0vendor is not displaying name attribute when I maintained master data.

0vendor is not displaying name attribute when I maintained master data.
Details: I have four records in the 0vendor infoobject (sand box). I have to show these four records to the client. As i have free hands I maintained master data in the name field and finally activated master data. But when I add the name attribute to the vendor charecteristic in the query designer; it is displaying name attribute as # . Any idea how to display the names of the four vendors in the zquery.
Also do you know the transaction to copy standard query to Zquery?
Thanks in advance.

Dear Les
For 0VENDOR, Set Property as Key & Text, try once again.
Yes, you can copy the standard query very well.
Open the Standard query & using SAVE AS, you can copy to "Z" queries.
Hope, now you will get some idea
Regards
Saravanan.ar

Similar Messages

Why cant I see an attribute when I "maintain master data"

Gurus -
Here is an easy question for you.
I added a new navigational attribute to an InfoOject. After I have loaded the data and activated it, I can't see the navigational attribute/values when I do a "maintain master data" when I display it via InfoObject. But, I can see the navigational attribute/values when I do a "maintain master data" when I display it via InfoSource. What do I have to do to see it when maintaining master data via the InfoObject option?
Thanks!

usually in maintain master data - it might be that the number of fields are too large and you are not able to see your field.... what you can do is to select a particular row with data and double click on it to see the data or go to options and user parameters and choose ALV grid display and it usually displays all the fields unless you are using a custom layout which does not have this characteristic included.
The easiest way to check out if the characteristic is available is to use the P table in SE16 and view the contents - this too if you do not have custom layout defined at the ALV grid level...

How to enable regex validation for display name attribute?

I need to put some control around the display name attribute (for all objects in the system). However, when I go to administration => schema management => all attributes => display name, I see the regular expression text field under validation
tab is disabled for display name. How can I enable this? I see there is already an MPR called "Administration - Schema: Administrators can change selected attributes of schema related resource" which is granting admins to change the schema of
the display name attribute, but it does not seem to help for the above scenario. Can someone please help?

Hi,
This is true for all attributes, not just Display Name. As long as an attribute has a non null value, you will not be able to change the regular expression of that attribute at the schema level.
I don't know if nullifying display attribute for all user objects (assuming you are talking about binding between Display Name and a Person/User object) is an option. If so, its worth considering.
If that is not an option, then assuming your data entry is coming from the FIM Portal and not any other external system like a custom portal, then you are ONLY left with regular expression validation at the RCDC level.
Thanks,
Jameel Syed |
Identity & Security Strategist | [email protected] |
Simplified Identity and Access Management

Phonebook not displaying names in groups.

Hi
I just got a new macbook pro and when I connected my iphone to it, it erased all my contacts. So I manually put them in but now instead of displaying them by letter, eg-A-NAMES,B-NAMES,C-NAME,D-NAMES. It just shows one single list of people.
Does anybody know what I can do to fix it.
Thanks
Aditya

It depends on if your iphone is not displaying your contacts alphabetically or is address book not displaying names alphabetically.
If it is the iphone, go to home screen > settings > phone and check the contacts section to see how the names are supposed to be sorted and displayed.
If you have the settings correct, try power-cycling or resetting the iphone.
Both shut the power down so you can turn back on. This link will help.
http://docs.info.apple.com/article.html?artnum=305740
If the reset does not resolve the issue, you might think about restoring the iphone. This link will help.
http://docs.info.apple.com/article.html?artnum=305744
If it is the address book that is having the issue, check the address book preferences to see how the names are supposed to be sorted and displayed.
If these are set correctly, you can rename your address book preference file.
To rename the file:
Make sure you quit out of address book.
Open finder and drag the following file to the desktop.
~\library\preferences\apple.com.AddressBook.plist
This will reset any preferences you have set in address book.
Hope this helps out.

Menu toolbar icons not displayed in colour when deployed on the Web

Hello!
We are developing an application using Forms6i on Windows NT.
Our problem is that menu toolbar icons are not displayed in colour when the application is deployed on the Web using lookAndFeel = generic. This is the case both when using Microsoft IE5 and Netscape 4.5. When lookAndFeel = oracle, however, the icons are displayed in colour.
The icons are stored as *.gif files in the same directory as the application *.html file. It does not help to create a virtual path /web_icons/ in the www listener and edit the parameter default.icons.iconpath in the file Registry.dat.
When running the application as client/server, the menu toolbar icons are displayed in colour as expected.
Any ideas on how to solve this problem?
Regards,
Kjell Pedersen
Nera SatCom AS
Norway
null

Hi,
I got the same problem and I didn't figure out, how to solve this problem.
But did you try to printout the form anyway? I guess you will see the icons on the printout, won't you?
Regards
Dirk

Query not displaying all records when execute it first tme

Hello,
i have an issue with the WEBI report.when i run the report first time it's displaying only few records, but when i run the same report second time it's displaying the more records and it's correct.
Could any one tell me why it's not displaying all records when i execute first time.
Thanks in advance for your help.
Regards,
Prathap

Which BOBJ version do you use?
Which kind of data source are you retrieving data from?
Regards,
Stratos

My I Pod touch 4th gen does not display as connected when I enter i Tunes

My I Pod touch 4th gen does not display as connected when I enter i Tunes, although my battery is being charged and my computer recognizes it, the problem persists. I have also tried the apple troubleshoot for this, but it hasn't worked.

What Apple troubleshooting did you try? This one?
iOS: Device not recognized in iTunes for Windows
B-rock

Read error when reading the master data of 0EMPLOYEE on demand, attribute 0

Hello All,
While loading data for HR data source 0HR_PA_OS_1 i am getting the below error message..
Error 1 in update.
Read error when reading the master data of 0EMPLOYEE on demand, attribute 0COMP_CODE
Please let me know how can it be resolved.
Regards
Rohit Parti

The problem occurs during data load from R/3. It was not occuring before. When I go to check the PSA contents I get a runtime error - GETWA_NOT_ASSIGNED.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32821).
This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.

Attribute Change Run VS Master data activation

hello guys
I just want to know whats the difference between 'Attribute Change Run' and Master data Activation...For me,both seem to serve same purpose.......in which scenarios do we use them?
Thanks and Regards
S

Hi S,
Although they seem to be the same there are differences.
Master Data activation.: When you load master data, they are loaded as D or M versions. Check the table as /BI0/P<infoobject tech name> , you will see different versions, if you have not activated your master data yet.
Note : If you are checking for SAP standard objects, drop the 0 eg table for 0MATERIAL would be /BI0/PMATERIAL.
When you activate master data, all D and M versions of records get transferred into A or active versions. So after activation, you should not find anything other than A versions.
ACR: The use of an ACR is two fold. 1st use is that it performs the same action as a master data activation automatically.
The 2nd function, is that it realligns the aggregates for the changed attributes
let me give you an example.
You have an aggregate based on material group which is an aggregate of material.
Consider that you have a material X which initial belonged to group A.
The aggregate would look like this
Material Material Group Keyfigure
X A 100
Now you change the material group of the same material as B
The aggregate would not change automatically....ie it would still be X A 100
To realign the aggregate,you use an ACR. After running an ACR, the aggregate would look like
X B 100
Hope this helps.
Regards.

Field not visible in maintain master data option

Hello experts,
maturity_date field is mapped and active in transformations.
but when i want to see data for it.
field not available in "maintain master data" option or "display data" option.
regards,
kv

you can search in se11 /bic/pmaturity_date.
and also is attribute only is checked in general tab.
bhaskar

Dumps when trying to Maintain master data

Hi All,
When we are trying to Maintain master data for a master data object 0WBS_ELEMT, we are getting a short dump "CALL_FUNCTION_NOT_FOUND" in our BI 7.0 system.
What we are doing is Right click on 0WBS_ELEMT info object and Maintain master data, then we get the above dump. Saw in one of the forums that by making the info object in active and activating it again it will solve the issue but even after doing this the issue still persists, we still get the dump. Would need help from all of you.
regards,
Suman Pitta

Hi Suman,
The dump is due to the fact that 0WBS_ELEMT has an attribute which still
uses the POSID conversion exit. Attribute 0PROG_POS should use
conversion exit POSBW. And in fact, in RSD1 of this infoobject, POSID is
Still maintained. However, if you go to the DDIC object in SE11
(SE11 -> choose "Domain" -> /BI0/OPROG_POS -> Display), you will
see that the conversion routine POSID still appears. This is the reason
you get the dump.
In order to resolve this issue, go to RSD1 -> enter infoobject
'0PROG_POS' -> choose maintain -> Set object status to inactive and
reactivate the InfoObject. The reactivation should regenerate the DDIC
objects (you can check this in SE11 again).
Alternatively change to the version from content which utilises POSBW
already.
regards,
Colin

Is it normal that the DataSource field is blank when opening a master data

Is it normal that the DataSource field is blank when opening a master data which is also an InfoSouce in InfoSource page.
Just locate an InfoSource which is also a master data or data target where next to which is a green triangle picture icon in InfoSource page, open it, the top part (Commnication Structure) is automatically expended. Expend the lower part "Transfer_Structure/Transfer_Rules", find the DataSource field is blank. This only occurs for an InfoSource which is also a master data which have more than two data loads (e.g., one is attibute, and the other is text load) or there are two InfoPackage loads for this master data. We checked for master data with only one InfoPackage under it (e.g., only text load) and find it's OK that the datasource field is not blank when expending the lower section.
Thanks

Kevin
It's not common. If you have three Data Sources like attributes, texts and hierarchy by default attribute data source will appear on the screen and for the rest of the things we need to do dropdown and select. This is how in general it appears.
Thanks
Sat

Issue when maintain master data in BW 740

Hi guy ,
When I want to maintain master data by right clicking info object in DEV system, It pop an IE application ,
http://bwqas.baicmotor.com:8000/sap/bc/webdynpro/sap/rsdmdm_md_maintenance_app?IOBJNM=ZFIIC005&sap-language=EN
It want me to login QAS system.I check my host configuration parameters ,i think it's no problem.

Hi
Please check this
From BW 7.40 SP5 Master data maintenance is moved from SAP GUI to WEBDynpro application. When I was trying to do the same it gives below error. I think It requires some settings to configure web services in BD7. Please check and activate the same. Please find the relevant links and SAP Notes which might help you.
http://wiki.scn.sap.com/wiki/display/BI/BW+7.4+Master+data+Maintenance+via+WebDynpro
Note: 1997402
Note: 1969105
Note: 1088717
Thanks
Ajay Daggubati

Set default value for price unit when creating material master data

HI: Every
could you tell me how to use user-exit or else ways to set default value(such as 1000) for field "Price unit" (MBEW-PEINH) when creating material master data(MM01)?
I have try to use Exit:EXIT_SAPLMGMU_001. However, this way cannot respones it.
thanks
Henry

Hi: Ihave find out a solution
Use BADI: BADI_MATERIAL_REF
SPROlogistics general enhancement supplement or change default data (industry)
And then creating a Implementation Name
Double click method: CREATE_MATERIAL
And then write code as below:
method IF_EX_MATERIAL_REFERENCE~CREATE_MATERIAL.
c_mbew-peinh = '1000' .
endmethod.
However, SAP still store '1000' in database evenif we change the default value such as 100 when we use TCode MM01.
in additional, we still use MM02 to change the default value such as '100'
can anybody tell me how to do?
thanks
Henry

Error when activating the master data

Hi
I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
<b>Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'</b>
If anyone came across this kind of problem plz share the solution.
Regards
Annie

Hi
I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
There are no short dumps in ST22
Regards
Annie

0vendor is not displaying name attribute when I maintained master data.

Similar Messages

Maybe you are looking for