0STARTLEVEL Activation

Hi all,
In a brand new BW system I activated some datasources from business content, loaded CO-OM transactional and master (including hierarchies) data from R/3. When I created my custom objects with hierarchies, during an attempt to assign source system to an infosource I've got an error which said that my datasource for hierarchy had an inactive 0STARTLEVEL object. The system proposed to activate 0STARTLEVEL. I tried it, but couldn't find this infoobject in business content. RSDIOBJ shows that 0STARTLEVEL exists in D-version. How and where can I find and activate this object?
Thanks in advance.
Eugene

Hi,
I can't find it in RSD1 in our dev system, but I don't get the error message RSAOLTP 236 (0STARTLEVEL inactive).
But when I try to asssign a file system data source to 0CUSTOMER in our qa system, I get this error.
It doesn't exist in the qa system either (tried RSD1).
Any suggestions?
Thanks.

Similar Messages

0STARTLEVEL problem

Hello My guru friends
In the activation of the infosources 0FUNCT_LOC and 0GL_ACCOUNT i can´t activate because the system error send my this message 0STARTLEVEL object is not i active version, i went to BCT area to activate it and it don´t exist what dou you know about that.
Whit best regards
AGT

hi AGT,
there is sap oss note for this, take a look and try the solution proposed. hope this helps.
663945
BW-BCT-FI: Transfer rules for 0GLACCEXT InfoObject   Help
    SAP Note Number      Note Language    DEEN    Display Versions    1
Print      SSCR      Download
Text Header Data Release Correction Instructions Support Packages >>
Symptom
BW Release 3.2 Content delivers the 'Balance Sheet and Profit and Loss' scenario.
The most important objects in this context are the virtual InfoCubes
0FIGL_VC1 - General Ledger: Balance Sheet and Profit and Lossand
0FIGL_VC2 - Cost of Sales Ledger:Balance Sheet and Profit and Loss
as well as the following queries, which are based on them
0FIGL_VC1_Q0001 - Balance Sheet and P&L: Actual/Actual Comparison and
0FIGL_VC2_Q0001 Balance Sheet and P&L (Cost-of-Sales Acc.): Actl/Actl Comparison.
When you activate the dependent content for the two queries (using the grouping: In Data Flow Before), the transfer structure and the transfer rules for hierarchies for the 'Balance Sheet/P&L statement item' InfoSource (0GLACCEXT) are missing.
Other terms
0GLACCEXT
Reason and Prerequisites
For technical reasons, we cannot currently deliver transfer rules for hierarchies. You must create themmanually after you activate the Content.
<i><u>Solution
Call transaction RSA1 (BW Admin. Workbench >> Modeling >> InfoSources).
You can find the 0GLACCEXT InfoObject (Balance Sheet/P&L Statement Item) in the InfoSources tree under the FI-IO application component (Master Data Financial Accounting General).
Connect your SAP R/3 source system using the "Assign DataSource" function in the context menu for the 0GLACCEXT InfoObject. Select the 0GLACCEXT_T011_HIER DataSource.</u></i>
Segment Hierarchy Header
Source system:   xxx (your assigned R/3 source system)
DataSource:      0GLACCEXT_T011_HIER   Balance Sheet/P&L Statement Item
Transfer method: PSA
Transfer rules tab page
InfoObject >> Field Assignment
InfoObject Description      Field
0HIENM        Hierarchy name    HIENM
0HIER_VERS    Hierarchy version VERSION
0DATEFROM     Valid-from date   DATEFROM
0DATETO       Valid-to Date     DATETO
Communication structure/transfer rules
InfoObject   Description       Tp Rule
0HIENM        Hierarchy name      TS   0HIENM
0HIER_VERS    Hierarchy version   TS   0HIER_VERS
0DATETO       Valid to            TS   0DATETO
0DATEFROM     Valid from          TS   0DATEFROM
0NORESTNODE   Non-assigned nodes X    -
0STARTLEVEL   Start level         X    -
0NODEPOSIT    Node position       X    -
0ALEAFNODSP   Leaf node display   X    -
0ALEAFNODCH   Display changeable X    -
TS means transfer "Field from transfer structure".
Segment Hierarchy Nodes
Source system:     xxx (your assigned R/3 source system)
DataSource:      0GLACCEXT_T011_HIER   Balance Sheet/P&L Item
Transfer method: PSA
Transfer rules tab page
InfoObjekt >> Field Assignment
InfoObject Description               Field
0HIER_NODE Name of the hierarchy node NODE NAME
0DATEFROM   Valid-from date             DATEFROM
0DATETO     Valid-to date               DATETO
0GLACCEXT   BS/P&L item                 GLACCEXT
0SIGNCH     Sign change                 RSIGN
0BAL_DEPEND Aggregation of balance sheet item: PLUMI
            Balance-dependent
Communication structure/transfer rules
InfoObject    Description      Tp     Rule
0HIER_NODE      Hierarchy node     TS    0HIER_NODE
0SIGNCH         Sign change        TS    0SIGNCH
0BAL_DEPEND     Balance-dependency TS    0BAL_DEPEND
0GLACCEXT       BS/P&L item        TS    0GLACCEXT
TS means transfer "Field from transfer structure".
Now activate the 0GLACCEXT InfoSource.

Error while activating a routine "no object list"

hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
Nishant

Try running program RV80HGEN.
Regards,
Naiimesh Patel

Malicious or not? Message popped up: Mozilla security found (something like too much, forget exact word) activity on your computer so it will do a fast scan of system file. With OK button.

I was looking at youtube.com, which always tells me my browser is not supported and recommends I download Firefox, but that is what I was using, so I went to Firefox to check for updates. (I think I also had freecycle.org open.) Then this message popped up in a new page: Mozilla security found (something like "too much", forget exact word) activity on your computer so it will do a fast scan of system file. There was an OK button. The page address was: http://update17.stegner.ce.ms/index.php?Q7Lhl9ShbRxGJXpkM1VLSi4ZE8H4pTedoVPySgeppM3VpC+thEspcFG7qxHgn1pdsC2h5ygPGWI3t5hXqMzL9EQaZZ3J1e3CKXgCb0Qp. I did not click OK but copied the link and closed the window which closed the internet. I have never seen this before and would like to know if it is really Mozilla or possibly something malicious. Thank you.

Good catch. That almost certainly is an invitation to download malware.
There are a lot of infected web sites pushing "fake antivirus" software. If you have any doubts about whether your system might have become infected, you can supplement your regular security software with these two highly regarded scanners:
Malwarebytes Anti-malware : http://www.malwarebytes.org/mbam.php
SUPERAntiSpyware : http://www.superantispyware.com/

Error while Activating update rule in BW

Hi,
I am getting an ABAP dump while activating an update rule. The rule is from DSO to cube.
"MESSAGE_TYPE_X" " "
"%_T020N1" or "%_T020N1"
"INSTANTIATE"
I have added some new fields in a DSO. The rule is from DSO to cube. While activating it, I am getting this ABAP dump. There are few other rules from this DSO to other DSO which got activated but this one is causing dump.
Any ideas/suggestions on this would be really helpful.
Thanks,
Naveen

Hi
Check if your Cube , DSO and UR's are active. If not reactivate them. Ideally you could recreate the UR's and check the status by running the extraction.
I would also recommend to use elimination method to check if any particular field is creating an issue. While recreating the UR's , create them for a few fields - active - check extraction - this will also let you know if the issue is within any oif the rules.
Cheers
Umesh

SharePoint Foundation Active Directory Problem

Hey,
I have a problem with the Active Directory connection to SharePoint Foundation.
My Situation looks like this:
I'm working on a kind of project controlling plattform. Each of our customers has its own site. Also each customer has an account in our Active Directory. For the administrative part, we have a list which contains some infos of the customer, the url to its
site and the contact person.
I wrote an import-script which creates a site and a new item in the list. To put the contact person in the list-item, I use a code-snippet like this:
try
user = web.EnsureUser(loginName);
catch (Exception ex)
throw new Exception("LoginName " + loginName + " not found");
Now the problem is, that the try/catch block fails too often which means: SharePoint doesn't know the loginNames of some of our customers.
Why does SharePoint not know maybe 1/5 of all our customers? All of them have an account in our active directory, none of them ever logged in the SharePoint (at the time they even doesn't know, that they have a SharePoint site for this project).
I searched the internet for the problem but all I found where questions related to the synchronization of ad-properties to SharePoint Foundation. But I don't want to sync the phone-number or something like that - I want SharePoint only to know all the loginNames
of our customers, not only 1/5 of them.
How do I achive this, what am I doing wrong?
Thank you!

web.EnsureUser has nothing to do with the UPS at all. This has nothing to do with synchronisation (it does have a role but it's a maintenance one and nothing to do with authentication.
The simplest answer is that the login names are being entered wrongly. Having said that there are a few areas you can look at to try to identify the problem:
Does it fail repeatedly for the same username? Can you add that user to the site manually using a people picker control and if so will the script work afterwards? Are there any trends in the user accounts that SharePoint cannot find?

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost". I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service. Is there something I should do to my IPAD? I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions). I don't know what to do next. My IOS version is 6.1.3. I did go into Network from the general tab and I see it says "SIM not provisioned". HELP and Thank you in advance.

Hello Theresa818,
Thank you for using Apple Support Communities!
It sounds like the cellular data will not activate for some reason on the iPad.
I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
Check for a carrier settings update.
Update your iPad.
Toggle the Cellular Data setting off and on under Settings > Cellular Data.
Restart your iPad.
Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPad as new.
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
I know you may have done one or two of the steps here, so you can skip those.
Take care,
Sterling

Customer activity

Where in SAP can I see all the transaction activity for a particular business partner? Open and closed transactions...invoices, credit memos, payments etc...etc...

Hi,
Exactly as Gordon directed but will want to add that when you drill down to the BP Account balance the transactions you will see by default would be the Open transactions created from the "Posting Date From" specified. As such, you will have to define the number to transactions you wish to view and the also indicate if you'll want to see reconciled transactions.
Thank you.
John

Report Performance Issue - Activity

Hi gurus,
I'm developing an Activity report using Transactional database (Online real time object).
the purpose of the report is to list down all contacts related activities and activities NOT related to Contact by activity owner (user id).
In order to fullfill that requirment I've created 2 report
1) All Activities related to Contact -- Report A
pull in Acitivity ID , Activity Type, Status, Contact ID
2) All Activities not related to Contact UNION All Activities related to Contact (Base report) -- Report B
to get the list of activities not related to contact i'm using Advanced filter based on result of another request which is I think is the part that slow down the query.
<Activity ID not equal to any Activity ID in Report B>
Anyone encountered performance issue due to the advanced filter in analytic before?
any input is really appriciated
Thanks in advanced,
Fina

Fina,
Union is always the last option. If you can get all record in one report, do not use union.
since all records, which you are targeting, are in the activity subject area, it is not nessecery to combine reports. add a column with the following logic
if contact id is null (or = 'Unspecified') then owner name else contact name
Hopefully, this is helping.

Activity Report download is saved without extension and unreadable

Hello,
The Portal Activity Report iView has a button which enables the user to download the report to his PC.
The problem is that when the user clicks on that button and saves the file it is being saved by this default name: com.sap.portal.activityreport.frontend.DownloadableActivityReport
The main problem is that it is being saved by default without any extension and after saving the user needs to manually add the .xls suffix.
Another problem is that once I open the report with Excel The Object Name column is unreadable.
Is there any way to resolve these issues?
Roy

Hi Roy,
> if it wasn't supported there
> or you would still consider it as a bug?
The feature in general of course was supported, but what I cannot say is if it was a known issue that it didn't work correctly. As I dont't use the ActivityReport, I also have no experience if it didn't work at some time and maybe now is working.
The wrong filename I don't expect to be corrected in the meanwhile, as said, that's a problem in some places. So at least for this you could open an OSS message. And maybe combine this with the problematic column issue.
But if upgrading to SP18 would be an option for you, maybe you could first test that.
Hope it helps
Detlev

How can I use Active Print on my Ipad and print to my usb connected HP officejet 6110 all in one

I was previously able to use Active Print on my Ipod to print to my usb connected HP officejet 6110 all in one. Now, however, with my Ipad version 2 I can no longer get this to work. Can anyone help? Thanks.

Hi,
HP do not provide any USB connection solution for iOS.
As Active Print is a 3rd party application which provide this functionality, i believe you may find a better help within Active Print support as they more familier with their application requirement and functionality:
http://www.activeprint.net/support/
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How can I get an Active Direcotry account to show at login screen

I've just Binded a computer to our Active Directory network, and when I log off, I only see the local account listed at the login screen, and it takes 5-10 seconds before the arrow comes up that lets me choose Other.
I want to be able to list the Active Directory account that the user should login with, is there a way to make it stick at the login screen?

You can add extra empty toolbars if you want to see more of the persona.
You can create extra toolbars to get extra space via "View > Toolbars > Customize" or "Firefox > Options > Toolbar Layout"
You have to put something on a toolbar (drag a Space item onto it) before closing the Customize window because empty toolbars are automatically removed.

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs?

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs? My apple ID is my Yahoo mail it self, but not able to log in to Icloud, Can any body guide, Why, I can not.

Hi dip_kinu,
I apologize, I'm a bit unclear on exactly what device you are trying to set up and what is happening when you try to do so. If you are having issues remembering your Apple ID, or feel like you may have set up multiple Apple ID's, you may find the following page helpful:
Apple - My Apple ID: Find your Apple ID
https://iforgot.apple.com/appleid
Regards,
- Brenden

How can I render an active link (yrl) within a UIX/XML page

How can I render an active link (url) within a UIX/XML page.
How can I get <jbo:ShowValue> to work in UIX/XML, or is there another way?
Bill G...

It may seem strange, but the <contents> of <rawText> aren't actually
raw - it's only the "text" attribute that's raw. (It seems strange because
it is. Ah well.) This is different from UIX JSP.
So, try something like the following:
<bc4j:attrScope name="Notes">
<contents>
<rawText text="<a href=""/>
<rawText>
<boundAttribute name="text">
<bc4j:attrProperty name="value"/>
</boundAttribute>
</rawText text="">"/>
Some text in the link.
<rawText text="</a>"/>
</contents>
<bc4j:attrScope>
Thankfully, this will be much simpler in 9.0.3, when the following
will work:
<link text="Whatever you want">
<boundAttribute name="destination">
<bc4j:attrValue name="Notes"/>
</boundAttribute>
</link>

How can I change the active iCloud account in my Mac

My doughter set up the cloud in my mac, but she used her apple id. Now I cannot change the icloud active account from hers to mine. What can I do?

Click the apple >> system preferences >> iCloud >> sign out. Then sign back in with the desired apple id. Some data will be removed when you sign out. You can export data you want to keep first, sign out, then reimport. If it's just your daughter's info, then this probably won't matter to you.

0STARTLEVEL Activation

Similar Messages

Maybe you are looking for