.
I find this extremely helpful when I need to find out the objects and the tables. Hope this helps.
Cheers,
Gim
Message was edited by: Gim Lee Koh

Overwrite data of master data infoobject

Hi all,
We have one master data infoobject ZASRYHMA. This infoobject does not have any attrbiutes but it has two compounding fields ZSITE and 0DISTR_CHAN.
Now customer has a requirement in which value of ZASRYHMA can change for a particular site and distribution channel. Generally if this value changes then system creates a new entry in tables /bic/pzasryhma and /bic/szasryhma.
What they want is to overwrite the existing entry.
Is it possible to achieve? It's a master data infoobject.
Please provide your kind help.
Regards,
Nilima Rodrigues

Hi,
You have three fields as key field in table as shown below along with values,
ZASRYHMA     ZSITE         0DISTR_CHAN
A-1                     B-1            C-1
A-2                     B-2            C-2
now if you want to change the value of say second row to
A-3                    B-2             C-2
right?
This is not possible just by overwritting in the info-object master data. Because these are key-fields system will treat A-3 as new value and create new entry, on top of this your A-2 master data values must have been used in transactional data.
Only way I can think of is to delete the transactional data where ever A-2 is used and then delete ZASRYHMA master data and then upload master data for ZASRYHMA with new values. And then transacional data.

Unable to provide input value to InfoObject in SEM-BCS

Hello BI Experts,
I have created an infoobject 'ABC' in BI and have flagged 'With Master Data' and 'With Text'. This infoobject has an navigational attribute 'XYZ'(XYZ also has 'With Master Data' and 'With Text').
When I go to T.Code UCWB(BCS Workbench), I could able to see the infoobject 'ABC' and when I try to create master data for 'ABC', I do not see the input field for 'XYZ'. I want to input values in Infoobject 'XYZ' through this screen(SEM-BCS) and not through BI(right-click on infoobject 'Maintain Master Data). Please let me know, if I am missing anything.

Hi Shekar
I find the ICD setup very 'picky'! If you get one thing wrong, it doesn't work. I have detailed below the steps I usually advise people to tek. Check your setup and see if this helps.
1. Define Plan Type, Compensation Category = Others.
2. Define Plan. Link to Plan Type. Plan Usage = May not be in program. On Not in program Tab - define sequence, currency, enrollment rate (per pay period?), activity reference period (Monthly). Your settings may need to be different. On Plan details tab, enter plan years.
3. Plan enrollment requirements. On the general tab, plan sub tab, make sure the method = EXPLICIT. this allows the user to enter an input value for the ICD. THIS MAY WELL BE THE SOURCE OF YOUR PROBLEM!
Make sure the CERTIFICATION region is UNTICKED. This can also cause ICDs not to work.
ALLOWS UNRESTRICTED ENROLLMENT must be TICKED. Otherwise there is no eligibility to the ICD.
On the rates subregion, make sure the run strt date is set to ENTERABLE.
4. standard Rates form. Make sure the ACTIVITY TYPE and TAX TYPE are entered. Select the ELEMENT and the INPUT VALUE and TICK the ELEMENT AND INPUT VALUE REQUIRED field.
On the processing Information tab - TICK ASSIGN ON ENROLMENT, DISPLAY ON ENROLLMENT and PROCESS EACH PAY PERIOD. Enter PER PAY PERIOD AMOUNT in VALUE PASSED TO PAYROLL and OTHER in COMPENSATION CATEGORY.
Let me know if this works!
Regards
Tim

Unable to generate "Export data source" for Master data infoobject

Hi Gurus,
I'm in BW 3.5
I need to generate "Export data source" for a master data info object.
I followed below steps:
I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource was successful"
Problem:
Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
Could anyone please help ????
Thanks,
Venkat

Hi Venkat,
I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
-Vikram

0SOURSYSTEM InfoObject

Similar Messages

Maybe you are looking for