0X00000116 nvlddmkm.sys - with Nvidia GTX280 OC

Hello lads,
Ive started getting a Stop Error with "0X00000116 nvlddmkm.sys" when trying to play games.
I have 2 GTX280 OC's from MSI and tried them both on their own and still get the error.
Ive reinstalled the latest drivers thinking its corrupt drivers, but it still happens.
Any help or advice would be great.
CPU: Quad Core Q6600 @ 3Ghz
Motherboard: Asus Striker 2 Extreme
Memory: OCZ Platinum Edition DDR3 1333mhz 2x 2GB
Video card: MSI GTX280 OC x 2
Hard drive: 2x Seagate Baracuda 750GB
Operating system: Vista 64bit SP1
Power Supply: Cooler Master Real Power 1000watt
Mathew

if i followed bas's advice i would be on 32 bit xp and thrown away my 2 280gtxocs for a ati 4870 (it's better apparently) vista 64 is a little wobbly, especially with overclocked quads, using overclocked grx cards with the latest drivers gives me the same error, either downclock card to standard or use an older driver, i use 142 from msi site and have both cards @700 which gives me better performance than standard clocks with latest driver, you have to experiment when you find the set up that works, back your system up on it for when you try nvidias next attempt at satisfying the masses. use a driver cleraner or good registry cleaner if you're not happy with manually removing the left overs after standard add/ remove.
mines a different system and with quad sli you need 64 bit, experiment most set ups work fine, a few bsod, check through vista logs to make sure it's nvidia driver and nothing else.
good luck.

Similar Messages

  • Problem with nvidia graphic card, nvlddmkm.s​ys

    I have a HP m9000 , originally it had Vista, it started to fail and display the error nvlddmkm.sys (on a blue screen od death), i intalled Windows 8 in hope the problem get resolve. but the problem still persist. At the beginning on W8 it looks like working fine, but suddenly it started to display "controller not responding", and then it is displayin "Something goes wrong with your graphic card".
    I found on internet a fix; expanding the nvlddmkm.sy_ and replace the file in system32. i made it but right now after the windows logon screen the monitor starts to blink between black screen and off screen.
    The grapghic card is a NVIDIA 8500 GT. I tested the graphic card in other computer, and at the begining it worked fine, but after the dirver installation it started to fail in the same way.
    Ad far i could read on intetrnet it is a failure with NVIDIA.
    Is there any solution for this problem? Or i should change the graphic video card? (Maybe for an ATI)

    Hi,
    I have used many different NVIDIA cards (including a 8600) on different PCs and never had your issue.
    As for drivers, you can always use the original drivers that came with your PC and then do an update if necessary.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • T410 NVIDIA BSOD caused by nvlddmkm.sys

    Hi all,
    I have lot of BSOD (1/week at least) caused by nvlddmkm.sys
    I have the latest driver according to lenovo update.
    I'm on Win7 x64.
    This is not caused by overheating I'm not running any game or 3d application,
    GPU idles ~60C.
    Could someone help me what to do?
    (Some time ago I tried the driver from NVIDIA page, but had the same experience, now I'm back on the Lenovo "official" driver.)

    hey nuri,
    could you try the following ?
    - uninstall the current driver you have installed
    - -restart your system and let Win7 install its generic driver
    - check if it happens again
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • BSOD after installing NVIDIA driver (nvlddmkm.sys error)

    Hi, I hope I'm posting this in the right place.
    A few days ago I purchased an MSI GS60 044 (970m) laptop with Windows 8 preinstalled on it. I have an intense hatred for Windows 8 so I decided to do a clean install of Windows 7 using a disk I own. Everything was going well until I installed the NVIDIA graphics driver. The computer would run sluggishly and then Blue Screen with an error regarding "nvlddmkm.sys."
    I got the drivers from MSI's website and followed the installation order on that page. I even tried downloading the latest driver from NVIDIA's website, but I got the same results.
    Is anyone familiar with this issue? Is there anything I can do?
    Thanks!
    - Daniel

    I really appreciate the help! I ended up reinstalling windows again and this time before installing the NVIDIA driver I installed the BIOS update that's provided under the "BIOS" tab on the GS60's support page. It's been installed for about 2 hours now with no crashes, so I hope that means it's fixed. I could just be getting lucky though, I'll post again tomorrow with results.
    Unfortunately, now my LAN and WLAN drivers have stopped working. When I troubleshoot, windows says that there aren't any drivers detected. I have tried uninstalling and reinstalling both the bigfoot and intel drivers but neither are working. I just can't catch a break with this thing. >_<
    In the event that I do have to send it to MSI, wouldn't the computer not be covered in their service anymore since I installed a different OS/formatted the original drives? I'm really hoping there isn't a hardware issue since I ordered the laptop brand new off of ebay.
    Thanks again for all of the help!

  • Problems with Nvidia GeForce 210 and windows 8.1

    Hi all, I have Windows 8.1 Pro update 1 64bit installed, two weeks ago I started giving problems graphics card NVidia (even has me
    given several blue screen).
    I tried to update the drivers for the card but I got the same problem. It was working properly with generic
    drivers, and if I went to Computer Administrator me a yellow triangle appeared
    on my graphics card and the properties told me the following:
    Windows has stopped this device because it has reported problems.
    (Code 43 )
    My machine is as follows:
    Mainboard : Asus P5K SE
    Chipset: Intel P31/P35
    Processor : Intel Core 2 Quad Q6600 @ 2400MHz
    Physical Memory : 3072MB (3 x 1024 DDR2- SDRAM)
    Video Card : NVIDIA GeForce 8500 GT
    Hard Disk : Seagate ST3320620AS ATA Device (320GB )
    Monitor Type: LG Electronics L1919S
    I just formatted
     the computer from scratch, and
    I still had the same problem with the graphics card,
    so I imagined it would be a hardware problem
    and bought NVIDIA GeForce 210.
    In the end I
    upgraded to Windows 8.1 update 1 with
    the latest drivers for the GeForce 210,
    and after 6 days running everything correctly, a few days ago
    returned to give me problems,
    the screen sometimes freezes and will not
    let me do anything and after a while
    giving me a blue screen and reboots
    me, I suspect that the graphics drivers
    are giving me problems, and I had to
    disable the graphics card and work with
    generic drivers from Microsoft, and even then I
    was restarted once.
    I installed Driver Booster and all the drivers are updated.
    Could
     anyone analyze
    dump files dmp ? Download here 
    I got another dmp:
     C:\Windows\MEMORY.DMP  but it is too heavy.
    Thanks

    yes, I check the dump files
    this cause by graphic card, on which graphic card you reformat your PC and update
    .NET framework maybe cause this driver corrupted
    my suggestion is try using internal graphic card, just for testing
    Just in case you don't believe me, please check this dump file
    * Bugcheck Analysis *
    Use !analyze -v to get detailed debugging information.
    BugCheck 116, {ffffe000d84c4010, fffff800b540be2c, ffffffffc000009a, 4}
    Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for nvlddmkm.sys
    *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
    Probably caused by : nvlddmkm.sys ( nvlddmkm+9bbe2c )
    Followup: MachineOwner
    1: kd> !analyze -v
    * Bugcheck Analysis *
    VIDEO_TDR_FAILURE (116)
    Attempt to reset the display driver and recover from timeout failed.
    Arguments:
    Arg1: ffffe000d84c4010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
    Arg2: fffff800b540be2c, The pointer into responsible device driver module (e.g. owner tag).
    Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
    Arg4: 0000000000000004, Optional internal context dependent data.
    Debugging Details:
    FAULTING_IP:
    nvlddmkm+9bbe2c
    fffff800`b540be2c 803db68aeeff00 cmp byte ptr [nvlddmkm+0x8a48e9 (fffff800`b52f48e9)],0
    DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
    CUSTOMER_CRASH_COUNT: 1
    BUGCHECK_STR: 0x116
    PROCESS_NAME: System
    CURRENT_IRQL: 0
    ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
    STACK_TEXT:
    ffffd000`8adadbb8 fffff800`b457bfac : 00000000`00000116 ffffe000`d84c4010 fffff800`b540be2c ffffffff`c000009a : nt!KeBugCheckEx
    ffffd000`8adadbc0 fffff800`b457008d : fffff800`b540be2c ffffe000`d760b7f0 ffffe000`d84c4010 00000000`00000001 : dxgkrnl!TdrBugcheckOnTimeout+0xec
    ffffd000`8adadc00 fffff800`b4570582 : ffffe000`d760f540 ffffd000`8adadc60 00000000`00000002 00000000`00000001 : dxgkrnl!ADAPTER_RENDER::Reset+0x1f5
    ffffd000`8adadc30 fffff800`b457b919 : ffffd000`8ada01b0 00000000`00000000 ffffe000`d5ff91a0 ffffe000`d742b000 : dxgkrnl!DXGADAPTER::Reset+0x416
    ffffd000`8adadca0 fffff800`b446cfde : fffff800`b4453c90 ffffe000`d742b000 fffff802`84c1c000 00000000`00000000 : dxgkrnl!TdrResetFromTimeout+0x15
    ffffd000`8adadcd0 fffff800`b4453d1d : ffffe000`d742b000 00000000`00000080 ffffe000`d50b4500 ffffe000`00000000 : dxgmms1!VidSchiRecoverFromTDR+0x1a
    ffffd000`8adadd00 fffff802`84ceb794 : fffff802`84f69a00 ffffe000`d50b4500 ffffd000`8adaddd0 fffff802`84d7337d : dxgmms1!VidSchiWorkerThread+0x8d
    ffffd000`8adadd40 fffff802`84d765c6 : fffff802`84f02180 ffffe000`d50b4500 fffff802`84f69a00 00000000`00000000 : nt!PspSystemThreadStartup+0x58
    ffffd000`8adadda0 00000000`00000000 : ffffd000`8adae000 ffffd000`8ada8000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
    STACK_COMMAND: .bugcheck ; kb
    FOLLOWUP_IP:
    nvlddmkm+9bbe2c
    fffff800`b540be2c 803db68aeeff00 cmp byte ptr [nvlddmkm+0x8a48e9 (fffff800`b52f48e9)],0
    SYMBOL_NAME: nvlddmkm+9bbe2c
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: nvlddmkm
    IMAGE_NAME: nvlddmkm.sys
    DEBUG_FLR_IMAGE_TIMESTAMP: 5315b408
    FAILURE_BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys
    BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys
    ANALYSIS_SOURCE: KM
    FAILURE_ID_HASH_STRING: km:0x116_image_nvlddmkm.sys
    FAILURE_ID_HASH: {c89bfe8c-ed39-f658-ef27-f2898997fdbd}
    Followup: MachineOwner
    1: kd> lmvm nvlddmkm
    start end module name
    fffff800`b4a50000 fffff800`b56a8000 nvlddmkm T (no symbols)
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp: Tue Mar 04 19:07:52 2014 (5315B408)
    CheckSum: 00C20523
    ImageSize: 00C58000
    Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  • GT70 OND-219US + nvlddmkm.sys + BSOD

    Before I dive into the issue, I'll throw out there that I have an RMA to have warranty work done that is related to the issue. I'm posting this in case anyone has ran into the issue and knows of any way to remedy the issue without having to resort to an RMA.
    This rig has run flawlessly for nearly two years, and has been amazing at playing every game I've tossed at it on max settings.
    About 8 weeks ago, it started doing random BSOD, paired with nvlddmkm.sys in the error. The fan kicks into a heightened state and sticks as this happens. The settings are factory, with no modifications and no overclocking (laptop was too expensive for me to risk that). I suspect that it was the result of an Nvidia driver, but can't be 100% certain.
    I have removed all video drivers using DDU, and performed reinstalls with the factory OEM drivers. None of these have proven useful.
    I am able to test games using the Intel GPU, and there are no crashes using this method (I suspected as much, since the file at the center of the BSOD, nvlddmkm.sys, is an Nvidia file).
    I have reinstalled Windows 7 home premium three times. I also own Windows 7 Pro, and Windows 8.1 Pro. I have installed these each two times. The issue still occurs.
    I'm reasonably confident that the RMA is the best step for this. I have further read on Nvidia's official forums that there have been driver issues with the 675m that cause the issue, and Nvidia has yet to remedy this. None of the 680m cards have these issues. It is only the 675m.
    I don't think MSI would do this, but following the revelation that the 675m has some pretty big issues with Nvidia's drivers (not pointing fingers at MSI at all. Nvidia gets all the blame for this), I'm wondering if MSI would be open to swapping my 4GB 675m for a 2GB 680m, or even a comparable AMD GPU? Seeing as my warranty is expiring at the end of August, I'd like to make sure the issue is resolved, and I'm not stuck with another 675m that will have the same issues at some point after the warranty expires.
    For me, this is more about peace of mind, being able to get work and play done without any downtime. I'd love it if I didn't have to live under the threat of the same card having the same issue after the warranty has expired. :D
    Selling my ASUS gaming laptop and getting this laptop was the best decision I've made (next to getting divorced, of course).

    This exact same thing happened to me, the month after my warranty expired. 
    BSOD with the same nvidia file.  After that, the device is always stopped by Windows (error 43) in Device Manager.  I can get it "Working properly" if I disable and re-enable it, but it's still useless since for any software (Nidia Contol Panel, games, etc) to recognize it's existence it needs to be enabled on reboot.  (OR it's not really enabled and CP is lying to me). 
    Does anyone know if there will every be a fix for this?  It's starting to seem like the card itself is damaged, since no driver works (even the one on the MSI Install CD).   
    Please say it ain't so. It'll be another ten years before I can buy a lappy like this one :(
    MSI G70 0ND, GTX 675MX 4GB with Windows 8.1

  • Nvlddmkm.sys on startup

    OS - windows 7 home edition 64bit - updated to SP1 the other day
    MOBO - ASUS P5B DLX/WIFI-AP Pentium 4/Celeron/Pentium D/PentiumEE/65nm dual-core/Core2Duo/Core2EE
    PSU - Hiper 580W Type-R Modular PSU SLI/CrossFire Certified
    GPU - MSI Nvidia GTX460/OC 1GB PCI-EX
    HD - Western Digital WD2500KS Caviar SE 250GB 7200RPM SATAII/300 16MB Cache
    RAM - Corsair TWIN2X 6400C4 DDR2, 2048MB CL4 Kit w/two 1GB Dimm's, E.P.P Technology (two of these 4Gb in total)         
    CPU - Intel Core 2 Duo E6600 (2.4ghz) Socket 775 FSB1066 4MB Cache Retail Boxed Processor
    CPU cooler - Arctic Cooling (AC-FRZ-7P) Freezer 7 Pro Socket 775 CPU Cooler
    DVD - NEC AD-5170A-0B 18xDVD±RW DL Black - Bare Drive
    floppy drive - Sony OEM 3.5 Floppy Drive Black
    Hi all,
    After my MSI 8800GTX broke, i have now bought a MSI 560 GTX.
    https://forum-en.msi.com/index.php?topic=146292.0
    Im very pleased with it, but was very dissapointed to see an old problem reoccurring. I used to get nvlddmkm.sys errors during certain games (IL2 1946 was the main culprit) where the game would freeze, black out, and i would have to end task to get back to the desktop. When I got back to the desktop there would be an error saying 'a driver had stopped' and then something about nvlddmkm.sys. I started on Vista 64bit, then upgraded to windows 7. I had the problem on both, but more so on Vista.
    Now I have tried every remedy under the sun for this, if you google it you will see what I mean, noone seems to have a clear idea of what causes it, and there are plenty of remedies(none worked for me). Nvidia blame windows, windows blame nvidia, some blame ram, some PSU, some the GPU, some the mobo.
    Some claim updating drivers fixes it, some that you have to use the driver cleaner, or rolling back drivers, or looking for nvlddmkm.sys in your registry (multiple copies were rpesent, driver cleaner wasnt deleting them) or numerous other things.
    The issue I am having is not quite the same, it hasn't happened in-game yet, but I have got a BSOD on startup a few times and the error message is the nvlddmkm.sys one.
    I really hope this forum can help, Ithis is the 2nd MSI card I have bought i would like to enjoy this one.

    Quote from: conorc on 31-March-11, 17:57:21
    but if it calls for 31, and i have 30, thas close enough.
    You have a bungeecord that stretches to 140 meters, the jump is 139 meters, close enough, but would you jump??
    Close enough doesnt work in the computer/electricsworld
    Dont go skimping on the psu, its your lifeblood for your system, if it goes it often takes other parts with it to the eternal electronicafields.
    Get a Corsair, PC an Powercooling, Seasonic, Thermaltake or so, those are good quality psu's.
    Read here for good reviews about psu's:
    http://www.jonnyguru.com/index.php

  • GT70-0ND nvlddmkm.sys BSOD error

    Hello Everyone.
    the last months or so i started getting random BSOD all pointing to nvlddmkm.sys
    i got in touch with nvidia to help me solve the problem.
    the things i tried:
    1) changing registry: add TdrDelay and TdrLevel (per nvidia tech department)
    2) clean install of several different versions of nvidia graphics drivers (note i also used Driver-Fusion to clean up registry after each uninstall)
    3) Full-system scan for Malware, Virus etc - using several programs, such as: AVG, MalwareByte.... - all returned clean reports.
    lastly i tried running "Windows Memory Diagnostic Tool" and Memtest86+.
    now both discovered errors!!
    Memtest86 was able to complete a full pass with no crashes
    but Windows tool crashed twice, once just as i started testing and once just at the beginning of the second pass.
    Pictures of the Errors:
    Memtest86 after 1 pass:
    Windows Memory Diagnostic Tool - Stuck.
    now i wanna test out which RAM module is at fault, by removing them all and inserting them one by one for testing.
    the problem im currently having is as follows:
    as u open up the laptop cover from the bottom, u can immediately see 2 RAM modules sitting near the CPU & GPU.
    but my system has 4 RAM sticks. the other 2 i cannot locate.
    if u guys know, could you please tell me where can i locate them and how to remove them?
    i rather not disassemble the entire thing.
    just in case you wonder, i checked youtube and google for instructions on how exactly to do this.
    but all the guides i found only mention the 2 RAM modules i already know about and not the other 2.
    Thanks in Advance.
    Edit:
    forgot to add system specs:
    CPU: i7-3630QM
    GPU Geforce GTX 675MX 4GB
    Memory: 16GB DDR3 1600Mhz (4x4GB)
    SSD: 120GB Patriot Pyro SE
    HDD: 750GB WesternDigital 7200rpm
    OS: Windows 7-64bit
    side-note: system came pre-installed with windows 8 + appropriate UEFI Bios.
    as soon as i got the system i formatted it and installed Windows 7-64bit. - switched Bios to LEGACY mode.

    i also dont live in the USA, luckily mine is still within the 1 year global warranty.
    i actually got this laptop as an RMA replacement because of MSI :censored:up.
    i had the GT783R, the graphics card went bad just 1 month after the 1 year global warranty expired. had to send all the way to the USA to fix it (still a better option than buying a new laptop or a replacement graphics card - which almost none sell it.)
    well, they replaced my GTX 580M 2GB with a GTX 670M 3GB, calling the 670M "better" than the 580M. if you know your graphics card, a little check up on google can tell u that no! its not better. the 670M is almost equal in performance to the 570M.
    anyways after several calls to their tech support and speaking with a manager they agreed to take back my GT783R with them covering shipping expenses and giving me a new laptop, the GT70, in its stead.
    luckily for me, Laptop warranty goes according to laptop serial number, meaning my GT70 is still under the 1 year global warranty.
    so i can fix it in my own country.
    why am i telling you all this?
    because prior to sending my GT783R to the USA, i spent almost 2 months troubleshooting the problem and trying to solve it. so im trying to save u some time and headache.
    i even tried contacting nvidia tech support to help me solve the problem
    eventually the problem wouldnt go away and i had wasted 2 months without a laptop for nothing.
    so basically if you run the following tests and everything is fine it most likely the graphics card and it needs to be replaced.
    first you can make sure your laptop isnt full of dust inside and the vents arent clogged.  then try these:
    1) running memtest (several passes) with no errors
    2) formatting the laptop to rule out software issues
    3) testing several nvidia drivers (the ones the came with the laptop and the latest Stable nvidia release)
    4) (nvidia tech rep suggestion) Open NVIDIA Control Panel --> Manage 3D settings.
        Go to Program Settings tab.
        In the setting window, change the ‘Power Management Mode’ to ‘Prefer Maximum Performance’.
    5) (nvidia tech rep suggestion)  Please try this registry fix and observe the computer performance.
         a) Go to the Registry Editor (Press Windows Logo + R and type "regedit" in the Run window and click ok)
         b) Navigate to HKEY_LOCAL_MACHINE - > System -> CurrentControlSet -> Control -> GraphicsDrivers (make sure Graphics Drivers is highlighted).
         c) Right click -> New -> DWORD (32-bit) value -> Name it: TdrDelay -> double click it -> Set it to A (hexadecimal) or 10 (decimal).
         If that doesn't work, try disabling it, by adding the following DWORD: TdrLevel and setting the value to 0, then rebooting.
    6) updating BIOS to latest version.
    ****obviously im not responsible for anything that happens to your laptop and you are trying the stuff i mentioned at your own risk.*****
    btw, if your laptop suddenly doesnt even recognize your Graphics card i think its toast.
    no point wasting time, send it RMA if u can.
    Good Luck.

  • Unable to Use Onboard Audio with Nvidia GPU since Linux 3.4

    I am currently stuck using linux 3.3.8-1 along with nvidia 295.49-1, because I don't know how to workaround the kernel disabling MSI for snd-hda-intel. This module is used by both the Nvidia HDMI audio and the ALC880 onboard audio. Previously, I have been able to disable HDMI audio to be able to use the onboard audio, but now I don't know what to do. I have attempted to use "options snd-hda-intel enable_msi=1" when modprobing on boot, which gets rid of the "hda_intel: Disabling MSI" message but it hasn't given me a working onboard audio output.
    I have also used the following command along with enable_msi=1 (found here: http://www.mjmwired.net/kernel/Document … HOWTO.txt) in my rc.local
    echo 1 > /sys/bus/pci/devices/0000\:00\:1b.0/msi_bus
    Of course, it is my assumption that the kernel disabling MSI is the cause of the problem, but it might be something else. Please let me know if any additional logs would be helpful.
    Linux 3.4.4-3, Nvidia 302.17-2  Dmesg Output
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.4-3-ARCH (nobody@rampage) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Tue Jul 3 15:35:13 UTC 2012
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe54000 (usable)
    [ 0.000000] BIOS-e820: 000000003fe54000 - 000000003fee8000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000003fee8000 - 000000003ff00000 (ACPI data)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.3 present.
    [ 0.000000] DMI: 507GR /D915GAG, BIOS AG91510J.15A.0816.2005.0214.1818 02/14/2005
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x3fe54 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FC0000000 write-back
    [ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00fe650] fe650
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
    [ 0.000000] RAMDISK: 3fb6f000 - 3fe44000
    [ 0.000000] Allocated new RAMDISK: 37529000 - 377fd6a7
    [ 0.000000] Move RAMDISK from 000000003fb6f000 - 000000003fe436a6 to 37529000 - 377fd6a6
    [ 0.000000] ACPI: RSDP 000fe020 00014 (v00 GATEWA)
    [ 0.000000] ACPI: RSDT 3fefde48 00038 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACP 3fefcf10 00074 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 3fef8010 0339C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACS 3fee5c40 00040
    [ 0.000000] ACPI: APIC 3fefce10 00068 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: WDDT 3fef7f90 00040 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 3fef7f10 0003C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 3fef6d90 00124 (v01 GATEWA CpuPm 00000330 MSFT 01000013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 134MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0003fe54
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0003fe54
    [ 0.000000] On node 0 totalpages: 261603
    [ 0.000000] free_area_init_node: node 0, pgdat c061ec40, node_mem_map f6d28200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 269 pages used for memmap
    [ 0.000000] HighMem zone: 34121 pages, LIFO batch:7
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:c0100000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6d07000 s31424 r0 d21824 u53248
    [ 0.000000] pcpu-alloc: s31424 r0 d21824 u53248 alloc=13*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259558
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/10f8033d-8fe9-46be-bccf-68a14025bbaa ro init=/bin/systemd
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 2093600 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fe54)
    [ 0.000000] Memory: 1025576k/1046864k available (3810k kernel code, 20836k reserved, 1471k data, 524k init, 137560k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc0629000 - 0xc06ac000 ( 524 kB)
    [ 0.000000] .data : 0xc04b88f7 - 0xc0628800 (1471 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc04b88f7 (3810 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 2999.992 MHz processor.
    [ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.98 BogoMIPS (lpj=9999973)
    [ 0.006674] pid_max: default: 32768 minimum: 301
    [ 0.006706] Security Framework initialized
    [ 0.006712] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006735] Mount-cache hash table entries: 512
    [ 0.007027] Initializing cgroup subsys cpuacct
    [ 0.007032] Initializing cgroup subsys memory
    [ 0.007043] Initializing cgroup subsys devices
    [ 0.007046] Initializing cgroup subsys freezer
    [ 0.007049] Initializing cgroup subsys net_cls
    [ 0.007052] Initializing cgroup subsys blkio
    [ 0.007102] CPU: Physical Processor ID: 0
    [ 0.007105] CPU: Processor Core ID: 0
    [ 0.007108] mce: CPU supports 4 MCE banks
    [ 0.007122] CPU0: Thermal monitoring enabled (TM1)
    [ 0.007127] using mwait in idle threads.
    [ 0.010796] ACPI: Core revision 20120320
    [ 0.013347] ftrace: allocating 16930 entries in 34 pages
    [ 0.023410] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.023795] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.058322] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
    [ 0.059996] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
    [ 0.059996] ... version: 0
    [ 0.059996] ... bit width: 40
    [ 0.059996] ... generic registers: 18
    [ 0.059996] ... value mask: 000000ffffffffff
    [ 0.059996] ... max period: 0000007fffffffff
    [ 0.059996] ... fixed-purpose events: 0
    [ 0.059996] ... event mask: 000000000003ffff
    [ 0.076747] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.096685] CPU 1 irqstacks, hard=f64ae000 soft=f64b0000
    [ 0.096689] Booting Node 0, Processors #1 Ok.
    [ 0.009999] Initializing CPU#1
    [ 0.109847] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.109913] Brought up 2 CPUs
    [ 0.109918] Total of 2 processors activated (12004.96 BogoMIPS).
    [ 0.110087] devtmpfs: initialized
    [ 0.110253] PM: Registering ACPI NVS region [mem 0x3fe54000-0x3fee7fff] (606208 bytes)
    [ 0.111622] NET: Registered protocol family 16
    [ 0.111622] ACPI: bus type pci registered
    [ 0.111622] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.111622] PCI: not using MMCONFIG
    [ 0.112603] PCI: Using configuration type 1 for base access
    [ 0.116699] bio: create slab <bio-0> at 0
    [ 0.116741] ACPI: Added _OSI(Module Device)
    [ 0.116741] ACPI: Added _OSI(Processor Device)
    [ 0.116741] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.116741] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.117482] ACPI: EC: Look up EC in DSDT
    [ 0.119433] ACPI: Interpreter enabled
    [ 0.119446] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.119477] ACPI: Using IOAPIC for interrupt routing
    [ 0.119501] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.119654] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.119657] PCI: Using MMCONFIG for extended config space
    [ 0.121061] ACPI: No dock devices found.
    [ 0.121073] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.122518] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.125297] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.125302] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.125306] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.125310] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000fffff] (ignored)
    [ 0.125314] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff] (ignored)
    [ 0.125317] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xe0000000] (ignored)
    [ 0.125321] PCI: root bus 00: using default resources
    [ 0.125377] PCI host bridge to bus 0000:00
    [ 0.125382] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.125385] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [ 0.125400] pci 0000:00:00.0: [8086:2580] type 00 class 0x060000
    [ 0.125463] pci 0000:00:01.0: [8086:2581] type 01 class 0x060400
    [ 0.125521] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.125577] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
    [ 0.125597] pci 0000:00:1b.0: reg 10: [mem 0x53300000-0x53303fff 64bit]
    [ 0.125676] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.125704] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
    [ 0.125786] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.125815] pci 0000:00:1c.1: [8086:2662] type 01 class 0x060400
    [ 0.125898] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.125928] pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400
    [ 0.126011] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.126040] pci 0000:00:1c.3: [8086:2666] type 01 class 0x060400
    [ 0.126123] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.126154] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
    [ 0.126201] pci 0000:00:1d.0: reg 20: [io 0x4080-0x409f]
    [ 0.126239] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
    [ 0.126285] pci 0000:00:1d.1: reg 20: [io 0x4060-0x407f]
    [ 0.126322] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
    [ 0.126368] pci 0000:00:1d.2: reg 20: [io 0x4040-0x405f]
    [ 0.126405] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
    [ 0.126451] pci 0000:00:1d.3: reg 20: [io 0x4020-0x403f]
    [ 0.126498] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
    [ 0.126521] pci 0000:00:1d.7: reg 10: [mem 0x53304000-0x533043ff]
    [ 0.126613] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.126638] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.126718] pci 0000:00:1f.0: [8086:2640] type 00 class 0x060100
    [ 0.126810] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
    [ 0.126823] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff
    [ 0.126850] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
    [ 0.126867] pci 0000:00:1f.1: reg 10: [io 0x40d8-0x40df]
    [ 0.126878] pci 0000:00:1f.1: reg 14: [io 0x40ec-0x40ef]
    [ 0.126889] pci 0000:00:1f.1: reg 18: [io 0x40d0-0x40d7]
    [ 0.126901] pci 0000:00:1f.1: reg 1c: [io 0x40e8-0x40eb]
    [ 0.126912] pci 0000:00:1f.1: reg 20: [io 0x40b0-0x40bf]
    [ 0.126954] pci 0000:00:1f.2: [8086:2651] type 00 class 0x01018f
    [ 0.126971] pci 0000:00:1f.2: reg 10: [io 0x40c8-0x40cf]
    [ 0.126981] pci 0000:00:1f.2: reg 14: [io 0x40e4-0x40e7]
    [ 0.126991] pci 0000:00:1f.2: reg 18: [io 0x40c0-0x40c7]
    [ 0.127002] pci 0000:00:1f.2: reg 1c: [io 0x40e0-0x40e3]
    [ 0.127012] pci 0000:00:1f.2: reg 20: [io 0x40a0-0x40af]
    [ 0.127053] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.127072] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
    [ 0.127129] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
    [ 0.127217] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
    [ 0.127232] pci 0000:01:00.0: reg 10: [mem 0x52000000-0x52ffffff]
    [ 0.127247] pci 0000:01:00.0: reg 14: [mem 0x40000000-0x4fffffff 64bit pref]
    [ 0.127261] pci 0000:01:00.0: reg 1c: [mem 0x50000000-0x51ffffff 64bit pref]
    [ 0.127271] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f]
    [ 0.127281] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
    [ 0.127352] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
    [ 0.127367] pci 0000:01:00.1: reg 10: [mem 0x53000000-0x53003fff]
    [ 0.136679] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.136685] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.136689] pci 0000:00:01.0: bridge window [mem 0x52000000-0x530fffff]
    [ 0.136695] pci 0000:00:01.0: bridge window [mem 0x40000000-0x51ffffff pref]
    [ 0.136765] pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
    [ 0.136788] pci 0000:02:00.0: reg 10: [io 0x2028-0x202f]
    [ 0.136804] pci 0000:02:00.0: reg 14: [io 0x2034-0x2037]
    [ 0.136819] pci 0000:02:00.0: reg 18: [io 0x2020-0x2027]
    [ 0.136836] pci 0000:02:00.0: reg 1c: [io 0x2030-0x2033]
    [ 0.136852] pci 0000:02:00.0: reg 20: [io 0x2000-0x201f]
    [ 0.136868] pci 0000:02:00.0: reg 24: [mem 0x53200000-0x532001ff]
    [ 0.136885] pci 0000:02:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
    [ 0.146676] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.146682] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.146687] pci 0000:00:1c.0: bridge window [mem 0x53200000-0x532fffff]
    [ 0.146740] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.146747] pci 0000:00:1c.1: bridge window [mem 0x53400000-0x534fffff]
    [ 0.146798] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 0.146805] pci 0000:00:1c.2: bridge window [mem 0x53500000-0x535fffff]
    [ 0.146858] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
    [ 0.146866] pci 0000:00:1c.3: bridge window [mem 0x53600000-0x536fffff]
    [ 0.146917] pci 0000:06:05.0: [11c1:5811] type 00 class 0x0c0010
    [ 0.146938] pci 0000:06:05.0: reg 10: [mem 0x53101000-0x53101fff]
    [ 0.147024] pci 0000:06:05.0: supports D1 D2
    [ 0.147027] pci 0000:06:05.0: PME# supported from D0 D1 D2 D3hot
    [ 0.147053] pci 0000:06:08.0: [8086:1064] type 00 class 0x020000
    [ 0.147074] pci 0000:06:08.0: reg 10: [mem 0x53100000-0x53100fff]
    [ 0.147086] pci 0000:06:08.0: reg 14: [io 0x1000-0x103f]
    [ 0.147161] pci 0000:06:08.0: supports D1 D2
    [ 0.147164] pci 0000:06:08.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.147208] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
    [ 0.147214] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
    [ 0.147219] pci 0000:00:1e.0: bridge window [mem 0x53100000-0x531fffff]
    [ 0.147227] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.147231] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
    [ 0.147260] pci_bus 0000:00: on NUMA node 0
    [ 0.147266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.147465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
    [ 0.147735] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    [ 0.147802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
    [ 0.147870] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
    [ 0.147936] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
    [ 0.148039] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.148044] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.148047] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.152485] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152581] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
    [ 0.152676] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152768] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152859] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.152951] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.153045] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.153138] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.153367] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.153374] vgaarb: loaded
    [ 0.153377] vgaarb: bridge control possible 0000:01:00.0
    [ 0.153377] PCI: Using ACPI for IRQ routing
    [ 0.160505] PCI: pci_cache_line_size set to 64 bytes
    [ 0.160612] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 0.160616] reserve RAM buffer: 000000003fe54000 - 000000003fffffff
    [ 0.160771] NetLabel: Initializing
    [ 0.160775] NetLabel: domain hash size = 128
    [ 0.160777] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.160799] NetLabel: unlabeled traffic allowed by default
    [ 0.160906] hpet clockevent registered
    [ 0.160911] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.160917] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.160924] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.173350] Switching to clocksource hpet
    [ 0.182676] pnp: PnP ACPI init
    [ 0.182706] ACPI: bus type pnp registered
    [ 0.184200] pnp 00:00: [bus 00-ff]
    [ 0.184205] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.184209] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.184212] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.184216] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.184219] pnp 00:00: [mem 0x000c0000-0x000fffff window]
    [ 0.184223] pnp 00:00: [mem 0xf0000000-0xfbffffff window]
    [ 0.184229] pnp 00:00: [mem 0x40000000-0xe0000000 window]
    [ 0.184297] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.184317] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 0.184321] pnp 00:01: [mem 0xfed13000-0xfed13fff]
    [ 0.184324] pnp 00:01: [mem 0xfed14000-0xfed17fff]
    [ 0.184327] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [ 0.184330] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 0.184333] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 0.184336] pnp 00:01: [mem 0xfed20000-0xfed9ffff]
    [ 0.184412] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.184417] system 00:01: [mem 0xfed13000-0xfed13fff] has been reserved
    [ 0.184421] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.184425] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.184429] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.184432] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.184436] system 00:01: [mem 0xfed20000-0xfed9ffff] has been reserved
    [ 0.184442] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.184642] pnp 00:02: [io 0x0000-0x000f]
    [ 0.184646] pnp 00:02: [io 0x0081-0x0083]
    [ 0.184649] pnp 00:02: [io 0x0087]
    [ 0.184652] pnp 00:02: [io 0x0089-0x008b]
    [ 0.184655] pnp 00:02: [io 0x008f]
    [ 0.184658] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.184661] pnp 00:02: [dma 4]
    [ 0.184706] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.184723] pnp 00:03: [io 0x0070-0x0071]
    [ 0.184726] pnp 00:03: [io 0x0074-0x0077]
    [ 0.184740] pnp 00:03: [irq 8]
    [ 0.184783] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.184802] pnp 00:04: [io 0x00f0]
    [ 0.184810] pnp 00:04: [irq 13]
    [ 0.184854] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.184871] pnp 00:05: [io 0x0061]
    [ 0.184919] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.184938] pnp 00:06: [io 0x0500-0x053f]
    [ 0.184942] pnp 00:06: [io 0x0400-0x047f]
    [ 0.184945] pnp 00:06: [io 0x0092]
    [ 0.184948] pnp 00:06: [io 0x0680-0x06ff]
    [ 0.184951] pnp 00:06: [io 0x0010-0x001f]
    [ 0.184954] pnp 00:06: [io 0x0072-0x0073]
    [ 0.184956] pnp 00:06: [io 0x0080]
    [ 0.184959] pnp 00:06: [io 0x0084-0x0086]
    [ 0.184962] pnp 00:06: [io 0x0088]
    [ 0.184965] pnp 00:06: [io 0x008c-0x008e]
    [ 0.184968] pnp 00:06: [io 0x0090-0x009f]
    [ 0.185047] system 00:06: [io 0x0500-0x053f] has been reserved
    [ 0.185051] system 00:06: [io 0x0400-0x047f] has been reserved
    [ 0.185055] system 00:06: [io 0x0680-0x06ff] has been reserved
    [ 0.185061] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.185320] pnp 00:07: [io 0x0378-0x037f]
    [ 0.185329] pnp 00:07: [irq 7]
    [ 0.185426] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
    [ 0.185514] pnp 00:08: [irq 12]
    [ 0.185563] pnp 00:08: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
    [ 0.185600] pnp 00:09: [io 0x0060]
    [ 0.185604] pnp 00:09: [io 0x0064]
    [ 0.185611] pnp 00:09: [irq 1]
    [ 0.185661] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.185822] pnp 00:0a: [io 0x03f8-0x03ff]
    [ 0.185831] pnp 00:0a: [irq 4]
    [ 0.185938] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.185964] pnp 00:0b: [mem 0xfec00000-0xfec000ff]
    [ 0.186015] pnp 00:0b: Plug and Play ACPI device, IDs PNP0003 (active)
    [ 0.186047] pnp: PnP ACPI: found 12 devices
    [ 0.186049] ACPI: ACPI bus type pnp unregistered
    [ 0.224576] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 0.224583] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 0.224623] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02-02] add_size 200000
    [ 0.224635] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000
    [ 0.224640] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
    [ 0.224651] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000
    [ 0.224656] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000
    [ 0.224667] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 05-05] add_size 1000
    [ 0.224672] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-05] add_size 200000
    [ 0.224692] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
    [ 0.224696] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.224701] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.224705] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.224709] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.224713] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.224717] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.224726] pci 0000:00:1c.0: BAR 15: assigned [mem 0x53700000-0x539fffff pref]
    [ 0.224731] pci 0000:00:1c.1: BAR 15: assigned [mem 0x53a00000-0x53bfffff 64bit pref]
    [ 0.224736] pci 0000:00:1c.2: BAR 15: assigned [mem 0x53c00000-0x53dfffff 64bit pref]
    [ 0.224740] pci 0000:00:1c.3: BAR 15: assigned [mem 0x53e00000-0x53ffffff 64bit pref]
    [ 0.224745] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
    [ 0.224750] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff]
    [ 0.224754] pci 0000:00:1c.3: BAR 13: assigned [io 0x7000-0x7fff]
    [ 0.224761] pci 0000:01:00.0: BAR 6: assigned [mem 0x53080000-0x530fffff pref]
    [ 0.224765] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.224770] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.224775] pci 0000:00:01.0: bridge window [mem 0x52000000-0x530fffff]
    [ 0.224780] pci 0000:00:01.0: bridge window [mem 0x40000000-0x51ffffff pref]
    [ 0.224788] pci 0000:02:00.0: BAR 6: assigned [mem 0x53700000-0x5370ffff pref]
    [ 0.224791] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.224796] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.224802] pci 0000:00:1c.0: bridge window [mem 0x53200000-0x532fffff]
    [ 0.224807] pci 0000:00:1c.0: bridge window [mem 0x53700000-0x539fffff pref]
    [ 0.224815] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.224819] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
    [ 0.224825] pci 0000:00:1c.1: bridge window [mem 0x53400000-0x534fffff]
    [ 0.224831] pci 0000:00:1c.1: bridge window [mem 0x53a00000-0x53bfffff 64bit pref]
    [ 0.224838] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 0.224842] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
    [ 0.224849] pci 0000:00:1c.2: bridge window [mem 0x53500000-0x535fffff]
    [ 0.224854] pci 0000:00:1c.2: bridge window [mem 0x53c00000-0x53dfffff 64bit pref]
    [ 0.224861] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
    [ 0.224865] pci 0000:00:1c.3: bridge window [io 0x7000-0x7fff]
    [ 0.224872] pci 0000:00:1c.3: bridge window [mem 0x53600000-0x536fffff]
    [ 0.224877] pci 0000:00:1c.3: bridge window [mem 0x53e00000-0x53ffffff 64bit pref]
    [ 0.224885] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
    [ 0.224889] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
    [ 0.224895] pci 0000:00:1e.0: bridge window [mem 0x53100000-0x531fffff]
    [ 0.224959] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.224966] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.224969] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.224974] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.224977] pci_bus 0000:01: resource 1 [mem 0x52000000-0x530fffff]
    [ 0.224980] pci_bus 0000:01: resource 2 [mem 0x40000000-0x51ffffff pref]
    [ 0.224984] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.224987] pci_bus 0000:02: resource 1 [mem 0x53200000-0x532fffff]
    [ 0.224990] pci_bus 0000:02: resource 2 [mem 0x53700000-0x539fffff pref]
    [ 0.224994] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
    [ 0.224997] pci_bus 0000:03: resource 1 [mem 0x53400000-0x534fffff]
    [ 0.225001] pci_bus 0000:03: resource 2 [mem 0x53a00000-0x53bfffff 64bit pref]
    [ 0.225004] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
    [ 0.225007] pci_bus 0000:04: resource 1 [mem 0x53500000-0x535fffff]
    [ 0.225011] pci_bus 0000:04: resource 2 [mem 0x53c00000-0x53dfffff 64bit pref]
    [ 0.225014] pci_bus 0000:05: resource 0 [io 0x7000-0x7fff]
    [ 0.225018] pci_bus 0000:05: resource 1 [mem 0x53600000-0x536fffff]
    [ 0.225021] pci_bus 0000:05: resource 2 [mem 0x53e00000-0x53ffffff 64bit pref]
    [ 0.225025] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
    [ 0.225028] pci_bus 0000:06: resource 1 [mem 0x53100000-0x531fffff]
    [ 0.225031] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
    [ 0.225035] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.225091] NET: Registered protocol family 2
    [ 0.225171] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.225391] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.225895] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.226187] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.226190] TCP: reno registered
    [ 0.226195] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.226208] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.226329] NET: Registered protocol family 1
    [ 0.226637] pci 0000:01:00.0: Boot video device
    [ 0.226698] pci 0000:06:08.0: Firmware left e100 interrupts enabled; disabling
    [ 0.226709] PCI: CLS 0 bytes, default 64
    [ 0.226780] Unpacking initramfs...
    [ 0.315303] Freeing initrd memory: 2900k freed
    [ 0.317191] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    [ 0.317195] apm: disabled - APM is not SMP safe.
    [ 0.317515] audit: initializing netlink socket (disabled)
    [ 0.317533] type=2000 audit(1342552654.316:1): initialized
    [ 0.317976] highmem bounce pool size: 64 pages
    [ 0.317984] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.320723] VFS: Disk quotas dquot_6.5.2
    [ 0.320797] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.320931] msgmni has been set to 1740
    [ 0.321235] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.321282] io scheduler noop registered
    [ 0.321287] io scheduler deadline registered
    [ 0.321299] io scheduler cfq registered (default)
    [ 0.321473] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.321588] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.321708] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [ 0.321830] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
    [ 0.321950] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
    [ 0.322243] GHES: HEST is not enabled!
    [ 0.322264] isapnp: Scanning for PnP cards...
    [ 0.678327] isapnp: No Plug & Play device found
    [ 0.678412] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.698985] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.720023] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.720384] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.723503] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.723558] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.723755] mousedev: PS/2 mouse device common for all mice
    [ 0.723869] rtc_cmos 00:03: RTC can wake from S4
    [ 0.724031] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.724060] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
    [ 0.724098] cpuidle: using governor ladder
    [ 0.724101] cpuidle: using governor menu
    [ 0.724316] TCP: cubic registered
    [ 0.724489] NET: Registered protocol family 10
    [ 0.724741] NET: Registered protocol family 17
    [ 0.724748] Registering the dns_resolver key type
    [ 0.724796] Using IPI No-Shortcut mode
    [ 0.724971] PM: Hibernation image not present or could not be loaded.
    [ 0.724985] registered taskstats version 1
    [ 0.725540] rtc_cmos 00:03: setting system clock to 2012-07-17 19:17:35 UTC (1342552655)
    [ 0.725588] Initializing network drop monitor service
    [ 0.726860] Freeing unused kernel memory: 524k freed
    [ 0.727195] Write protecting the kernel text: 3812k
    [ 0.727226] Write protecting the kernel read-only data: 1120k
    [ 0.740567] systemd-udevd[41]: starting version 186
    [ 0.742721] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.745749] SCSI subsystem initialized
    [ 0.749328] libata version 3.00 loaded.
    [ 0.750857] ahci 0000:02:00.0: version 3.0
    [ 0.750961] ahci 0000:02:00.0: irq 45 for MSI/MSI-X
    [ 0.751021] ahci: SSS flag set, parallel bus scan disabled
    [ 0.751069] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
    [ 0.751077] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
    [ 0.752850] scsi0 : ahci
    [ 0.753200] scsi1 : ahci
    [ 0.753383] ata1: SATA max UDMA/133 abar m512@0x53200000 port 0x53200100 irq 45
    [ 0.753391] ata2: SATA max UDMA/133 abar m512@0x53200000 port 0x53200180 irq 45
    [ 1.240043] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.252105] ata1.00: ATA-8: OCZ-SOLID3, 2.15, max UDMA/133
    [ 1.252110] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.262069] ata1.00: configured for UDMA/133
    [ 1.262262] scsi 0:0:0:0: Direct-Access ATA OCZ-SOLID3 2.15 PQ: 0 ANSI: 5
    [ 1.264029] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 1.264196] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.264203] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.264257] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.265654] sda: sda1 sda2 sda3 sda4
    [ 1.266383] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.320034] Refined TSC clocksource calibration: 2999.980 MHz.
    [ 1.320041] Switching to clocksource tsc
    [ 1.746702] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.747318] ata2.00: ATA-8: ST3000DM001-9YN166, CC4C, max UDMA/133
    [ 1.747323] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.747889] ata2.00: configured for UDMA/133
    [ 1.748030] scsi 1:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4C PQ: 0 ANSI: 5
    [ 1.748540] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
    [ 1.748547] sd 1:0:0:0: [sdb] 4096-byte physical blocks
    [ 1.748667] sd 1:0:0:0: [sdb] Write Protect is off
    [ 1.748674] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.748725] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.793835] sdb: sdb1
    [ 1.794347] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 1.892420] usbcore: registered new interface driver usbfs
    [ 1.892471] usbcore: registered new interface driver hub
    [ 1.895559] ata_piix 0000:00:1f.1: version 2.13
    [ 1.895639] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 1.897473] usbcore: registered new device driver usb
    [ 1.898382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.898429] scsi2 : ata_piix
    [ 1.899754] scsi3 : ata_piix
    [ 1.900600] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
    [ 1.900605] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
    [ 1.900676] ata4: port disabled--ignoring
    [ 1.901417] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [ 1.901473] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 1.904508] scsi4 : ata_piix
    [ 1.905087] scsi5 : ata_piix
    [ 1.905220] ata5: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
    [ 1.905227] ata6: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
    [ 1.905347] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 1.905355] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 1.905401] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [ 1.905444] ehci_hcd 0000:00:1d.7: debug port 1
    [ 1.905558] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.909355] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.909393] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x53304000
    [ 1.916865] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.917873] hub 1-0:1.0: USB hub found
    [ 1.917883] hub 1-0:1.0: 8 ports detected
    [ 1.918079] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.918087] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.918109] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.918149] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
    [ 1.918445] hub 2-0:1.0: USB hub found
    [ 1.918456] hub 2-0:1.0: 2 ports detected
    [ 1.918663] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.918671] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.918692] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [ 1.918728] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
    [ 1.919043] hub 3-0:1.0: USB hub found
    [ 1.919053] hub 3-0:1.0: 2 ports detected
    [ 1.919306] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.919314] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.919338] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 1.919391] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
    [ 1.919771] hub 4-0:1.0: USB hub found
    [ 1.919781] hub 4-0:1.0: 2 ports detected
    [ 1.920058] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 1.920066] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 1.920085] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [ 1.920162] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
    [ 1.920720] hub 5-0:1.0: USB hub found
    [ 1.920731] hub 5-0:1.0: 2 ports detected
    [ 2.068266] ata6.00: ATA-6: WDC WD2000JD-00HBB0, 08.02D08, max UDMA/133
    [ 2.068272] ata6.00: 390721968 sectors, multi 16: LBA48
    [ 2.074099] ata5.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
    [ 2.074104] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.081454] ata6.00: configured for UDMA/133
    [ 2.100167] ata5.01: ATA-8: ST3500418AS, CC34, max UDMA/133
    [ 2.100172] ata5.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.107102] ata5.00: configured for UDMA/133
    [ 2.162850] ata5.01: configured for UDMA/133
    [ 2.173642] ata3.00: ATAPI: SONY DVD RW DRU-530A, 2.1g, max UDMA/33
    [ 2.173649] ata3.01: ATAPI: LITE-ON DVDRW SOHW-1633S, BGS4, max UDMA/66
    [ 2.173654] ata3.01: limited to UDMA/33 due to 40-wire cable
    [ 2.186862] ata3.00: configured for UDMA/33
    [ 2.200194] ata3.01: configured for UDMA/33
    [ 2.201725] scsi 2:0:0:0: CD-ROM SONY DVD RW DRU-530A 2.1g PQ: 0 ANSI: 5
    [ 2.202839] scsi 2:0:1:0: CD-ROM LITE-ON DVDRW SOHW-1633S BGS4 PQ: 0 ANSI: 5
    [ 2.203271] scsi 4:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
    [ 2.203548] sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 2.203557] sd 4:0:0:0: [sdc] 4096-byte physical blocks
    [ 2.203683] sd 4:0:0:0: [sdc] Write Protect is off
    [ 2.203690] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 2.203749] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.203803] scsi 4:0:1:0: Direct-Access ATA ST3500418AS CC34 PQ: 0 ANSI: 5
    [ 2.204553] scsi 5:0:0:0: Direct-Access ATA WDC WD2000JD-00H 08.0 PQ: 0 ANSI: 5
    [ 2.204737] sd 4:0:1:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.204849] sd 5:0:0:0: [sde] 390721968 512-byte logical blocks: (200 GB/186 GiB)
    [ 2.204969] sd 5:0:0:0: [sde] Write Protect is off
    [ 2.204976] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
    [ 2.205029] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.223374] usb 1-2: new high-speed USB device number 2 using ehci_hcd
    [ 2.225847] sdc: sdc1
    [ 2.225864] sd 4:0:1:0: [sdd] Write Protect is off
    [ 2.225872] sd 4:0:1:0: [sdd] Mode Sense: 00 3a 00 00
    [ 2.225944] sd 4:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.226606] sd 4:0:0:0: [sdc] Attached SCSI disk
    [ 2.242524] sdd: sdd1
    [ 2.243011] sd 4:0:1:0: [sdd] Attached SCSI disk
    [ 2.250598] sde: sde2 sde3 < sde5 sde6 >
    [ 2.251325] sd 5:0:0:0: [sde] Attached SCSI disk
    [ 2.263852] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    [ 2.263860] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.265692] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 2.269125] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    [ 2.270115] sr 2:0:1:0: Attached scsi CD-ROM sr1
    [ 2.453377] usb 1-3: new high-speed USB device number 3 using ehci_hcd
    [ 2.630176] input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.1/input/input1
    [ 2.630296] generic-usb 0003:1058:1102.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-3/input1
    [ 2.630361] usbcore: registered new interface driver usbhid
    [ 2.630366] usbhid: USB HID core driver
    [ 2.720033] usb 1-5: new high-speed USB device number 4 using ehci_hcd
    [ 2.992001] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.123459] usb 5-1: new low-speed USB device number 2 using uhci_hcd
    [ 3.170371] systemd[1]: systemd 186 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP; arch)
    [ 3.189960] systemd[1]: Inserted module 'autofs4'
    [ 3.190421] systemd[1]: Set hostname to <bbq>.
    [ 3.347408] systemd[1]: Cannot add dependency job for unit exportfs.service, ignoring: Unit exportfs.service failed to load: No such file or directory. See system logs and 'systemctl status exportfs.service' for details.
    [ 3.347444] systemd[1]: Cannot add dependency job for unit arch-daemons.target, ignoring: Unit arch-daemons.target failed to load: No such file or directory. See system logs and 'systemctl status arch-daemons.target' for details.
    [ 3.347509] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 3.600924] systemd-readahead[134]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
    [ 3.890242] systemd-udevd[139]: starting version 186
    [ 3.928976] systemd-journald[146]: Fixed max_use=50.2M max_size=6.2M min_size=64.0K keep_free=25.1M
    [ 3.929449] systemd-journald[146]: Vacuuming...
    [ 4.016020] FS-Cache: Loaded
    [ 4.026904] RPC: Registered named UNIX socket transport module.
    [ 4.026909] RPC: Registered udp transport module.
    [ 4.026912] RPC: Registered tcp transport module.
    [ 4.026914] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 4.068138] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 4.071885] NFS: Registering the id_resolver key type
    [ 4.071920] FS-Cache: Netfs 'nfs' registered for caching
    [ 4.090493] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 4.103300] Installing knfsd (copyright (C) 1996 [email protected]).
    [ 4.106821] ACPI: Sleep Button [SLPB]
    [ 4.114494] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.114509] ACPI: Power Button [PWRF]
    [ 4.135074] parport_pc 00:07: reported by Plug and Play ACPI
    [ 4.135106] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    [ 4.157067] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 4.178255] Linux agpgart interface v0.103
    [ 4.202375] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 4.203197] hda_intel: Disabling MSI
    [ 4.255263] intel_rng: Firmware space is locked read-only. If you can't or
    [ 4.255267] intel_rng: don't want to disable this in firmware setup, and if
    [ 4.255271] intel_rng: you are certain that your system has a functional
    [ 4.255274] intel_rng: RNG, try using the 'no_fwh_detect' option.
    [ 4.273750] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    [ 4.273757] e100: Copyright(c) 1999-2006 Intel Corporation
    [ 4.274079] iTCO_vendor_support: vendor-support=0
    [ 4.285411] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 4.285661] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0460)
    [ 4.285769] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.380102] usbcore: registered new interface driver uas
    [ 4.415911] Initializing USB Mass Storage driver...
    [ 4.423630] scsi6 : usb-storage 1-3:1.0
    [ 4.423883] usbcore: registered new interface driver usb-storage
    [ 4.423888] USB Mass Storage support registered.
    [ 4.426642] e100 0000:06:08.0: eth0: addr 0x53100000, irq 20, MAC addr 00:11:11:9d:19:91
    [ 4.434273] scsi7 : usb-storage 1-5:1.0
    [ 4.434499] usbcore: registered new interface driver ums-cypress
    [ 4.475410] psmouse serio1: hgpk: ID: 10 00 64
    [ 4.480175] firewire_ohci 0000:06:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
    [ 4.487522] microcode: CPU0 sig=0xf41, pf=0x10, revision=0xd
    [ 4.506728] Registered IR keymap rc-ati-x10
    [ 4.507019] input: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/rc/rc0/input5
    [ 4.507357] rc0: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/rc/rc0
    [ 4.507587] input: X10 Wireless Technology Inc USB Receiver mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input6
    [ 4.507783] usbcore: registered new interface driver ati_remote
    [ 4.530507] psmouse serio1: logips2pp: Detected unknown Logitech mouse model 127
    [ 4.687581] ppdev: user-space parallel port driver
    [ 4.761362] Adding 1047928k swap on /dev/sda2. Priority:-1 extents:1 across:1047928k SS
    [ 4.804984] microcode: CPU1 sig=0xf41, pf=0x10, revision=0xd
    [ 4.814875] nvidia: module license 'NVIDIA' taints kernel.
    [ 4.814882] Disabling lock debugging due to kernel taint
    [ 4.822000] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 4.926478] fuse init (API version 7.18)
    [ 4.970217] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
    [ 4.971016] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
    [ 4.971676] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
    [ 4.971943] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
    [ 4.980870] firewire_core 0000:06:05.0: created device fw0: GUID 00111100009d1991, S400
    [ 4.981627] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 4.982035] NVRM: loading NVIDIA UNIX x86 Kernel Module 302.17 Tue Jun 12 18:37:51 PDT 2012
    [ 5.031213] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input11
    [ 5.432483] scsi 6:0:0:0: Direct-Access WD My Book 1028 PQ: 0 ANSI: 4
    [ 5.436924] sd 6:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 5.437226] scsi 7:0:0:0: Direct-Access WDC WD25 00JB-00GVA0 PQ: 0 ANSI: 0
    [ 5.438100] sd 7:0:0:0: [sdg] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 5.439101] sd 7:0:0:0: [sdg] Write Protect is off
    [ 5.439109] sd 7:0:0:0: [sdg] Mode Sense: 33 00 00 00
    [ 5.439482] sd 6:0:0:0: [sdf] Write Protect is off
    [ 5.439489] sd 6:0:0:0: [sdf] Mode Sense: 10 00 00 00
    [ 5.440101] sd 7:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 5.442224] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 5.463763] sdg: sdg1 sdg2
    [ 5.467100] sd 7:0:0:0: [sdg] Attached SCSI disk
    [ 5.469267] sdf: sdf1
    [ 5.491846] sd 6:0:0:0: [sdf] Attached SCSI disk
    [ 36.480046] usb 1-5: reset high-speed USB device number 4 using ehci_hcd
    [ 37.347138] systemd-journald[146]: Fixed max_use=1.4G max_size=128.0M min_size=64.0K keep_free=765.3M
    [ 37.347165] systemd-journald[146]: Flushing to /var...
    [ 37.837240] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
    [ 37.906826] EXT4-fs (sdg2): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.068461] EXT4-fs (sde6): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.194403] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.740678] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
    [ 38.747081] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
    [ 39.486016] ip_tables: (C) 2000-2006 Netfilter Core Team
    [ 39.599796] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
    [ 39.600119] NFSD: starting 90-second grace period
    [ 40.579508] Netfilter messages via NETLINK v0.30.
    [ 40.594917] nf_conntrack version 0.5.0 (16078 buckets, 64312 max)
    [ 40.746099] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [ 40.747318] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
    [ 40.747325] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
    [ 40.786415] ctnetlink v0.93: registering with nfnetlink.
    [ 40.886321] ip_set: protocol 6
    [ 40.898284] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
    [ 41.762042] xt_time: kernel timezone is -0000
    [ 42.318176] Bridge firewalling registered
    [ 42.704278] u32 classifier
    [ 42.704284] input device check on
    [ 42.704287] Actions configured
    [ 43.154527] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 43.156826] e100 0000:06:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
    [ 43.157214] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 44.557798] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 44.872612] [drm] Initialized drm 1.1.0 20060810
    [ 44.881629] wmi: Mapper loaded
    [ 51.096207] zram: module is from the staging directory, the quality is unknown, you have been warned.
    [ 51.105163] zram: Unknown parameter `zram_num_devices'
    [ 51.148183] zram: module is from the staging directory, the quality is unknown, you have been warned.
    [ 51.148690] zram: Creating 2 devices ...
    [ 51.398897] Adding 514496k swap on /dev/zram0. Priority:100 extents:1 across:514496k SS
    [ 51.406500] Adding 514496k swap on /dev/zram1. Priority:100 extents:1 across:514496k SS
    [ 76.005728] bootchart-collector started as pid 1586 with 2 args: '--dump' '/tmp/bootchart.94K3Fb6yom'
    [ 76.005734] Extracting profile data from pid 178
    [ 76.005736] map 0xbfe14000 -> 0xbfe35000 size: 132k from 'bfe14000' 'bfe35000'
    [ 76.005739] read 135168 bytes of 135168
    [ 76.005741] reading 101 chunks (of 101) ... wrote 12527 kb
    [ 76.005743] bootchart-collector pid: 1586 unmounted proc / clean exit
    Linux 3.3.8-1, Nvidia 295.49-1 Dmesg Output
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.3.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 5 13:24:07 UTC 2012
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe54000 (usable)
    [ 0.000000] BIOS-e820: 000000003fe54000 - 000000003fee8000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000003fee8000 - 000000003ff00000 (ACPI data)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.3 present.
    [ 0.000000] DMI: 507GR /D915GAG, BIOS AG91510J.15A.0816.2005.0214.1818 02/14/2005
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x3fe54 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FC0000000 write-back
    [ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00fe650] fe650
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
    [ 0.000000] RAMDISK: 3fb70000 - 3fe44000
    [ 0.000000] Allocated new RAMDISK: 3752a000 - 377fd833
    [ 0.000000] Move RAMDISK from 000000003fb70000 - 000000003fe43832 to 3752a000 - 377fd832
    [ 0.000000] ACPI: RSDP 000fe020 00014 (v00 GATEWA)
    [ 0.000000] ACPI: RSDT 3fefde48 00038 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACP 3fefcf10 00074 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 3fef8010 0339C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: FACS 3fee5c40 00040
    [ 0.000000] ACPI: APIC 3fefce10 00068 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: WDDT 3fef7f90 00040 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 3fef7f10 0003C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 3fef6d90 00124 (v01 GATEWA CpuPm 00000330 MSFT 01000013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 134MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0003fe54
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0003fe54
    [ 0.000000] On node 0 totalpages: 261603
    [ 0.000000] free_area_init_node: node 0, pgdat c060c580, node_mem_map f6d29200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 269 pages used for memmap
    [ 0.000000] HighMem zone: 34121 pages, LIFO batch:7
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:c0100000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6d08000 s30848 r0 d22400 u53248
    [ 0.000000] pcpu-alloc: s30848 r0 d22400 u53248 alloc=13*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259558
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/10f8033d-8fe9-46be-bccf-68a14025bbaa ro init=/bin/systemd
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 2093600 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fe54)
    [ 0.000000] Memory: 1025660k/1046864k available (3774k kernel code, 20752k reserved, 1434k data, 520k init, 137560k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc0617000 - 0xc0699000 ( 520 kB)
    [ 0.000000] .data : 0xc04af9a9 - 0xc0616400 (1434 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc04af9a9 (3774 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 3000.097 MHz processor.
    [ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.20 BogoMIPS (lpj=10000323)
    [ 0.006674] pid_max: default: 32768 minimum: 301
    [ 0.006706] Security Framework initialized
    [ 0.006712] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006735] Mount-cache hash table entries: 512
    [ 0.006921] Initializing cgroup subsys cpuacct
    [ 0.006925] Initializing cgroup subsys memory
    [ 0.006936] Initializing cgroup subsys devices
    [ 0.006939] Initializing cgroup subsys freezer
    [ 0.006942] Initializing cgroup subsys net_cls
    [ 0.006945] Initializing cgroup subsys blkio
    [ 0.006989] CPU: Physical Processor ID: 0
    [ 0.006992] CPU: Processor Core ID: 0
    [ 0.006995] mce: CPU supports 4 MCE banks
    [ 0.007009] CPU0: Thermal monitoring enabled (TM1)
    [ 0.007014] using mwait in idle threads.
    [ 0.010636] ACPI: Core revision 20120111
    [ 0.013347] ftrace: allocating 16622 entries in 33 pages
    [ 0.020077] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.020459] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.054563] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
    [ 0.056663] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
    [ 0.056663] ... version: 0
    [ 0.056663] ... bit width: 40
    [ 0.056663] ... generic registers: 18
    [ 0.056663] ... value mask: 000000ffffffffff
    [ 0.056663] ... max period: 0000007fffffffff
    [ 0.056663] ... fixed-purpose events: 0
    [ 0.056663] ... event mask: 000000000003ffff
    [ 0.073415] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.100018] CPU 1 irqstacks, hard=f64a4000 soft=f64a6000
    [ 0.100021] Booting Node 0, Processors #1 Ok.
    [ 0.100025] smpboot cpu 1: start_ip = 9a000
    [ 0.009999] Initializing CPU#1
    [ 0.113372] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.120000] Brought up 2 CPUs
    [ 0.120006] Total of 2 processors activated (12005.40 BogoMIPS).
    [ 0.120978] devtmpfs: initialized
    [ 0.120978] PM: Registering ACPI NVS region at 3fe54000 (606208 bytes)
    [ 0.120978] NET: Registered protocol family 16
    [ 0.120978] ACPI: bus type pci registered
    [ 0.120978] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.120978] PCI: not using MMCONFIG
    [ 0.123293] PCI: Using configuration type 1 for base access
    [ 0.126717] bio: create slab <bio-0> at 0
    [ 0.126739] ACPI: Added _OSI(Module Device)
    [ 0.126739] ACPI: Added _OSI(Processor Device)
    [ 0.126739] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.126739] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.127496] ACPI: EC: Look up EC in DSDT
    [ 0.127496] ACPI: Interpreter enabled
    [ 0.127496] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.127496] ACPI: Using IOAPIC for interrupt routing
    [ 0.127496] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.127496] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.127496] PCI: Using MMCONFIG for extended config space
    [ 0.131872] ACPI: No dock devices found.
    [ 0.131883] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.133334] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.136111] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.136116] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.136120] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.136123] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000fffff] (ignored)
    [ 0.136127] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff] (ignored)
    [ 0.136131] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xe0000000] (ignored)
    [ 0.136134] PCI: root bus 00: using default resources
    [ 0.136196] PCI host bridge to bus 0000:00
    [ 0.136201] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.136206] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [ 0.136220] pci 0000:00:00.0: [8086:2580] type 0 class 0x000600
    [ 0.136283] pci 0000:00:01.0: [8086:2581] type 1 class 0x000604
    [ 0.136340] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.13639

    And here is the output of alsa-info.sh which I have also added to the original post:
    upload=true&script=true&cardinfo=
    !!ALSA Information Script v 0.4.61
    !!Script ran on: Wed Jul 18 00:10:56 UTC 2012
    !!Linux Distribution
    Arch Linux \r (\l) DISTRIB_ID=archlinux DISTRIB_DESCRIPTION="Arch Linux" NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="http://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
    !!DMI Information
    Manufacturer:
    Product Name: 507GR
    Product Version:
    Firmware Version: AG91510J.15A.0816.2005.0214.1818
    !!Kernel Information
    Kernel release: 3.4.4-3-ARCH
    Operating System: GNU/Linux
    Architecture: i686
    Processor: unknown
    SMP Enabled: Yes
    !!ALSA Version
    Driver version: 1.0.25
    Library version: 1.0.25
    Utilities version: 1.0.25
    !!Loaded ALSA modules
    snd_hda_intel
    snd_hda_intel
    !!Sound Servers on this system
    Jack:
    Installed - Yes (/usr/bin/jackd)
    Running - No
    !!Soundcards recognised by ALSA
    0 [Intel ]: HDA-Intel - HDA Intel
    HDA Intel at 0x53300000 irq 46
    1 [NVidia ]: HDA-Intel - HDA NVidia
    HDA NVidia at 0x53000000 irq 17
    !!PCI Soundcards installed in the system
    00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
    01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
    !!Advanced information - PCI Vendor/Device/Subsystem ID's
    00:1b.0 0403: 8086:2668 (rev 03)
    Subsystem: 107b:4037
    01:00.1 0403: 10de:0be3 (rev a1)
    Subsystem: 1043:8354
    !!Loaded sound module options
    !!Module: snd_hda_intel
    align_buffer_size : -1
    bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
    enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
    enable_msi : -1
    id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    power_save : 0
    power_save_controller : Y
    probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    single_cmd : N
    snoop : Y
    !!Module: snd_hda_intel
    align_buffer_size : -1
    bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
    enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
    enable_msi : -1
    id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    power_save : 0
    power_save_controller : Y
    probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    single_cmd : N
    snoop : Y
    !!HDA-Intel Codec information
    --startcollapse--
    Codec: Realtek ALC880
    Address: 2
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10ec0880
    Subsystem Id: 0x08600000
    Revision Id: 0x90000
    No Modem Function Group found
    Default PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
    IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
    IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
    Node 0x02 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x03 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x04 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x05 [Audio Output] wcaps 0x411: Stereo
    Converter: stream=0, channel=0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
    Node 0x07 [Vendor Defined Widget] wcaps 0xf0051b: Stereo Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
    Amp-In vals:
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Connection: 0
    Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
    Converter: stream=0, channel=0
    SDI-Select: 0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Connection: 7
    0x18 0x19 0x1a* 0x1b 0x1c 0x14 0x15
    Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
    Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
    Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
    Converter: stream=0, channel=0
    SDI-Select: 0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
    Power states: D0 D1 D2 D3
    Power: setting=D0, actual=D0
    Connection: 10
    0x18 0x19 0x1a 0x1b 0x1c* 0x0b 0x14 0x15 0x16 0x17
    Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
    Converter: stream=0, channel=0
    SDI-Select: 0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x1f
    Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
    Control: name="Beep Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=5, ofs=0
    Control: name="Beep Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=5, ofs=0
    Amp-In caps: ofs=0x23, nsteps=0x41, stepsize=0x03, mute=1
    Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0xa3 0xa3] [0x80 0x80] [0x80 0x80]
    Connection: 8
    0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15
    Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x02 0x0b
    Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x03 0x0b
    Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x04 0x0b
    Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
    Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-In vals: [0x00 0x00] [0x80 0x80]
    Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
    Amp-Out vals: [0x40 0x40]
    Connection: 2
    0x05 0x0b
    Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x11 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x12 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x13 [Audio Selector] wcaps 0x300101: Stereo
    Connection: 4
    0x0c* 0x0d 0x0e 0x0f
    Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x0c
    Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x0d
    Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x0e
    Node 0x17 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Connection: 0
    Node 0x18 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x10
    Node 0x19 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x11
    Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Control: name="Line Jack", index=0, device=0
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x01810000: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x12
    Node 0x1b [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Connection: 1
    0x13
    Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
    Pincap 0x00000020: IN
    Pin Default 0x40000000: [N/A] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Node 0x1d [Pin Complex] wcaps 0x400000: Mono
    Pincap 0x00000020: IN
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
    Pincap 0x00000010: OUT
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Connection: 1
    0x06
    Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
    Pincap 0x00000020: IN
    Pin Default 0x00000000: [Jack] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x0, Sequence = 0x0
    Pin-ctls: 0x00:
    Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
    Processing caps: benign=0, ncoeff=10
    Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
    Volume-Knob: delta=0, steps=64, direct=0, val=0
    Unsolicited: tag=00, enabled=0
    Connection: 0
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 0
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=0, device=0
    Control: name="IEC958 Playback Pro Mask", index=0, device=0
    Control: name="IEC958 Playback Default", index=0, device=0
    Control: name="IEC958 Playback Switch", index=0, device=0
    Control: name="ELD", index=0, device=3
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 1
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=1, device=0
    Control: name="IEC958 Playback Pro Mask", index=1, device=0
    Control: name="IEC958 Playback Default", index=1, device=0
    Control: name="IEC958 Playback Switch", index=1, device=0
    Control: name="ELD", index=0, device=7
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 2
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=2, device=0
    Control: name="IEC958 Playback Pro Mask", index=2, device=0
    Control: name="IEC958 Playback Default", index=2, device=0
    Control: name="IEC958 Playback Switch", index=2, device=0
    Control: name="ELD", index=0, device=8
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    Codec: Nvidia GPU 0b HDMI/DP
    Address: 3
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x10de000b
    Subsystem Id: 0x10de0101
    Revision Id: 0x100200
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0xe]: 16 20 24
    formats [0x5]: PCM AC3
    Unsolicited: tag=00, enabled=0
    Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
    Control: name="HDMI/DP,pcm=9 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=3, device=0
    Control: name="IEC958 Playback Pro Mask", index=3, device=0
    Control: name="IEC958 Playback Default", index=3, device=0
    Control: name="IEC958 Playback Switch", index=3, device=0
    Control: name="ELD", index=0, device=9
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x00:
    Unsolicited: tag=01, enabled=1
    Connection: 1
    0x04
    --endcollapse--
    !!ALSA Device nodes
    crw-rw----+ 1 root audio 116, 3 Jul 17 17:07 /dev/snd/controlC0
    crw-rw----+ 1 root audio 116, 12 Jul 17 17:07 /dev/snd/controlC1
    crw-rw----+ 1 root audio 116, 2 Jul 17 17:07 /dev/snd/hwC0D2
    crw-rw----+ 1 root audio 116, 11 Jul 17 17:07 /dev/snd/hwC1D0
    crw-rw----+ 1 root audio 116, 10 Jul 17 17:07 /dev/snd/hwC1D1
    crw-rw----+ 1 root audio 116, 9 Jul 17 17:07 /dev/snd/hwC1D2
    crw-rw----+ 1 root audio 116, 8 Jul 17 17:07 /dev/snd/hwC1D3
    crw-rw----+ 1 root audio 116, 7 Jul 17 17:07 /dev/snd/pcmC1D3p
    crw-rw----+ 1 root audio 116, 6 Jul 17 17:07 /dev/snd/pcmC1D7p
    crw-rw----+ 1 root audio 116, 5 Jul 17 17:07 /dev/snd/pcmC1D8p
    crw-rw----+ 1 root audio 116, 4 Jul 17 17:07 /dev/snd/pcmC1D9p
    crw-rw---- 1 root audio 116, 1 Jul 17 17:07 /dev/snd/seq
    crw-rw----+ 1 root audio 116, 33 Jul 17 17:07 /dev/snd/timer
    /dev/snd/by-path:
    total 0
    drwxr-xr-x 2 root root 80 Jul 17 17:07 .
    drwxr-xr-x 3 root root 320 Jul 17 17:07 ..
    lrwxrwxrwx 1 root root 12 Jul 17 17:07 pci-0000:00:1b.0 -> ../controlC0
    lrwxrwxrwx 1 root root 12 Jul 17 17:07 pci-0000:01:00.1 -> ../controlC1
    !!Aplay/Arecord output
    APLAY
    **** List of PLAYBACK Hardware Devices ****
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    ARECORD
    **** List of CAPTURE Hardware Devices ****
    !!Amixer output
    !!-------Mixer controls for card 0 [Intel]
    Card hw:0 'Intel'/'HDA Intel at 0x53300000 irq 46'
    Mixer name : 'Realtek ALC880'
    Components : 'HDA:10ec0880,08600000,00090000'
    Controls : 4
    Simple ctrls : 2
    Simple mixer control 'PCM',0
    Capabilities: pvolume penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 255
    Mono:
    Front Left: Playback 255 [100%] [0.00dB]
    Front Right: Playback 255 [100%] [0.00dB]
    Simple mixer control 'Beep',0
    Capabilities: pvolume pswitch penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 65
    Mono:
    Front Left: Playback 35 [54%] [0.00dB] [off]
    Front Right: Playback 35 [54%] [0.00dB] [off]
    !!-------Mixer controls for card 1 [NVidia]
    Card hw:1 'NVidia'/'HDA NVidia at 0x53000000 irq 17'
    Mixer name : 'Nvidia GPU 0b HDMI/DP'
    Components : 'HDA:10de000b,10de0101,00100200'
    Controls : 24
    Simple ctrls : 4
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'IEC958',1
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'IEC958',2
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'IEC958',3
    Capabilities: pswitch pswitch-joined penum
    Playback channels: Mono
    Mono: Playback [on]
    !!Alsactl output
    --startcollapse--
    state.Intel {
    control.1 {
    iface MIXER
    name 'Beep Playback Volume'
    value.0 35
    value.1 35
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 65'
    dbmin -3500
    dbmax 3000
    dbvalue.0 0
    dbvalue.1 0
    control.2 {
    iface MIXER
    name 'Beep Playback Switch'
    value.0 false
    value.1 false
    comment {
    access 'read write'
    type BOOLEAN
    count 2
    control.3 {
    iface CARD
    name 'Line Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.4 {
    iface MIXER
    name 'PCM Playback Volume'
    value.0 255
    value.1 255
    comment {
    access 'read write user'
    type INTEGER
    count 2
    range '0 - 255'
    tlv '0000000100000008ffffec1400000014'
    dbmin -5100
    dbmax 0
    dbvalue.0 0
    dbvalue.1 0
    state.NVidia {
    control.1 {
    iface CARD
    name 'HDMI/DP,pcm=3 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.2 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.3 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.4 {
    iface MIXER
    name 'IEC958 Playback Default'
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.5 {
    iface MIXER
    name 'IEC958 Playback Switch'
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.6 {
    iface PCM
    device 3
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    control.7 {
    iface CARD
    name 'HDMI/DP,pcm=7 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.8 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    index 1
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.9 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    index 1
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.10 {
    iface MIXER
    name 'IEC958 Playback Default'
    index 1
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.11 {
    iface MIXER
    name 'IEC958 Playback Switch'
    index 1
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.12 {
    iface PCM
    device 7
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    control.13 {
    iface CARD
    name 'HDMI/DP,pcm=8 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.14 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    index 2
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.15 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    index 2
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.16 {
    iface MIXER
    name 'IEC958 Playback Default'
    index 2
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.17 {
    iface MIXER
    name 'IEC958 Playback Switch'
    index 2
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.18 {
    iface PCM
    device 8
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    control.19 {
    iface CARD
    name 'HDMI/DP,pcm=9 Jack'
    value false
    comment {
    access read
    type BOOLEAN
    count 1
    control.20 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    index 3
    value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.21 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    index 3
    value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.22 {
    iface MIXER
    name 'IEC958 Playback Default'
    index 3
    value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.23 {
    iface MIXER
    name 'IEC958 Playback Switch'
    index 3
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.24 {
    iface PCM
    device 9
    name ELD
    value ''
    comment {
    access read
    type BYTES
    count 0
    --endcollapse--
    !!All Loaded Modules
    Module
    zram
    lm85
    hwmon_vid
    aes_i586
    cryptd
    aes_generic
    act_police
    cls_basic
    cls_flow
    cls_fw
    cls_u32
    sch_tbf
    sch_prio
    sch_htb
    sch_hfsc
    sch_ingress
    sch_sfq
    bridge
    stp
    llc
    xt_statistic
    xt_CT
    xt_LOG
    xt_time
    xt_connlimit
    xt_realm
    xt_addrtype
    iptable_raw
    xt_comment
    xt_recent
    xt_policy
    ipt_ULOG
    ipt_REJECT
    ipt_REDIRECT
    ipt_NETMAP
    ipt_MASQUERADE
    ipt_ECN
    ipt_CLUSTERIP
    ipt_ah
    xt_set
    ip_set
    nf_nat_tftp
    nf_nat_snmp_basic
    nf_conntrack_snmp
    nf_nat_sip
    nf_nat_pptp
    nf_nat_proto_gre
    nf_nat_irc
    nf_nat_h323
    nf_nat_ftp
    nf_nat_amanda
    ts_kmp
    nf_conntrack_amanda
    nf_conntrack_sane
    nf_conntrack_tftp
    nf_conntrack_sip
    nf_conntrack_proto_udplite
    nf_conntrack_proto_sctp
    nf_conntrack_pptp
    nf_conntrack_proto_gre
    nf_conntrack_netlink
    nf_conntrack_netbios_ns
    nf_conntrack_broadcast
    nf_conntrack_irc
    nf_conntrack_h323
    nf_conntrack_ftp
    xt_TPROXY
    nf_defrag_ipv6
    nf_tproxy_core
    ip6_tables
    xt_tcpmss
    xt_pkttype
    xt_physdev
    xt_owner
    xt_NFQUEUE
    xt_NFLOG
    nfnetlink_log
    xt_multiport
    xt_mark
    xt_mac
    xt_limit
    xt_length
    xt_iprange
    xt_helper
    xt_hashlimit
    xt_DSCP
    xt_dscp
    xt_dccp
    xt_conntrack
    xt_connmark
    xt_CLASSIFY
    xt_AUDIT
    xt_state
    iptable_nat
    nf_nat
    nf_conntrack_ipv4
    nf_defrag_ipv4
    nf_conntrack
    iptable_mangle
    nfnetlink
    xt_tcpudp
    iptable_filter
    ip_tables
    x_tables
    arc4
    fuse
    nvidia
    snd_hda_codec_hdmi
    ppdev
    ath9k_htc
    ath9k_common
    microcode
    ath9k_hw
    ath
    serio_raw
    psmouse
    evdev
    mac80211
    ums_cypress
    cfg80211
    compat
    usb_storage
    rfkill
    i2c_i801
    uas
    rc_ati_x10
    iTCO_wdt
    firewire_ohci
    ati_remote
    iTCO_vendor_support
    e100
    firewire_core
    mii
    rc_core
    crc_itu_t
    snd_hda_codec_realtek
    parport_pc
    parport
    snd_hda_intel
    snd_hda_codec
    snd_pcm
    snd_page_alloc
    snd_hwdep
    snd_timer
    nfsd
    exportfs
    intel_agp
    intel_gtt
    snd
    nfs
    i2c_core
    agpgart
    nfs_acl
    lockd
    soundcore
    auth_rpcgss
    button
    processor
    sunrpc
    fscache
    autofs4
    ext4
    crc16
    jbd2
    mbcache
    usbhid
    hid
    sr_mod
    cdrom
    pata_acpi
    ata_generic
    uhci_hcd
    ata_piix
    ehci_hcd
    usbcore
    usb_common
    sd_mod
    ahci
    libahci
    libata
    scsi_mod
    !!Sysfs Files
    /sys/class/sound/hwC0D2/init_pin_configs:
    0x14 0x00000000
    0x15 0x00000000
    0x16 0x00000000
    0x17 0x00000000
    0x18 0x00000000
    0x19 0x00000000
    0x1a 0x01810000
    0x1b 0x00000000
    0x1c 0x40000000
    0x1d 0x00000000
    0x1e 0x00000000
    0x1f 0x00000000
    /sys/class/sound/hwC0D2/driver_pin_configs:
    /sys/class/sound/hwC0D2/user_pin_configs:
    /sys/class/sound/hwC0D2/init_verbs:
    /sys/class/sound/hwC1D0/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D0/driver_pin_configs:
    /sys/class/sound/hwC1D0/user_pin_configs:
    /sys/class/sound/hwC1D0/init_verbs:
    /sys/class/sound/hwC1D1/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D1/driver_pin_configs:
    /sys/class/sound/hwC1D1/user_pin_configs:
    /sys/class/sound/hwC1D1/init_verbs:
    /sys/class/sound/hwC1D2/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D2/driver_pin_configs:
    /sys/class/sound/hwC1D2/user_pin_configs:
    /sys/class/sound/hwC1D2/init_verbs:
    /sys/class/sound/hwC1D3/init_pin_configs:
    0x05 0x18560010
    /sys/class/sound/hwC1D3/driver_pin_configs:
    /sys/class/sound/hwC1D3/user_pin_configs:
    /sys/class/sound/hwC1D3/init_verbs:
    !!ALSA/HDA dmesg
    [ 3.398568] Installing knfsd (copyright (C) 1996 [email protected]).
    [ 3.431145] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 3.462799] parport_pc 00:07: reported by Plug and Play ACPI
    [ 3.462832] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    [ 3.467010] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 3.468096] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    [ 3.471112] hda_intel: Disabling MSI
    [ 3.522125] intel_rng: Firmware space is locked read-only. If you can't or
    [ 4.173059] ath9k_htc 1-2:1.0: ath9k_htc: HTC initialized with 45 credits
    [ 4.263632] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
    [ 4.263914] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
    [ 4.264134] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
    [ 4.264423] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
    [ 4.267027] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    I'll also see what kind of help I can get from the developers upstream.

  • [SOLVED] EDID read invalid with nvidia-313.18

    Hello All,
    after several months of trouble-free operation, my main system started having issues with detecting my second monitor properly. I am quite sure that this has something to do with the latest nvidia driver (313.18) but since I don't use this machine daily, I can't say exactly.
    First, what's the problem? I have an nVidia GTX 460 card with two 26" TFTs @1920x1200 attached. No special configuration file has been necessary for some time now (everything detected automatically as needed). Now the main display (the left of two screens) is working as usual while the right one is limited to an 800x600 resolution. I've already tried several approaches to manually configure this one as intended but so far without success. nvidia-settings won't allow me to set any resolution other than Auto and is also weirdly showing the second display as DFP-3 whereas I think it used to be DFP-1 (following DFP-0 which is still active). A hardware issue can be eliminated as everything is smooth using an Ubuntu bootable CD which uses nouveau by default.
    Here's the Xorg.0.log with a clean configuration (i. e. no /etc/X11/xorg.conf.d/10-monitor.conf)
    [ 2.266]
    X.Org X Server 1.13.2
    Release Date: 2013-01-24
    [ 2.266] X Protocol Version 11, Revision 0
    [ 2.266] Build Operating System: Linux 3.7.4-1-ARCH x86_64
    [ 2.266] Current Operating System: Linux einstein 3.7.6-1-ARCH #1 SMP PREEMPT Mon Feb 4 09:15:13 CET 2013 x86_64
    [ 2.266] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=edf8551b-5b2d-4942-af17-b2ebb09a6cb6 ro quiet init=/usr/lib/systemd/systemd
    [ 2.266] Build Date: 25 January 2013 09:33:50AM
    [ 2.266]
    [ 2.266] Current version of pixman: 0.28.2
    [ 2.266] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2.266] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2.266] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 9 11:29:34 2013
    [ 2.268] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2.269] (==) No Layout section. Using the first Screen section.
    [ 2.269] (==) No screen section available. Using defaults.
    [ 2.269] (**) |-->Screen "Default Screen Section" (0)
    [ 2.269] (**) | |-->Monitor "<default monitor>"
    [ 2.269] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 2.269] (==) Automatically adding devices
    [ 2.269] (==) Automatically enabling devices
    [ 2.269] (==) Automatically adding GPU devices
    [ 2.270] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2.270] Entry deleted from font path.
    [ 2.271] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2.271] Entry deleted from font path.
    [ 2.271] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2.271] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2.271] Entry deleted from font path.
    [ 2.271] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2.271] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 2.271] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2.271] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2.271] (II) Loader magic: 0x7fcc40
    [ 2.271] (II) Module ABI versions:
    [ 2.271] X.Org ANSI C Emulation: 0.4
    [ 2.271] X.Org Video Driver: 13.1
    [ 2.271] X.Org XInput driver : 18.0
    [ 2.271] X.Org Server Extension : 7.0
    [ 2.272] (--) PCI:*(0:1:0:0) 10de:0e22:19da:2166 rev 161, Mem @ 0xf4000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 2.272] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2.272] Initializing built-in extension Generic Event Extension
    [ 2.272] Initializing built-in extension SHAPE
    [ 2.272] Initializing built-in extension MIT-SHM
    [ 2.272] Initializing built-in extension XInputExtension
    [ 2.272] Initializing built-in extension XTEST
    [ 2.272] Initializing built-in extension BIG-REQUESTS
    [ 2.272] Initializing built-in extension SYNC
    [ 2.272] Initializing built-in extension XKEYBOARD
    [ 2.272] Initializing built-in extension XC-MISC
    [ 2.272] Initializing built-in extension SECURITY
    [ 2.272] Initializing built-in extension XINERAMA
    [ 2.272] Initializing built-in extension XFIXES
    [ 2.272] Initializing built-in extension RENDER
    [ 2.272] Initializing built-in extension RANDR
    [ 2.272] Initializing built-in extension COMPOSITE
    [ 2.272] Initializing built-in extension DAMAGE
    [ 2.272] Initializing built-in extension MIT-SCREEN-SAVER
    [ 2.272] Initializing built-in extension DOUBLE-BUFFER
    [ 2.272] Initializing built-in extension RECORD
    [ 2.272] Initializing built-in extension DPMS
    [ 2.272] Initializing built-in extension X-Resource
    [ 2.272] Initializing built-in extension XVideo
    [ 2.272] Initializing built-in extension XVideo-MotionCompensation
    [ 2.272] Initializing built-in extension XFree86-VidModeExtension
    [ 2.272] Initializing built-in extension XFree86-DGA
    [ 2.272] Initializing built-in extension XFree86-DRI
    [ 2.272] Initializing built-in extension DRI2
    [ 2.272] (II) LoadModule: "glx"
    [ 2.273] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2.346] (II) Module glx: vendor="NVIDIA Corporation"
    [ 2.346] compiled for 4.0.2, module version = 1.0.0
    [ 2.346] Module class: X.Org Server Extension
    [ 2.346] (II) NVIDIA GLX Module 313.18 Wed Jan 9 15:34:35 PST 2013
    [ 2.346] Loading extension GLX
    [ 2.346] (==) Matched nouveau as autoconfigured driver 0
    [ 2.346] (==) Matched nvidia as autoconfigured driver 1
    [ 2.346] (==) Matched nv as autoconfigured driver 2
    [ 2.346] (==) Matched vesa as autoconfigured driver 3
    [ 2.346] (==) Matched modesetting as autoconfigured driver 4
    [ 2.346] (==) Matched fbdev as autoconfigured driver 5
    [ 2.346] (==) Assigned the driver to the xf86ConfigLayout
    [ 2.346] (II) LoadModule: "nouveau"
    [ 2.347] (WW) Warning, couldn't open module nouveau
    [ 2.347] (II) UnloadModule: "nouveau"
    [ 2.347] (II) Unloading nouveau
    [ 2.347] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [ 2.347] (II) LoadModule: "nvidia"
    [ 2.347] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 2.355] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 2.355] compiled for 4.0.2, module version = 1.0.0
    [ 2.355] Module class: X.Org Video Driver
    [ 2.356] (II) LoadModule: "nv"
    [ 2.356] (WW) Warning, couldn't open module nv
    [ 2.356] (II) UnloadModule: "nv"
    [ 2.356] (II) Unloading nv
    [ 2.356] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 2.356] (II) LoadModule: "vesa"
    [ 2.356] (WW) Warning, couldn't open module vesa
    [ 2.356] (II) UnloadModule: "vesa"
    [ 2.356] (II) Unloading vesa
    [ 2.356] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 2.356] (II) LoadModule: "modesetting"
    [ 2.357] (WW) Warning, couldn't open module modesetting
    [ 2.357] (II) UnloadModule: "modesetting"
    [ 2.357] (II) Unloading modesetting
    [ 2.357] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 2.357] (II) LoadModule: "fbdev"
    [ 2.357] (WW) Warning, couldn't open module fbdev
    [ 2.357] (II) UnloadModule: "fbdev"
    [ 2.357] (II) Unloading fbdev
    [ 2.357] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 2.357] (II) NVIDIA dlloader X Driver 313.18 Wed Jan 9 15:15:26 PST 2013
    [ 2.357] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 2.357] (++) using VT number 1
    [ 2.358] (II) Loading sub module "wfb"
    [ 2.358] (II) LoadModule: "wfb"
    [ 2.358] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 2.359] (II) Module wfb: vendor="X.Org Foundation"
    [ 2.359] compiled for 1.13.2, module version = 1.0.0
    [ 2.359] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2.359] (II) Loading sub module "ramdac"
    [ 2.359] (II) LoadModule: "ramdac"
    [ 2.359] (II) Module "ramdac" already built-in
    [ 2.360] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 2.360] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 2.360] (==) NVIDIA(0): RGB weight 888
    [ 2.360] (==) NVIDIA(0): Default visual is TrueColor
    [ 2.360] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 2.360] (**) NVIDIA(0): Enabling 2D acceleration
    [ 3.170] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
    [ 3.170] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 3.229] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
    [ 3.229] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
    [ 3.229] (--) NVIDIA(GPU-0):
    [ 3.229] (--) NVIDIA(GPU-0): Raw EDID bytes:
    [ 3.229] (--) NVIDIA(GPU-0):
    [ 3.229] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
    [ 3.229] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
    [ 3.229] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
    [ 3.229] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
    [ 3.229] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
    [ 3.229] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
    [ 3.229] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
    [ 3.229] (--) NVIDIA(GPU-0):
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0):
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.229] (--) NVIDIA(GPU-0):
    [ 3.230] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 460 (GF104) at PCI:1:0:0 (GPU-0)
    [ 3.230] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 3.230] (--) NVIDIA(0): VideoBIOS: 70.04.13.00.a3
    [ 3.230] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 3.232] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 460 at PCI:1:0:0
    [ 3.232] (--) NVIDIA(0): CRT-0
    [ 3.232] (--) NVIDIA(0): CRT-1
    [ 3.232] (--) NVIDIA(0): Idek Iiyama PLE2607WS (DFP-0) (connected)
    [ 3.232] (--) NVIDIA(0): DFP-1
    [ 3.232] (--) NVIDIA(0): DFP-2
    [ 3.232] (--) NVIDIA(0): DFP-3 (connected)
    [ 3.232] (--) NVIDIA(0): DFP-4
    [ 3.232] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): Idek Iiyama PLE2607WS (DFP-0): 330.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): Idek Iiyama PLE2607WS (DFP-0): Internal Dual Link TMDS
    [ 3.232] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
    [ 3.232] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
    [ 3.232] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): DFP-3: Internal Dual Link TMDS
    [ 3.232] (--) NVIDIA(0): DFP-4: 480.0 MHz maximum pixel clock
    [ 3.232] (--) NVIDIA(0): DFP-4: Internal DisplayPort
    [ 3.232] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 3.232] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
    [ 3.232] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 3.233] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 3.233] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
    [ 3.233] (**) NVIDIA(0): all display devices.)
    [ 3.233] (==) NVIDIA(0):
    [ 3.233] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 3.233] (==) NVIDIA(0): will be used as the requested mode.
    [ 3.233] (==) NVIDIA(0):
    [ 3.233] (II) NVIDIA(0): Validated MetaModes:
    [ 3.233] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-3:nvidia-auto-select"
    [ 3.233] (II) NVIDIA(0): Virtual screen size determined to be 2720 x 1200
    [ 3.261] (--) NVIDIA(0): DPI set to (88, 89); computed from "UseEdidDpi" X config
    [ 3.261] (--) NVIDIA(0): option
    [ 3.261] (--) Depth 24 pixmap format is 32 bpp
    [ 3.261] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 3.261] (II) NVIDIA: access.
    [ 3.265] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 3.265] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 3.265] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 3.265] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 3.265] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 3.265] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 3.265] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 3.265] (II) NVIDIA(0): Config Options in the README.
    [ 3.267] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-3:nvidia-auto-select"
    [ 3.357] Loading extension NV-GLX
    [ 3.452] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 3.452] (==) NVIDIA(0): Backing store disabled
    [ 3.452] (==) NVIDIA(0): Silken mouse enabled
    [ 3.453] (==) NVIDIA(0): DPMS enabled
    [ 3.453] Loading extension NV-CONTROL
    [ 3.453] Loading extension XINERAMA
    [ 3.453] (II) Loading sub module "dri2"
    [ 3.453] (II) LoadModule: "dri2"
    [ 3.453] (II) Module "dri2" already built-in
    [ 3.453] (II) NVIDIA(0): [DRI2] Setup complete
    [ 3.453] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 3.453] (--) RandR disabled
    [ 3.456] (II) Initializing extension GLX
    [ 3.502] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 3.503] (**) Power Button: Applying InputClass "system-keyboard"
    [ 3.503] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 3.503] (II) LoadModule: "evdev"
    [ 3.503] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 3.505] (II) Module evdev: vendor="X.Org Foundation"
    [ 3.505] compiled for 1.13.0, module version = 2.7.3
    [ 3.505] Module class: X.Org XInput Driver
    [ 3.505] ABI class: X.Org XInput driver, version 18.0
    [ 3.505] (II) Using input driver 'evdev' for 'Power Button'
    [ 3.505] (**) Power Button: always reports core events
    [ 3.505] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 3.505] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 3.505] (--) evdev: Power Button: Found keys
    [ 3.505] (II) evdev: Power Button: Configuring as keyboard
    [ 3.505] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
    [ 3.505] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 3.505] (**) Option "xkb_rules" "evdev"
    [ 3.505] (**) Option "xkb_model" "pc105"
    [ 3.505] (**) Option "xkb_layout" "de"
    [ 3.505] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 3.529] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 3.529] (**) Power Button: Applying InputClass "system-keyboard"
    [ 3.529] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 3.529] (II) Using input driver 'evdev' for 'Power Button'
    [ 3.529] (**) Power Button: always reports core events
    [ 3.529] (**) evdev: Power Button: Device: "/dev/input/event0"
    [ 3.529] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 3.529] (--) evdev: Power Button: Found keys
    [ 3.529] (II) evdev: Power Button: Configuring as keyboard
    [ 3.529] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
    [ 3.529] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 3.529] (**) Option "xkb_rules" "evdev"
    [ 3.529] (**) Option "xkb_model" "pc105"
    [ 3.529] (**) Option "xkb_layout" "de"
    [ 3.529] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 3.530] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
    [ 3.530] (II) No input driver specified, ignoring this device.
    [ 3.530] (II) This device may have been added with another device file.
    [ 3.530] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
    [ 3.530] (II) No input driver specified, ignoring this device.
    [ 3.530] (II) This device may have been added with another device file.
    [ 3.531] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
    [ 3.531] (II) No input driver specified, ignoring this device.
    [ 3.531] (II) This device may have been added with another device file.
    [ 3.531] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
    [ 3.531] (II) No input driver specified, ignoring this device.
    [ 3.531] (II) This device may have been added with another device file.
    [ 3.531] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event3)
    [ 3.531] (II) No input driver specified, ignoring this device.
    [ 3.531] (II) This device may have been added with another device file.
    [ 3.531] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event4)
    [ 3.531] (II) No input driver specified, ignoring this device.
    [ 3.531] (II) This device may have been added with another device file.
    [ 3.532] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event5)
    [ 3.532] (II) No input driver specified, ignoring this device.
    [ 3.532] (II) This device may have been added with another device file.
    [ 3.532] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event7)
    [ 3.532] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 3.532] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 3.532] (**) Logitech USB Receiver: always reports core events
    [ 3.532] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event7"
    [ 3.532] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc51a
    [ 3.532] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
    [ 3.532] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 3.532] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 3.532] (--) evdev: Logitech USB Receiver: Found x and y relative axes
    [ 3.532] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 3.532] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 3.532] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 3.532] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 3.532] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input7/event7"
    [ 3.532] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
    [ 3.532] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 3.533] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 3.533] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 3.533] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 3.533] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 3.533] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 3.533] (II) No input driver specified, ignoring this device.
    [ 3.533] (II) This device may have been added with another device file.
    [ 3.533] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8)
    [ 3.533] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
    [ 3.533] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 3.533] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 3.533] (**) Logitech USB Receiver: always reports core events
    [ 3.533] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event8"
    [ 3.534] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc51a
    [ 3.534] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
    [ 3.534] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 3.534] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 3.534] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
    [ 3.534] (--) evdev: Logitech USB Receiver: Found absolute axes
    [ 3.534] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
    [ 3.534] (--) evdev: Logitech USB Receiver: Found keys
    [ 3.534] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 3.534] (II) evdev: Logitech USB Receiver: Configuring as keyboard
    [ 3.534] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 3.534] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 3.534] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 3.534] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/input/input8/event8"
    [ 3.534] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
    [ 3.534] (**) Option "xkb_rules" "evdev"
    [ 3.534] (**) Option "xkb_model" "pc105"
    [ 3.534] (**) Option "xkb_layout" "de"
    [ 3.534] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 3.534] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 3.534] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
    [ 3.534] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 3.534] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 3.534] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 3.534] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 3.535] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Pro Keyboard (/dev/input/event9)
    [ 3.535] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "system-keyboard"
    [ 3.535] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 3.535] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Digital Media Pro Keyboard'
    [ 3.535] (**) Microsoft Microsoft® Digital Media Pro Keyboard: always reports core events
    [ 3.535] (**) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Device: "/dev/input/event9"
    [ 3.535] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Vendor 0x45e Product 0xb0
    [ 3.535] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found keys
    [ 3.535] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Configuring as keyboard
    [ 3.535] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input9/event9"
    [ 3.535] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media Pro Keyboard" (type: KEYBOARD, id 10)
    [ 3.535] (**) Option "xkb_rules" "evdev"
    [ 3.535] (**) Option "xkb_model" "pc105"
    [ 3.535] (**) Option "xkb_layout" "de"
    [ 3.535] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 3.536] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Pro Keyboard (/dev/input/event10)
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "system-keyboard"
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 3.536] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Digital Media Pro Keyboard'
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: always reports core events
    [ 3.536] (**) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Device: "/dev/input/event10"
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Vendor 0x45e Product 0xb0
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found 1 mouse buttons
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found scroll wheel(s)
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found relative axes
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found absolute axes
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found absolute multitouch axes
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found x and y absolute axes
    [ 3.536] (--) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Found keys
    [ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Forcing relative x/y axes to exist.
    [ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Configuring as mouse
    [ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Configuring as keyboard
    [ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: Adding scrollwheel support
    [ 3.536] (**) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: YAxisMapping: buttons 4 and 5
    [ 3.536] (**) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 3.536] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input10/event10"
    [ 3.536] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media Pro Keyboard" (type: KEYBOARD, id 11)
    [ 3.536] (**) Option "xkb_rules" "evdev"
    [ 3.536] (**) Option "xkb_model" "pc105"
    [ 3.536] (**) Option "xkb_layout" "de"
    [ 3.536] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 3.536] (II) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: initialized for relative axes.
    [ 3.536] (WW) evdev: Microsoft Microsoft® Digital Media Pro Keyboard: ignoring absolute axes.
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: (accel) keeping acceleration scheme 1
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: (accel) acceleration profile 0
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: (accel) acceleration factor: 2.000
    [ 3.536] (**) Microsoft Microsoft® Digital Media Pro Keyboard: (accel) acceleration threshold: 4
    [ 3.537] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Pro Keyboard (/dev/input/js0)
    [ 3.537] (**) Microsoft Microsoft® Digital Media Pro Keyboard: Applying InputClass "system-keyboard"
    [ 3.537] (II) No input driver specified, ignoring this device.
    [ 3.537] (II) This device may have been added with another device file.
    [ 3.537] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event6)
    [ 3.537] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
    [ 3.537] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 3.537] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
    [ 3.537] (**) Eee PC WMI hotkeys: always reports core events
    [ 3.537] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event6"
    [ 3.537] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
    [ 3.537] (--) evdev: Eee PC WMI hotkeys: Found keys
    [ 3.537] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
    [ 3.537] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input6/event6"
    [ 3.537] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
    [ 3.537] (**) Option "xkb_rules" "evdev"
    [ 3.537] (**) Option "xkb_model" "pc105"
    [ 3.537] (**) Option "xkb_layout" "de"
    [ 3.537] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 3.538] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 3.538] (II) No input driver specified, ignoring this device.
    [ 3.538] (II) This device may have been added with another device file.
    [ 3.542] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event4)
    [ 3.542] (II) No input driver specified, ignoring this device.
    [ 3.542] (II) This device may have been added with another device file.
    [ 3.542] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
    [ 3.542] (II) No input driver specified, ignoring this device.
    [ 3.542] (II) This device may have been added with another device file.
    [ 3.543] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event3)
    [ 3.543] (II) No input driver specified, ignoring this device.
    [ 3.543] (II) This device may have been added with another device file.
    [ 3.543] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event5)
    [ 3.543] (II) No input driver specified, ignoring this device.
    [ 3.543] (II) This device may have been added with another device file.
    [ 3.543] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
    [ 3.543] (II) No input driver specified, ignoring this device.
    [ 3.543] (II) This device may have been added with another device file.
    [ 3.543] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
    [ 3.543] (II) No input driver specified, ignoring this device.
    [ 3.543] (II) This device may have been added with another device file.
    [ 3.543] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
    [ 3.543] (II) No input driver specified, ignoring this device.
    [ 3.543] (II) This device may have been added with another device file.
    [ 3.620] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
    [ 3.620] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 3.620] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 3.620] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
    [ 3.620] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 3.679] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
    [ 3.679] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
    [ 3.679] (--) NVIDIA(GPU-0):
    [ 3.679] (--) NVIDIA(GPU-0): Raw EDID bytes:
    [ 3.679] (--) NVIDIA(GPU-0):
    [ 3.679] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
    [ 3.679] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
    [ 3.679] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
    [ 3.679] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
    [ 3.679] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
    [ 3.679] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
    [ 3.679] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
    [ 3.679] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
    [ 3.680] (--) NVIDIA(GPU-0):
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0):
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 3.680] (--) NVIDIA(GPU-0):
    [ 3.680] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 3.680] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
    [ 3.680] (**) NVIDIA(0): all display devices.)
    [ 4.259] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
    [ 4.259] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 4.259] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4.259] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
    [ 4.259] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 4.319] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
    [ 4.319] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
    [ 4.319] (--) NVIDIA(GPU-0):
    [ 4.319] (--) NVIDIA(GPU-0): Raw EDID bytes:
    [ 4.319] (--) NVIDIA(GPU-0):
    [ 4.319] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
    [ 4.319] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
    [ 4.319] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
    [ 4.319] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
    [ 4.319] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
    [ 4.319] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
    [ 4.319] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
    [ 4.319] (--) NVIDIA(GPU-0):
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0):
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 4.319] (--) NVIDIA(GPU-0):
    [ 4.319] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 4.319] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
    [ 4.319] (**) NVIDIA(0): all display devices.)
    [ 16.599] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
    [ 16.599] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 16.599] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 16.599] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
    [ 16.599] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 16.659] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
    [ 16.659] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
    [ 16.659] (--) NVIDIA(GPU-0):
    [ 16.659] (--) NVIDIA(GPU-0): Raw EDID bytes:
    [ 16.659] (--) NVIDIA(GPU-0):
    [ 16.659] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
    [ 16.659] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
    [ 16.659] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
    [ 16.659] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
    [ 16.659] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
    [ 16.659] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
    [ 16.659] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
    [ 16.659] (--) NVIDIA(GPU-0):
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0):
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 16.659] (--) NVIDIA(GPU-0):
    [ 16.659] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 16.659] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
    [ 16.659] (**) NVIDIA(0): all display devices.)
    [ 17.393] (II) NVIDIA(GPU-0): Display (Idek Iiyama PLE2607WS (DFP-0)) does not support
    [ 17.393] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
    [ 17.393] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 17.393] (**) NVIDIA(0): device Idek Iiyama PLE2607WS (DFP-0) (Using EDID
    [ 17.393] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 17.453] (WW) NVIDIA(GPU-0): The EDID read for display device DFP-3 is invalid:
    [ 17.453] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
    [ 17.453] (--) NVIDIA(GPU-0):
    [ 17.453] (--) NVIDIA(GPU-0): Raw EDID bytes:
    [ 17.453] (--) NVIDIA(GPU-0):
    [ 17.453] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff 26 cd 08 56 c0 c4 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 1d 13 01 03 81 37 22 78 2a 7b 65 a5 55 48 99 26
    [ 17.453] (--) NVIDIA(GPU-0): 12 50 54 bd ef 80 71 4f 81 80 81 8f 95 00 95 0f
    [ 17.453] (--) NVIDIA(GPU-0): a9 40 b3 00 01 01 28 3c 80 a0 70 b0 23 40 30 20
    [ 17.453] (--) NVIDIA(GPU-0): 36 00 26 58 21 00 00 1a 1a 36 80 a0 70 38 1f 40
    [ 17.453] (--) NVIDIA(GPU-0): 50 20 85 04 26 58 21 00 00 1a 00 00 00 fd 00 37
    [ 17.453] (--) NVIDIA(GPU-0): 4c 1d 51 11 00 0a 20 20 20 20 20 20 00 00 00 fc
    [ 17.453] (--) NVIDIA(GPU-0): 00 50 4c 45 32 36 30 37 57 53 0a 20 20 20 00 1e
    [ 17.453] (--) NVIDIA(GPU-0):
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0):
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 17.453] (--) NVIDIA(GPU-0):
    [ 17.453] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 17.453] (**) NVIDIA(0): device DFP-3 (Using EDID frequencies has been enabled on
    [ 17.453] (**) NVIDIA(0): all display devices.)
    As you can see, the EDID information cannot be obtained from the second display. Since I haven't found any indication of this being a bug in the latest nVidia driver, I wanted to ask whether you have come across any hints or explanations.
    For the time being, I can live with it but I'm actually considering moving to nouveau instead now.
    Thanks for your time. Cheers
    Smoerrebroed
    Last edited by Smoerrebroed (2013-05-04 11:34:32)

    Alright, though it still bothers me that for some reason the nvidia driver no longer correctly reads and processes EDID information on all connectors, supplying DFP-0's EDID to DFP-3 via the "CustomEDID" option fixed all woes. 1920x1200 is now again detected as default, TwinView is enabled and so on ... even without a sophisticated 10-monitor.conf:
    Section "Device"
    Identifier "GeForce GTX 460"
    Driver "nvidia"
    Option "CustomEDID" "DFP-3:/etc/X11/xorg.conf.d/edid.bin"
    EndSection
    Everything else remains at default and works. Perhaps this post will also help others in dealing with nvidia issues.
    One thing this has taught me though is: As much inclined as I am towards open source software, the nouveau driver is really still a long way off the performance of the proprietary nvidia module. If you want/need to work seriously in 3D, there's no alternative.
    Cheers
    Smoerrebroed
    Last edited by Smoerrebroed (2013-05-31 19:36:45)

  • Tty display problems with nvidia and uvesafb

    I'm trying to get my console to display correctly at 1080p; trying to do so through GRUB was always an absolute nightmare.
    The console displays fine with nouveau, but nouveau causes the infamous pink line bug, which is simply too irritating to ignore; nouveau is not an option.
    In the past, my console has run at low res and incorrect scale with nvidia, but I've ignored the problem since I prefer to use a virtual terminal in X.
    Now, if possible, I need to use the actual console for the purposes of module development.
    I installed v86d and uvesafb and configured the console for 1920x1080 and 32 bit depth.
    The console is displaying with the correct resolution now, but is surrounded by a black border, making the font distorted and extremely difficult to read.
    How can I get my console to scale correctly to fullscreen? Any ideas at all. I found nothing in the forums or wiki, and I'm out.
    I'm fairly certain there are no vga or video settings in GRUB that are interfering.

    Output of "pacman -Qi nvidia"
    Name : nvidia
    Version : 343.36-2
    Description : NVIDIA drivers for linux
    Architecture : x86_64
    URL : http://www.nvidia.com/
    Licenses : custom
    Groups : None
    Provides : None
    Depends On : linux>=3.17 linux<3.18 nvidia-libgl nvidia-utils=343.36
    Optional Deps : None
    Required By : None
    Optional For : None
    Conflicts With : None
    Replaces : None
    Installed Size : 5.30 MiB
    Packager : Felix Yan <[email protected]>
    Build Date : Thu 11 Dec 2014 08:32:19 AM CST
    Install Date : Fri 12 Dec 2014 12:10:32 AM CST
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature
    Output "cat /boot/grub/grub.cfg"
    # DO NOT EDIT THIS FILE
    # It is automatically generated by grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    ### BEGIN /etc/grub.d/00_header ###
    insmod part_gpt
    insmod part_msdos
    if [ -s $prefix/grubenv ]; then
    load_env
    fi
    if [ "${next_entry}" ] ; then
    set default="${next_entry}"
    set next_entry=
    save_env next_entry
    set boot_once=true
    else
    set default="0"
    fi
    if [ x"${feature_menuentry_id}" = xy ]; then
    menuentry_id_option="--id"
    else
    menuentry_id_option=""
    fi
    export menuentry_id_option
    if [ "${prev_saved_entry}" ]; then
    set saved_entry="${prev_saved_entry}"
    save_env saved_entry
    set prev_saved_entry=
    save_env prev_saved_entry
    set boot_once=true
    fi
    function savedefault {
    if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
    fi
    function load_video {
    if [ x$feature_all_video_module = xy ]; then
    insmod all_video
    else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
    fi
    set menu_color_normal=green/black
    set menu_color_highlight=black/green
    if [ x$feature_default_font_path = xy ] ; then
    font=unicode
    else
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    font="/usr/share/grub/unicode.pf2"
    fi
    if loadfont $font ; then
    set gfxmode=auto
    load_video
    insmod gfxterm
    set locale_dir=$prefix/locale
    set lang=en_US
    insmod gettext
    fi
    terminal_input console
    terminal_output gfxterm
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    insmod png
    background_image -m stretch /boot/grub/archgrub.png
    if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=5
    # Fallback normal timeout code in case the timeout_style feature is
    # unavailable.
    else
    set timeout=5
    fi
    ### END /etc/grub.d/00_header ###
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-337acc84-0300-43b1-b426-79391d39e898' {
    load_video
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    echo 'Loading Linux linux ...'
    linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux.img
    submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-337acc84-0300-43b1-b426-79391d39e898' {
    menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-337acc84-0300-43b1-b426-79391d39e898' {
    load_video
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    echo 'Loading Linux linux ...'
    linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux.img
    menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-337acc84-0300-43b1-b426-79391d39e898' {
    load_video
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    echo 'Loading Linux linux ...'
    linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux-fallback.img
    ### END /etc/grub.d/10_linux ###
    ### BEGIN /etc/grub.d/20_linux_xen ###
    ### END /etc/grub.d/20_linux_xen ###
    ### BEGIN /etc/grub.d/30_os-prober ###
    ### END /etc/grub.d/30_os-prober ###
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries. Simply type the
    # menu entries you want to add after this comment. Be careful not to change
    # the 'exec tail' line above.
    ### END /etc/grub.d/40_custom ###
    ### BEGIN /etc/grub.d/41_custom ###
    if [ -f ${config_directory}/custom.cfg ]; then
    source ${config_directory}/custom.cfg
    elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
    source $prefix/custom.cfg;
    fi
    ### END /etc/grub.d/41_custom ###
    ### BEGIN /etc/grub.d/60_memtest86+ ###
    ### END /etc/grub.d/60_memtest86+ ###
    Output "cat /usr/lib/modprobe.d/uvesafb.conf"
    Video mode is set as "1920x1080-32".
    # This file sets the parameters for uvesafb module.
    # The following format should be used:
    # options uvesafb mode=<xres>x<yres>[-<bpp>][@<refresh>] scroll=<ywrap|ypan|redraw> ...
    # For more details see:
    # http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=Documentation/fb/uvesafb.txt
    options uvesafb mode_option=1920x1080-32 scroll=ywrap
    This file is mirrored in /etc/modprobe.d/uvesafb.conf.
    Running "diff /usr/lib/modprobe.d/uvesafb.conf /etc/modprobe.d/uvesafb.conf" returns no output.
    Output of "cat /sys/class/graphics/fb0/virtual_size" is solely "1920,1080".
    ---edit---
    Output of "cat /etc/default/grub" in case it's helpful.
    GRUB_DEFAULT=0
    GRUB_TIMEOUT=5
    GRUB_DISTRIBUTOR="Arch"
    GRUB_CMDLINE_LINUX_DEFAULT="quiet"
    GRUB_CMDLINE_LINUX=""
    # Preload both GPT and MBR modules so that they are not missed
    GRUB_PRELOAD_MODULES="part_gpt part_msdos"
    # Uncomment to enable Hidden Menu, and optionally hide the timeout count
    #GRUB_HIDDEN_TIMEOUT=5
    #GRUB_HIDDEN_TIMEOUT_QUIET=true
    # Uncomment to use basic console
    GRUB_TERMINAL_INPUT=console
    # Uncomment to disable graphical terminal
    #GRUB_TERMINAL_OUTPUT=console
    # The resolution used on graphical terminal
    # note that you can use only modes which your graphic card supports via VBE
    # you can see them in real GRUB with the command `vbeinfo'
    GRUB_GFXMODE=auto
    # Uncomment to allow the kernel use the same resolution used by grub
    #GRUB_GFXPAYLOAD_LINUX=keep
    # Uncomment if you want GRUB to pass to the Linux kernel the old parameter
    # format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
    #GRUB_DISABLE_LINUX_UUID=true
    # Uncomment to disable generation of recovery mode menu entries
    GRUB_DISABLE_RECOVERY=true
    # Uncomment and set to the desired menu colors. Used by normal and wallpaper
    # modes only. Entries specified as foreground/background.
    GRUB_COLOR_NORMAL="green/black"
    GRUB_COLOR_HIGHLIGHT="black/green"
    # Uncomment one of them for the gfx desired, a image background or a gfxtheme
    GRUB_BACKGROUND="/boot/grub/archgrub.png"
    #GRUB_THEME="/path/to/gfxtheme"
    # Uncomment to get a beep at GRUB start
    #GRUB_INIT_TUNE="480 440 1"
    #GRUB_SAVEDEFAULT="true"
    Also, it might help to describe the behaviour more specifically / more in depth...
    The rendered part of the console occupies the same space as the GRUB boot menu.
    I installed and configured virtualbox a few weeks previously.
    I ran "sudo depmod -a" as the wiki / forums indicated it could remedy problems with virtual machines failing to start.
    It did fix the virtualbox problem; after reboot, suddenly lightdm *also* initally occupied the same window space as grub.
    That was new behaviour. When I logged in to xmonad, the desktop displayed similarly to GRUB.
    I hadn't tried fixing it; logging in with root followed by "ps -e | grep X" and "kill -9 <Xpid>" caused X as a whole to start behaving and scaling normally.
    I haven't rebooted until attempting to rectify the issue with my console.
    The oddity with scaling in lightdm and xmonad still shows up after reboot and is still reparable by killing X.
    Killing X doesn't - obviously - have any effect on console scale.
    ---/edit---
    d(-_-)
    Last edited by seppukuzushi (2014-12-31 14:01:23)

  • Fix For nvlddmkm.sys Black Screen Of Death

    I think I finally found a fix for the Black Screen of Death from the bug with nviddmkm.sys and all the latest Nvidia Drivers.  This works on my IQ816 with NVIDIA 9600GS, it should work for most TouchSmarts that are having the random black screens.
    There is a free utility called RivaTuner that works with Nvidia cards.  You can get it here:
    http://downloads.guru3d.com/download.php?det=163#download
    Do the following:
    Install Rivatuner.
    Click okay when it gives you the box about not being a supported card or whatever.
    On the screen that comes up, click the tiny icon next to Customize, it's under Driver Settings in the middle of the screen.  Then click on the icon for the card.  It looks like a videocard and should be the first icon on the left.
    At the core clock screen, click the checkbox at the top to enable.  Click Detect Now when it asks for it.  Set the dropdown on the right to 3D.  Then set the core clock slider to 550 or as close as you can get to it.  I had 551.
    You can either check off start with Windows or wait and see if it's okay and then come back to this screen and check Start with Windows.  That will make sure the setting will stay all the time.  Otherwise it just reverts back to the original settings.
    Click okay.  And that should be it.
    If you need help, watch the video tutorial on it here:
    http://www.youtube.com/watch?v=NU8_EMjSUf4
    So far, since I did this, no random black screens of death.  So this may be it.
    This question was solved.
    View Solution.

    gilandme wrote:
    I might have the same issue, the problem is that my HP IQ804 desktop screen is in total darkness, no image, what can I do?
    Did you try the steps posted above? if so in what order.

  • Nvlddmkm.sys

    Hello all this is my first posting:
    I have a HP m8200n computer using Windows Vista, recently i tried to upgrade to the Microsofts SP2 update, then a power outtage happened, now the computer won't reboot entirely.
    I am getting a message for nvlddmkm.sys after a crash dump it restarts and i can never get back into the login screen for my username.
    Can someone please help me with this issue.
    I also cannot use safemode it just keeps restarting, can i modify the bios or something?
    any help is greatly appreciated.

       Unfortunately yes, you does your motherboard have a integrated graphics card if so you may be able to remove your graphics card and plug into the integrated. That may be able to get you to the OS aso that you can see what is causing the issue. If that works then you may be able to get a new graphis card and it may work.
    Brandon
    Best Buy Associate | Geek Squad Agent
    Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
    *Remember to mark your questions solved and click the star under the user's name to show your thanks!

  • HT203254 My MacBook Pro 15-inch with NVIDIA GeForce 8600M GT graphics processors just failed. Do you guys know if apple still fixes them?

    My MacBook Pro 15-inch with NVIDIA GeForce 8600M GT graphics processors just failed. Do you guys know if apple still fixes them?

    I tried last week. The best I could get was a discount on the repair, but the damage to my logic board by the GPU caused it to no longer boot. The program ended in December last year, but it has been extended in the past.
    If you have no other damage you might be able to get a flat rate tier 1 repair if you are in the USA.

  • HT203254 mac book pro 2008 with NVIDIA GeForce 8600M GT graphics processor...

    Hi,
    I just want to know if my mac book pro 2008 15" with NVIDIA GeForce 8600M GT graphics processor can be changed or repaired?My Mac doesnt have display on it...Sometimes it shows up...but after a while its black screen again..tnx

    It's a little late for me to jump into your discussion, I only read it when I posted an issue with the same model.
    Well, I hope you got it fixed soon enough in 2012, because as I learned in the past few days after purchasing that model and reading up on the issues, Apple stopped the care for this fault on December 7th or so in 2012.
    Seeing that people still get problems due to that graphics card, I should try to return the used one I just bought. I might run well now, but who knows how long.

Maybe you are looking for

  • IAC iViews - Save old status

    Hello experts, I have a problem with the ITS Service in portal side. if I hace two pages, page1 and page2, and this pages are IAC iViews for the same ITS service, and I perform this steps: 1) open page1 2) press a button in page1, that will show more

  • Adove TV Will Not Play Movies In Firefox and Safari

    For those at Adobe developing Flash, I wanted to post and let you know that I cannot view any Adobe TV videos in Firefox and Safari. I AM able to view videos in Google Chrome. I was able to view them a few months ago without any problems. The web pag

  • How to install windows 7 or Ubuntu??? Please help

    I tried to change the boot order, disable secure boot, enabled legacy boot order but nothing worked. I'm not able to boot from pen drive or DVD Drive. All these pen drives and  DVDs are booting in other systems but not mine. Please help me. Thanks &

  • Open report from Enterprise Repository

    Post Author: bbazian CA Forum: General When I try to open a report from my Enterprise repository that is on the CR server I can only see reports from A - E and the file name field is greyed out.  How can I see all the reports in the repository?  I do

  • Failed to initialize sqlcmd library with error number -2147467259

    I'm trying to get SQL Server to send an email.  The test email works fine; basically DBMail works properly.  The thing is, if a human runs it, everything is fine.  If I schedule it using Sql Server Agent Job, nothing works.  I think this has somethin