0VENDOR_ATTR: No data coming through for the field VBUND(trading Partner ID
Hi Friends,
I am working on Fi-AP line items for trading partners in BW. Trading Partner ID is a attribute of 0Vendor_attr datasource but it is not pulling the data for it. The field name is VBUND. In BW this field is mapped to 0COMAPNY. I want to use 0PCOMPANY in BW for trading Partner whi is referenced with 0COMPANY.
Please advice why 0Vendor_attr is not pulling the data for VBUND.
Thanks,
SB
Hi Rajesh,
thank you for your answer. I am not familiar with field exits and had not thought about it.
I found this link on the forum : http://www.sapdevelopment.co.uk/enhance/fexits.htm that gave me additionnal info on field exits.
I will have a look on monday to see if it solves my issue, but it seems to be a very suitable solution.
I'll reward your answer as soon as I know wether it solved my problem or was only helpful :).
Thanks a lot.
Regards,
Damien.
Similar Messages
-
Ive tired deleting the app and reinstalling it but its not any different
For help with 3rd party apps, contact the app developer.
-
Table name for the field FAEDT(net due date)
hi every body,
plz can any body tell me the table name for the field net due date(FAEDT).
its very very urgent
thanq.Hi mark chalfen,
thanq very much ur reply.
actually my client want to change the payment term for all the vendor invoices.so wt we did is... we created aprogram to change the old payment term to new payment term in the vendor line items(fbl1n).
when we run the program its changing the payment term and the base line date and the NO of days in the vendor linitems.but it not changing the net due date based on the new baseline date.
i think with out changing the net due date only changing the payment term is use less.coz the item again show as due in the same date.
so how can we change the net due date based on the new baseline date.?from which table we can take the field FAED and update with the new date.
plz advise me?
thanq. -
Text data source for the field Position(PLANS)
Hi Experts,
I have an infoobject ZPOSITION which i am using in a cube for this i can able to display key values but i want to display text for this ZPOSITION. The source for this field is Position(PLANS) which i have tacken from pa0001 table.
I have an another infoobject 0HRPOSITION for this i have already loaded data using data source 0HRPOSITION_TEXT.
Is there any other text datasources for this field Position(PLANS)?
And
Is it possible to load data from one info object to another info object?
Regards,
Sridhar.KHi Sridhar,
Check out in the infotype PA0001 for the check table for this field. In this table you will have the description for the field PLANS (Position).
I request you to catch hold of functional HR team member to know where the text value for the Position (PLANS) is stored. You can get the info from them immeadiatly.
After knowing the table where the text values for Position (PLANS) are stored, you have to create a text datasource using RSO2 transaction and replicate in BW and load data from the R/3 table.
Hope this helps you.
Regards,
Saravanan. -
Which Master data Source is available for the field VBUK-GBSTK (Doc Status)
Hi
Which Master data Source (Attr) is available for the field VBUK-GBSTK (Document Status).
Please help me.
Thanks
Mannev.Hi
Thanks for your reply.
That is Transaction data source. I want master data source.
Thanks,
Mannev. -
Which Master data Source (Attr) is available for the field VBUK-GBSTK
Hi
Which Master data Source (Attr) is available for the field VBUK-GBSTK (Document Status).
Please help me.
Thanks
Mannev.Hi Mannev.
I don't think that you will find GBSTK in any master data source. It is however available in 2LIS_11_VASTH.
Hope it helps.
BR
Stefan -
Data not loading for new Fields InfoObjects from DSO to InfoCube
Hi Gurus -
I have a DataSource that is providing data to existing DSO then to Infocube. My client asked me to added couple fields to DataSource and get the data to DSO and then DSO to InfoCube.
Here is the Old scenarion: DataSource -> DSO -> InfoCube.
Here is the New Scenation:
DataSource ( Added new fields) -> DSO (added new InfoObjects for Corresponding DataSource FIelds) -> InfoCube( Added new InfoObjects to mapped from DSO)
I added the new fields to DataSource, added the corresponding InfoObjects to DSO and InfoCube.
I successfully loaded data from DataSource to DSO. Data is populating for the new Fields/InfoObjects in DSO.
But when I load data from DSO to InfoCube, I don't see any data for New Fields InfoObjects in the InfoCube.
Data from DSO to InfoCube is loading fine for the Old InfoObjects Fields but not for the New InfoObjects I added in InfoCube.
-SonaliHi,
Why dont u debug the load through DTP debugging and check what happens to the source field and target field once it passes through the transformation. You can easily trace back where the fields are becoming blank.
The loads which you have mentioned earlier did it have values in Added Records/Transferred Records column for the cube.
Regards,
Mani -
DTW error message - Data too large for the field65171
Am trying to run up General Legder Accounts using DTW in Version 8.8 and have been successful with Level 2. The customer has three levels only. The total number of characters for the various segments is 18 and I have double and triple checked that the column "Code" has exactly 18 characters. Even used "=trim" in Excel several times.
When I run DTW for level 3 it errors out and it displays the above error message. What is field 65171???
I thought DTW was supposed to be so much improved with 8.8 - where are help files that tell you what the errors are???
Regards - ZalHi ZAL,
I am facing this error too when exporting chart of account through DTW SAP 8.8 PL 19, although some of accounts are imported but in somme accounts saying the " data too large for the filed65171".
Account code is of 7, as it reuires 9 Max,
Please suggest me on this .
Regards
rps -
Validation failed for the field - Bill To Contact, Ship To Contact
Hi,
When I am trying to Import / enter order for a specific customer, i am getting the error.
VALIDATION FAILED FOR THE FIELD - BILL TO CONTACT
VALIDATION FAILED FOR THE FIELD - SHIP TO CONTACT
Has anyone got this error earlier? If you know the resolution, please update me on this.Hi,
I am getting following error when I an adding one customer address to another customer through Order Import Program. By populating 3 table values
1. OE_CUSTOMER_INFO_IFACE_ALL
2. OE_HEADERS_IFACE_ALL
3. OE_LINES_IFACE_ALL
Error Message:
Duplicate SHIP_TO ADDRESS found for IC_804810. Please correct the data.
Duplicate BILL_TO ADDRESS found for IC_804810. Please correct the data.
But its working fine when I am giving New address for existing customer.
Please help me on this....
Thanks,
Oracle Support. -
HI all,
in the report selection screen i have one field for which F4 HELP doesnt exits, even in the table for that field F4 HELP is not there but the user requests me to get the F4 HELP for that field in the selection screen .
please help how to get F4 HELP for the field
thanks in advance.The following are the options for F4 help
Code:
PARAMETERS: p_ccgrp LIKE rkpln-ksgru. "Cost Center Group
*Input help for Cost Center Group
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_ccgrp.
TYPES: BEGIN OF ty_ccenter_group,
setname TYPE setnamenew,
descript TYPE settext,
END OF ty_ccenter_group.
DATA: it_ccenter_group TYPE TABLE OF ty_ccenter_group.
CLEAR it_ccenter_group.
SELECT a~setname
b~descript
INTO TABLE it_ccenter_group
FROM setheader AS a INNER JOIN
setheadert AS b ON
asubclass EQ bsubclass AND
asetname EQ bsetname
WHERE a~setclass EQ '0101' AND
b~langu EQ sy-langu.
CALL FUNCTION
'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
ret field = 'SETNAME'
dynpprog = v_repid
dynpnr = SY-DYNR
dynprofield = 'P_CCGRP'
value_org = 'S'
TABLES
value_tab = it_ccenter_group.
F4IF_FIELD_VALUE_REQUEST:
This FM is used to display value help or input from ABAP dictionary. We have to pass the name of the structure or table (TABNAME) along with the field name (FIELDNAME). The selection can be returned to the specified screen field if three
parameters DYNPNR, DYNPPROG, DYNPROFIELD are also specified or to a table if RETRN_TAB is specified.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = table/structure
FIELDNAME = 'field name'
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNR
DYNPROFIELD = 'screen field'
IMPORTING
RETURN_TAB = table of type DYNPREAD
Getting F4 help based on other field .
Suppose if there are 2 fields on selection screen user name and Purchasing Document and the case is getting values of Purchasing Document Number based on user name
Code:
TYPES: BEGIN OF ty_match_nast,
objky TYPE na_objkey,
END OF ty_match_nast.
Data: it_match_nast TYPE STANDARD TABLE OF ty_match_nast.
Data: it_dypr_val TYPE STANDARD TABLE OF dynpread.
DATA: wa_dypr_val TYPE dynpread.
DATA: it_return TYPE STANDARD TABLE OF ddshretval.
Case when only username value is entered.
SELECT objky
FROM nast
INTO TABLE it_match_nast
WHERE kappl = c_ef
AND kschl = c_neu
AND usnam = wa_dypr_val-fieldvalue.
ENDIF.
*Read User name on selection screen field value
CLEAR wa_dypr_val.
REFRESH it_dypr_val.
wa_dypr_val-fieldname = 'P_UNAME'. "User name
APPEND wa_dypr_val TO it_dypr_val.
*FM to get the value
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
TABLES
dynpfields = it_dypr_val_h.
*Pass the values to f4 table
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = u2018OBJKY'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_EBELN'
value_org = 'P'
TABLES
value_tab = it_match_nast
return_tab = it_return. -
Searching for the fields of a table
Hi all,
for a material in mara, i am serching for the fields like
1) date of manufacture of that material
2)country where that material is manufactured.
i.e country of origin.
plz suggest me.
ur advice is higly appreaciated.
Regards
pabitraHi anvar,
Thanks for ur help.but ERSDA is the material creation date in SAP .it is not the actual manufacturing date.
just now i am searching for
1) the country of origin where the material (finish good) is created.
2)is there any field for waybill number?i want to display this in delivery order.
Thanks for ur time.plz suggest.(urgent)
Regards -
I have created a series of pdf schematics in a portfolio that revolves. For the field service techs I would like it to work on a smart phone or tablet. On the phones and tablet, they do not revolve. Any idea's? I am using Adobe Acrobat 9 Pro. It looks great and works as expected on my system, but the techs cannot scroll through the different prints.
Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions. -
In Bdc I have huge volume of data to upload for the given transaction
Hi gurus,
In Bdc I have huge volume of data to upload for the given transaction, here am using session method, it takes lots of exection time to complete the whole transaction, Is there any other method to process the huge volume with minimum time,
reward awaiting
with regards
ThambeSelection of BDC Method depends on the type of the requirement you have. But you can decide which one will suite requirement basing the difference between the two methods. The following are the differences between Session & Call Transaction.
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
Batch Data Communication (BDC) is the oldest batch interfacing technique that SAP provided since the early versions of R/3. BDC is not a typical integration tool, in the sense that, it can be only be used for uploading data into R/3 and so it is
not bi-directional.
BDC works on the principle of simulating user input for transactional screen, via an ABAP program.
Typically the input comes in the form of a flat file. The ABAP program reads this file and formats the input data screen by screen into an internal table (BDCDATA). The transaction is then started using this internal table as the input and executed in the background.
In Call Transaction, the transactions are triggered at the time of processing itself and so the ABAP program must do the error handling. It can also be used for real-time interfaces and custom error handling & logging features. Whereas in
Batch Input Sessions, the ABAP program creates a session with all the transactional data, and this session can be viewed, scheduled and processed (using Transaction SM35) at a later time. The latter technique has a built-in error processing mechanism too.
Batch Input (BI) programs still use the classical BDC approach but doesnt require an ABAP program to be written to format the BDCDATA. The user has to format the data using predefined structures and store it in a flat file. The BI program then reads this and invokes the transaction mentioned in the header record of the file.
Direct Input (DI) programs work exactly similar to BI programs. But the only difference is, instead of processing screens they validate fields and directly load the data into tables using standard function modules. For this reason, DI programs are much faster (RMDATIND - Material Master DI program works at least 5 times faster) than the BDC counterpart and so ideally suited for loading large volume data. DI programs are not available for all application areas.
synchronous & Asynchronous updating:
http://www.icesoft.com/developer_guides/icefaces/htmlguide/devguide/keyConcepts4.html
synchronous & Asynchronous processings
Asynchronous refers to processes that do not depend on each other's outcome, and can therefore occur on different threads simultaneously. The opposite is synchronous. Synchronous processes wait for one to complete before the next begins. For those Group Policy settings for which both types of processes are available as options, you choose between the faster asynchronous or the safer, more predictable synchronous processing.
By default, the processing of Group Policy is synchronous. Computer policy is completed before the CTRLALTDEL dialog box is presented, and user policy is completed before the shell is active and available for the user to interact with it.
Note
You can change this default behavior by using a policy setting for each so that processing is asynchronous. This is not recommended unless there are compelling performance reasons. To provide the most reliable operation, leave the processing as synchronous. -
Errors with the global conversion rule for the field 0SOURSYSTEM.
Hello Gurus,
We are implementing CRM Activities. I enhanced the data source and when I add new info objects to 0SAL_DS01 DSO and trying to activate I'm getting there errors. Can some one please help me out in this problem?
Error in global conversion rule for InfoObject 0SOURSYSTEM
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0SOURSYSTEM.
System Response
The function module delivers the following error message:
Field "" is unknown. It is neither in one of t
Procedure
Check the definition of the global conversion rule for an InfoObject
What does this error mean? We are using BI 7.
Thanks
RKRI have around 9 source systems, do I have to maintain data for all of them for 0SOURCESYSTEM?
I set data for CRM system and then tried to activate.. but still I'm getting same error.
I;m getting this warning too...
InfoObject 0FISCVARNT needs to be in key for DataStore object C_0SAL_D
Message no. RSDODSO123
Diagnosis
Characteristic 0FISCVARNT is included in the data part of ODS object C_0SAL_D.
System Response
The fiscal year variant cannot be used in the update rules for calculating business hour characteristics.
Does this matter???
Thanks
RKR
Message was edited by:
RKR M -
For abap-hr i need datatype and length for the fields which i selected
hi seniors,
I got one task for which i have to get the data type and length for the fields of a table in abap-hr. I am using dd03l table, but my team leader told me to not to use this. So, please anybody can help, i will be thankfull.
I have to select PA30 fields in which pernr and choic, subty and whatever i have selected the infotypes fields. If there is any function module to find data type and length or else any other table.
thanks,
sekhar.Hi,
Try using the Function Module "DDIF_FIELDINFO_GET". You can use this for fetching the complete details of a structure or, a specific field.
Input:->
TABNAME PA0001
FIELDNAME PERNR
Output:->
Check the DFIES_TAB it will contain all the details you need for the specific field.
Sample--->
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
TABNAME = 'PA0001'
* FIELDNAME = ' '
* LANGU = SY-LANGU
* LFIELDNAME = ' '
* ALL_TYPES = ' '
* GROUP_NAMES = ' '
* UCLEN =
* DO_NOT_WRITE = ' '
* IMPORTING
* X030L_WA =
* DDOBJTYPE =
* DFIES_WA =
* LINES_DESCR =
TABLES
DFIES_TAB = MY_DFIES_TAB
* FIXED_VALUES =
* EXCEPTIONS
* NOT_FOUND = 1
* INTERNAL_ERROR = 2
* OTHERS = 3.
Hope this was of some help.
Best regards,
Sagar.
Maybe you are looking for
-
Getting String values from a ".properties like" file
I'm finishing up my first servlet based application. I would like to get some of the error messages out of the code and into a file that will be read when the application is initialized -- much like one would use a .properties file in a Java program.
-
Standard text entry for Service line items using BDC
Hi, I want to enter standard texts for service line items of RFQ created using BDC, if it is a line item i can pass RFQ_number+line_item number as TDNAME in SAVE_TEXT function module, but for Service line item what value we need to pass in TDNAM
-
Drag and Drop via Data Control doesn't seem to bind input parameter.
Hi Everyone, I've followed the 'how to drag and drop a webservice data control' excercise in my current application to bring back complex data on the basis of one parameter(appId). However, when running the application, the server logs indicate that
-
Site Studio Publishing Utility fails with HTTP rsponse 403 for URL
Just installed Publisher with Subscription Client. The two pieces seem to work together until I start a replication. Then I get the following a number of times and it stops. [1]IOException: Server returned HTTP response code: 403 for URL: http://loca
-
I created a table at design time and binded data from model. I want to change tables first row to red color. I tried to change at design time but all rows colour are being changed. Can any one tell me how to do it?