0x80070241 error when I try upgrade Vista to Win 7 Pro
Hi,
I've tried unsuccessfully to upgrade bootcamp Windows Vista to Windows 7 Pro 32 bits. I burned the ISO file and I always get the error : 0x80070241 unable to copy files... when I try to upgrade
I redownload the iso upgrade. Same result. I tried to run it from C:\, same result.
Any idea why?
Thanks in advance
http://forums.bit-tech.net/showthread.php?t=177488
That from Google 0x80070570
Always better to use Windows Easy Transfer, then do a full clean install instead too.
Similar Messages
-
I am upgrading from iPhone 3 to 5. I have backed up my 3 on iTunes. I keep getting an error when I try to download all info to the 5. The error says I have disconnect my phone but I haven't. Happened multiple times. Any help would be appreciated.
Are you running iTunes 11.0.1 (current version)? If not, get it at http://www.apple.com/itunes
-
I get a runtime error when I try to open itunes, any help?
I get a runtime error when I try to open itunes, any help?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Show-stopping error when I try to load/run the muse code with JQuery version 1.9.1.
Version 1.9.1, and the muse code uses 1.8.3. As you can see HERE,http://jquery.com/download/ version 1.9.0 was a major milestone release for JQuery that eliminated much of the (deprecated) functionality of earlier versions. Unfortunately, the muse html uses some of that deprecated functionality (specifically, the "browser( )" function HERE)http://jquery.com/upgrade-guide/1.9/#jquery-browser-removed. Thus I am getting a show-stopping error when I try to load/run the muse code with version 1.9.1. Other people have had this same problem (see THIS)http://bugs.jquery.com/ticket/13214.
Do you see an update in the near future?Version 1.9.1, and the muse code uses 1.8.3. As you can see HERE,http://jquery.com/download/ version 1.9.0 was a major milestone release for JQuery that eliminated much of the (deprecated) functionality of earlier versions. Unfortunately, the muse html uses some of that deprecated functionality (specifically, the "browser( )" function HERE)http://jquery.com/upgrade-guide/1.9/#jquery-browser-removed. Thus I am getting a show-stopping error when I try to load/run the muse code with version 1.9.1. Other people have had this same problem (see THIS)http://bugs.jquery.com/ticket/13214.
Do you see an update in the near future? -
Receive TNS error when trying to upgrade DB
I receive a TNS error when I try to upgrade a database using the Database Upgrade Assistant. I want to upgrade to 9.2 from 8.1.7. When I click on the database I want to upgrade I receive the TNS error. It never prompts for a username/password@cstring.
I am trying to run this through Windows Terminal Service, is this the problem? I know there are issues trying to run server manager through WTS.
Thanks,
JimI'm new to this, but between Oracle 9.0 and 9.2 the required format appears to have changed for the "TNS Service Name" parameter for a "System DSN" in the Windows "ODBC Data Source Administrator". In 9.0 the "TNS Service Name" can be in either of two formats: global_database_name OR oracle_home$global_database_name. One can verify this by clicking the "Test Connection" button on the the "Oracle ODBC Driver Configuration" screen from the "ODBC Data Source Administrator" window. On a 9.2 system only the first format works. I tested this on freshly-installed systems, each with just one Oracle home and the default sample database.
Perhaps this is related to the problem you are encountering. I was able to fix a problem connecting to 9.2 by changing the "TNS Service Name" parameter. The error I was receiving was: "[Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve service name".
Can anyone point me to some documentation on this apparent change between 9.0 and 9.2? Thanks in advance. -
Installing my updated CS4 on a new I Mac: "legacy Java SE 6 runtime" error when i try to open psd
Bought the original Creative Suite package 1n 2004, installed on my new apple G5. Upgraded in 2009 to CS4 and sometime installed on a 2nd computer. I'm sure I registered each product. I don't have the original disk's, but I have the serial number. I'm trying to install CS on my new I Mac. It fails authorization in the download. I went ahead and downloaded the 30 day trail like suggested. I get the "legacy Java SE 6 runtime" error when i try to open psd. After my first attempt failed and I read the help lessons on deactivation, I believe I have deactivated from the G5, but I'm still getting the same code when trying to open psd.
Download and install: Java for OS X 2014-001
Reboot your Mac.
Let me know how it goes.
Gene -
I have upgraded all apps from CS5 to CC - but keep getting U43M1D207 error when trying to upgrade Illustrator. Tried twice. Help!
You can also use Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools
Direct Download Links for Adobe Software
Are you on a managed network. If yes please refer the Knowledge base article: http://helpx.adobe.com/creative-cloud/help/cc-desktop-download-error.html.
You may even try the direct download: http://prodesigntools.com/adobe-cc-direct-download-links.html.
Kindly follow the very important instructions before download.
It might help you.
Regards
Rajshree -
Have uploaded and installed CC 2014. Several apps give this error when I try to start them: "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders"
-or-
The icon in the dock bounces once, and nothing happens.Windows or Mac, and exactly which operating system version?
-
I am getting an Error when I try to open Firefox that Says Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. This has happened several times recently. I deinstalld and reinstalled but am still getting the error. Any thoughts?
This happens to me as well. However, I have a shortcut on my desktop as well as my quick start bar. When this has happened to me, I can usually log back in without restarting, by using the shortcut on the desktop rather than the usual quick start bar.
I know this sounds weird, but it has worked for me about 80% of the time. -
My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networkl.
Can't connect to the iTunes Store
Make sure that time zone is correct in addition to date and time -
I get the following error when I try to import a DB from my machine (9.2) to a 8.1.7.4 Unix (Sol 2.8) box. I can import locally on my 9.1 fine. Anyone hab=ve any ideas?
Thanks
Here is the message:
Import: Release 9.2.0.1.0 - Production on Wed Feb 5 07:46:50 2003
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production
With the Partitioning option
JServer Release 8.1.7.4.0 - Production
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00023: Import views not installed, please notify your DBA
IMP-00000: Import terminated unsuccessfullyHi,
Whenever you are exporting and importing database remember following rules;
1. The Import utility and the database to which data is being imported (the target database) must be the same version.
2. The version of the Export utility must be equal to the lowest version of the source or target database.
Good luck. :)
-San -
I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)".... I have uninstalled and reinstalled several times and the error still occurs!!! This started happening after I installed the 10.3 update
I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and some people said that they worked.
Here is the original Link:
https://discussions.apple.com/thread/2151777?start=0&tstart=0
OK, this worked for me:( Original Post by r0tt3n4pp13)
1. Save iTunes install file to your desktop.
2. Disconnect from internet.
3. Disable Firewall/Security software.
4. Run install. Note that it installs Application Support and a bunch of other software this time.
5. Run iTunes.
6. Enable Firewall/Security software.
7. Reconnect to internet.
8. Download Watchmen Director's Cut post haste.
OR!
(Original post by Cr4z33)
1. Download and install WinRAR.
2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
4. Done! You can now run iTunes normally. -
Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read" -DSC8416.NEF I've been importing the same type of photos with no errors then 2015 came along and now I can no longer import.
The error message is misleading, the problem is that you need WRITE privileges added to the destination directory tree.
Assuming you are using the "date" structure that LR defaults to, find the directory that contains the 2014 folder (the one that works) and add WRITE rights to the parent of "2014".
While you are there, if you want, add "2015" folder to beside "2014" and add READ and WRITE rights to that new directory. -
I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
The operation can’t be completed because an unexpected error occurred (error code -50)I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that. -
Why am I getting an ORA-04052 error when I try to compile a Procedure?
Hi,
The following procedure I'm getting an ORA-04052 error when I try to compile the following procedure.
CREATE OR REPLACE PROCEDURE APPS.Find_String (
pin_referenced_name IN dba_dependencies.referenced_name%TYPE)
IS
cursor cur_get_dependancy
is
SELECT distinct owner, name, type
FROM [email protected] -- prod.world
WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d'
AND referenced_type <> 'SYNONYM'
AND owner <> 'SYS'
order by name;
v_owner varchar2(40);
v_name varchar2(50);
v_type varchar2(40);
BEGIN
dbms_output.put_line(upper(pin_referenced_name)||' is found in the following objects.');
dbms_output.put_line(' ');
dbms_output.put_line(RPAD('OWNER', 30, ' ')||RPAD('NAME', 60, ' ')||RPAD('OBJECT TYPE', 30, ' '));
dbms_output.put_line('-------------------------------------------------------------------------------------------------------------------');
FOR i IN cur_get_dependancy
LOOP
v_owner := RPAD(i.owner, 30, ' ');
v_name := RPAD(i.name, 45, ' ');
v_type := RPAD(i.type, 30, ' ');
dbms_output.put_line(v_owner ||v_name|| v_type);
END LOOP;
END find_string;I'm using the link [email protected]. The procedure compiles for other database links used in the cursor including the one commented to the right of the code 'prod.world'.
What's even stranger is that I took the SELECT statement
SELECT distinct owner, name, type
FROM [email protected] -- prod.world
WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d'
AND referenced_type <> 'SYNONYM'
AND owner <> 'SYS'
order by name;out of the procedure and ran it on the command line using the @pinp.world link, the SQL statement ran just fine. But when I tried to compile the above procedure with that exact same SQL statement with the exact same link I get the following string of errors.
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-02068: following severe error from PINP
ORA-03113: end-of-file on communication channelHow can the link work just fine in a regular SQL statement but then cause an error when its compiled in code that otherwise compile just fine when using any other link or even just a plain database. Does anyone have any suggestions?OK Justin,
Here's the query by itself run in another database using the @pinp.world link and querying the dba_dependencies table in the pinp.world database. As you can see the query using this link works just fine returning the requested rows. I can't figure out why the compiler is having an issue with essentially this same query when I try to compile it in a cursor in TOAD. Also this is the database (dev1.world) that I'm trying to compile this Procedure in.
By the way I'm in an Oracle 9.2.0.6 database and TOAD v9.2.
SQL> conn apps/apps1@dev1
Connected.
SQL> SELECT distinct owner, name, type
2 FROM [email protected]
3 WHERE lower(referenced_name) = lower('ALL_USERS')
4 AND referenced_type <> 'SYNONYM'
5 AND owner <> 'SYS'
6 order by name;
OWNER NAME TYPE
PUBLIC ALL_USERS SYNONYM
XDB DBMS_XDBUTIL_INT PACKAGE BODY
XDB DBMS_XDBZ0 PACKAGE BODY
SYSTEM MVIEW_EVALUATIONS VIEW
SYSTEM MVIEW_EXCEPTIONS VIEW
SYSTEM MVIEW_FILTER VIEW
SYSTEM MVIEW_LOG VIEW
SYSTEM MVIEW_RECOMMENDATIONS VIEW
SYSTEM MVIEW_WORKLOAD VIEW
ORASSO WWCTX_API PACKAGE BODY
PORTAL WWCTX_API PACKAGE BODY
ORASSO WWEXP_UTL PACKAGE BODY
PORTAL WWEXP_UTL PACKAGE BODY
PORTAL WWPOB_API_PAGE PACKAGE BODY
PORTAL WWPOF PACKAGE BODY
ORASSO WWPRO_PROVIDER_VALIDATION PACKAGE BODY
PORTAL WWPRO_PROVIDER_VALIDATION PACKAGE BODY
PORTAL WWSBR_EDIT_ATTRIBUTE PACKAGE BODY
PORTAL WWSBR_FOLDER_PORTLET PACKAGE BODY
PORTAL WWSBR_USER_PAGES_PORTLET PACKAGE BODY
ORASSO WWUTL_API_PARSE PACKAGE BODY
OWNER NAME TYPE
PORTAL WWUTL_API_PARSE PACKAGE BODY
PORTAL WWUTL_EXPORT_IMPORT_LOV PACKAGE BODY
ORASSO WWUTL_LOV PACKAGE BODY
PORTAL WWUTL_LOV PACKAGE BODY
PORTAL WWV_CONTEXT PACKAGE BODY
PORTAL WWV_CONTEXT_UTIL PACKAGE BODY
PORTAL WWV_DDL PACKAGE BODY
PORTAL WWV_GENERATE_UTL PACKAGE BODY
PORTAL WWV_GLOBAL PACKAGE
PORTAL WWV_MONITOR_DATABASE PACKAGE BODY
PORTAL WWV_PARSE_AS_SPECIFIC_USER PACKAGE BODY
PORTAL WWV_PARSE_AS_USER PACKAGE BODY
PORTAL WWV_SYS_DML PACKAGE BODY
PORTAL WWV_SYS_RENDER_HIERARCHY PACKAGE BODY
PORTAL WWV_THINGSAVE PACKAGE BODY
PORTAL WWV_UTIL PACKAGE BODY
PORTAL WWV_UTLVALID PACKAGE BODY
38 rows selected.
SQL>Let me know what you think.
Thanks again.
Maybe you are looking for
-
Hi I paid my annual subscription on the 26th of November last year. I've installed both Lightroom and Photoshop and started using them quite successfully. Then I installed the same products on my home Mac and migrated all my Apperture libs to it. Eve
-
Any FM or report for SC/PO vendor combo
Hi, Is there any report or FM which will give me a list of documents (SC/PO/Contract) for a vendor. Points will be rewarded for the useful answers. Ingen Edited by: Autobots 21 on Mar 25, 2008 1:46 PM
-
I can't download adobe reader. Error 1311 Source file not found
-
Acrobat Reader Redistribute wrong version
Hi all, I registered for redistribute Acrobat Reader in our network. Adobe sent me the link to download the file. Unzip the file which has Setup.exe, AcroRead.msi and other files. If I manually install it by double click on Setup.exe file, I got t
-
I've imported videos into Aperture and now I want to move them (not copy them). How do I do that? I know I can export them but is that the same as move them (if I delete them from Aperture afterwards)?