0x80992013 cannot access itunes store I have tried all of the suggested things on previous discussions but still not working. Any suggestions?
When I try to open itunes on my school network windows Xp computer I get an error message with this code 0x80092013. I have tried all of the suggestions from apple support document but nothing has worked.
Have you left the iPod to charge for a couple of hours and then tried resetting it again? It can take up to at least 30 minutes of charging before an iPod with a dead battery shows any signs of life. By a reset, I assume you mean pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear?
iPod won't turn on
B-rock
Similar Messages
-
I need to delete an empty folder. I tried all of the possible things to delete it, but still whitout any luck. Restarted the phone, updated software, etc... Please help ! Thank you.
Try to drag an app into folder and then drag it out.
Or reset you iPhone. Hold down Power and Home buttons until Apple logo appears. Release and wait to reboot. -
Hi, I have an iPhone 3G. I had it unlocked by Apple, now my Apps don't work. They open then immediatly close again. I have tried: syncing, reseting, reloading the Apps. Can anyone help!?
settings->store and make sure your appleID is set correctly if it's not then what you exp would happen
-
Hi all
i am trying to access iTune store but keep on getting message "cannot access iTune store" i have reset my password several times and it didn’t help. My apple ID has been confirmed as correct. what can I do next?I am having the same issue! I see several people are having this problem, and I see there is no solution from Apple! Why is it I only see problems on this site and never any solutions?
-
HT1212 i have tried all of the suggested things still cant get in the ipod
i have tried all of the suggested things and still cant get in the ipod
As instructed in the If you have never synced your device with iTunes, or you do not have access to a computer section of the article, put it in recovery mode and restore:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device. -
My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help? It is her computer, a iMac G3 or G4 with superdrive, the one with the ball shaped base. Thank you.
It's a tray loading drive, there should be a little hole next to it, just large enough for a paper clip. Stick the end of the paper clip in it and the tray should open.
Miriam -
i can't open my itunes , i tried to delete it and install it back already but still not working , please help
No , it is something crushed in my computer ? i keep re-download it and tried to download some old version itunes my computer is a Window 7 . i can't backup my iphone and ipad now pleses help , thank you
-
I have tried all of the suggestions and still keeps asking me to authorize my computer for only a few songs that I have purchased.... HELP???!!!
Delete and redownload them if doing so is free in your country.
(69918) -
My iPad keeps crashing and I have tried all suggestions and they worked but not for long. Any suggestions? Very frustrated.
If you really tried all of the suggestions in all of the forums, there is nothing left to try. Make an appointment at an Apple Store and ask for their help. They have more sophisticated means of diagnosing and restoring than we have as device users.
-
Like others, I have the problem that itunes works but when I try to access the itunes store the status bar will stop half way through the process. After another 5 seconds or so it just completes with a blank screen.
Windows 7 Ultra 64 bit (fully updated)
Itunes 10.5
Internet Explorer
The itunes connectivity tests pass.. which I assume mean ports, DNS, adapters, firewalls are all ok. Valid assumption?
I can acces secure websites from the browser.
I've completely uninstalled and then reinstalled all of the apple applications as per apple instructions.
I've "fixed" the host file as per Microsoft instructions.
I've run Itunes as an administrator.
I've now reached the limit of my understanding of what can be done. Suggestions?
Thanks in advance.Check this Apple document out -> iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
Does your computer have one of those LSPs? If it does, try following the steps to reset the Winsock key.
1. To do so, please do the following in an administrator user:
Windows Vista and Windows 7: Right click All Programs and choose Accessories > Command Prompt. Choose to open as an administrator.
Windows XP: Click Start > Run and type in cmd.
2. Enter the following command:
netsh winsock reset
3. Restart the computer and test the issue.
Note: If the issue returns, third-party software may be reinserting the LSP. -
I cannot read books on my iPad that I have already purchased and store on my kindle fire and kindle ereader..I have tried to delete app an reregister, to no avail..help!
Have you asked on the kindle board? since it's their app that's messing up they may have more specific advice.
-
When I try to enter my customer number to log into my online banking website, an error message reads:
This form has been re-submitted. Re-enter your customer number and submit only once.
When I called the bank to find out if they could help they said it was a browser issue and suggested I should use IE or Chrome (No thanks!).
I have gone through all of the Firefox suggested troubleshooting fixes including deleting the cookie files. I have not yet tried resetting Firefox as I was hoping for a simpler solution before taking this step.
Thanks for any help you may be able to offer.If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Exactly what it says above. I have an iPod classic. (5th gen I think). My iPhone syncs up fine.
You must not have done ALL the steps. What version of iTunes are you using?
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
Cheers, Tom -
HT1212 i have tried all of the steps above, and my ipod touch still will not reset.
I have tried everything to reset my password but nothing is working. The lock screen continues to pop up instead of the USB screen.
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Or try using this program to place the iPod in recovery mode
RecBoot: Easy Way to Put iPhone into Recovery Mode -
I have scoured these pages and cannot find a solution (is there one?) to the problem I have in printing to the default printer that I selected in Print & Fax. The documents were originally created in Appleworks (preceded iWorks/Pages) and "converted" to Pages by simply dragging them to a blank Pages template. Of course, I can select the desired printer in the Print dialog window but this can get tedious when printing multiple items. Any help would be greatly appreciated.
This bug has existed for as long as Pages has, since iWork '05, & still has not been fixed.
The best workaround I've heard of is to create a desktop printer & drag the files to it to print.
And, most important, leave feedback for Apple, making sure you classify it as a bug. You can find it under the Pages menu > Provide Pages Feedback.
Maybe you are looking for
-
Report for material aging in stock
Hi , I need to create batchwise material aging report availible in stock. I am fatching most of fields from mseg table and I am taking ERFMG from mseg for stock availibility. Is am going in right direction. please guide me for this. Regards, Seema.
-
Hi All, Can I give a condition in process flow stating that when a mapping is completed with success or completed with warning then continue to next mapping but when It fails with error then to to END_ERROR.? I mean if during success or warning. Rega
-
I need to reinstall my PSE 13 but do not have disc. Can I use the numbers found on the package to reinstall it? How would I go about doing this? HELP PLEASE
-
I haven't seen any posts on the D80, though I would have expected them by now. I'm just curious how others consider it as an upgrade from the D70, my current camera, and whether the RAW files are accessible in Photoshop. It seems there is a beta vers
-
What's the difference between the Core 2 Duo and the Core Duo
I recently bought a new Macbook (Original) with an Intel Core 2 Duo processor. I gave my old one to my younger cousin. It has just an Intel Core Duo processor. What does that "2" mean? Does it mean the processor is faster? I was guessing it means tha