0x00007001 error during capture

Not really a question, just a note for any others looking for an answer.
While waiting for my build and capture task sequence to finish I thought I would do a bit of maintenance. Some of which (adding a network driver) required an update of the boot images.
Because the Boot.WIM had changed during the process I got an 0x0000701 error when it restarted into the capture phase.
So just keep that in mind if your working in SCCM while doing any multi-stage builds or captures:

Hi,
Thank you for sharing your experience to help other community members facing similar problems.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Error during capturing of Excise Invoice during Migo

Dear All,
When I trying to capture the Excise Invoice during Migo , the movement I enter the vendor's Excise Invoice ,system gives me the error , *****excise no dated **** does not exist for this *** vendor for reference.
Please help , where I am lacking.
Quick Reply would be appreatiated and rewardable.
Thanks
Edited by: Chhabra Nitin on Jul 4, 2009 9:07 PM

Hello Nitin,
In your MIGO - Header Excise details tab, make sure that you have selected capture excise invoice. Now it is 'Refer excise invoice' and hence this message comes.
'Refer excise invoice 'is used when you have already captured an excise invoice and doing a goods inward referring the same invoice captured before. (Multiple GR against single EI)
Also to capture the excise invoice in MIGO, make sure that the 'capture EI at MIGO' is ticked for the excise group in SPRO - LO Gen - Tax on goods movement - India - basic Settings - define Excise groups.
Regards

Error during Capture Excise invoice.

Hi All,
I am getting the below error message while capturing the Excise Invoice w.r.t. Material Document for which Part-1 entries are done in MIGO.
" Document 5000012864 does not contain any selectable items
Message no. M7064".
Pl. suggest.
Regards,
Varma

Hi All,
I am getting the below error message while capturing the Excise Invoice w.r.t. Material Document for which Part-1 entries are done in MIGO.
" Document 5000012864 does not contain any selectable items
Message no. M7064".
Pl. suggest.
Regards,
Varma
As you have done Part-1 entries are done in MIGO.By capturing excise invoice we only post part-1 entries .Therefore u can not capture the excise invoice/Part 1 entries multiple times for the same materila document.
As u have already captures the excise invoice u can only change/post/cancel the excise invoice.
Regards,
Satpal

Error during Excise invoice capture

Dear All,
I am getting an error during capture of excise invoice.The error message is "Excise invoice no xxx date xxxxof plant xxxx
does not exist.The message number is 4F175.i have searched forum google but have not got any solution for the error.
Can any one please help me in this matter
Regards
Manash Das

Hi,
From your question, I understood that you are referring an Excise Invoice number, so
Check
1. Whether the excise number and date is correct
2. Whether the excise number is available in Excise tables or not
Thanks
VJ

I repeatedly get "error during rendering/encoding of menus/slideshow" message. This process is the same on my iMac, MacBook and another iMac. I have been burning dvd's int he same way for the past 12 months using the exact same steps successfully.

I keep getting "error during rendering/encoding of menus/slideshows" message. I have been burning DVD's in exactly the same way for the past 12 months and mostly on my MacBook which is 3 years old. Obviously I'm using iDVD. I purchased an iMac about a year ago and moved to use this for dvd burning without problem. A few months ago (approximately) I started to experience problems with burning with the error message above. I tried everything including starting the whole process from scratch right down to capturing the movie clips from my video recorder into iMovie, then using them in iDVD. Still the same message came up. I lost count of how many times I repeated the process with different clips and variations and the same thing happened. This was also the case with my MacBook and my husband's iMac.
After taking both of mymac's tothe service centre, having new optical thingys put it and even a new hard drive on my iMac along with a new DVD burner the same thing happened. They told me it must be the process that I am using that is incorrect!
I took my 27" iMac to an apple shop and asked them to assist me while I use the same technique as I always had. The same message came up so they tried using my clips in one of their mac's. The same message. They tried it with different clips and the same message. The only way we could get theirs to work was with a magic DVD which did not produce what I needed and was limited with only one page.
I now cannot use any of my Mac's for the intended purpose that I bought them for - to produce good media for my work! It was suggested that I purchase some non Mac software to burn DVDs which defeats the object of having a mac with iDVD in my opinion. I have a book on iDVD which is very informative and have followed the process to the letter and checked all the trouble shooting and still no remedy. It was mentioned that an up-date may have caused the problem on all my macs.
I feel that this issue should be addressed by Apple as a matter of correctness.
I now find that on the net there are many posts in forums and such like with exactly the same (almost word for word) problems. Please Apple, keep/regain your good name and sort this out.
Jayne Connelly

Thanks Bengt W for your attention to this matter. So much appreciated. And thanks for putting me right on the aim of forums (new to this). Although, you may regret asking for more information. I've added everything I can below.
The process I used is as follows:
Import recorded clips of between 5 and 15minutes each from my video recorder into i
Edit the clips (remove unwanted start and endng)
Add title to front of clips
‘Share’ them to ‘movie’ (export using QuickTime)folder in .mov format individually
Open iDVD and ‘create new project’
Select ‘favourite’ theme that I have set up forall my work dvd’s (this has been used successfully many times and I’ve triedwithout using the favourite them).
Add 2 submenus for each group of clips
Select submenu - drag and drop between 3 – 6 clips in each of the twosubmenus
Change title colours on clips
Dragand drop image into drop zones where required
In‘map’ view I check for any yellow warnings before burning to disc
In an attempt to remedy the problems I’ve tried the following:
Try new DVD discs
Try different themes (favourites and standardones)
Change images in drop zones
Start whole process again even from importingfrom camera again
Two other completely different computers (iMacand MacBook) with iDVD
Go to apple shop and use their computers to doin iDVD
Try with one clip and no menu pages added
Use a clip that I already have that did notoriginate from my camera
Turn computer off and restart
New hard drive
New optical lense (thing)
New DVD burner
Saving to disc image rather than dvd disc
Other points:
I also have a ‘flip’ and ‘iPhone’ whereI’ve imported footage camera which, although limited, records and makes videoclips and burns them to DVD through iDVD without problem.
For example, I have just gone through steps 5 - 11 using some clips that were already imported from my iphone to iPhoto and dragged across. I used a theme that I've used before which has failed and added one sub menu page where the clip went. It burned to disc image successfully.
The startup disc, I believe will have no space issues asit’s a new hard drive with no use apart from this. That could have been an issue before (I didn’t check it) butnot now.
Other technical stuff that I don't understand but you may:
I have…… Mac OS X Version 10.6.7 with all updates onit. Processor 2.8 GHz Intel Corei7. Memory 4GB 1067 MHz DDR3.
iDVD version 7.1.1
HardwareOverview:
Model Name: iMac
Model Identifier: iMac11,1
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 4GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM111.0034.B02
SMC Version (system):            1.54f36
OPTIARCDVD RW AD-5680H:
Firmware Revision:     3AHB
Interconnect:    ATAPI
Burn Support:   Yes (AppleShipping Drive)
Cache:    2048KB
Reads DVD:    Yes
CD-Write: -R, -RW
DVD-Write:   -R, -R DL,-RW, +R, +R DL, +RW
Write Strategies: CD-TAO,CD-SAO, CD-Raw, DVD-DAO
Media: Toshow the available burn speeds, insert a disc and choose View > Refresh
If you can solve this you are better than the 'apple geeks' in the shop and the service technicians in the service centre (and of course me but that's no achievement).
Eagerly awaiting your reply.
Jayne

Get '500 Internal Server Error' during SIP INVITE - cause 44

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Get ‘500 Internal Server Error’ during SIP INVITE - cause 44
Have you ever seen anything like this before? It usually works, but intermittently, we see calls get rejected. It somehow seems related to high loads on the router. We reduced the occurrences by changing our code to throttle the number of SIP INVITEs we send, but this doesn’t scale well. Once it occurs, the only way to clean it up is to do a shut/no shut on the voice-port associated to SIP INVITE.
Any suggestions on how we can proceed to debug this issue?
BACKGROUND:
Cisco 2811 running (C2800NM-ADVENTERPRISEK9-M), Version 12.4(24)T3, RELEASE SOFTWARE (fc2)
NAME: "2811 chassis", DESCR: "2811 chassis" PID: CISCO2811
NAME: "9 Port FE Switch on Slot 0 SubSlot 1", DESCR: "9 Port FE Switch" PID: HWIC-D-9ESW
NAME: "WIC/VIC/HWIC 1 Power Daughter Card", DESCR: "9-Port HWIC-ESW Power Daughter Card" PID: ILPM-8
NAME: "Two port E1 voice interface daughtercard on Slot 0 SubSlot 2", DESCR: "Two port E1 voice interface daughtercard" PID: VWIC-2MFT-E1=
NAME: "Two port E1 voice interface daughtercard on Slot 0 SubSlot 3", DESCR: "Two port E1 voice interface daughtercard" PID: VWIC-2MFT-E1=
NAME: "PVDMII DSP SIMM with four DSPs on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
NAME: "High Density Voice2 Network module with on board two port interface on Slot 1", DESCR: "High Density Voice2 Network module with on board two port interface " PID: NM-HDV2-2T1/E1
NAME: "2nd generation two port EM voice interface daughtercard on Slot 1 SubSlot 0", DESCR: "2nd generation two port EM voice interface daughtercard" PID: VIC2-2E/M
NAME: "PVDMII DSP SIMM with four DSPs on Slot 1 SubSlot 2", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
NAME: "PVDMII DSP SIMM with four DSPs on Slot 1 SubSlot 3", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
NAME: "PVDMII DSP SIMM with four DSPs on Slot 1 SubSlot 4", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
NAME: "PVDMII DSP SIMM with four DSPs on Slot 1 SubSlot 5", DESCR: "PVDMII DSP SIMM with four DSPs" PID: PVDM2-64
WIRESHARK:
No.     Time        Source                Destination           Protocol Info
      2 0.057246    10.194.154.136        171.68.115.156        SIP      Status: 100 Trying
Frame 2 (471 bytes on wire, 471 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 100 Trying
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41a-100875-517454db
        From: <sip:[email protected]:5060>;tag=82f4a00-9c7344ab-13c4-45026-41a-4ea64c5a-41a
        To: <sip:[email protected]:5060>
        Date: Wed, 08 Sep 2010 20:47:49 GMT
        Call-ID: 80e4f50-9c7344ab-13c4-45026-41a-10aff3f4-41a
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow-Events: telephone-event
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Length: 0
No.     Time        Source                Destination           Protocol Info
      3 0.071428    10.194.154.136        171.68.115.156        SIP/SDP Status: 183 Session Progress, with session description
Frame 3 (1109 bytes on wire, 1109 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 183 Session Progress
   Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41a-100875-517454db
        From: <sip:[email protected]:5060>;tag=82f4a00-9c7344ab-13c4-45026-41a-4ea64c5a-41a
        To: <sip:[email protected]:5060>;tag=48645D8-1175
        Date: Wed, 08 Sep 2010 20:47:49 GMT
        Call-ID: 80e4f50-9c7344ab-13c4-45026-41a-10aff3f4-41a
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
        Allow-Events: telephone-event
        Remote-Party-ID: <sip:[email protected]>;party=called;screen=no;privacy=off
            [Expert Info (Note/Undecoded): Unrecognised SIP header (Remote-Party-ID)]
                [Message: Unrecognised SIP header (Remote-Party-ID)]
                [Severity level: Note]
                [Group: Undecoded]
        Contact: <sip:[email protected]:5060>
        Supported: sdp-anat
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Type: application/sdp
        Content-Disposition: session;handling=required
        Content-Length: 264
    Message Body
        Session Description Protocol
            Session Description Protocol Version (v): 0
            Owner/Creator, Session Id (o): CiscoSystemsSIP-GW-UserAgent 8759 6996 IN IP4 10.194.154.136
                Owner Username: CiscoSystemsSIP-GW-UserAgent
                Session ID: 8759
                Session Version: 6996
                Owner Network Type: IN
                Owner Address Type: IP4
                Owner Address: 10.194.154.136
            Session Name (s): SIP Call
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Time Description, active time (t): 0 0
                Session Start Time: 0
                Session Stop Time: 0
            Media Description, name and address (m): audio 18710 RTP/AVP 18 101
                Media Type: audio
                Media Port: 18710
                Media Protocol: RTP/AVP
                Media Format: ITU-T G.729
                Media Format: DynamicRTP-Type-101
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Media Attribute (a): rtpmap:18 G729/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 18
                MIME Type: G729
                Sample Rate: 8000
            Media Attribute (a): fmtp:18 annexb=no
                Media Attribute Fieldname: fmtp
                Media Format: 18 [G729]
                Media format specific parameters: annexb=no
            Media Attribute (a): rtpmap:101 telephone-event/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 101
               MIME Type: telephone-event
                Sample Rate: 8000
            Media Attribute (a): fmtp:101 0-16
                Media Attribute Fieldname: fmtp
                Media Format: 101 [telephone-event]
                Media format specific parameters: 0-16
No.     Time        Source                Destination           Protocol Info
      4 0.089917    10.194.154.136        171.68.115.156        SIP/SDP Status: 200 OK, with session description
Frame 4 (1116 bytes on wire, 1116 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 200 OK
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41a-100875-517454db
        From: <sip:[email protected]:5060>;tag=82f4a00-9c7344ab-13c4-45026-41a-4ea64c5a-41a
        To: <sip:[email protected]:5060>;tag=48645D8-1175
        Date: Wed, 08 Sep 2010 20:47:49 GMT
        Call-ID: 80e4f50-9c7344ab-13c4-45026-41a-10aff3f4-41a
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
        Allow-Events: telephone-event
        Remote-Party-ID: <sip:[email protected]>;party=called;screen=no;privacy=off
            [Expert Info (Note/Undecoded): Unrecognised SIP header (Remote-Party-ID)]
                [Message: Unrecognised SIP header (Remote-Party-ID)]
                [Severity level: Note]
                [Group: Undecoded]
        Contact: <sip:[email protected]:5060>
        Supported: replaces
        Supported: sdp-anat
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Type: application/sdp
        Content-Disposition: session;handling=required
        Content-Length: 264
    Message Body
        Session Description Protocol
            Session Description Protocol Version (v): 0
            Owner/Creator, Session Id (o): CiscoSystemsSIP-GW-UserAgent 8759 6996 IN IP4 10.194.154.136
                Owner Username: CiscoSystemsSIP-GW-UserAgent
                Session ID: 8759
                Session Version: 6996
                Owner Network Type: IN
                Owner Address Type: IP4
                Owner Address: 10.194.154.136
            Session Name (s): SIP Call
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Time Description, active time (t): 0 0
                Session Start Time: 0
                Session Stop Time: 0
            Media Description, name and address (m): audio 18710 RTP/AVP 18 101
                Media Type: audio
                Media Port: 18710
                Media Protocol: RTP/AVP
                Media Format: ITU-T G.729
                Media Format: DynamicRTP-Type-101
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
              Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Media Attribute (a): rtpmap:18 G729/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 18
                MIME Type: G729
                Sample Rate: 8000
            Media Attribute (a): fmtp:18 annexb=no
                Media Attribute Fieldname: fmtp
                Media Format: 18 [G729]
                Media format specific parameters: annexb=no
            Media Attribute (a): rtpmap:101 telephone-event/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 101
                MIME Type: telephone-event
                Sample Rate: 8000
            Media Attribute (a): fmtp:101 0-16
                Media Attribute Fieldname: fmtp
                Media Format: 101 [telephone-event]
                Media format specific parameters: 0-16
No.     Time        Source                Destination           Protocol Info
     7 1.661867    10.194.154.136        171.68.115.156        SIP      Status: 100 Trying
Frame 7 (469 bytes on wire, 469 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 100 Trying
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100eca-13593e22
        From: <sip:[email protected]:5060>;tag=82f4b98-9c7344ab-13c4-45026-41c-669825d-41c
        To: <sip:[email protected]:5060>
        Date: Wed, 08 Sep 2010 20:47:51 GMT
        Call-ID: 80e5138-9c7344ab-13c4-45026-41c-3f6bfc7-41c
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow-Events: telephone-event
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Length: 0
No.     Time        Source                Destination           Protocol Info
      8 1.676056    10.194.154.136        171.68.115.156        SIP/SDP Status: 183 Session Progress, with session description
Frame 8 (1107 bytes on wire, 1107 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 183 Session Progress
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100eca-13593e22
        From: <sip:[email protected]:5060>;tag=82f4b98-9c7344ab-13c4-45026-41c-669825d-41c
        To: <sip:[email protected]:5060>;tag=4864C1C-10F8
        Date: Wed, 08 Sep 2010 20:47:51 GMT
        Call-ID: 80e5138-9c7344ab-13c4-45026-41c-3f6bfc7-41c
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
        Allow-Events: telephone-event
        Remote-Party-ID: <sip:[email protected]>;party=called;screen=no;privacy=off
            [Expert Info (Note/Undecoded): Unrecognised SIP header (Remote-Party-ID)]
                [Message: Unrecognised SIP header (Remote-Party-ID)]
                [Severity level: Note]
                [Group: Undecoded]
        Contact: <sip:[email protected]:5060>
        Supported: sdp-anat
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Type: application/sdp
        Content-Disposition: session;handling=required
        Content-Length: 264
    Message Body
        Session Description Protocol
            Session Description Protocol Version (v): 0
            Owner/Creator, Session Id (o): CiscoSystemsSIP-GW-UserAgent 7991 6854 IN IP4 10.194.154.136
                Owner Username: CiscoSystemsSIP-GW-UserAgent
                Session ID: 7991
                Session Version: 6854
                Owner Network Type: IN
                Owner Address Type: IP4
                Owner Address: 10.194.154.136
            Session Name (s): SIP Call
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Time Description, active time (t): 0 0
                Session Start Time: 0
                Session Stop Time: 0
            Media Description, name and address (m): audio 17660 RTP/AVP 18 101
                Media Type: audio
                Media Port: 17660
                Media Protocol: RTP/AVP
                Media Format: ITU-T G.729
                Media Format: DynamicRTP-Type-101
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Media Attribute (a): rtpmap:18 G729/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 18
                MIME Type: G729
                Sample Rate: 8000
            Media Attribute (a): fmtp:18 annexb=no
                Media Attribute Fieldname: fmtp
                Media Format: 18 [G729]
                Media format specific parameters: annexb=no
            Media Attribute (a): rtpmap:101 telephone-event/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 101
                MIME Type: telephone-event
                Sample Rate: 8000
            Media Attribute (a): fmtp:101 0-16
                Media Attribute Fieldname: fmtp
                Media Format: 101 [telephone-event]
                Media format specific parameters: 0-16
No.     Time        Source                Destination           Protocol Info
     10 1.700567    10.194.154.136        171.68.115.156        SIP      Status: 100 Trying
Frame 10 (471 bytes on wire, 471 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 100 Trying
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100f04-2fde97a9
        From: <sip:[email protected]:5060>;tag=82f4d30-9c7344ab-13c4-45026-41c-5c20b753-41c
        To: <sip:[email protected]:5060>
        Date: Wed, 08 Sep 2010 20:47:51 GMT
        Call-ID: 80e5320-9c7344ab-13c4-45026-41c-7fbe4865-41c
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow-Events: telephone-event
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Length: 0
No.     Time        Source                Destination           Protocol Info
     11 1.726376    10.194.154.136        171.68.115.156        SIP/SDP Status: 200 OK, with session description
Frame 11 (1114 bytes on wire, 1114 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 200 OK
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100eca-13593e22
        From: <sip:[email protected]:5060>;tag=82f4b98-9c7344ab-13c4-45026-41c-669825d-41c
        To: <sip:[email protected]:5060>;tag=4864C1C-10F8
        Date: Wed, 08 Sep 2010 20:47:51 GMT
        Call-ID: 80e5138-9c7344ab-13c4-45026-41c-3f6bfc7-41c
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
        Allow-Events: telephone-event
        Remote-Party-ID: <sip:[email protected]>;party=called;screen=no;privacy=off
            [Expert Info (Note/Undecoded): Unrecognised SIP header (Remote-Party-ID)]
              [Message: Unrecognised SIP header (Remote-Party-ID)]
                [Severity level: Note]
                [Group: Undecoded]
        Contact: <sip:[email protected]:5060>
        Supported: replaces
        Supported: sdp-anat
        Server: Cisco-SIPGateway/IOS-12.x
        Content-Type: application/sdp
        Content-Disposition: session;handling=required
        Content-Length: 264
    Message Body
        Session Description Protocol
            Session Description Protocol Version (v): 0
            Owner/Creator, Session Id (o): CiscoSystemsSIP-GW-UserAgent 7991 6854 IN IP4 10.194.154.136
                Owner Username: CiscoSystemsSIP-GW-UserAgent
                Session ID: 7991
                Session Version: 6854
                Owner Network Type: IN
                Owner Address Type: IP4
                Owner Address: 10.194.154.136
            Session Name (s): SIP Call
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Time Description, active time (t): 0 0
                Session Start Time: 0
                Session Stop Time: 0
            Media Description, name and address (m): audio 17660 RTP/AVP 18 101
                Media Type: audio
                Media Port: 17660
                Media Protocol: RTP/AVP
                Media Format: ITU-T G.729
                Media Format: DynamicRTP-Type-101
            Connection Information (c): IN IP4 10.194.154.136
                Connection Network Type: IN
                Connection Address Type: IP4
                Connection Address: 10.194.154.136
            Media Attribute (a): rtpmap:18 G729/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 18
                MIME Type: G729
                Sample Rate: 8000
            Media Attribute (a): fmtp:18 annexb=no
                Media Attribute Fieldname: fmtp
                Media Format: 18 [G729]
                Media format specific parameters: annexb=no
            Media Attribute (a): rtpmap:101 telephone-event/8000
                Media Attribute Fieldname: rtpmap
                Media Format: 101
                MIME Type: telephone-event
                Sample Rate: 8000
            Media Attribute (a): fmtp:101 0-16
                Media Attribute Fieldname: fmtp
                Media Format: 101 [telephone-event]
                Media format specific parameters: 0-16
No.     Time        Source                Destination           Protocol Info
     13 1.727645    10.194.154.136        171.68.115.156        SIP      Status: 500 Internal Server Error
Frame 13 (526 bytes on wire, 526 bytes captured)
Ethernet II, Src: Cisco_0d:3c:c0 (00:1f:ca:0d:3c:c0), Dst: HewlettP_06:71:52 (00:1f:29:06:71:52)
Internet Protocol, Src: 10.194.154.136 (10.194.154.136), Dst: 171.68.115.156 (171.68.115.156)
User Datagram Protocol, Src Port: sip (5060), Dst Port: sip (5060)
Session Initiation Protocol
    Status-Line: SIP/2.0 500 Internal Server Error
    Message Header
        Via: SIP/2.0/UDP 171.68.115.156:5060;rport;branch=z9hG4bK-41c-100f04-2fde97a9
        From: <sip:[email protected]:5060>;tag=82f4d30-9c7344ab-13c4-45026-41c-5c20b753-41c
        To: <sip:[email protected]:5060>;tag=4864C50-3C3
        Date: Wed, 08 Sep 2010 20:47:51 GMT
        Call-ID: 80e5320-9c7344ab-13c4-45026-41c-7fbe4865-41c
        CSeq: 1 INVITE
            Sequence Number: 1
            Method: INVITE
        Allow-Events: telephone-event
        Server: Cisco-SIPGateway/IOS-12.x
        Reason: Q.850;cause=44
            Reason Protocols: Q.850
            Cause: 44(0x2c)[Requested circuit/channel not available]
        Content-Length: 0
Thanks!
-John

Since it appears you are a Cisco Employee, my recommendation is that you use the many internal resource available to you (including, but not limited to) , like TAC access, internal forums, team leaders, etc.
This not to give the casual reader, the impression that the best source of support at Cisco is a customer's public forum.

Error during self calibration - PXI-4461

We are running Calibration Executive 3.2. We are using a PXI chassis and controller and trying to calibrate a PXI-4461 card.
In running the procedure, we received the following error during Self Calibration:
Error 200718 occurred at DAQmx Self Calibration.VI at step self calibrate.
Any guidance in resolving this issue would be appreciated.
Richard

Here is the info from the calibration report. I can email you a PDF of the report and also a screen capture of the error message which states: "Measurement taken during calibration produced an invalid AI gain calibration constant. If performing an external calibration, ensure that the reference voltage passed to the calibration VI or function is correct. Repeat the calibration. If the error persists, conatct National Instruments Technical Support.
CALIBRATION PERFORMANCE TEST DATA
DUT Information
Type: PXI-4461
Tracking Number: 33367
Serial Number: 33367
Notes
Customer Information
Name: Cal Lab
Address:
Purchase Order:
Notes
Environmental Conditions
Temperature: 23.0 C
Humidity: 13.0 %
Operator Information
Operator Name: administrator
Calibration Date: Friday, March 23, 2007
16:27:03
Notes: Error or termination
occurred. This calibration
may not be valid. Error
code: -200718 Error
message: Error -200718
occurred at DAQmx Self
Calibrate.vi at step Self
Calibrate Possible
reason(s): Measurement
taken during calibration
produced an inval
PXI-4461 Serial Number: 33367
Friday, March 23, 2007 16:27:03 Page 1 of 2
Standards used during Calibration
Type Tracking Number Calibration Due Date Notes
Fluke 5500A Multifunction
Calibrator
32261 3/15/2008
DMM 32260 11/21/2007
33250A 29536 10/13/2007
Calibration Results
Test Canceled
Calibration As Found As Left
Test Value Low Limit Reading High Limit PassFail Low Limit Reading High Limit PassFail
N/A N/A N/A N/A N/A N/A N/A N/A N/A
PXI-4461 Serial Number: 33367
Friday, March 23, 2007 16:27:03 Page 2 of 2

Dropping Frames During Capture; Noticed QT Update.

Dear Friends,
I have Final Cut 4.5, Lacie 500gig drives, use for DV industrial projects, typically capturing 1 hr tapes in 15 min clips. Then, at 5min30sec +/-, capture freezes and an error msg tells me frames were dropped during capture. I have tried every config to troubleshoot, including erasing one of the drives. Right now I can batch 4min clips, any longer and I get dropped frames.
My last successful capture was on 10/22/07; QT updated to v7.3 on 10/23/07. I'm running OS10.3.9 and use a DSR-11.
Everything else seems to be operating fine. If the QT update is the culprit, how do I fix this? Or is there a different solution? I just want my perfectly-running Final Cut system back!!
Regards, Matt Alcorn

QT updated to v7.3 on 10/23/07.
Why did you do that? The most stable version of FCP 4.5 is with OS 10.3.9 and QT 6.5. Heck, even 7.1.6 works. BUT, why did you mess with a good thing?
NEVER mess with a good thing:
http://discussions.apple.com/thread.jspa?threadID=1275141&tstart=50
Shane

Error while transporting objects:Internal error during pvc call: Parameter

Dear all,
We are facing the following error while transporting the individual configuration objects from our PI development system.
Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
However, it works fine when the complete configuration scenario is transported.
We tried to transport the objects with different user id's, even then the issue still exists.
Any inputs to resolve this will be highly helpful.
Thank you,
Younus

Hi Mohammed,
Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
regards
Mickael
Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM

Unknown Error during Recovery - iPad no longer Recognized by iTunes

I have a 3rd Generation iPad which I was attempting to perform a factory reset. I received an "Unknown Error" during the process and from that point on I have been unable to get iTunes to recognize my iPad in recovery mode (or otherwise).
I have tried every thread on the subject, but I found one interesting thing. If I connect the iPad with the same cable, etc. to another computer it immediately recognizes it in recovery mode and offers to restore the iPad.
It seems like my computer is not recognizing the iPad because it was in the process of restoring the device when the error occurred. Does anyone know if there is a way to reset or fix this issue. I would prefer not to update iTunes and download both the new iTunes and iPad software again and use another computer if it is not necessary.
Any help would be appreciated.
Thanks

Hey KSHItunes,
That was a good test to try your iPad on another computer. It does seem to isolate the issue to something with your computer setup.
Although you would prefer not to update iTunes, there may be steps in this article which can help.
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Please check it out.
Regards,
Nubz

Win 8.1//Recover error at fourth supplemental disc//Detect some error during PININST_BBV.

Hii Team,
Please find the product details for your need full:-
Product number: F6C57PA#ACJ
Product: HP ENVY TouchSmart 15-j109tx Notebook PC (ENERGY STAR)
Issue- recovery attempt has failed select one of the three buttons.
Below is the error log in the notepad:-
[13:34:51.78] ChkErrBB.CMD : Detect some error during PININST_BBV.
[13:34:51.78] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[13:34:51.78] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
Tss to isolate the issue:- Bios updated no go, bios defaults no go, checked with another set of rcds but same issue on the fourth discs on different dvd's also.
RCD kit Part#:-
749548-D62
749549-D62
749550-D62
752228-B22
Error Comes at recovery dvd:- 752228-B22.
HP Experts kindly intervene with the case for a way out from the issue asap.

This is NOT official HP Customer Support and I, as most other persons on this forum, do not work for HP. This is a peer-to-peer user supported forum for HP consumer class products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Any reply from a HP employee represents their own opinion and not that of HP's.
Please see HP Forum thread Recovery - "Detect error during PININST_BBV – Fix: Set BIOS to Factory Defaults;
1) Boot computer – immediately click / press F10 to get into the BIOS Manager.
2) Press F9 to set the BIOS to factory default.
3) Press F10 to "Save and Exit"
4) Redo the Recovery – remember to leave the wireless light “on” during the Recovery
Other thing to try: don't use the supplemental disc... set the system date in BIOS to 2012... run "Minimized Recovery" instead of "Factory Reset"
I currently have the same issue with my HP 15t-j100 CTO and HP 13 Split x2 (both on loan from HP). I have tried various fixes/solutions posted on the forum, but haven't been successful in recovering my computers. In both cases I an using a USB Flash Drive set up as HP Recovery Media. It appears you are using an external CD/DVD drive and 4 DVDs as your HP Recovery Media. My computers display a "Restoration Incomplete" dialog box and CTOERROR.flg displays;
Please contact HP in your country / region, via the HP Worldwide Support Portal, for official HP assistance.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Microsoft office 2013 encountered an error during setup in Window 8.1

Initially, I got microsoft office 2013 64bit standard version installed in window 8.1. However, it suddenly got errors when opening office, and closed the program automatically. Therefore, I uninstalled it, and tried to re-install office.
However, I got the error "microsoft office 2013 encountered an error during setup" everytime when I try to install it.
I tried 32-bit and 64 bit version, and tried to install in clean boot, deleted registry, and modified the folder name "Microsoft Help", but none of them works.

Make sure you completely uninstall previous versions of Office. There may be remnants left behind, even after you uninstall Office using the normal procedure. I recommend using the “Fix It” utility to uninstall Office 2013 completely. Please refer to this
article: http://support.microsoft.com/kb/2739501/en-us you might also follow the manual steps provided on the same page.
If you still having problems, re-registering the Windows Installer and checking permissions on the %TEMP% folder and the C:\Windows\Installer folder to make sure you have full-control. To re-register the Windows Installer run the following commands:
msiexec /unregister
msiexec /register

Adobe Illustrator CS3: Fatal error during installation

Hello,
I just bought the AI CS3. It installed OK on my friend's laptop (windows). However, when I clicked the big button in the installation:
"Install Adobe Illustrator CS3"
A window showed:
Initializing Adobe Illustrator...
Then I got a message:
"Setup has encountered an error and cannot continue. Contact Adobe customer Support for assistance. Fatal error during installation".
I've tried several times. My computer meets all the requirements (it's a really new and faster PC). And there's no old versions of AI on it yet.
Can anyone help? Thanks!!!

Do you have any other Adobe products on your computer? When I installed CS3 on my Mac, I kept getting failures. After contacting Adobe, they told me I had to delete ALL other Adobe products -- including Flash and Adobe Reader. Plus, I had to do searches and delete any support files associated with them. It took hours!

Unable to monitor audio during capture

I'm using FCP6 to capture footage shot with a JVC GY-HD100U at HDV 720p24. I'm using a JVC BR-HD50 deck to capture from, connected to my MacPro 3 GHz quad via firewire.
In the Audio/Video Setting dialog box, the Sequence Preset is "HDV 720P24". My Capture Preset is "HDV", Device Control Preset "HDV FireWire". Video Playback shows "[Missing] Apple Firewire NTSC (720 x 480)" and offers only the options of None and Digital Cinema Desktop Preview–Main as alternate choices. Both HDV options are greyed out. The Audio Playback option is set to Default.
With this setup, controlling the deck remotely from the capture window, I get video but no audio. The only audio I get is when the deck is connected to my video monitor and I use it to monitor the output of the deck. The audio is there when I play back the clips after capture but I cannot monitor the sound with the computer's speakers. If I go to the A/V Devices tab, under Video, it shows the same "[Missing] Apple Firewire NTSC (720 x 480) with the same choices described above, and the Options button next to it doesn't do anything.
Can anyone think of anything I've missed in the initial setup?
Keith
Message was edited by: Keith R Thompson

Keith,
For whatever reason (perhaps the intense processor needs) HDV does not allow you to monitor your audio during capture. The computer just will not do it. What I have done, if I really want to hear what's happening durning capture, is plug my speakers into the headphone jack of my XL H1. Due to the processing that's going on, the audio "lags" behind the video by a couple of seconds.
I'm pretty sure this is not a setup problem, but just a limitation due to the nature of your format.
Hope that helps!
~Luke

Red interference during capture with FCP 5.1.4

I have FCP version 5.1.4 . I am using OSX 10.6 snow leopard (Macbook Pro). Have captured and edited without any problems. All of a sudden I am getting an interference during capture. This interference comes in the form of a bright red color which suddenly fills half my screen from corner to corner forming a right angled triangle and hiding half of my picture triangularly. it flashes and then remains. Anyone know what the **** this is and how I can rectify it?
I would be EXTREMELY for any help anyone can give me. Thanks in advance.

This is happening to me today as well. Has it got something to do with 10.6.7 I have just updated and now I seem to be having the same problem
Pleasa Help

0x00007001 error during capture

Similar Messages

Maybe you are looking for