0VTC Can't be allowed in production system

Hey, everybody. I need to know how can I activate transaction 0VTC (Routes & Stages) in a productive system, I applicated the 77430 and 356483 notes, but I didn't get any results.
I am working with SAP ECC 6.0, Thank you!

Hi
KIndly check the below patch level is there ,if not kindly apply the same with the help of basis
Software component Release level Highest support Description
SAP_APPL 600 0006 SAPKH60006 Logistics and Accounting
Regards
Damu

Similar Messages

MM and FICO document can not be updated in Production System

Hi Expert,
starting today we cannot posting any FI and MM document
We can SAP system and run any t-code normally but by the timeuser want to post the document. Document numbers (from running number) are created but when we need to display the document, document is not exist.
I have checked the table, but there is no record created for new created document number.
Example:
We conduct posing clearing for FI doc. From FB03 no data exist and from table BKPF no data exist also,
Thanks
Please help.
Rgds,

Hi
You should also check if any summarization is active in your system. The path is:
IMG>Financial Accounting>General Ledger Accounting>Business Transactions>Integration.
Here you need to check if summariztion is active for any fileds, like amount , plant, profit center etc for Table BKPF for reference Transactions like MKPF in MM, VBRK in SD.
Also confirm from the Basis Consultant if enought disk space is available for data base. Generally, this kind of error would happen because of the two reasons that I have already listed. Also try searching for a suitable OSS Note. Check also from a system ID with SAP ALL rights. Run SU53 in the Transaction FB03 with the Document Number for which you are getting the error to see if any authoriztion object might be missing. You need to involve your Basis Consultant for this.
Regards
Sanil Bhandari

Can i Debug Smartform in Production System??

Plz help me out in this

Hi,
Yes, You can debug smartforms in PRD. You have to execute the smartform, and go to the function module. Then if You know where You wish to debug, for eg. Select * from T005T. Find the code (as normally You do in the code editor) with the statement 'SELECT' and place a breakpoint over there. Similarly You can do for all other codes in the Smartform.
Regards,
Birendra

Performing SPAU in Production System

Dear Team,
We are in the process of upgrading our Production system from EHP3 to EHP7.
We upgraded our Quality system with SPDD and SPAU transport requests from Development system and it finished successfully.
But after upgrading our Kernel in Production system and before performing the EHP7 upgrade, we applied two SAP notes in Production system, these notes were transported from our temporary development(un-upgraded) system(parallel landscape).
While performing the EHP upgrade in Production system, SUM has prompted us the below message
“Decide about Incomplete Modification Transport”
CAUTION: The program has found the transport "MEDK906662"(our SPAU transport) for SPAU but it does not contain all objects which need adjustment.
When we checked the log file it show that two objects are missing in the SPAU transport.We suspect these are the SAP Notes which we applied after kernel upgrade and are missing in SPAU transport request.
Please let me know how we can correct this issue in Production system. I know that SPAU will appear in Production system, but will the system allow me to re-apply/reset the SAP note in SPAU as this system will be un-modifiable.
Regards
Imran

SE06.
System Change. Global setting "modifiable". Componenents "modifiable". Namespaces "modifiable".
Client setting-> select client -> Automatic recording of changes, changes to repository and cross-client customising allowed, protection level 0.
If that doesn't work, give yourself SAPALL and try again.
If that doesn't work, contact SAP because something is messed up. I've successfully applied notes in P systems during upgrade. Including ones that modify SAP_APPL.

Support message and change requests only for production system

Hi guys,
I would like to connect the solman helpesk with CHARM ( CHARM is still running ).
In CHARM I have to create a CR only for production system. ( don't know why - but works as designed).
In SAP helpdesk I can create support messages for every kind of system type but if I want to connect both (HD and CR) , the source system (ibase component) of the issue will copied to the CR and runs in error because of the rule (only p-system) of CHARM.
Of course I can change the ibase to production system manually in SDCR but it seems a very error-prone method.
Now my question: is it possible to change the ibase component due to the creation of CR by copy rule or something like this?
Kind regards
Rayko

Hi Rayko,
We do not have this option.
Once in ChaRM, we assume that the changes will always correct an issue in the PROD system.
I would recommend to open the tickets directly with the PROD system IBase, once the issue is also happening there.
Best Regards,
Fernando

How to active the transformations in production system

HI
How to active the transformations in production system when Time stamp error occured in SAP BI.
In SAP BW we use RS_TRANSTRU_ACTIVATE_ALL for tranfer rules activation.Is there any chance Activation allowes in production system witout any ABAP programme running.

Hi Gkreddy,
There is a specific program for that: RSDG_TRFN_ACTIVATE. It will also re-activate the related DTPs.
Please check the following SAP Notes:
#1408161 - Program for transformation activation.
#1471117 - SP25:RSDG_TRFN_ACTIVATE skips if M version has OBJSTAT 'INA'.
BR

Allow saving ad hoc query in production system

Hi Gurus,
I am trying to allow saving and modification of queries withing Global Area (Cross-client) by if i try to save created query, an error occurs with following text:
SAP System has status 'not modifiable'
There is a performance assistance memo with followed message number:
Message no. TK102
Could you please provide me more information how it occurred and how can I allow saving Ad hoc Query within global area in production system without mentioned error?
Thanks for help

Transaction PAAH

How to Enhance SPRO so that Config can be maintained in Production System

I have a requirement to Enhance the configuration nodes within SPRO so that the Client can directly edit specific configurations that would pose a risk to the business if they have to wait for the production release.
I have to enhance the following Node :
u2022 Advanced Planning & Optimization --> Supply Chain Planning --> Service Parts Planning (SPP) --> Monitoring --> Shortage Analysis -->Make General Settings for Shortage Analysis
u2022 Supply Network Collaboration --> Basic Settings --> Notes --> Define Reason Codes for Notes
The check box for "Current Setting" is input disabled for the above nodes in SPRO.
Please let me know if there is a SAP Note available to Enable "Current Settings" which will allow the Client to maintain settings directly in Production System.
If not , Please suggest any alternative solutions.
Thanks in Advance,
Vinit

Hi,
Your basis team should be able to help you to make changes directly in the production system.
Regards
Datta

Allowing Multiple Login of users in Production system

Hello,
In my office there are total 4 employes which all use SAP but they all use one username and password so it isn't possible for them to work at same time. Only one employe can work, then after he completes his task he must log-off, and then other employe logs-in and so on... So Multiple Logon option is disabled. I would like to enable Multiple Logon option but as I read it somewhere Mult.logons in productions system of users musbe set to off?
I am not sure what do do because I need to have option for employes to lgoin at the same time with one username/password.
If this is not possible is there any other way to achieve this? Also is there any way that one employe can enter/view data and other three employes can login at same time only to view data?
Any help is appreciated and <removed_by_moderator> !
Greetings,
Adi
Edited by: Julius Bussche on May 30, 2011 4:28 PM

P1071191 wrote:
Hi,
>
> In the default parameter, set the paramater login/multi_login_users,
>
> Set the value of this paramater login/multi_login_users UID1, UID2, UID3, UID4.
>
> May this solve your problem.
>
> Regards,
> Vinod.
>
> Edited by: gvk1305 on May 31, 2011 8:36 AM
gvk1305 wrote:
Hi,
>
> In the default parameter, set the paramater login/multi_login_users,
>
> Set the value of this paramater login/multi_login_users UID1, UID2, UID3, UID4.
>
> May this solve your problem.
>
> Regards,
> Vinod.
>
> Edited by: gvk1305 on May 31, 2011 8:36 AM
@Jurjen Heeck
Hello Jurjen,
I have no intention to voilate any of license agreement, I had to do it once in emergency.
@David Berry
Hi David,
There are four users in my office but I am not sure of exact total number of SAP users in my company.
@R. Voerman
Thank you very much for this information. I will try this definetly. Could you tell when I enter this parameter, then
multi_login_users option is ON, right?
@Julius Bussche
You can also assign it selectively to more users than the length of the system parameter field allows...
Hello Julious,
how do I this in transaction SU01, what do I need to change?
It's no problem form me to change this parameter but I am not sure if this is good because of security issues?
http://sap-basis-security.blogspot.com/2009/01/how-to-restrict-multiple-logons-of.html
Note:
"Multiple logons of users must be set to 1 in sap production systems. This can be allowed in DEV systems. But in production it must be restricted."
Edited by: samnovice on May 31, 2011 10:27 AM

Can i use SWWL to stop a sync send in IP, in production system

hi forum,
in a scenario of mine, theres a BPM and in the BPM there is a sync send to a rfc function module,
after the scenario ran, i can see in the PE, workflow, that the scenario is hanging in the synchronous send step for 3 days 15 hours, and has not yet returned the response....
i could identify the problem ...because in the SXNB_ADM runtime parameter, HTTP_TIMEOUT , the current value is 2700000, which comes out to be some 31 days......
may be due to this the step is still waiting,
how can i stop the process,
can i stop the IP using SWWL, will there be any proble,
coz its in PRODUCTION system......

Hi Sudeep,
if you dont have any correlation: just wait for the 31 days, nothing bad can happen. It is important, to correct the reason, so think about, to reduce the timeout and put an exception branch to the send step, which is stopping the process.
If you have a correlation, other messages can share in the hanging process; in that case you should delete the workitem at SWWL.
Regards,
Udo

Where can i find my windows product key ? am I not allowed to know this these days ?

Where can i find my windows product key ? am I not allowed to know this these days ?

If you bought a notebook with Windows 8, there are no product key stickers anymore.
The key is now digitally encoded in the BIOS.
http://www.mydigitallife.info/windows-8-to-have-oem-activation-3-0/
I don't have a notebook that came with windows 8, so I don't know if you can see it in the BIOS or not but that would the place to look.
Paul

How we can monitor while import request in production system?

dear friends,
will you please explain me
how we can monitor while import request in production system?
and
what are the things we have to monitor during the transport?
thanks
regards
zaheer

Hello Zaheer ,
I would always recommend to check that you have the latest transport tools, tp and R3trans in use in the system to avoid import errors.
Check with
tp -v
R3trans -v
if either are more than around 4 months old, I would strongly recommend to download the latest for your release from the SAP service marketplace. This avoids needlesly encountering issues that have been resolved in more recent patch lebels of these tools.
During the import, it is important to check the contents of the directories
usr/sap/trans/tmp
and
usr/sap/trans/log
that they are being continously updated which shows import is progressing.
Most important, keep checking the latest entries in the alog, uloag and slog to see which phases and trasnports are currently being imported.
If a transport fails, check these logs and the latest ones updated in usr/sap/trans/log for further details on the failure.
If there is an error please NEVER manual run any commands wihtout contacting SAP and having them analyse the issue.
When opening a message, be sure to include the latest alog, ulog and slog, along with the last few files most recently updated in usr/sap/trans/log and if possibel open an R3 connection to the import system.
Best regards,
Paul

How can I update my iPad products when it does not allow me?

How can I update my iPad products when it does not allow me?

All Apple servers are undergoing a huge number of hits. I think tomorrow or even the next day, all upgrade and activation servers will be in better shape.
Patience, Grasshopper.

Can time capsule allow me to stream music from my itunes library directly to my home stereo system? Is there anyway to access my itunes library from my tv?

can time capsule allow me to stream music from my itunes library directly to my home stereo system? Is there anyway to access my itunes library from my tv?

Sorry, not sure if I understand what you are asking.
Are you thinking of moving your iTunes / Media Folder from your Mac to the Time Capsule?
If you do this...when...not if...the Time Capsule drive has a problem....you lose everything because you have no backup for the iTunes library.
A much safer plan would be to add an external hard drive to your computer and move the iTunes library there.
Then, if you are using Time Machine for backups, it will back up both your Mac and the hard drive. Now you have "originals" on one drive and backups on another.
In order to stream music from the iTunes library, iTunes must always be open on your computer.
Is there anyway to access my itunes library from my tv?
Yes, if your TV has an HDMI input and you have an Apple TV.

Can anyone tell me which product allows me to convert pdf to jpeg?

can anyone tell me which product converts pdf to jpeg.

Hi
You can do this in multiple programs (photoshop, Illustrator & acrobat).
In Acrobat just open the PDF the go to File>Export>Image>jpeg.
In photoshop you can open the pdf the just save as .jpeg.
In Illustrator you can open the PDF then export as a jpeg.
Hope this helped.

0VTC Can't be allowed in production system

Similar Messages

Maybe you are looking for